On Fri, 14 Feb 2020 08:14:18 -0800 Chris Albertson <albertson.ch...@gmail.com> wrote:
> Looking at the PDF, It seems I forget to ask one question about the signal: > Is the sin/cos signal single-ended or differential? In other words is it > referenced to ground or do we get pins with labels like sin+ and sin- These kind of signals is usually used for resolvers, very common on servo motors, there are special chips available to excite and decode this, PGA411 is one. Be aware that there might be some kind of delay in signal decoding, think you could get a transfer function for this, if signal is 10kHz I would guess at least one full period is needed to track signal with good accuracy. Analog devices have some with 16 bit resolution per turn, expensive for an integrated circuit but maybe not compared to machine guess it depend on accuracy of machine. Regards Nicklas Karlsson _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users