The delay is included to allow you to delay for slower relays to completely close before presenting RF on the output. For most amplifiers/xvtrs, 50ms is plenty. Many work with a setting of 0ms. Your mileage may vary depending on your hardware.
Eric Wachsmann FlexRadio Systems PS. Do you have the optional 300kHz filter enabled? If not, I would uncheck that box. > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] > radio.biz] On Behalf Of Gerald Capodieci > Sent: Wednesday, September 06, 2006 11:53 PM > To: FlexRadio@flex-radio.biz > Subject: [Flexradio] Linear+SDR1000 Enable X2TR > > On the tab "General/Options" I need to enable the X2TR Please check my > following settings and let me know if they should work: > "[x] Enable X2TR" > "X2 Delay: = 200" > "[x] Enable 300khx filter" > I reset the "X2 Delay" from 500 to 200 because I couldn't stand the > delay. Will 200 work OK? > Jerry > > -------------- next part -------------- > An HTML attachment was scrubbed... > URL: /pipermail/flexradio_flex- > radio.biz/attachments/20060906/1ff6ed8f/attachment.html > _______________________________________________ > FlexRadio mailing list > FlexRadio@flex-radio.biz > http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz > Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ > FlexRadio Homepage: http://www.flex-radio.com _______________________________________________ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Homepage: http://www.flex-radio.com