On 25.09.14 15:21, Bjørn Kristiansen wrote:
Hello. I have a Emcoturn 140 lathe. i am going to use linuxcnc for
retrofitting, and i will use the 5 ph stepper drives. but does anyone
know anything about step timing for these drives?
Hej Bjørn,
If your stepper drives aren't here:
http://wiki.linuxcnc.org/cgi-bin/wiki.pl?Stepper_Drive_Timing
then we'd need to know the manufacturer and model number of your drives
in order to know whether we have used anything similar.
Are your drives second-hand, so that you don't have any data?
Erik
--
Investment in infrastructure accounts for much of China's GDP - the country is
said to have built the equivalent of Rome every two months in the past decade.
And with such a large pool of labour, it is harder to put the brakes on when
growth slows and supply outstrips demand. -
http://www.bbc.com/news/magazine-19049254
--
Meet PCI DSS 3.0 Compliance Requirements with EventLog Analyzer
Achieve PCI DSS 3.0 Compliant Status with Out-of-the-box PCI DSS Reports
Are you Audit-Ready for PCI DSS 3.0 Compliance? Download White paper
Comply to PCI DSS 3.0 Requirement 10 and 11.5 with EventLog Analyzer
http://pubads.g.doubleclick.net/gampad/clk?id=154622311iu=/4140/ostg.clktrk
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users