Re: [Emc-users] I wonder if this would be a good LinuxCNC candidate?
That's a good price. I have tested a NUC with the N3050 cpu and it had good latency under PREEMPT-RT, but the processor is just a tad slow. In my opinion it would be fine for linuxcnc but might not like doing other things very well while linuxcnc is running. I think you will need a newer kernel and all than wheezy in order to support the hardware properly as well - jessie might work. On 08/07/2018 08:22 AM, andy pugh wrote: https://www.mini-itx.com/~EL-20-3050-32GB (Reduced to £100, UK seller, so likely only of interest in the EU) Dual LAN might make it a nice fit for the the 7i80 and friends. -- Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
[Emc-users] I wonder if this would be a good LinuxCNC candidate?
https://www.mini-itx.com/~EL-20-3050-32GB (Reduced to £100, UK seller, so likely only of interest in the EU) Dual LAN might make it a nice fit for the the 7i80 and friends. -- atp "A motorcycle is a bicycle with a pandemonium attachment and is designed for the especial use of mechanical geniuses, daredevils and lunatics." — George Fitch, Atlanta Constitution Newspaper, 1916 -- Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users