Re: [Emc-users] cable connector for lcda357H stepper_servo

[dave engvall]

 Mucho thanks everyone for all the help. Ebay looked good but fallback 
would be Digikey.

Note: I'm not tight, I just squeak a little when I walk.
Have an order in for 5 in case I need spares.

Dave

On 5/23/22 2:40 PM, gene heskett wrote:

On Monday, 23 May 2022 15:01:15 EDT Rob C wrote:

If it's the green connector, just search google for 6 pin 5.08 mm screw
terminal and you will get these sort of hits:
https://www.amazon.co.uk/dp/B0924QD2T2?tag=amz-mkt-chr-uk-21=
1ba00-01000-org00-win10-other-smile-uk000-pcomp-feature-scomp-feature-s
comp=aa_scomp

This link above is the wrong size, its too big.

This s/b the digikey for this 3.81 mm sized plug:



https://www.google.com/search?q=6+pin+5.08+screw+terminal=1C1GCEA_e
nGB928GB928=ALiCzsZ_Zu8IuD736JHpZK01OeIrOj8YVw:1653332340188
ce=lnms=isch=X=2ahUKEwi7mdT2pvb3AhXDoFwKHbE_BeQQ_AUoAXoECAEQ
Aw=1229=531=1.56
On Mon, 23 May 2022 at 19:58, Rob C  wrote:

Is this the green connector plug?

On Mon, 23 May 2022 at 18:57, andy pugh  wrote:

On Mon, 23 May 2022 at 18:41, dave engvall 

wrote:

Can anyone provide a part number, eg. manufacturer or digikey, etc
number for the 6 pin encoder cable connector on the LCDA357H
controller.>>

Google has shown a number of options (including DE-09)

Can you find a photo, and measure the pin pitch?

--
atp
"A motorcycle is a bicycle with a pandemonium attachment and is
designed for the especial use of mechanical geniuses, daredevils and
lunatics."
— George Fitch, Atlanta Constitution Newspaper, 1912


___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users

___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users


Cheers, Gene Heskett.




___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users

Re: [Emc-users] cable connector for lcda357H stepper_servo

[gene heskett]

On Monday, 23 May 2022 15:01:15 EDT Rob C wrote:
> If it's the green connector, just search google for 6 pin 5.08 mm screw
> terminal and you will get these sort of hits:
> https://www.amazon.co.uk/dp/B0924QD2T2?tag=amz-mkt-chr-uk-21=
> 1ba00-01000-org00-win10-other-smile-uk000-pcomp-feature-scomp-feature-s
> comp=aa_scomp
This link above is the wrong size, its too big.

This s/b the digikey for this 3.81 mm sized plug:


> https://www.google.com/search?q=6+pin+5.08+screw+terminal=1C1GCEA_e
> nGB928GB928=ALiCzsZ_Zu8IuD736JHpZK01OeIrOj8YVw:1653332340188
> ce=lnms=isch=X=2ahUKEwi7mdT2pvb3AhXDoFwKHbE_BeQQ_AUoAXoECAEQ
> Aw=1229=531=1.56
> On Mon, 23 May 2022 at 19:58, Rob C  wrote:
> > Is this the green connector plug?
> > 
> > On Mon, 23 May 2022 at 18:57, andy pugh  wrote:
> >> On Mon, 23 May 2022 at 18:41, dave engvall  
wrote:
> >> > Can anyone provide a part number, eg. manufacturer or digikey, etc
> >> > number for the 6 pin encoder cable connector on the LCDA357H
> >> > controller.>> 
> >> Google has shown a number of options (including DE-09)
> >> 
> >> Can you find a photo, and measure the pin pitch?
> >> 
> >> --
> >> atp
> >> "A motorcycle is a bicycle with a pandemonium attachment and is
> >> designed for the especial use of mechanical geniuses, daredevils and
> >> lunatics."
> >> — George Fitch, Atlanta Constitution Newspaper, 1912
> >> 
> >> 
> >> ___
> >> Emc-users mailing list
> >> Emc-users@lists.sourceforge.net
> >> https://lists.sourceforge.net/lists/listinfo/emc-users
> 
> ___
> Emc-users mailing list
> Emc-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/emc-users


Cheers, Gene Heskett.
-- 
"There are four boxes to be used in defense of liberty:
 soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author, 1940)
If we desire respect for the law, we must first make the law respectable.
 - Louis D. Brandeis





___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users

Re: [Emc-users] cable connector for lcda357H stepper_servo

[gene heskett]

On Monday, 23 May 2022 14:58:33 EDT Rob C wrote:
> Is this the green connector plug?

Yes. I gave him the missing cable data, by PM but my plugs were from 
fleabay at the time, and unlabled as to a ready part number.

When searching to buy these 3 phase stepper/servo's, make sure the pix of 
the kit shows BOTH motor cables. I neglected to warn Dave about that, my 
bad.

Thank you for helping Dave find the right connector.

Cheers, Gene Heskett.
-- 
"There are four boxes to be used in defense of liberty:
 soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author, 1940)
If we desire respect for the law, we must first make the law respectable.
 - Louis D. Brandeis





___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users

Re: [Emc-users] cable connector for lcda357H stepper_servo

[Rob C]

If it's the green connector, just search google for 6 pin 5.08 mm screw
terminal and you will get these sort of hits:
https://www.amazon.co.uk/dp/B0924QD2T2?tag=amz-mkt-chr-uk-21=1ba00-01000-org00-win10-other-smile-uk000-pcomp-feature-scomp-feature-scomp=aa_scomp

https://www.google.com/search?q=6+pin+5.08+screw+terminal=1C1GCEA_enGB928GB928=ALiCzsZ_Zu8IuD736JHpZK01OeIrOj8YVw:1653332340188=lnms=isch=X=2ahUKEwi7mdT2pvb3AhXDoFwKHbE_BeQQ_AUoAXoECAEQAw=1229=531=1.56



On Mon, 23 May 2022 at 19:58, Rob C  wrote:

> Is this the green connector plug?
>
> On Mon, 23 May 2022 at 18:57, andy pugh  wrote:
>
>> On Mon, 23 May 2022 at 18:41, dave engvall  wrote:
>>
>> > Can anyone provide a part number, eg. manufacturer or digikey, etc
>> > number for the 6 pin encoder cable connector on the LCDA357H controller.
>>
>> Google has shown a number of options (including DE-09)
>>
>> Can you find a photo, and measure the pin pitch?
>>
>> --
>> atp
>> "A motorcycle is a bicycle with a pandemonium attachment and is
>> designed for the especial use of mechanical geniuses, daredevils and
>> lunatics."
>> — George Fitch, Atlanta Constitution Newspaper, 1912
>>
>>
>> ___
>> Emc-users mailing list
>> Emc-users@lists.sourceforge.net
>> https://lists.sourceforge.net/lists/listinfo/emc-users
>>
>

___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users

Re: [Emc-users] cable connector for lcda357H stepper_servo

[Rob C]

Is this the green connector plug?

On Mon, 23 May 2022 at 18:57, andy pugh  wrote:

> On Mon, 23 May 2022 at 18:41, dave engvall  wrote:
>
> > Can anyone provide a part number, eg. manufacturer or digikey, etc
> > number for the 6 pin encoder cable connector on the LCDA357H controller.
>
> Google has shown a number of options (including DE-09)
>
> Can you find a photo, and measure the pin pitch?
>
> --
> atp
> "A motorcycle is a bicycle with a pandemonium attachment and is
> designed for the especial use of mechanical geniuses, daredevils and
> lunatics."
> — George Fitch, Atlanta Constitution Newspaper, 1912
>
>
> ___
> Emc-users mailing list
> Emc-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/emc-users
>

___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users

Re: [Emc-users] cable connector for lcda357H stepper_servo

[andy pugh]

On Mon, 23 May 2022 at 18:41, dave engvall  wrote:

> Can anyone provide a part number, eg. manufacturer or digikey, etc
> number for the 6 pin encoder cable connector on the LCDA357H controller.

Google has shown a number of options (including DE-09)

Can you find a photo, and measure the pin pitch?

-- 
atp
"A motorcycle is a bicycle with a pandemonium attachment and is
designed for the especial use of mechanical geniuses, daredevils and
lunatics."
— George Fitch, Atlanta Constitution Newspaper, 1912


___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users

[Emc-users] cable connector for lcda357H stepper_servo

[dave engvall]

Hi all,
Can anyone provide a part number, eg. manufacturer or digikey, etc 
number for the 6 pin encoder cable connector on the LCDA357H controller. 
It should be identical to the cable end for the 6 pin connector for 
pul+, plu-, etc.

As always I appreciate the help. As I age I seem to need more of it. ;-)

Dave


___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users