Gentlemen, Using the search "linuxcnc gcode" in a browser I see the Quick Code Reference.
The G81 reference shows a possible P symbol. When you click the G81 link the information there is no shown P symbol. The latest 2.7 release doesn't allow a P symbol on the G81 line. The G82 Quick Code Reference shows the P symbol also. The G82 link shows the P symbol also. The latest 2.7 release allows the use of the P symbol. The G85 has the same inconsistency as the G81 and the same result on the control. The G86 works like the G82. thanks Stuart -- Addressee is the intended audience. If you are not the addressee then my consent is not given for you to read this email furthermore it is my wish you would close this without saving or reading, and cease and desist from saving or opening my private correspondence. Thank you for honoring my wish. ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
