Re: Changed NIC - now can't control IMS via Exch. Admin program (hang s!) (V5.5)
Might not be related, but a changed NIC means a changed MAC. Was the server IP address reserved or static? - Original Message - From: Alverson, Thomas M. [EMAIL PROTECTED] To: Exchange Discussions [EMAIL PROTECTED] Sent: Monday, March 18, 2002 9:52 AM Subject: Changed NIC - now can't control IMS via Exch. Admin program (hang s!) (V5.5) I have an exchange 5.5 sp4 server that has been working fine for years. On Saturday I shut it down to replace the network card (3c905) with a new one (intel gigabyte desktop T). At the same time I also ran windows update (http://windowsupdate.microsoft.com) and applied the critical updates (that were just for IE6 I believe). After starting it up everything seemed to work fine. This morning I tried to use the Exchange ADMIN program to view the IMS queue and the admin program just hangs when I select connections/ims. It must be killed with task manager. I tried the admin program both on the server and also on a separate client machine which used to work. Both hang the admin program when IMS is selected. Every thing else in the admin program appears to work fine except the MSMAIL connector (which we no longer use) also hangs. All the other functions seem to work in the admin program. I tried stopping and restarting the IMS in services but that did not help. I may try rebooting the server tonight to see if that helps. Has anyone seen this problem before?? Tom _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED]
RE: Changed NIC - now can't control IMS via Exch. Admin program ( hang s!) (V5.5)
It was hard-coded. I wrote down the IP, netmask and gateway address and typed them into the new tcp/ip settings. -Original Message- From: Richard Leslie [mailto:[EMAIL PROTECTED]] Sent: Monday, March 18, 2002 12:21 PM To: Exchange Discussions Subject: Re: Changed NIC - now can't control IMS via Exch. Admin program (hang s!) (V5.5) Might not be related, but a changed NIC means a changed MAC. Was the server IP address reserved or static? - Original Message - From: Alverson, Thomas M. [EMAIL PROTECTED] To: Exchange Discussions [EMAIL PROTECTED] Sent: Monday, March 18, 2002 9:52 AM Subject: Changed NIC - now can't control IMS via Exch. Admin program (hang s!) (V5.5) I have an exchange 5.5 sp4 server that has been working fine for years. On Saturday I shut it down to replace the network card (3c905) with a new one (intel gigabyte desktop T). At the same time I also ran windows update (http://windowsupdate.microsoft.com) and applied the critical updates (that were just for IE6 I believe). After starting it up everything seemed to work fine. This morning I tried to use the Exchange ADMIN program to view the IMS queue and the admin program just hangs when I select connections/ims. It must be killed with task manager. I tried the admin program both on the server and also on a separate client machine which used to work. Both hang the admin program when IMS is selected. Every thing else in the admin program appears to work fine except the MSMAIL connector (which we no longer use) also hangs. All the other functions seem to work in the admin program. I tried stopping and restarting the IMS in services but that did not help. I may try rebooting the server tonight to see if that helps. Has anyone seen this problem before?? Tom _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED]
RE: Changed NIC - now can't control IMS via Exch. Admin program( hang s!) (V5.5)
So everything seems to work except opening the Admin program? -Original Message- From: Alverson, Thomas M. [mailto:[EMAIL PROTECTED]] Sent: Monday, March 18, 2002 12:25 PM To: Exchange Discussions Subject: RE: Changed NIC - now can't control IMS via Exch. Admin program ( hang s!) (V5.5) It was hard-coded. I wrote down the IP, netmask and gateway address and typed them into the new tcp/ip settings. -Original Message- From: Richard Leslie [mailto:[EMAIL PROTECTED]] Sent: Monday, March 18, 2002 12:21 PM To: Exchange Discussions Subject: Re: Changed NIC - now can't control IMS via Exch. Admin program (hang s!) (V5.5) Might not be related, but a changed NIC means a changed MAC. Was the server IP address reserved or static? - Original Message - From: Alverson, Thomas M. [EMAIL PROTECTED] To: Exchange Discussions [EMAIL PROTECTED] Sent: Monday, March 18, 2002 9:52 AM Subject: Changed NIC - now can't control IMS via Exch. Admin program (hang s!) (V5.5) I have an exchange 5.5 sp4 server that has been working fine for years. On Saturday I shut it down to replace the network card (3c905) with a new one (intel gigabyte desktop T). At the same time I also ran windows update (http://windowsupdate.microsoft.com) and applied the critical updates (that were just for IE6 I believe). After starting it up everything seemed to work fine. This morning I tried to use the Exchange ADMIN program to view the IMS queue and the admin program just hangs when I select connections/ims. It must be killed with task manager. I tried the admin program both on the server and also on a separate client machine which used to work. Both hang the admin program when IMS is selected. Every thing else in the admin program appears to work fine except the MSMAIL connector (which we no longer use) also hangs. All the other functions seem to work in the admin program. I tried stopping and restarting the IMS in services but that did not help. I may try rebooting the server tonight to see if that helps. Has anyone seen this problem before?? Tom _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] -- The information contained in this email message is privileged and confidential information intended only for the use of the individual or entity to whom it is addressed. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution or copy of this message is strictly prohibited. If you have received this email in error, please immediately notify Veronis Suhler Stevenson by telephone (212)935-4990, fax (212)381-8168, or email ([EMAIL PROTECTED]) and delete the message. Thank you. == _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED]
RE: Changed NIC - now can't control IMS via Exch. Admin program ( hang s!) (V5.5)
Opening is OK. The only things that hang the admin program that I have found so far is clicking on the IMS under connections (or also the no longer in use msmail connector) and trying to add a mailbox. I can navigate and open everything else I have tried including modifying an existing mailbox. Tom (starting to sweat...) -Original Message- From: Andy David [mailto:[EMAIL PROTECTED]] Sent: Monday, March 18, 2002 12:40 PM To: Alverson, Thomas M. Subject: RE: Changed NIC - now can't control IMS via Exch. Admin program ( hang s!) (V5.5) So everything seems to work except opening the Admin program? -Original Message- From: Alverson, Thomas M. [mailto:[EMAIL PROTECTED]] Sent: Monday, March 18, 2002 12:25 PM To: Exchange Discussions Subject: RE: Changed NIC - now can't control IMS via Exch. Admin program ( hang s!) (V5.5) It was hard-coded. I wrote down the IP, netmask and gateway address and typed them into the new tcp/ip settings. -Original Message- From: Richard Leslie [mailto:[EMAIL PROTECTED]] Sent: Monday, March 18, 2002 12:21 PM To: Exchange Discussions Subject: Re: Changed NIC - now can't control IMS via Exch. Admin program (hang s!) (V5.5) Might not be related, but a changed NIC means a changed MAC. Was the server IP address reserved or static? - Original Message - From: Alverson, Thomas M. [EMAIL PROTECTED] To: Exchange Discussions [EMAIL PROTECTED] Sent: Monday, March 18, 2002 9:52 AM Subject: Changed NIC - now can't control IMS via Exch. Admin program (hang s!) (V5.5) I have an exchange 5.5 sp4 server that has been working fine for years. On Saturday I shut it down to replace the network card (3c905) with a new one (intel gigabyte desktop T). At the same time I also ran windows update (http://windowsupdate.microsoft.com) and applied the critical updates (that were just for IE6 I believe). After starting it up everything seemed to work fine. This morning I tried to use the Exchange ADMIN program to view the IMS queue and the admin program just hangs when I select connections/ims. It must be killed with task manager. I tried the admin program both on the server and also on a separate client machine which used to work. Both hang the admin program when IMS is selected. Every thing else in the admin program appears to work fine except the MSMAIL connector (which we no longer use) also hangs. All the other functions seem to work in the admin program. I tried stopping and restarting the IMS in services but that did not help. I may try rebooting the server tonight to see if that helps. Has anyone seen this problem before?? Tom _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] -- The information contained in this email message is privileged and confidential information intended only for the use of the individual or entity to whom it is addressed. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution or copy of this message is strictly prohibited. If you have received this email in error, please immediately notify Veronis Suhler Stevenson by telephone (212)935-4990, fax (212)381-8168, or email ([EMAIL PROTECTED]) and delete the message. Thank you. == _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED]
RE: Changed NIC - now can't control IMS via Exch. Admin program ( hang s!) (V5.5)
I'm no guru to exch as often evident by some of my post's But..Never the lessMaybe reapply Exch SP4 and reboot? My guess is that it's likely the MS update . but then it could be the nic drivers and etc..software from it. 2 cents bill -Original Message- From: Alverson, Thomas M. [mailto:[EMAIL PROTECTED]] Sent: Monday, March 18, 2002 12:44 PM To: Exchange Discussions Subject: RE: Changed NIC - now can't control IMS via Exch. Admin program ( hang s!) (V5.5) Opening is OK. The only things that hang the admin program that I have found so far is clicking on the IMS under connections (or also the no longer in use msmail connector) and trying to add a mailbox. I can navigate and open everything else I have tried including modifying an existing mailbox. Tom (starting to sweat...) -Original Message- From: Andy David [mailto:[EMAIL PROTECTED]] Sent: Monday, March 18, 2002 12:40 PM To: Alverson, Thomas M. Subject: RE: Changed NIC - now can't control IMS via Exch. Admin program ( hang s!) (V5.5) So everything seems to work except opening the Admin program? -Original Message- From: Alverson, Thomas M. [mailto:[EMAIL PROTECTED]] Sent: Monday, March 18, 2002 12:25 PM To: Exchange Discussions Subject: RE: Changed NIC - now can't control IMS via Exch. Admin program ( hang s!) (V5.5) It was hard-coded. I wrote down the IP, netmask and gateway address and typed them into the new tcp/ip settings. -Original Message- From: Richard Leslie [mailto:[EMAIL PROTECTED]] Sent: Monday, March 18, 2002 12:21 PM To: Exchange Discussions Subject: Re: Changed NIC - now can't control IMS via Exch. Admin program (hang s!) (V5.5) Might not be related, but a changed NIC means a changed MAC. Was the server IP address reserved or static? - Original Message - From: Alverson, Thomas M. [EMAIL PROTECTED] To: Exchange Discussions [EMAIL PROTECTED] Sent: Monday, March 18, 2002 9:52 AM Subject: Changed NIC - now can't control IMS via Exch. Admin program (hang s!) (V5.5) I have an exchange 5.5 sp4 server that has been working fine for years. On Saturday I shut it down to replace the network card (3c905) with a new one (intel gigabyte desktop T). At the same time I also ran windows update (http://windowsupdate.microsoft.com) and applied the critical updates (that were just for IE6 I believe). After starting it up everything seemed to work fine. This morning I tried to use the Exchange ADMIN program to view the IMS queue and the admin program just hangs when I select connections/ims. It must be killed with task manager. I tried the admin program both on the server and also on a separate client machine which used to work. Both hang the admin program when IMS is selected. Every thing else in the admin program appears to work fine except the MSMAIL connector (which we no longer use) also hangs. All the other functions seem to work in the admin program. I tried stopping and restarting the IMS in services but that did not help. I may try rebooting the server tonight to see if that helps. Has anyone seen this problem before?? Tom _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] -- The information contained in this email message is privileged and confidential information intended only for the use of the individual or entity to whom it is addressed. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution or copy of this message is strictly prohibited. If you have received this email in error, please immediately notify Veronis Suhler Stevenson by telephone (212)935-4990, fax (212)381-8168, or email ([EMAIL PROTECTED]) and delete the message. Thank you. == _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List
RE: Changed NIC - now can't control IMS via Exch. Admin program( hang s!) (V5.5)
Typically, you should run the Perm Optimizer after changes (Hard drive, RAM etc, though no necessarily NICS...) It may help to run it here as well. Was the MSMAIL conn used at one time? -Original Message- From: Alverson, Thomas M. [mailto:[EMAIL PROTECTED]] Sent: Monday, March 18, 2002 12:44 PM To: Exchange Discussions Subject: RE: Changed NIC - now can't control IMS via Exch. Admin program ( hang s!) (V5.5) Opening is OK. The only things that hang the admin program that I have found so far is clicking on the IMS under connections (or also the no longer in use msmail connector) and trying to add a mailbox. I can navigate and open everything else I have tried including modifying an existing mailbox. Tom (starting to sweat...) -Original Message- From: Andy David [mailto:[EMAIL PROTECTED]] Sent: Monday, March 18, 2002 12:40 PM To: Alverson, Thomas M. Subject: RE: Changed NIC - now can't control IMS via Exch. Admin program ( hang s!) (V5.5) So everything seems to work except opening the Admin program? -Original Message- From: Alverson, Thomas M. [mailto:[EMAIL PROTECTED]] Sent: Monday, March 18, 2002 12:25 PM To: Exchange Discussions Subject: RE: Changed NIC - now can't control IMS via Exch. Admin program ( hang s!) (V5.5) It was hard-coded. I wrote down the IP, netmask and gateway address and typed them into the new tcp/ip settings. -Original Message- From: Richard Leslie [mailto:[EMAIL PROTECTED]] Sent: Monday, March 18, 2002 12:21 PM To: Exchange Discussions Subject: Re: Changed NIC - now can't control IMS via Exch. Admin program (hang s!) (V5.5) Might not be related, but a changed NIC means a changed MAC. Was the server IP address reserved or static? - Original Message - From: Alverson, Thomas M. [EMAIL PROTECTED] To: Exchange Discussions [EMAIL PROTECTED] Sent: Monday, March 18, 2002 9:52 AM Subject: Changed NIC - now can't control IMS via Exch. Admin program (hang s!) (V5.5) I have an exchange 5.5 sp4 server that has been working fine for years. On Saturday I shut it down to replace the network card (3c905) with a new one (intel gigabyte desktop T). At the same time I also ran windows update (http://windowsupdate.microsoft.com) and applied the critical updates (that were just for IE6 I believe). After starting it up everything seemed to work fine. This morning I tried to use the Exchange ADMIN program to view the IMS queue and the admin program just hangs when I select connections/ims. It must be killed with task manager. I tried the admin program both on the server and also on a separate client machine which used to work. Both hang the admin program when IMS is selected. Every thing else in the admin program appears to work fine except the MSMAIL connector (which we no longer use) also hangs. All the other functions seem to work in the admin program. I tried stopping and restarting the IMS in services but that did not help. I may try rebooting the server tonight to see if that helps. Has anyone seen this problem before?? Tom _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] -- The information contained in this email message is privileged and confidential information intended only for the use of the individual or entity to whom it is addressed. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution or copy of this message is strictly prohibited. If you have received this email in error, please immediately notify Veronis Suhler Stevenson by telephone (212)935-4990, fax (212)381-8168, or email ([EMAIL PROTECTED]) and delete the message. Thank you. == _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED
RE: Changed NIC - now can't control IMS via Exch. Admin program ( hang s!) (V5.5)
Long ago we used it but have been fully migrated for a few years. It was set to disabled in services (the msmail connector) and I don't recall having clicked on it lately. I can view and change most of the properties in an existing mailbox EXCEPT for the email address tab. If I try to add an additional address to an existing mailbox I get the same hang (admin program not responding and has hourglass) as when I try to add a new mailbox. Tom -Original Message- From: Andy David [mailto:[EMAIL PROTECTED]] Sent: Monday, March 18, 2002 1:14 PM To: Exchange Discussions Subject: RE: Changed NIC - now can't control IMS via Exch. Admin program ( hang s!) (V5.5) Typically, you should run the Perm Optimizer after changes (Hard drive, RAM etc, though no necessarily NICS...) It may help to run it here as well. Was the MSMAIL conn used at one time? -Original Message- From: Alverson, Thomas M. [mailto:[EMAIL PROTECTED]] Sent: Monday, March 18, 2002 12:44 PM To: Exchange Discussions Subject: RE: Changed NIC - now can't control IMS via Exch. Admin program ( hang s!) (V5.5) Opening is OK. The only things that hang the admin program that I have found so far is clicking on the IMS under connections (or also the no longer in use msmail connector) and trying to add a mailbox. I can navigate and open everything else I have tried including modifying an existing mailbox. Tom (starting to sweat...) -Original Message- From: Andy David [mailto:[EMAIL PROTECTED]] Sent: Monday, March 18, 2002 12:40 PM To: Alverson, Thomas M. Subject: RE: Changed NIC - now can't control IMS via Exch. Admin program ( hang s!) (V5.5) So everything seems to work except opening the Admin program? -Original Message- From: Alverson, Thomas M. [mailto:[EMAIL PROTECTED]] Sent: Monday, March 18, 2002 12:25 PM To: Exchange Discussions Subject: RE: Changed NIC - now can't control IMS via Exch. Admin program ( hang s!) (V5.5) It was hard-coded. I wrote down the IP, netmask and gateway address and typed them into the new tcp/ip settings. -Original Message- From: Richard Leslie [mailto:[EMAIL PROTECTED]] Sent: Monday, March 18, 2002 12:21 PM To: Exchange Discussions Subject: Re: Changed NIC - now can't control IMS via Exch. Admin program (hang s!) (V5.5) Might not be related, but a changed NIC means a changed MAC. Was the server IP address reserved or static? - Original Message - From: Alverson, Thomas M. [EMAIL PROTECTED] To: Exchange Discussions [EMAIL PROTECTED] Sent: Monday, March 18, 2002 9:52 AM Subject: Changed NIC - now can't control IMS via Exch. Admin program (hang s!) (V5.5) I have an exchange 5.5 sp4 server that has been working fine for years. On Saturday I shut it down to replace the network card (3c905) with a new one (intel gigabyte desktop T). At the same time I also ran windows update (http://windowsupdate.microsoft.com) and applied the critical updates (that were just for IE6 I believe). After starting it up everything seemed to work fine. This morning I tried to use the Exchange ADMIN program to view the IMS queue and the admin program just hangs when I select connections/ims. It must be killed with task manager. I tried the admin program both on the server and also on a separate client machine which used to work. Both hang the admin program when IMS is selected. Every thing else in the admin program appears to work fine except the MSMAIL connector (which we no longer use) also hangs. All the other functions seem to work in the admin program. I tried stopping and restarting the IMS in services but that did not help. I may try rebooting the server tonight to see if that helps. Has anyone seen this problem before?? Tom _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] -- The information contained in this email message is privileged and confidential information intended only for the use of the individual or entity to whom it is addressed. If the reader of this message is not the intended recipient, you are hereby notified that any
RE: Changed NIC - now can't control IMS via Exch. Admin program( hang s!) (V5.5)
Well, give Perf Optimizer a shot and see what happens. -Original Message- From: Alverson, Thomas M. [mailto:[EMAIL PROTECTED]] Sent: Monday, March 18, 2002 1:33 PM To: Exchange Discussions Subject: RE: Changed NIC - now can't control IMS via Exch. Admin program ( hang s!) (V5.5) Long ago we used it but have been fully migrated for a few years. It was set to disabled in services (the msmail connector) and I don't recall having clicked on it lately. I can view and change most of the properties in an existing mailbox EXCEPT for the email address tab. If I try to add an additional address to an existing mailbox I get the same hang (admin program not responding and has hourglass) as when I try to add a new mailbox. Tom -Original Message- From: Andy David [mailto:[EMAIL PROTECTED]] Sent: Monday, March 18, 2002 1:14 PM To: Exchange Discussions Subject: RE: Changed NIC - now can't control IMS via Exch. Admin program ( hang s!) (V5.5) Typically, you should run the Perm Optimizer after changes (Hard drive, RAM etc, though no necessarily NICS...) It may help to run it here as well. Was the MSMAIL conn used at one time? -Original Message- From: Alverson, Thomas M. [mailto:[EMAIL PROTECTED]] Sent: Monday, March 18, 2002 12:44 PM To: Exchange Discussions Subject: RE: Changed NIC - now can't control IMS via Exch. Admin program ( hang s!) (V5.5) Opening is OK. The only things that hang the admin program that I have found so far is clicking on the IMS under connections (or also the no longer in use msmail connector) and trying to add a mailbox. I can navigate and open everything else I have tried including modifying an existing mailbox. Tom (starting to sweat...) -Original Message- From: Andy David [mailto:[EMAIL PROTECTED]] Sent: Monday, March 18, 2002 12:40 PM To: Alverson, Thomas M. Subject: RE: Changed NIC - now can't control IMS via Exch. Admin program ( hang s!) (V5.5) So everything seems to work except opening the Admin program? -Original Message- From: Alverson, Thomas M. [mailto:[EMAIL PROTECTED]] Sent: Monday, March 18, 2002 12:25 PM To: Exchange Discussions Subject: RE: Changed NIC - now can't control IMS via Exch. Admin program ( hang s!) (V5.5) It was hard-coded. I wrote down the IP, netmask and gateway address and typed them into the new tcp/ip settings. -Original Message- From: Richard Leslie [mailto:[EMAIL PROTECTED]] Sent: Monday, March 18, 2002 12:21 PM To: Exchange Discussions Subject: Re: Changed NIC - now can't control IMS via Exch. Admin program (hang s!) (V5.5) Might not be related, but a changed NIC means a changed MAC. Was the server IP address reserved or static? - Original Message - From: Alverson, Thomas M. [EMAIL PROTECTED] To: Exchange Discussions [EMAIL PROTECTED] Sent: Monday, March 18, 2002 9:52 AM Subject: Changed NIC - now can't control IMS via Exch. Admin program (hang s!) (V5.5) I have an exchange 5.5 sp4 server that has been working fine for years. On Saturday I shut it down to replace the network card (3c905) with a new one (intel gigabyte desktop T). At the same time I also ran windows update (http://windowsupdate.microsoft.com) and applied the critical updates (that were just for IE6 I believe). After starting it up everything seemed to work fine. This morning I tried to use the Exchange ADMIN program to view the IMS queue and the admin program just hangs when I select connections/ims. It must be killed with task manager. I tried the admin program both on the server and also on a separate client machine which used to work. Both hang the admin program when IMS is selected. Every thing else in the admin program appears to work fine except the MSMAIL connector (which we no longer use) also hangs. All the other functions seem to work in the admin program. I tried stopping and restarting the IMS in services but that did not help. I may try rebooting the server tonight to see if that helps. Has anyone seen this problem before?? Tom _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED
RE: Changed NIC - now can't control IMS via Exch. Admin program ( hang s!) (V5.5)
That's probably what I'll try first when I can reboot the server. Other than the admin problem, it seems to be running fine. -Original Message- From: Mellott, Bill [mailto:[EMAIL PROTECTED]] Sent: Monday, March 18, 2002 1:02 PM To: Alverson, Thomas M. Subject: RE: Changed NIC - now can't control IMS via Exch. Admin program ( hang s!) (V5.5) I'm no guru to exch as often evident by some of my post's But..Never the lessMaybe reapply Exch SP4 and reboot? My guess is that it's likely the MS update . but then it could be the nic drivers and etc..software from it. 2 cents bill -Original Message- From: Alverson, Thomas M. [mailto:[EMAIL PROTECTED]] Sent: Monday, March 18, 2002 12:44 PM To: Exchange Discussions Subject: RE: Changed NIC - now can't control IMS via Exch. Admin program ( hang s!) (V5.5) Opening is OK. The only things that hang the admin program that I have found so far is clicking on the IMS under connections (or also the no longer in use msmail connector) and trying to add a mailbox. I can navigate and open everything else I have tried including modifying an existing mailbox. Tom (starting to sweat...) -Original Message- From: Andy David [mailto:[EMAIL PROTECTED]] Sent: Monday, March 18, 2002 12:40 PM To: Alverson, Thomas M. Subject: RE: Changed NIC - now can't control IMS via Exch. Admin program ( hang s!) (V5.5) So everything seems to work except opening the Admin program? -Original Message- From: Alverson, Thomas M. [mailto:[EMAIL PROTECTED]] Sent: Monday, March 18, 2002 12:25 PM To: Exchange Discussions Subject: RE: Changed NIC - now can't control IMS via Exch. Admin program ( hang s!) (V5.5) It was hard-coded. I wrote down the IP, netmask and gateway address and typed them into the new tcp/ip settings. -Original Message- From: Richard Leslie [mailto:[EMAIL PROTECTED]] Sent: Monday, March 18, 2002 12:21 PM To: Exchange Discussions Subject: Re: Changed NIC - now can't control IMS via Exch. Admin program (hang s!) (V5.5) Might not be related, but a changed NIC means a changed MAC. Was the server IP address reserved or static? - Original Message - From: Alverson, Thomas M. [EMAIL PROTECTED] To: Exchange Discussions [EMAIL PROTECTED] Sent: Monday, March 18, 2002 9:52 AM Subject: Changed NIC - now can't control IMS via Exch. Admin program (hang s!) (V5.5) I have an exchange 5.5 sp4 server that has been working fine for years. On Saturday I shut it down to replace the network card (3c905) with a new one (intel gigabyte desktop T). At the same time I also ran windows update (http://windowsupdate.microsoft.com) and applied the critical updates (that were just for IE6 I believe). After starting it up everything seemed to work fine. This morning I tried to use the Exchange ADMIN program to view the IMS queue and the admin program just hangs when I select connections/ims. It must be killed with task manager. I tried the admin program both on the server and also on a separate client machine which used to work. Both hang the admin program when IMS is selected. Every thing else in the admin program appears to work fine except the MSMAIL connector (which we no longer use) also hangs. All the other functions seem to work in the admin program. I tried stopping and restarting the IMS in services but that did not help. I may try rebooting the server tonight to see if that helps. Has anyone seen this problem before?? Tom _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] -- The information contained in this email message is privileged and confidential information intended only for the use of the individual or entity to whom it is addressed. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution or copy of this message is strictly prohibited. If you have received this email in error, please immediately notify Veronis Suhler Stevenson by telephone (212)935-4990, fax (212)381-8168, or email ([EMAIL PROTECTED]) and delete
RE: Changed NIC - now can't control IMS via Exch. Admin program ( hang s!) (V5.5)
I had not considered running Optimizer for just changing the NIC, but I'll give that a try when I have a chance to reboot the server. Other than not being able to manage the IMS queue and/or add new mailboxes, the server seems to be running just fine. Tom -Original Message- From: Andy David [mailto:[EMAIL PROTECTED]] Sent: Monday, March 18, 2002 1:14 PM To: Exchange Discussions Subject: RE: Changed NIC - now can't control IMS via Exch. Admin program ( hang s!) (V5.5) Typically, you should run the Perm Optimizer after changes (Hard drive, RAM etc, though no necessarily NICS...) It may help to run it here as well. Was the MSMAIL conn used at one time? -Original Message- From: Alverson, Thomas M. [mailto:[EMAIL PROTECTED]] Sent: Monday, March 18, 2002 12:44 PM To: Exchange Discussions Subject: RE: Changed NIC - now can't control IMS via Exch. Admin program ( hang s!) (V5.5) Opening is OK. The only things that hang the admin program that I have found so far is clicking on the IMS under connections (or also the no longer in use msmail connector) and trying to add a mailbox. I can navigate and open everything else I have tried including modifying an existing mailbox. Tom (starting to sweat...) -Original Message- From: Andy David [mailto:[EMAIL PROTECTED]] Sent: Monday, March 18, 2002 12:40 PM To: Alverson, Thomas M. Subject: RE: Changed NIC - now can't control IMS via Exch. Admin program ( hang s!) (V5.5) So everything seems to work except opening the Admin program? -Original Message- From: Alverson, Thomas M. [mailto:[EMAIL PROTECTED]] Sent: Monday, March 18, 2002 12:25 PM To: Exchange Discussions Subject: RE: Changed NIC - now can't control IMS via Exch. Admin program ( hang s!) (V5.5) It was hard-coded. I wrote down the IP, netmask and gateway address and typed them into the new tcp/ip settings. -Original Message- From: Richard Leslie [mailto:[EMAIL PROTECTED]] Sent: Monday, March 18, 2002 12:21 PM To: Exchange Discussions Subject: Re: Changed NIC - now can't control IMS via Exch. Admin program (hang s!) (V5.5) Might not be related, but a changed NIC means a changed MAC. Was the server IP address reserved or static? - Original Message - From: Alverson, Thomas M. [EMAIL PROTECTED] To: Exchange Discussions [EMAIL PROTECTED] Sent: Monday, March 18, 2002 9:52 AM Subject: Changed NIC - now can't control IMS via Exch. Admin program (hang s!) (V5.5) I have an exchange 5.5 sp4 server that has been working fine for years. On Saturday I shut it down to replace the network card (3c905) with a new one (intel gigabyte desktop T). At the same time I also ran windows update (http://windowsupdate.microsoft.com) and applied the critical updates (that were just for IE6 I believe). After starting it up everything seemed to work fine. This morning I tried to use the Exchange ADMIN program to view the IMS queue and the admin program just hangs when I select connections/ims. It must be killed with task manager. I tried the admin program both on the server and also on a separate client machine which used to work. Both hang the admin program when IMS is selected. Every thing else in the admin program appears to work fine except the MSMAIL connector (which we no longer use) also hangs. All the other functions seem to work in the admin program. I tried stopping and restarting the IMS in services but that did not help. I may try rebooting the server tonight to see if that helps. Has anyone seen this problem before?? Tom _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] _ List posting FAQ: http://www.swinc.com/resource/exch_faq.htm Archives: http://www.swynk.com/sitesearch/search.asp To unsubscribe: mailto:[EMAIL PROTECTED] Exchange List admin:[EMAIL PROTECTED] -- The information contained in this email message is privileged and confidential information intended only for the use of the individual or entity to whom it is addressed. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution or copy of this message is strictly prohibited. If you have received this email in error, please immediately notify Veronis Suhler Stevenson by telephone (212)935