Re: [etherlab-users] How to make ipk/deb package for IgH EtherCAT Master?
Hi again, looking at the bottom of the mail, the file still seems to be in the archive: http://lists.etherlab.org/pipermail/etherlab-users/attachments/20141112/c165be99/attachment-0001.bin Rename the file extension into tar.bz2 to extract the data. This contains the debian folder which you can use to start building dkms packages based on the 1.5.2 release of the EtherCAT master. Best regards, Christoph On 12/04/2017 11:50 AM, Christoph Schroeder wrote: Hi, the komaxgroup did debianize the master as dkms packages (see: http://lists.etherlab.org/pipermail/etherlab-users/2014/002650.html). Unfortunately the links from 2014 are already down. Best regards, Christoph On 12/04/2017 01:52 AM, Mike O'Connor wrote: On 2/12/2017 6:13 AM, Jiarui Lian wrote: Hi everyone, here is my scenario: * I want to cross-compile the IgH EtherCAT Master on powerful linux host, as it is faster! * (And I finished cross-compile on host: “make, make modules”) * Then I want to make an .ipk or .deb packages, to be copied/installed on embedded target. * So how to make .ipk/.deb package for IgH EtherCAT Master? Thanks! Jerry Hi Jerry There is a GitHub repo to build deb packages https://github.com/sittner/ec-debianize This does not create a dkms package, I'm sure there was work done on this but I can not find it. Cheers Mike ___ etherlab-users mailing list etherlab-users@etherlab.org http://lists.etherlab.org/mailman/listinfo/etherlab-users Helmholtz-Zentrum Berlin für Materialien und Energie GmbH Mitglied der Hermann von Helmholtz-Gemeinschaft Deutscher Forschungszentren e.V. Aufsichtsrat: Vorsitzender Dr. Karl Eugen Huthmacher, stv. Vorsitzende Dr. Jutta Koch-Unterseher Geschäftsführung: Prof. Dr. Bernd Rech (kommissarisch), Thomas Frederking Sitz Berlin, AG Charlottenburg, 89 HRB 5583 Postadresse: Hahn-Meitner-Platz 1 D-14109 Berlin http://www.helmholtz-berlin.de ___ etherlab-users mailing list etherlab-users@etherlab.org http://lists.etherlab.org/mailman/listinfo/etherlab-users Helmholtz-Zentrum Berlin für Materialien und Energie GmbH Mitglied der Hermann von Helmholtz-Gemeinschaft Deutscher Forschungszentren e.V. Aufsichtsrat: Vorsitzender Dr. Karl Eugen Huthmacher, stv. Vorsitzende Dr. Jutta Koch-Unterseher Geschäftsführung: Prof. Dr. Bernd Rech (kommissarisch), Thomas Frederking Sitz Berlin, AG Charlottenburg, 89 HRB 5583 Postadresse: Hahn-Meitner-Platz 1 D-14109 Berlin http://www.helmholtz-berlin.de ___ etherlab-users mailing list etherlab-users@etherlab.org http://lists.etherlab.org/mailman/listinfo/etherlab-users
Re: [etherlab-users] How to make ipk/deb package for IgH EtherCAT Master?
Hi, the komaxgroup did debianize the master as dkms packages (see: http://lists.etherlab.org/pipermail/etherlab-users/2014/002650.html). Unfortunately the links from 2014 are already down. Best regards, Christoph On 12/04/2017 01:52 AM, Mike O'Connor wrote: On 2/12/2017 6:13 AM, Jiarui Lian wrote: Hi everyone, here is my scenario: * I want to cross-compile the IgH EtherCAT Master on powerful linux host, as it is faster! * (And I finished cross-compile on host: “make, make modules”) * Then I want to make an .ipk or .deb packages, to be copied/installed on embedded target. * So how to make .ipk/.deb package for IgH EtherCAT Master? Thanks! Jerry Hi Jerry There is a GitHub repo to build deb packages https://github.com/sittner/ec-debianize This does not create a dkms package, I'm sure there was work done on this but I can not find it. Cheers Mike ___ etherlab-users mailing list etherlab-users@etherlab.org http://lists.etherlab.org/mailman/listinfo/etherlab-users Helmholtz-Zentrum Berlin für Materialien und Energie GmbH Mitglied der Hermann von Helmholtz-Gemeinschaft Deutscher Forschungszentren e.V. Aufsichtsrat: Vorsitzender Dr. Karl Eugen Huthmacher, stv. Vorsitzende Dr. Jutta Koch-Unterseher Geschäftsführung: Prof. Dr. Bernd Rech (kommissarisch), Thomas Frederking Sitz Berlin, AG Charlottenburg, 89 HRB 5583 Postadresse: Hahn-Meitner-Platz 1 D-14109 Berlin http://www.helmholtz-berlin.de ___ etherlab-users mailing list etherlab-users@etherlab.org http://lists.etherlab.org/mailman/listinfo/etherlab-users
Re: [etherlab-users] How to make ipk/deb package for IgH EtherCAT Master?
On 2/12/2017 6:13 AM, Jiarui Lian wrote: > > Hi everyone, here is my scenario: > > * I want to cross-compile the IgH EtherCAT Master on powerful linux > host, as it is faster! > * (And I finished cross-compile on host: “make, make modules”) > * Then I want to make an .ipk or .deb packages, to be > copied/installed on embedded target. > * So how to make .ipk/.deb package for IgH EtherCAT Master? > > > > Thanks! > > Jerry > Hi Jerry There is a GitHub repo to build deb packages https://github.com/sittner/ec-debianize This does not create a dkms package, I'm sure there was work done on this but I can not find it. Cheers Mike ___ etherlab-users mailing list etherlab-users@etherlab.org http://lists.etherlab.org/mailman/listinfo/etherlab-users
Re: [etherlab-users] How to make ipk/deb package for IgH EtherCAT Master?
Sorry, that should have been "make modules_install". From: Gavin Lambert Sent: Monday, 4 December 2017 11:49 To: 'Jiarui Lian' <je...@bertec.com>; etherlab-users@etherlab.org Subject: Re: [etherlab-users] How to make ipk/deb package for IgH EtherCAT Master? There isn't any built-in support for this. However it's a fairly standard autotools package so you can follow generic instructions for building a deb or whatever from an autotools makefile, for the most part. Bear in mind that you need to make sure to build against the kernel headers from the target system, which might be different from your development system. If the two systems are too far different you might have issues with shared libraries as well. Consider building using a cloned chroot of the target system, although that can bring its own set of hassles. You'll want to read up instructions for building a deb from autotools elsewhere, but there are two key commands that will end up part of it somehow: * DESTDIR=/some/path make install (will install the user tools to the specified directory as if it were the root) * INSTALL_MOD_PATH=/some/path make module_install (will install the kernel modules similarly) These will get you a directory containing the files that need to be installed, which will be an input to any of the packaging systems. Or you can just tar it up and install it manually if you prefer. From: Jiarui Lian Sent: Saturday, 2 December 2017 08:43 To: etherlab-users@etherlab.org <mailto:etherlab-users@etherlab.org> Subject: [etherlab-users] How to make ipk/deb package for IgH EtherCAT Master? Hi everyone, here is my scenario: * I want to cross-compile the IgH EtherCAT Master on powerful linux host, as it is faster! * (And I finished cross-compile on host: "make, make modules") * Then I want to make an .ipk or .deb packages, to be copied/installed on embedded target. * So how to make .ipk/.deb package for IgH EtherCAT Master? Thanks! Jerry ___ etherlab-users mailing list etherlab-users@etherlab.org http://lists.etherlab.org/mailman/listinfo/etherlab-users
Re: [etherlab-users] How to make ipk/deb package for IgH EtherCAT Master?
There isn't any built-in support for this. However it's a fairly standard autotools package so you can follow generic instructions for building a deb or whatever from an autotools makefile, for the most part. Bear in mind that you need to make sure to build against the kernel headers from the target system, which might be different from your development system. If the two systems are too far different you might have issues with shared libraries as well. Consider building using a cloned chroot of the target system, although that can bring its own set of hassles. You'll want to read up instructions for building a deb from autotools elsewhere, but there are two key commands that will end up part of it somehow: * DESTDIR=/some/path make install (will install the user tools to the specified directory as if it were the root) * INSTALL_MOD_PATH=/some/path make module_install (will install the kernel modules similarly) These will get you a directory containing the files that need to be installed, which will be an input to any of the packaging systems. Or you can just tar it up and install it manually if you prefer. From: Jiarui Lian Sent: Saturday, 2 December 2017 08:43 To: etherlab-users@etherlab.org Subject: [etherlab-users] How to make ipk/deb package for IgH EtherCAT Master? Hi everyone, here is my scenario: * I want to cross-compile the IgH EtherCAT Master on powerful linux host, as it is faster! * (And I finished cross-compile on host: "make, make modules") * Then I want to make an .ipk or .deb packages, to be copied/installed on embedded target. * So how to make .ipk/.deb package for IgH EtherCAT Master? Thanks! Jerry ___ etherlab-users mailing list etherlab-users@etherlab.org http://lists.etherlab.org/mailman/listinfo/etherlab-users
[etherlab-users] How to make ipk/deb package for IgH EtherCAT Master?
Hi everyone, here is my scenario: * I want to cross-compile the IgH EtherCAT Master on powerful linux host, as it is faster! * (And I finished cross-compile on host: "make, make modules") * Then I want to make an .ipk or .deb packages, to be copied/installed on embedded target. * So how to make .ipk/.deb package for IgH EtherCAT Master? Thanks! Jerry ___ etherlab-users mailing list etherlab-users@etherlab.org http://lists.etherlab.org/mailman/listinfo/etherlab-users
