[flashrom] Re: Wont flash bios
No I'm pretty sure the 1.8V is connected. Should I try to disassemble the programmer and the 1.8V converter and assemble it again? What do you mean with the 3 pin is low? How can I fix this? Fra: Angel Pons Sendt: søndag 10. mars 2019 22.50 Til: Frei Bjerkestrand Kopi: flashrom Emne: Re: [flashrom] Wont flash bios Hello, On Sun, Mar 10, 2019, 22:36 Frei Bjerkestrand mailto:frei.bjerkestr...@hotmail.no> wrote: W25Q128.W Winbond Chip If I recall correctly, this is a 1.8V part. Are you powering it with a higher voltage, by any chance? Regards, Angel Pons ___ flashrom mailing list -- flashrom@flashrom.org To unsubscribe send an email to flashrom-le...@flashrom.org
[flashrom] Re: Wont flash bios
Hello, Your reply did not reach the mailing list. Please use "Reply to all" so that your messages can reach more people than just me. On Tue, Mar 12, 2019, 09:06 Frei Bjerkestrand No I'm pretty sure the 1.8V is connected. Should I try to disassemble the > programmer and the 1.8V converter and assemble it again? > So you are using a 1.8V converter between the programmer and the chip? Regarding the original issue: If you can not change any bytes, I would suspect the flash chip is write-protected. Check its datasheet, it is likely pin 3 is somehow pulled low (write-protect pin is usually active when low). Regards, Angel Pons > ___ flashrom mailing list -- flashrom@flashrom.org To unsubscribe send an email to flashrom-le...@flashrom.org
[flashrom] Re: Wont flash bios
Hello, On Sun, Mar 10, 2019, 22:36 Frei Bjerkestrand W25Q128.W Winbond Chip > If I recall correctly, this is a 1.8V part. Are you powering it with a higher voltage, by any chance? Regards, Angel Pons > ___ flashrom mailing list -- flashrom@flashrom.org To unsubscribe send an email to flashrom-le...@flashrom.org
