exchange2003 features in a Windows2000AD
Hi all, What do you think are the features I am going to lose if I deploy Exchange2003 in a Windows2000 AD(native) domain instead of a Windows2003 AD domain? So far, based on the following article I could lost the InetOrgPerson objects : http://support.microsoft.com/default.aspx?scid=kb;en-us;822591&Product=exch2003 thx -Eric _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Web Interface: http://intm-dl.sparklist.com/cgi-bin/lyris.pl?enter=exchange&text_mode=&lang=english To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED]
RE: adprep /forestprep versus exchange2000
Hi all, W2kAD (w2k+sp4) Exchange2000+Sp3 We plan to upgrade both our W2KAD(native) and W2KDcs to W2K3AD and W2K3 respectively. We already have exchange2000+Sp3 already installed in our domain. Could you please tell me if this article is needed, I am not sure if this article ("mangled" ldapdisplay) can be ignored because of our exchange2000+SP3. http://support.microsoft.com/default.aspx?scid=kb;en-us;314649&Product=exch2k if the article is needed do you think that the changes can be done using "adsi editor" instead of the ldf? Thx -Eric _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Web Interface: http://intm-dl.sparklist.com/cgi-bin/lyris.pl?enter=exchange&text_mode=&lang=english To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED]
exchange2003 and msx55 diff exchnage orgs same windowsdomain
Hi all We have a NT4 domain which happens to have an exchange55 server in (exchange organization =ORGX) running on a windows2000 member server. I plan to upgrade our NT4 domain to be a windows2003AD, and run forestprep to create a new exchange organization (ORGY) to later install exchange2003, I do not plan any co-existence with the existent55, but still want to allow the MSX55 to work. Please Do you think that is possible? thx _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Web Interface: http://intm-dl.sparklist.com/cgi-bin/lyris.pl?enter=exchange&text_mode=&lang=english To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED]
OUT OF TOPIC **security policie's mmc empty.
Hi all, The following is happeing on our DCs. (W2KAD-mixed mode) I have noticed that "domain controller security policy", "domains security policy" and "local security policy" does not show any policies instead they show an empty folder called "windows settings". I have also noticed that after right-click on my computer and selecting manage the "system tools" and "storage" icons do not expand. I have applied adminpack.msi and SP4 still the same problem. Please do you know what can I do to recover this mmc functionality? thx PS: both dcs were upgraded from nt4 pdc and nt4bdc respectively. The only program installed after the upgrade is "dell openmanage". _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Web Interface: http://intm-dl.sparklist.com/cgi-bin/lyris.pl?enter=exchange&text_mode=&lang=english To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED]
RE: OWA versus NTFS permissions
yes logon locally in place in the w2k member server were owa resides. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of [EMAIL PROTECTED] Posted At: Friday, October 24, 2003 3:26 PM Posted To: Microsoft Exchange List Server Conversation: OWA versus NTFS permissions Subject: RE: OWA versus NTFS permissions Permission granted for users to log on locally? See the archives for extensive discussion... David -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Microsoft Exchange List Server Sent: Friday, October 24, 2003 3:16 PM To: Exchange Discussions Subject: OWA versus NTFS permissions Hi all W2K-AD nativemode (1 forest, 1 tree, 1 domain) MSX2000+SP3 (mixedmode) running in a W2K+SP4 member server. The only account able to use OWa is the exchangeadmin account, all other users got "Error: Access is Denied" after 3 tries. I have followed the Microst Article Q317471 and still does not work. Any suggestions? thx _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Web Interface: http://intm-dl.sparklist.com/cgi-bin/lyris.pl?enter=exchange&text_mode=&; lang=english To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Web Interface: http://intm-dl.sparklist.com/cgi-bin/lyris.pl?enter=exchange&text_mode=&lang=english To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Web Interface: http://intm-dl.sparklist.com/cgi-bin/lyris.pl?enter=exchange&text_mode=&lang=english To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED]
OWA versus NTFS permissions
Hi all W2K-AD nativemode (1 forest, 1 tree, 1 domain) MSX2000+SP3 (mixedmode) running in a W2K+SP4 member server. The only account able to use OWa is the exchangeadmin account, all other users got "Error: Access is Denied" after 3 tries. I have followed the Microst Article Q317471 and still does not work. Any suggestions? thx _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Web Interface: http://intm-dl.sparklist.com/cgi-bin/lyris.pl?enter=exchange&text_mode=&lang=english To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED]
Exchange2003 features versus OS matrix.
Hi all, Please do you know of any matrix of all the features available/not available for Exchange2003 versus the OS where this exchange resides, including the AD domain mode where the exchange2003 resides? For instance, what feature is not going to be available when Exchange2003 is on a W2K member server in a W2K AD in mixed mode. I have read that rpc over http is only available if exchange2003 runs on a windows2003 server which is in a Windows2003AD. thx _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Web Interface: http://intm-dl.sparklist.com/cgi-bin/lyris.pl?enter=exchange&text_mode=&lang=english To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED]
RPC over HTTP support for Outlook 2003, conditionals?
Hi all, Can outlook2003 be benefit of the feature of the subject if the exchange2003 (enterprise /standard) is running on a windows2003 server standard in a W2K-AD in either rmixed or native mode? Please do you have any microsoft article --dfiferent than 822178-- which describes what is or is not to be loose when using exchange2003 in a windows2000 or windows2003 server in a W2K-AD or W2K3-AD, mixed or native. Thanks in advance _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Web Interface: http://intm-dl.sparklist.com/cgi-bin/lyris.pl?enter=exchange&text_mode=&lang=english To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED]
forestprep using standard or enterprise version?
Hi all, 1 forest, 1tree, multiple childdomains W2KAD I am planning to run exchange2003 /forestprep at the forestroot of our AD, the root will have 1 exchange2003 server (just 50 users, 1 storage group) but the childomains will have their own exchange2003 servers (some of them 10 databases). Do you see any problem if at the forestroot I run /forestprep with an exchange2003 standard version?, the childomains will get their own exchange2003 enterprise version. thx _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Web Interface: http://intm-dl.sparklist.com/cgi-bin/lyris.pl?enter=exchange&text_mode=&lang=english To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED]
optoins to populate the GAL
Hi all, W2KAD+sp4 - 1 forest-1tree MSX2000+sp3 Using outlook client we can see the list of members of our *users* OU and send messages to them. How can we see a list of other users in another forests? any other way to populate our gal maybe based on public folder? or another views? thx _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Web Interface: http://intm-dl.sparklist.com/cgi-bin/lyris.pl?enter=exchange&text_mode=&lang=english To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED]
ADMT to migrate MSX55 box to AD
Hi all Is it possible to move an operational MSX55 from NT4 domain to a W2K-AD domain (different NETBIOS domain name than NT4) using ADMT? * assuming cases where: MSX55 currently lives in a NT4 member or NT4BDC or W2k member of the source NT4 domain and also target on AD native and target on AD mixed mode. If yes, Are the primary NT accounts of the MSX55's mailboxes will be changed automatically by ADMT to reflect the new domain? or do we need to change the primary-nt account manually for each mailbox (to reflect the new domain) any other changes needed after done the migration ? *this is an operaytional MSX55 with 1000 mailboxes in. thx _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Web Interface: http://intm-dl.sparklist.com/cgi-bin/lyris.pl?enter=exchange&text_mode=&lang=english To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED]
RE: msx55 migration to AD
Thanks for the information , I did consider that in the beginning then I switch my mind to the ADMTv2 as itis supposse to move servernames, it looks easier than creating a new box. Do you have any bad experience moving msx55 using ADMTv2 ? Also on step number1 I think a trsurelation is needed to join the site from a different domain? thx -Original Message- From: Ed Crowley [mailto:[EMAIL PROTECTED] Sent: Thursday, June 19, 2003 1:38 PM To: Exchange Discussions Subject: RE: msx55 migration to AD I recommend that you don't move the server and instead use http://www.swinc.com/resource/exch_faq_appxa.htm to move everything to a new server in the new domain. Ed Crowley MCSE+Internet MVP Freelance E-Mail Philosopher Protecting the world from PSTs and Bricked Backups!T -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Microsoft Exchange List Server Sent: Thursday, June 19, 2003 1:27 PM To: Exchange Discussions Subject: RE: msx55 migration to AD thanks, but my question was referred on how to migrate the actual MSX55 server and keep it as the msx55 server in the AD domain. that msx55 is a production box with 1000 mailboxes in. thx -Original Message- From: Andy David [mailto:[EMAIL PROTECTED] Sent: Thursday, June 19, 2003 12:07 PM To: Exchange Discussions Subject: Re: msx55 migration to AD Doesnt the documentation spell all that out? I think you can automatically move the Exch service accounts except the System Attendant. - Original Message - From: "Microsoft Exchange List Server" <[EMAIL PROTECTED]> To: "Exchange Discussions" <[EMAIL PROTECTED]> Sent: Thursday, June 19, 2003 2:59 PM Subject: msx55 migration to AD > Hi all, > > We are going to migrate our NT4 domain to w2kad. > > the new domain will have a different NETBIOS domain name. > > We understand that we need to migrate user/password using ADMTv2. > > Could you please give us some considerations when migrating our > exchange servers (how to migrate the servername?)? we have msx55 > running on w2k and running on NT4 members and on NT4 BDCS. > > thx, > > _ > List posting FAQ: http://www.swinc.com/resource/exch_faq.htm > Web Interface: http://intm-dl.sparklist.com/cgi-bin/lyris.pl?enter=exchange&text_mode=&lang =english > To unsubscribe: mailto:[EMAIL PROTECTED] > Exchange List admin:[EMAIL PROTECTED] > _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Web Interface: http://intm-dl.sparklist.com/cgi-bin/lyris.pl?enter=exchange&text_mode=&lang =english To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Web Interface: http://intm-dl.sparklist.com/cgi-bin/lyris.pl?enter=exchange&text_mode=&lang =english To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Web Interface: http://intm-dl.sparklist.com/cgi-bin/lyris.pl?enter=exchange&text_mode=&lang =english To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Web Interface: http://intm-dl.sparklist.com/cgi-bin/lyris.pl?enter=exchange&text_mode=&lang=english To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED]
RE: msx55 migration to AD
thanks, but my question was referred on how to migrate the actual MSX55 server and keep it as the msx55 server in the AD domain. that msx55 is a production box with 1000 mailboxes in. thx -Original Message- From: Andy David [mailto:[EMAIL PROTECTED] Sent: Thursday, June 19, 2003 12:07 PM To: Exchange Discussions Subject: Re: msx55 migration to AD Doesnt the documentation spell all that out? I think you can automatically move the Exch service accounts except the System Attendant. - Original Message - From: "Microsoft Exchange List Server" <[EMAIL PROTECTED]> To: "Exchange Discussions" <[EMAIL PROTECTED]> Sent: Thursday, June 19, 2003 2:59 PM Subject: msx55 migration to AD > Hi all, > > We are going to migrate our NT4 domain to w2kad. > > the new domain will have a different NETBIOS domain name. > > We understand that we need to migrate user/password using ADMTv2. > > Could you please give us some considerations when migrating our exchange > servers (how to migrate the servername?)? we have msx55 running on w2k and > running on NT4 members and on NT4 BDCS. > > thx, > > _ > List posting FAQ: http://www.swinc.com/resource/exch_faq.htm > Web Interface: http://intm-dl.sparklist.com/cgi-bin/lyris.pl?enter=exchange&text_mode=&lang =english > To unsubscribe: mailto:[EMAIL PROTECTED] > Exchange List admin:[EMAIL PROTECTED] > _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Web Interface: http://intm-dl.sparklist.com/cgi-bin/lyris.pl?enter=exchange&text_mode=&lang =english To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Web Interface: http://intm-dl.sparklist.com/cgi-bin/lyris.pl?enter=exchange&text_mode=&lang=english To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED]
msx55 migration to AD
Hi all, We are going to migrate our NT4 domain to w2kad. the new domain will have a different NETBIOS domain name. We understand that we need to migrate user/password using ADMTv2. Could you please give us some considerations when migrating our exchange servers (how to migrate the servername?)? we have msx55 running on w2k and running on NT4 members and on NT4 BDCS. thx, _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Web Interface: http://intm-dl.sparklist.com/cgi-bin/lyris.pl?enter=exchange&text_mode=&lang=english To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED]
OWA 55 "owa was unable to get to your inbox"
Hi all MSX55+SP4 1org,1site users report that they get "owa was unable to get to your inbox" when they try to access their mail via OWA. Curious thing is that same OWA worked before and without any intervention that same owa works afterand then someother day stop to work..and so on. It Is failing in a random way I have applied Microsoft solution on K248081 still same probelm any ideas thx, -Original Message- From: Fyodorov, Andrey [mailto:[EMAIL PROTECTED] Sent: Monday, June 16, 2003 9:49 AM To: Exchange Discussions Subject: RE: Multiple domains. on the General page, there is a button called [Filter rules] you could just ignore that button. -Original Message- From: Neil Doody [mailto:[EMAIL PROTECTED] Sent: Monday, June 16, 2003 11:50 AM To: Exchange Discussions Subject: RE: Multiple domains. Im at a loss again here. I create the new recipient Policy, I call it something. I then proceed to enter the address space, which is @kwikform.co.uk in the Email Addresses tab. That tells exchange to accept @kwikform.co.uk emails. I don't see any other tab apart from filter users, is that what you mean? Im using exchange 2000. -Original Message- From: Fyodorov, Andrey [mailto:[EMAIL PROTECTED] Sent: 16 June 2003 16:45 To: Exchange Discussions Subject: RE: Multiple domains. leave it blank. Or create a query that won't find anyone. -Original Message- From: Neil Doody [mailto:[EMAIL PROTECTED] Sent: Monday, June 16, 2003 11:36 AM To: Exchange Discussions Subject: RE: Multiple domains. Please point me in the right direction if you could, after I have made the Policy, what says who it applies to? -Original Message- From: Tom Meunier [mailto:[EMAIL PROTECTED] Sent: 16 June 2003 15:58 To: Exchange Discussions Subject: RE: Multiple domains. The recipient policy doesn't have to apply to anybody (much less everybody) - they just need to BE there. Make a recipient policy that applies to nobody that has all those domains. Get rid of the connector. Problem solved. They'll bounce properly at that point. -Original Message- From: Neil Doody [mailto:[EMAIL PROTECTED] Posted At: Monday, June 16, 2003 5:11 AM Posted To: MSExchange Mailing List Conversation: Multiple domains. Subject: Multiple domains. Okay, weve got more than one local domain on the exchange server, only one domain is actually used for the servers, i.e. the active directory, the other domains are just legacy internet domains with the MX record set as our exchange server. To allow delivery of emails to people in the exchange organisation you can either use recipient policies with the desired domain, or alternatively add a new connector, add the address space and tick "allow relaying to these domains". We have gone for the latter option as we do not want legacy email addresses created automatically within the domain, we only want people who we manually create email addresses to receive email from the legacy domain. However, the problem is we are now getting a large mail queue for the legacy domains as the server is attempting to relay the messages to the end user but the email address does not exist within our organisation. That is people are trying to send emails, i.e. spammers to email addresses that previously existed and the server is continually trying to relay that email back to itself and were getting all sorts of delay notifications etc. What I was wondering is how I can tell the server to realise that the email address doesn't exist and bounce it away ? Or perhaps im going about this whole thing the wrong way, maybe someone can enlighten me :) _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Web Interface: http://intm-dl.sparklist.com/cgi-bin/lyris.pl?enter=exchange&text_mode=&; lang=english To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Web Interface: http://intm-dl.sparklist.com/cgi-bin/lyris.pl?enter=exchange&text_mode=&; lang =english To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Web Interface: http://intm-dl.sparklist.com/cgi-bin/lyris.pl?enter=exchange&text_mode=&; lang=english To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Web Interface: http://intm-dl.sparklist.com/cgi-bin/lyris.pl?enter=exchange&text_mode=&lang =english To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] __
RE: rehome 10,000 PFs.
thanks for the information -Original Message- From: Couch, Nate [mailto:[EMAIL PROTECTED] Sent: Wednesday, May 28, 2003 10:44 AM To: Exchange Discussions Subject: RE: rehome 10,000 PFs. Also be aware of the load you be placing on your servers. If the servers are in the same site then it will be better, though not much, with all the replication messages going from the source to the target server. This operation you are planning will generate a ton of them so you might want to do this on a weekend. If you are going from one site to another I hope you have the bandwidth for this - you will need it - this all depends on the total amoutn of data being moved too, of course. We have one customer who has only about 1100 PF's and when they replicate it really drags the mail flow to a crawl even with T1's in place. Regards. Nate Couch EDS Messaging > -- > From: Roger Seielstad > Reply To: Exchange Discussions > Sent: Wednesday, May 28, 2003 12:36 > To: Exchange Discussions > Subject: RE: rehome 10,000 PFs. > > Custom recipients and distribution lists are not homed to a server, rather > they are homed to an Exchange site (or fully contained in AD if its E2k, > which I'm guessing it isn't). > > Public Folders allow for propagation of changes down a tree. Select the > top > level folder via Exchange Admin and change the home server property (as > well > as any replicas that need to be added or removed) and then select the > check > box on the first screen that says (something to the effect of) "Propagate > Changes to Subfolders". When you hit OK, you'll get prompted for which > properties should be propagated - make sure Home Server (and replicas, if > you changed those) are checked and hit OK. > > Roger > -- > Roger D. Seielstad - MTS MCSE MS-MVP > Sr. Systems Administrator > Inovis Inc. > > > > -Original Message- > > From: Microsoft Exchange List Server > > [mailto:[EMAIL PROTECTED] > > Sent: Wednesday, May 28, 2003 1:07 PM > > To: Exchange Discussions > > Subject: rehome 10,000 PFs. > > > > > > Hi all, > > MSX55+sp4 > > > > Is there anyway to rehome at once all the public folders, > > distribution lists and custom recipients? > > > > thanks > > > > > > _ > > List posting FAQ: http://www.swinc.com/resource/exch_faq.htm > > Web Interface: > > http://intm-dl.sparklist.com/cgi-bin/lyris.pl?enter=exchange&t > ext_mode=&lang=english > To unsubscribe: mailto:[EMAIL PROTECTED] > Exchange List admin:[EMAIL PROTECTED] > > _ > List posting FAQ: http://www.swinc.com/resource/exch_faq.htm > Web Interface: > http://intm-dl.sparklist.com/cgi-bin/lyris.pl?enter=exchange&text_mode=&la > ng=english > To unsubscribe: mailto:[EMAIL PROTECTED] > Exchange List admin:[EMAIL PROTECTED] > > _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Web Interface: http://intm-dl.sparklist.com/cgi-bin/lyris.pl?enter=exchange&text_mode=&lang =english To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Web Interface: http://intm-dl.sparklist.com/cgi-bin/lyris.pl?enter=exchange&text_mode=&lang=english To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED]
rehome 10,000 PFs.
Hi all, MSX55+sp4 Is there anyway to rehome at once all the public folders, distribution lists and custom recipients? thanks _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Web Interface: http://intm-dl.sparklist.com/cgi-bin/lyris.pl?enter=exchange&text_mode=&lang=english To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED]
MSX2000 restore
Hi all, MSX2000+SP3 I am using the following article http://support.microsoft.com/default.aspx?scid=kb;en-us;297289 I have got this error when starting the RESTORE The Specified computer is not a microsoft exchange server or its microsoft exchange services are not started Yes the services are started any ideas , could the problem be that we have the tape device on another server different than MSX2000? thanks, _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED]
MSX2000 restore
Hi all, MSX2000+SP3 I am using the following article http://support.microsoft.com/default.aspx?scid=kb;en-us;297289 I have got this error when starting the RESTORE The Specified computer is not a microsft exchange server or its microsoft exchange services are not started yes the services are started any ideas thanks, _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED]
exchange2000 restore
Hi all, MSX2000+SP3 I am using the following article http://support.microsoft.com/default.aspx?scid=kb;en-us;297289 I have got this error when starting the RESTORE (using NTBACKUP from a server different than the exchange server), for the restore I have selected logfiles+mailbox store+public folder store. Unable to create the log path. Check to make sure that it is a valid path. for sure I am using a valid path, I have tried both a *valid* path on the computer where the tape device is and a *valid* path on the exchange server none of these work. any ideas? thanks, _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED]
Move MSX2000 server and keep the same name
Hi all Does anyone know if this method work? to move an exchange2000 to a new hardware and keep the same name http://support.microsoft.com/default.aspx?scid=kb;en-us;297289 any comments? thanks, _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED]
move server keep same name
Hi all Does anyone try this method? to move an exchange2000 to a new hardware and keep the same name http://support.microsoft.com/default.aspx?scid=kb;en-us;297289 any comments? thanks, _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED]
RE: Out of topic -movetree
lazy guys. ? the reson they gave us is *we do not want to modify anything or create anything just move the users* do you know if ADMT.exe will do the job and preserve the passwords? =er -Original Message- From: Ed Crowley [mailto:[EMAIL PROTECTED] Sent: Friday, February 21, 2003 9:38 AM To: Exchange Discussions Subject: RE: Out of topic -movetree And the client doesn't want to go that way exactly why? Ed Crowley MCSE+Internet MVP Freelance E-Mail Philosopher Protecting the world from PSTs and Bricked Backups!T -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Microsoft Exchange List Server Sent: Friday, February 21, 2003 9:26 AM To: Exchange Discussions Subject: RE: Out of topic -movetree Hi Ed, yes we tested that possibility and it did work, the situation here is that the client who is going to do that does not want to go that way. so we are exploring the way of avoiding the intermmediate step, do you think is this a movetree.exe limitation, so far *Users* does not seem to be an OU, is movetree.exe moving OUs only? thanks, -er -Original Message- From: Ed Crowley [mailto:[EMAIL PROTECTED] Sent: Friday, February 21, 2003 8:54 AM To: Exchange Discussions Subject: RE: Out of topic -movetree Why don't you move the users you want to move into another OU and move that? Ed Crowley MCSE+Internet MVP Freelance E-Mail Philosopher Protecting the world from PSTs and Bricked Backups!T -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Microsoft Exchange List Server Sent: Friday, February 21, 2003 8:52 AM To: Exchange Discussions Subject: Out of topic -movetree > Hi All > > yes I have read Q238394, I am trying to move 500 users from one domain > to another , I am getting an error that indicates that the source can > not be verified > > /sdn CN=user1,OU=Users,DC=domain,DC=COM > > Do you know how to use movetree to move *some* users out of the > default *Users* > container from one domain to the *Users* container in another domain , > in the > same forest. > > Thanks, > ER > _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED]
RE: Out of topic -movetree
Hi Ed, yes we tested that possibility and it did work, the situation here is that the client who is going to do that does not want to go that way. so we are exploring the way of avoiding the intermmediate step, do you think is this a movetree.exe limitation, so far *Users* does not seem to be an OU, is movetree.exe moving OUs only? thanks, -er -Original Message- From: Ed Crowley [mailto:[EMAIL PROTECTED]] Sent: Friday, February 21, 2003 8:54 AM To: Exchange Discussions Subject: RE: Out of topic -movetree Why don't you move the users you want to move into another OU and move that? Ed Crowley MCSE+Internet MVP Freelance E-Mail Philosopher Protecting the world from PSTs and Bricked Backups!T -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of Microsoft Exchange List Server Sent: Friday, February 21, 2003 8:52 AM To: Exchange Discussions Subject: Out of topic -movetree > Hi All > > yes I have read Q238394, I am trying to move 500 users from one domain > to another , I am getting an error that indicates that the source can > not be verified > > /sdn CN=user1,OU=Users,DC=domain,DC=COM > > Do you know how to use movetree to move *some* users out of the > default *Users* > container from one domain to the *Users* container in another domain , > in the > same forest. > > Thanks, > ER > _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED]
Out of topic -movetree
> Hi All > > yes I have read Q238394, I am trying to move 500 users from one domain to > another , I am getting an error that indicates that the source can not be > verified > > /sdn CN=user1,OU=Users,DC=domain,DC=COM > > Do you know how to use movetree to move *some* users out of the default *Users* > container from one domain to the *Users* container in another domain , in the > same forest. > > Thanks, > ER > _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED]
RE: Exchange2000 to a new server
Hi, Those steps seems to be ok if the servername will be different, in this case the server name must stay the same because this client routes their emails trhough another company and that *other* company uses the long email address to route the messages, and because the clients *wants* to keep it the same to avoid modifying the LMHOST files on remote dialers. Do you know of a set of instructions to do the move server to a new one and keep the same name? thanks, -ER -Original Message- From: Ed Crowley [mailto:[EMAIL PROTECTED]] Sent: Tuesday, February 18, 2003 10:02 AM To: Exchange Discussions Subject: RE: Exchange2000 to a new server Always the easiest way to do this is http://www.swinc.com/resource/exch_faq_appxa.htm. Why do you feel you must retain the old server name? That is seldom if ever really necessary. Ed Crowley MCSE+Internet MVP Freelance E-Mail Philosopher Protecting the world from PSTs and Bricked Backups!T -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of Microsoft Exchange List Server Sent: Tuesday, February 18, 2003 9:15 AM To: Exchange Discussions Subject: Exchange2000 to a new server MSX2000+SP3 1forest,1Org We have bought a new server to move and preserve the name of our current exchange2000 server. Will be enough to obtain an exchange bakcup of the original server, then remove it from the domain, re-add to the domain and perform an exchange2000 restore over it..to make it operational in the new box? any other considerations? thanks, =er _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED]
Exchange2000 to a new server
MSX2000+SP3 1forest,1Org We have bought a new server to move and preserve the name of our current exchange2000 server. Will be enough to obtain an exchange bakcup of the original server, then remove it from the domain, re-add to the domain and perform an exchange2000 restore over it..to make it operational in the new box? any other considerations? thanks, =er _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED]
Deleting or moving system mailboxes
MSX2000+SP3 1ORG Inside the first storage group we have created a second mailbox store and moved all the mailboxes inside this one, so far there are three mailboxes pending to be moved but these ones do not have an associate NTaccount how can we move these accounts before deleting the first mailbox store? SystemMailbox{A9F54B99-6088-4CAA-8590-7C6614B818A1} System Attendant SMTP (SERVERNAME-{A9F54B99-6088-4CAA-8590-7C6614B818A1}) *we know we can move System Attendant using Q262892 *in the second mailbox store SystemMailbox and SMTP mailboxes do exist but with differente hexadecimal numbers. thanks, -er _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED]
RE: Single instance storage anyway to revert?
Hi, Thanks for the info, yes I use move mailbox process from active directory users& computers. Yes the final database in size is samller that the original, but some individual mailboxes are triple in size. -er -Original Message- From: McBee, Jim [mailto:[EMAIL PROTECTED]] Sent: Saturday, February 15, 2003 12:21 AM To: Exchange Discussions Subject: RE: Single instance storage anyway to revert? Hu I am resaonbly sure that this should NOT have happened. UNLESS you used ExMerge to move the mail out to a PST and then imported it back in. How did you move the mailboxes? If you use the "Move" option in Exchange Tasks to move a mailbox, Single Instance Store is preserved. And even if it was not, then the size of the store would grow, not the actual mailbox. There is a 3rd party (C2C's MaxCompression) that will go through the store and compress attachments provided the attachment is only associated with one message. Jim McBee -Original Message----- From: Microsoft Exchange List Server [mailto:[EMAIL PROTECTED]] Posted At: Friday, February 14, 2003 8:18 PM Posted To: Exchange Technical Mailing List Conversation: Single instance storage anyway to revert? Subject: Single instance storage anyway to revert? MSX2000+SP3 1forest After moving from one mailbox store to a second (same server) all the mailboxes arrved to the new store with sizes at least twiece bigger as in the original, anyway to reduce or compress or set back to original size the mailbox sizes in the new store? Thanks, -er _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED]
Single instance storage anyway to revert?
MSX2000+SP3 1forest After moving from one mailbox store to a second (same server) all the mailboxes arrved to the new store with sizes at least twiece bigger as in the original, anyway to reduce or compress or set back to original size the mailbox sizes in the new store? Thanks, -er _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED]
RE: servername limited same as in 55?
Aha! no this is not a DC, hence if i run DCPROMO on that box I will avoid that problem? Please do you have a Q-article as a reference Rgds, ER -Original Message- From: Charles Marriott [mailto:[EMAIL PROTECTED]] Sent: Friday, February 07, 2003 2:21 PM To: Exchange Discussions Subject: RE: servername limited same as in 55? Yes, unless it's a DC. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Microsoft Exchange List Server Sent: Friday, February 07, 2003 3:10 PM To: Exchange Discussions Subject: servername limited same as in 55? MSX2000+sp3 1 Org Hi All We have two exchange servers in our organization A & B, we are going to rehome everything from server A to B (mailboxes, public folder, systems folders, dls) once rehomed can we just rename the servername fom B to A and expect exchange2000 to work? we remember that In 5.5 the servername should not be rename it. rgds, -er _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED]
servername limited same as in 55?
MSX2000+sp3 1 Org Hi All We have two exchange servers in our organization A & B, we are going to rehome everything from server A to B (mailboxes, public folder, systems folders, dls) once rehomed can we just rename the servername fom B to A and expect exchange2000 to work? we remember that In 5.5 the servername should not be rename it. rgds, -er _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED]
replace MSX2000 with new HW.
MSX2000+SP3, Native mode 1 ORG Native W2K-AD We currently operate with 1 MSX2000 we are buying two new servers and we want to discard the current one (called serverA), the MSX2000 servers are member servers (no DNS, no GC) Server A is the first and unique MSX2000 in the Org. have you ever done something similar to this? for sure tape backups will be prepared. 1) Wait for the two new servers (B & C), load Windows2000+ all necessary patches 2) ADD server *B* to AD, install Exchange2000, prepare server *C* offline and name it *A* 2) Move the maiboxes from *A* to server *B* 3) Disconnect *A* from the domain (remove that computername from the AD, disconnect lan cable) 4) ADD *A* to the Active Directory, install exchange2000 5) Move the mailboxes back from server *B* to new *A* -special interest in point 5 is B going to recognize the new A and viceversa? note: we are doing the move mailbox because there is a corruption (checksum error) on the currentdatabase, this checksum error is not causing any problem to the users but the backup does not finish. we are buying two new servers because we are going to install -later- the Legato co-standby solution. Rgds, -er _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED]
RE: how to prevent logon during move mailbox
yes from MSX2000 to MSX2000 thansk, -er -Original Message- From: Ed Crowley [mailto:[EMAIL PROTECTED]] Sent: Thursday, February 06, 2003 3:52 PM To: Exchange Discussions Subject: RE: how to prevent logon during move mailbox >From Exchange 2000 to Exchange 2000? Ed Crowley MCSE+Internet MVP kcCC+I Tech Consultant hp Services Protecting the world from PSTs and Bricked Backups! -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of Microsoft Exchange List Server Sent: Thursday, February 06, 2003 3:48 PM To: Exchange Discussions Subject: how to prevent logon during move mailbox MSX2000+SP3 1 forest Do we have any Qarticle explaining how to prevent logon during an exchage 2000 move mailbox process? I have tried the article below it does work for msx2000 http://support.microsoft.com/default.aspx?scid=kb;EN-US;218920 thanks, -er _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED]
how to prevent logon during move mailbox
MSX2000+SP3 1 forest Do we have any Qarticle explaining how to prevent logon during an exchage 2000 move mailbox process? I have tried the article below it does work for msx2000 http://support.microsoft.com/default.aspx?scid=kb;EN-US;218920 thanks, -er _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED]
Automatic template response
MSx55+SP4 Do you know what do I need to configure to allow an automatic reply (with a template) for each message received by one of our mailboxes. We tried outofoffice rules and rules but we got a subject like out of office with the first one and the rules only work if the client is open. Rgds, -er _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED]
RE: user object deleted mailbox still there
Problem solved thanks to the brilliant 100% technical idea of Chris on involving the janitor -er -Original Message- From: Chris Scharff [mailto:[EMAIL PROTECTED]] Sent: Friday, January 24, 2003 1:25 PM To: Exchange Discussions Subject: Re: user object deleted mailbox still there Perhaps if you print out the article and pay the janitor to read it to you slowly. On 1/24/03 11:21, "Microsoft Exchange List Server" <[EMAIL PROTECTED]> wrote: HI this is what the article says and what we have done, This also means that if you mistakenly delete a mail-enabled user account, you can recreate that user object, and then reconnect that mailbox during the mailbox retention period. results: after recreating the userobject the reconnect mailbox is not available is gray-out -Original Message- From: Chris Scharff [mailto:[EMAIL PROTECTED]] Sent: Thursday, January 23, 2003 10:52 PM To: Exchange Discussions Subject: Re: user object deleted mailbox still there What have you still not done so far? Apparently it's type in the magical search term I mentioned previously and actually read the KB articles which come up. The /very first one/ addresses this issue. On 1/23/03 23:32, "Microsoft Exchange List Server" <[EMAIL PROTECTED]> wrote: The reconnect option is gray-out on themailbox..the purge option too the mailbox does not have the red cross We have recreated the ntuser still can not delete the mailbox..what we want is to delete the mailbox seems that MSX2000 does not like deleting the user first... -Original Message- From: Chris Scharff [mailto:[EMAIL PROTECTED]] Sent: Thursday, January 23, 2003 9:27 PM To: Exchange Discussions Subject: Re: user object deleted mailbox still there What have you tried so far? Apparently not typing the magical search terms "reconnect mailbox" into support.microsoft.com. On 1/23/03 23:07, "Microsoft Exchange List Server" <[EMAIL PROTECTED]> wrote: MSX2000+SP3 W2K-AD (1forest) we have deleted the user but not the mailbox, how can we deleted the mailbox? we have recreated the user but there is nothing evident to recconnect it to the existent mailbox thanks, -er _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED]
RE: user object deleted mailbox still there
HI this is what the article says and what we have done, This also means that if you mistakenly delete a mail-enabled user account, you can recreate that user object, and then reconnect that mailbox during the mailbox retention period. results: after recreating the userobject the reconnect mailbox is not available is gray-out -Original Message- From: Chris Scharff [mailto:[EMAIL PROTECTED]] Sent: Thursday, January 23, 2003 10:52 PM To: Exchange Discussions Subject: Re: user object deleted mailbox still there What have you still not done so far? Apparently it's type in the magical search term I mentioned previously and actually read the KB articles which come up. The /very first one/ addresses this issue. On 1/23/03 23:32, "Microsoft Exchange List Server" <[EMAIL PROTECTED]> wrote: The reconnect option is gray-out on themailbox..the purge option too the mailbox does not have the red cross We have recreated the ntuser still can not delete the mailbox..what we want is to delete the mailbox seems that MSX2000 does not like deleting the user first... -Original Message- From: Chris Scharff [mailto:[EMAIL PROTECTED]] Sent: Thursday, January 23, 2003 9:27 PM To: Exchange Discussions Subject: Re: user object deleted mailbox still there What have you tried so far? Apparently not typing the magical search terms "reconnect mailbox" into support.microsoft.com. On 1/23/03 23:07, "Microsoft Exchange List Server" <[EMAIL PROTECTED]> wrote: MSX2000+SP3 W2K-AD (1forest) we have deleted the user but not the mailbox, how can we deleted the mailbox? we have recreated the user but there is nothing evident to recconnect it to the existent mailbox thanks, -er _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED]
RE: user object deleted mailbox still there
The reconnect option is gray-out on themailbox..the purge option too the mailbox does not have the red cross We have recreated the ntuser still can not delete the mailbox..what we want is to delete the mailbox seems that MSX2000 does not like deleting the user first... -Original Message- From: Chris Scharff [mailto:[EMAIL PROTECTED]] Sent: Thursday, January 23, 2003 9:27 PM To: Exchange Discussions Subject: Re: user object deleted mailbox still there What have you tried so far? Apparently not typing the magical search terms "reconnect mailbox" into support.microsoft.com. On 1/23/03 23:07, "Microsoft Exchange List Server" <[EMAIL PROTECTED]> wrote: MSX2000+SP3 W2K-AD (1forest) we have deleted the user but not the mailbox, how can we deleted the mailbox? we have recreated the user but there is nothing evident to recconnect it to the existent mailbox thanks, -er _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED]
user object deleted mailbox still there
MSX2000+SP3 W2K-AD (1forest) we have deleted the user but not the mailbox, how can we deleted the mailbox? we have recreated the user but there is nothing evident to recconnect it to the existent mailbox thanks, -er _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED]
Ntbackup - msx2000
MSX2000+SP3 1 forest 1 MSX organization HI all We have been told by HP that ntbackup does not support DLT7* backup devices. Could you recommend another tape device to obtain an Exchange backup using ntbackup? Is it posiible to perform the ntbackup from a different server? Our backupexec is saying *could not verified corrupt file* and the logs are not flushed Thanks, -er _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED]
Disaster recovery in a different city
MSX55+SP4 1MSX Organization 16sites X400 connectors +1 IMC Hi All, We have 15 sites connected to a central hub via X400 connectors the central hub has IMC to send/receive messages to/from Internet. We want to propose a solution to have replace any of the sites in case of disaster in the area where the site is (consider that the server is lost). We should use just the tape backups from the site, we can build a similar server in a remote location, same name and in same domain. Our question is how can we do rehearsal of this proposal? Should we remove the existent and operational site and replace it with our restored-server (send receive some messages)? Are we going to introduce host entries at that moment? Then we need to switch back to the original server..does anybody have this reharse before? Rgds, -er _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED]
GAL / OWA MSX55
MSX55 +SP4 Hi all, Does anybody know a software to allow OWA users to see the GAL? Rgds, -er _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED]
some messages to the deleted items
MSX5.5+SP4 Outlook2002/Outlook2000 we have received two reports form differents users that *two* incoming messages do not show up in the inbox but arrived directly to the deleted items, the clients have no outlook rules to do that. wehave noticed that the messages were *high importance* ones, we can not duplicate the issue (even after sending high importance messages back) Have you seen this before? any ideas? tia -er _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED]
RE: calendar attende no information
Hi all, How can I change the free/busy to something different to 0 , what is the default? Outlook97, outlook 2000 and OutlookXP all same problem just seeing calendars for some mailboxes Thanks, -er -Original Message- From: Nikki Peterson [mailto:[EMAIL PROTECTED]] Sent: Friday, December 13, 2002 12:07 PM To: Exchange Discussions Subject: Re: calendar attende no information I have seen this occur if the owner of the calendar has not yet "initialized" their calendar by opening it. Another possibility may be that they have their free/busy set to show 0 (zero) months. There is another issue with Outlook 2002 but you did not mention the client version. Nikki -Original Message----- From: Microsoft Exchange List Server [mailto:[EMAIL PROTECTED]] > msx55+sp4 > 1 exchange organization > 1 exchange site > > some mailboxes do not show information when selected as attendees > (from an outlook client) for a calendar appointment > > simply no information (the diagonal lines instead of their real > calendar instead of busy or tentative or outofoffice) > > any suggestions on how to fix this? > > -thanks, _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED]
calendar attende no information
msx55+sp4 1 exchange organization 1 exchange site some mailboxes do not show information when selected as attendees (from an outlook client) for a calendar appointment simply no information (the diagonal lines instead of their real calendar instead of busy or tentative or outofoffice) any suggestions on how to fix this? -thanks, _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED]
co-standby high availability
Greetings, MSX2000+SP3 1Site , 1 IS Could anybody please recommend a good High availabilty solution for exchange2000, we want to have another server in our network either LAN or WAN and be able to failover if our primary exchange server fails. so far I have found Legato, VEritas and Double-take as possible solutions. Please does anybody have experience with those? TIA -er _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED]
deadlines for suportin Microsoft products
Hi All Time ago I read some information about deadlines on supporting Exchange5.5 and WindowsNT4. Does anybody know when those product are going to be discontinued for sale/support? Rgds, -er _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED]
cdo patch post-sp4
Greetings, We are planning to install the following patch, it is suppossed to be a post-SP4 for the cdo.dll and cdohtml.dll files, the problem we have is that some calendar-appointments simply disappearyes another M$ ilogical behavior. Our questionis does anybody try the installation any bad/good experiences? so far so good in our tests servers.. http://support.microsoft.com/default.aspx?scid=KB;en-us;q289606 rgds, ER _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:leave-exchange@;ls.swynk.com Exchange List admin:[EMAIL PROTECTED]
OAB version 2
MSX5.5 +SP4 1 Organization 12 sites We have noticed that onlye one site has contents in the systemfolders\exo:/ou\OAB version 2 it has two subfolders with numbers separated by hyphens. Do you knwo why this only site has those two subfolders is this ok or not? Rgds, ER _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:leave-exchange@;ls.swynk.com Exchange List admin:[EMAIL PROTECTED]
RE: How to hidde DLs ?
yes that is our guess please any tip or Q-article to deploy that? tia -er -Original Message- From: Tony Hlabse [mailto:thlabse@;hotmail.com] Sent: Monday, October 28, 2002 10:12 AM To: Exchange Discussions Subject: Re: How to hidde DLs ? You might want to build Address Lists that only certain users are allowed to see. That address list would then include your DL you want. - Original Message - From: "Microsoft Exchange List Server" <[EMAIL PROTECTED]> To: "Exchange Discussions" <[EMAIL PROTECTED]> Sent: Monday, October 28, 2002 12:24 PM Subject: How to hidde DLs ? > MSX2000+SP3 > 1 forest > multiple W2K-AD domains (A+B+C+D)+ each domain has its own MSX2000+SP3 but > due to W2K-AD they see a common GAL > > Is there anyway to allow a DL created in Domain A to behaves like this in > the GAL: > > a) not viewable from other domains (only from users in domain A) > b) viewable just for some users in domain A and some others in Domain B, C > and D > > thanks, > -er > > _ > List posting FAQ: http://www.swinc.com/resource/exch_faq.htm > Archives: http://www.swynk.com/sitesearch/search.asp > To unsubscribe: mailto:leave-exchange@;ls.swynk.com > Exchange List admin:[EMAIL PROTECTED] > _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:leave-exchange@;ls.swynk.com Exchange List admin:[EMAIL PROTECTED] _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:leave-exchange@;ls.swynk.com Exchange List admin:[EMAIL PROTECTED]
How to hidde DLs ?
MSX2000+SP3 1 forest multiple W2K-AD domains (A+B+C+D)+ each domain has its own MSX2000+SP3 but due to W2K-AD they see a common GAL Is there anyway to allow a DL created in Domain A to behaves like this in the GAL: a) not viewable from other domains (only from users in domain A) b) viewable just for some users in domain A and some others in Domain B, C and D thanks, -er _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:leave-exchange@;ls.swynk.com Exchange List admin:[EMAIL PROTECTED]
Maximum OWA concurrent users
MSX55+SP4 1 MSXorganization 1 server Does anobody know the maximum OWA concurrent users allowed in MSX55enterprise version? and MSX5.5 non-enterprise version? Thanks, -er _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:leave-exchange@;ls.swynk.com Exchange List admin:[EMAIL PROTECTED]
Word as Email editor OutlookExpress
Hi all Do we have anyway to configure OutlookExpress to use MicrosoftWord as email editor? Thanks, -er _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:leave-exchange@;ls.swynk.com Exchange List admin:[EMAIL PROTECTED]
RE: re-join a site MSX55 server
Original scenario 1MSX55 organization 1 site 2 servers (A+B) MSX55+SP4 then DL were rehomed from Server B to serverA, we forgot about the public folders. we removed server B from exchange site server B is still complete...how can we rejoin server B to the site or put back the public folders so users in server A can see the contents? currently users is server A see the Public Folder structure but are not able to see the contents...because all the data is in serverB will be sufficent to copy from server B to server A \exchsrvr\mdbdata\pub.edb ? thanks, -er _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED]
RE: load in MSX5.5
200 users , 3 server in the organization, we have noticed that just 21 concurrents users access the IS. I am wonder if 100 concurrent users will make the server to stop working? -er -Original Message- From: Ely, Don [mailto:[EMAIL PROTECTED]] Sent: Wednesday, October 09, 2002 7:34 PM To: Exchange Discussions Subject: RE: load in MSX5.5 Add about 448MB more RAM and you'll be happier at least... Beyond that, you're lacking some details... How many users are you talking about putting on said server? How much traffic will be flowing in and out of this server? Any other servers than the one in the organization? -Original Message----- From: Microsoft Exchange List Server [mailto:[EMAIL PROTECTED]] Sent: Wednesday, October 09, 2002 4:57 PM To: Exchange Discussions Subject: load in MSX5.5 MSX5.5+SP4 1CPU pentiumIII/500MHZ , 64MB RAM Greetings, Do you know when (because of load) can I say that the server will stop serving users requests? how many concurrent users? how many concurrent owa sessions? rgds, -er _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED]
load in MSX5.5
MSX5.5+SP4 1CPU pentiumIII/500MHZ , 64MB RAM Greetings, Do you know when (because of load) can I say that the server will stop serving users requests? how many concurrent users? how many concurrent owa sessions? rgds, -er _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED]
DL in GAL how not to publish?
MSX2000+SP3 1 forest multiple W2K-AD domains (A+B+C+D)+ each domain has one MSX2000+SP3 Is there anyway to let a DL created in Domain A to behaves like this in the GAL a) not viewable from other domains (only from users in domain A) b) viewable just for some users in domain A and some others in Domain B. thanks, -er _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED]
performance object counters lost
W2K-SP3 MSX2000-SP3 when we open perfmon and try to add a counter we just get a list of numbers and no description, we tried articles Q275659 and Q248993 no solution we reapplied MSX2000-sp3 and W2k-sp3 still the same. Please Any suggestoins? -er _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED]
same forest different domain 2nd exchange server
Greetings 1 forest 2 domains (just 1 DC in each W2K-AD domain) W2k+SP3+native mode 1 exchange2000 in 1st domain + SP3 + native mode We are trying to install MSx2000 in the 2nd domain, we did not run "setup /forestprep" in this second domain beacuse we already did it in the 1st domain, we got an error when trying "setup /domainprep" both DCs are able to see each other via FQDN. (netdiag + dcdiag passed ok on both DCs..except I got Trust Relation Test : skipped) setup is unable to access the windows 2000 active directory failed to contact the schema master server for this active directory forest the account I am using is a local and domain admin of the 2nd domain, in MSX2000 in the first domain this account has been delegateed "full exchange permissions" * we got the same error if we try to run "setup /forestprep" in the second domain too. Please any suggestions? -er _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED]
RE: domainprep on 2nd nt domain that belongs to a forest
Greetings, Thanks for the reply both are W2K-DC and yes both can see each other via ping FQDN, I can even see of members of both domains from one domain. The trusts are there I think created by default, I know I can login in both domains from any domain. (the credentials box let me select either thre first or 2nd domain on both DCs) How can I convert the 2nd nt domain to AD domain? What is the benefit? Was not this supposed to be done when I ran DCPROMO on the 2nd domain? Rgds, ER -Original Message- From: kanee [mailto:[EMAIL PROTECTED]] Sent: Friday, August 09, 2002 9:42 PM To: Exchange Discussions Subject: RE: domainprep on 2nd nt domain that belongs to a forest Just wondering, You said 1 forest 2 nt domains. First nt domain has an exchange server and is working fine. 2nd nt domain gives you the error you have described below when trying to install a exchange server. Have you created a 2 way trust between the win2k domain and the 2nd nt domain. Can you get to the win2k dc cia pinging it by FQDN. Does your first nt domain have a trust with win2k domain. Also just curious if you are running in native mode why not just convert 2nd nt domain to a AD domain. But make sure there are trusts setup between ll these domains that might be worth looking into and also make sure you can get to the DC using its FQDN. Let us know if this helped. -Original Message- From: Microsoft Exchange List Server [mailto:[EMAIL PROTECTED]] Sent: Thursday, August 08, 2002 7:59 PM To: Exchange Discussions Subject: domainprep on 2nd nt domain that belongs to a forest Greetings, MSX2000+SP3+native mode W2K+SP3+native mode 1 forest , two diferent NTdomains NT domain 1 has exchange server already installed and working, our intention is to install MSX2000 in the 2nd Nt domain, we ran /domainprep 9on the 2nd ntdomain), we got setup is unable to access the windows 2000 active directory failed to contact the schema master server for this active directory forest on MSX2000 Ntdomain-1 I have delegated FullExchadmin admin to the account of NTdomain-2 and also added as local admin of DC-1, still get the same error. any ideas? thanks, -er _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED]
RE: domainprep on 2nd nt domain that belongs to a forest
Greetings, Thanks for the reply both are W2K-DC and yes both can see each other via ping FQDN, I can even see of members of both domains from one domain. The trusts are there I think created by default, I know I can login in both domains from any domain. (the credentials box let me select either thre first or 2nd domain on both DCs) How can I convert the 2nd nt domain to AD domain? What is the benefit? Was not this supposed to be done when I ran DCPROMO on the 2nd domain? Rgds, ER -Original Message- From: kanee [mailto:[EMAIL PROTECTED]] Sent: Friday, August 09, 2002 9:42 PM To: Exchange Discussions Subject: RE: domainprep on 2nd nt domain that belongs to a forest Just wondering, You said 1 forest 2 nt domains. First nt domain has an exchange server and is working fine. 2nd nt domain gives you the error you have described below when trying to install a exchange server. Have you created a 2 way trust between the win2k domain and the 2nd nt domain. Can you get to the win2k dc cia pinging it by FQDN. Does your first nt domain have a trust with win2k domain. Also just curious if you are running in native mode why not just convert 2nd nt domain to a AD domain. But make sure there are trusts setup between ll these domains that might be worth looking into and also make sure you can get to the DC using its FQDN. Let us know if this helped. -Original Message- From: Microsoft Exchange List Server [mailto:[EMAIL PROTECTED]] Sent: Thursday, August 08, 2002 7:59 PM To: Exchange Discussions Subject: domainprep on 2nd nt domain that belongs to a forest Greetings, MSX2000+SP3+native mode W2K+SP3+native mode 1 forest , two diferent NTdomains NT domain 1 has exchange server already installed and working, our intention is to install MSX2000 in the 2nd Nt domain, we ran /domainprep 9on the 2nd ntdomain), we got setup is unable to access the windows 2000 active directory failed to contact the schema master server for this active directory forest on MSX2000 Ntdomain-1 I have delegated FullExchadmin admin to the account of NTdomain-2 and also added as local admin of DC-1, still get the same error. any ideas? thanks, -er _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED]
setup /domainprep does not continue
MSX2000+SP3+native mode W2K+SP3+native mode 1 forest , two diferent NTdomains when running setup /domainprep in the second Nt domain, that belongs to the forest, we got setup is unable to access the windows 2000 active directory failed to contact the schema master server for this active directory forest on MSX2000 I have delegated FullExchadmin admin to the account that is trying the domainprep any ideas? what other permissions are needed? Rgds, ER _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED]
RE: OutlookXP *preogress* bar indicator..anyway to get rid of tha t?
Greetings the "progress reporting" this is the one that is frozzen our dial-up clients...anyway to get rid of this? that happens to all users even the one that do not have any access to PFs. There was no "progress reporting" in Outlook2000 clients, users were using same laptops... thanks, -er -Original Message- From: Ed Crowley [mailto:[EMAIL PROTECTED]] Sent: Friday, August 09, 2002 10:50 AM To: Exchange Discussions Subject: RE: OutlookXP *preogress* bar indicator..anyway to get rid of that? Outlook only synchronizes public folders that are (1) in the user's Favorites, and (2) the user has asked to be synchronized. Ed Crowley MCSE+Internet MVP kcCC+I Tech Consultant hp Services Protecting the world from PSTs and Bricked Backups! -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of Microsoft Exchange List Server Sent: Friday, August 09, 2002 9:43 AM To: Exchange Discussions Subject: OutlookXP *preogress* bar indicator..anyway to get rid of that? Outlook XP Is there anyway to instruct outlookXP to not do the *synchronization* it does againtsthe exchange server we are using dial-up and full exchnage client...that blue bar indiactor is really frozzen oor work...seems that is trying to referesh every single item of the Public folders and inbox...we have a huge PFs... rgds, -er _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED]
OutlookXP *preogress* bar indicator..anyway to get rid of that?
Outlook XP Is there anyway to instruct outlookXP to not do the *synchronization* it does againtsthe exchange server we are using dial-up and full exchnage client...that blue bar indiactor is really frozzen oor work...seems that is trying to referesh every single item of the Public folders and inbox...we have a huge PFs... rgds, -er _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED]
domainprep on 2nd nt domain that belongs to a forest
Greetings, MSX2000+SP3+native mode W2K+SP3+native mode 1 forest , two diferent NTdomains NT domain 1 has exchange server already installed and working, our intention is to install MSX2000 in the 2nd Nt domain, we ran /domainprep 9on the 2nd ntdomain), we got setup is unable to access the windows 2000 active directory failed to contact the schema master server for this active directory forest on MSX2000 Ntdomain-1 I have delegated FullExchadmin admin to the account of NTdomain-2 and also added as local admin of DC-1, still get the same error. any ideas? thanks, -er _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED]
Exchange admin console trhough firewalls
Hi All MSX5.5 SP4 Please do you know what TCP/IP ports are needed to be open, to access the exchange admin console from a server that is separated by a firewall? Both servers are exchange 5.5 servers Tia, -er _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED]
How to block UCE at MSX55-IMC level
Hi All, MSX 5.5+SP4 We are looking for a product that helps out to stop UCE, this product should allow the users to send (via email) a particular UCE received to the product-database for this database to block future incoming messages with same sender/subject, also the users should receive a report of all messages blocked in a weekly basis. Hope you can share your experiences with the list. tia -er _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED]
RE: windows CE mail client
Hi all I have found the site just for your info, http://microsoft.com/mobile/downloads/mailclient.asp -Original Message- From: Microsoft Exchange List Server Sent: Monday, June 03, 2002 4:27 PM To: 'Exchange Discussions' Subject: windows CE mail client Greetings We use a version of WindowsCE that requires a software that creates Web pages with minimal graphics, no frames, and no client-side scripts to support the Pocket Internet Explorer...this is a version of simple OWA..called Windows CE mail client...does anybody know where can I get that software? Rgds, Eric Romero _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED]
windows CE mail client
Greetings We use a version of WindowsCE that requires a software that creates Web pages with minimal graphics, no frames, and no client-side scripts to support the Pocket Internet Explorer...this is a version of simple OWA..called Windows CE mail client...does anybody know where can I get that software? Rgds, Eric Romero _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED]
FW: calendar appointments not being saved
We only use NAV for Exchange 2.18 build 76, M: drive is neither backed up nor scanned for virus. -Original Message- From: Tom Meunier [mailto:[EMAIL PROTECTED]] Sent: Thursday, May 09, 2002 8:26 AM To: Exchange Discussions Subject: RE: calendar appointments not being saved Tell us about your antivirus configuration. Exact versions and builds too, please. Or if it's easier, just exclude your M: drive and all Exchange directories from your NAV-Corporate 7.x file-level scanning. (A guess) Your Outlook is broken again. It's marking things as urgent. But it always reminds me of the saying "Lack of planning on your part does not constitute an emergency on mine" which is a good koan for my more meditative moments. -tom > -Original Message- > From: Bravo, Liliana [mailto:[EMAIL PROTECTED]] > Posted At: Thursday, May 09, 2002 08:38 AM > Posted To: MSExchange Mailing List > Conversation: calendar appointments not being saved > Subject: calendar appointments not being saved > Importance: High > > > Hi all > MSX2000, native mode > User A has permissions to the calendar on mailbox B > User A creates an appointment on mailbox B by file/open/other > users folder > User A clicks save, the appointment window closes but the > appointment does not show up in B calendar > These are the events associated. any idea on how to fix this? > Event Type: Error > Event Source: EXCDO > Event Category: General > Event ID: 8206 > Date: 5/7/2002 > Time: 8:34:28 AM > User: N/A > Computer: name > Description: > Calendaring agent failed with error code 0x80040229 while > saving appointment. > Event Type: Error > Event Source: EXCDO > Event Category: General > Event ID: 8239 > Date: 5/7/2002 > Time: 8:34:28 AM > User: N/A > Computer: name > Description: > An appointment with the subject "Gaps Monthly Meeting (SF > 7142)" was saved to mailbox name. The start time is missing, > so the calendaring agent cannot publish the free/busy > information for this appointment. > > Thanks, > -er > _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED]