Andy and Seb,
Well I guess I jumped the gun. I didn’t think anybody was going to have any
suggestions, so, I installed Buster and LinuxCNC 2.8.2. I think your
suggestions are worth trying so I may try reinstalling Bullseye and see
what happens with those suggestions. However, I am tied up at the moment,
so, it may take a couple days before I can get to it.
Thanks,
Alan
> -- Forwarded message --
> From: andy pugh
> To: "Enhanced Machine Controller (EMC)"
> Cc:
> Bcc:
> Date: Wed, 11 May 2022 08:49:23 +0100
> Subject: Re: [Emc-users] Linuxcnc development machine
> On Mon, 9 May 2022 at 17:02, Alan Condit wrote:
>
> > The only problem that I am having is that if I am not using it for a few
> minutes it shuts down. Several other Bullseye users have reported similar
> behavior. So, I’m wondering if I should go back to Buster?
>
> Complete shutdown or just display blanking?
> Sometimes it can be hard to tell if the machine doesn't want to wake.
>
> Can you ssh in to it when it is "off"
>
> Have a look around the seb for disabling dpms as a starting point.
>
> --
> atp
> "A motorcycle is a bicycle with a pandemonium attachment and is
> designed for the especial use of mechanical geniuses, daredevils and
> lunatics."
> — George Fitch, Atlanta Constitution Newspaper, 1912
>
> -- Forwarded message --
> From: Bari
> To: emc-users@lists.sourceforge.net
> Cc:
> Bcc:
> Date: Wed, 11 May 2022 03:11:49 -0500
> Subject: Re: [Emc-users] Linuxcnc development machine
> On 5/9/22 10:57, Alan Condit wrote:
> > I just rebuilt my late 2012 MacMini to be a Debian Bullseye machine. I
> setup a development environment on it. I loaded it with the source for
> Preempt-RT 5.15.41 and built a 64 bit kernel for my RaspberryPi 4.
> >
> > The only problem that I am having is that if I am not using it for a few
> minutes it shuts down. Several other Bullseye users have reported similar
> behavior. So, I’m wondering if I should go back to Buster?
> >
> > Thanks,
> > Alan
>
>
> I have been using Bullseye with LCNC 2.9 for over a month now 24/7 with
> no shutdowns or blanking ever.
>
> Have you turned off the screensaver and turned off blanking in the power
> management settings?
>
>
> -Bari
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
