Re: [Emc-users] Would this blower be usefull as a low pressure mister for this 6040 (Les Newell)
Hi Wallace, I attached a pic in my previous post. I have attached that pic plus one with the nozzle disassembled. Les On 13/02/2019 09:36, Marshland Engineering wrote: Any chance of a picture or sketch. I can't visualize your description. Thanks Wallace New Zealand. ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
Re: [Emc-users] Would this blower be usefull as a low pressure mister for this 6040 (Les Newell)
I extended the oil jet using 2mm stainless tube so it now >sticks out about 1.5" past the end of the brass nozzle. This leaves a >thin annular gap for the air to get out. As the area of the air jet is >now very small you can run quite high pressure (60 - 100 psi) with very >low flow. By the time the air reaches the end of the oil jet it has >slowed down a lot and no longer has the energy to? break the oil into a >fine mist. You end up with a column of air carrying a stream of droplets >in the middle. Any chance of a picture or sketch. I can't visualize your description. Thanks Wallace New Zealand. ___ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
