Re: [Flightgear-devel] moving map of Hondajet or Da-42 // nextscenerygeneration
On Wed, 2011-11-02 at 19:31 +, Alan Teeder wrote: > Geoff > I have just tried the Hondajet and this works. > > ( If needed press Ctrl-C to highlight the hot-spot controls.) > > On the left hand screen (the PFD) I pressed the 1st button on the bottom row > below the screen. The main flight instruments (horizon etc.) appeared on > the screen. > > I repeated this with the right hand screen (the MFD) and the map came up. > The buttons are dynamic and their function depends upon PFD and MFD mode > setting. > > Perhaps the author(s) could offer some help. ;-) > > If you want to try the same with my TSR2, > (http://v-twin.dynip.sapo.pt/alan/VickersAircaft/TSR2/TSR2.zip) operate the > 'lamp select' toggle switch below the brilliance control, which is on the > bottom left of the circular map display. > > Alan > Hi Alan, Thank you ;=)) Yes, on both the hondajet and da42, clicking the first button on the bottom row of each, the PFD, and MFD, DID THE TRICK ;=)) I 'thought' I had tried this before but obviously NOT ;=() And reminding me of the ctrl+c, to highlight the 'clickable' items also helped... I had forgotten this ;=(( So many things/keys to remember... The display is BEAUTIFUL ;=)) Now, even more than before, I want DETAILED, feature rich images ;=)) If only I can find a WMS server to fully oblige... and maybe as some have suggested, that could be the online, if available, 'source' of the display... And/or convince Atlas/Map to also add airport/navaid overlays onto the maps, like it did in the past... either as an option to Map, during the map creation, or have a capability in Atlas to dump the maps-with-nice-detailed-overlays to disk... BUT ANYWAY, TAR MUCHLY ;=)) Just a idle thought... lots of aircraft could benefit from having such PFD/MFD displays... maybe as a sort of hand held device you carry on board, without all the modes/autopilot features, since we do need to keep the 'realism' of only what exists in each aircraft at manufacture... Sort of like a 'super' hand-held GPS device... or maybe we have that already??? Have downloaded your TSR2.zip - quite a slow download, but no problem - and thank you. I assume I unzip this into a new folder - /Aircraft/TSR2 and looking forward to trying this also as soon as time allows... Many thanks again... Regards, Geoff. -- RSA(R) Conference 2012 Save $700 by Nov 18 Register now http://p.sf.net/sfu/rsa-sfdev2dev1 ___ Flightgear-devel mailing list Flightgear-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/flightgear-devel
[Flightgear-devel] ..both fgdata mirrors still gives me the same good old un-split fgdata?
Hi, ..does both git clone git://gitorious.org/fg/fgdata.git and git clone git://mapserver.flightgear.org/fgdata still give us the same good old un-split fgdata? ..I found them slightly different: ... Cloning into fgdata... remote: Counting objects: 171405, done. remote: Compressing objects: 100% (66543/66543), done. ^Carnt@nb6:~/FG-git$ 1% (19898/171405), 191.00 MiB | 48 KiB/s arnt@nb6:~/FG-git$ ./download_and_compile.sh -s -a n -p n -j 2 DATA ** ** * Warning, the compilation process * * is going to use 9 or more Gbytes * * of space and at least a couple of * * hours to download and build FG.* ** * Please, be patient .. * ** ** FGFS ** Cloning into fgdata... remote: Counting objects: 171402, done. remote: Compressing objects: 100% (70966/70966), done. ...especially speedwise. ;o) -- ..med vennlig hilsen = with Kind Regards from Arnt Karlsen ...with a number of polar bear hunters in his ancestry... Scenarios always come in sets of three: best case, worst case, and just in case. --- /home/arnt/Downloads/download_and_compile.sh 2011-11-02 22:30:53.0 +0100 +++ download_and_compile.sh 2011-11-02 22:14:18.0 +0100 @@ -731,7 +731,9 @@ then EXDIR=$(pwd) cd $INSTALL_DIR_FGFS -echo -n "GIT DATA FROM git://gitorious.org/fg/fgdata.git ... " >> $LOGFILE +# echo -n "GIT DATA FROM git://gitorious.org/fg/fgdata.git ... " >> $LOGFILE +# +echo -n "GIT DATA FROM git clone git://mapserver.flightgear.org/fgdata ... " >> $LOGFILE #cvs -z5 -d :pserver:cvsguest:gu...@cvs.flightgear.org:/var/cvs/FlightGear-0.9 login #cvs -z5 -d :pserver:cvsgu...@cvs.flightgear.org:/var/cvs/FlightGear-0.9 co data @@ -740,7 +742,9 @@ echo "fgdata exists already." else # no repository yet - need to clone a fresh one - git clone git://gitorious.org/fg/fgdata.git + # git clone git://gitorious.org/fg/fgdata.git + # + git clone git://mapserver.flightgear.org/fgdata fi cd fgdata -- RSA(R) Conference 2012 Save $700 by Nov 18 Register now http://p.sf.net/sfu/rsa-sfdev2dev1___ Flightgear-devel mailing list Flightgear-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/flightgear-devel
Re: [Flightgear-devel] Terragear now sans plib
James Turner wrote: > On 2 Nov 2011, at 18:51, James Turner wrote: > >>> In normal operation, "raw2ascii" should almost immediately start >>> writing lots of files to "${WORKDIR}/SRTM-30-ASCII/e020n90/", but with >>> current simgear/terragear-cs I'm just getting an insane number of >>> lines: >> >> Thanks Martin, will take a look. > > Fixed now, at least, it generated a ton of .dem files for me. Really ? And you're on simgear/next and terragear-cs/cmake-integration without local changes ? Cheers, Martin. -- Unix _IS_ user friendly - it's just selective about who its friends are ! -- -- RSA(R) Conference 2012 Save $700 by Nov 18 Register now http://p.sf.net/sfu/rsa-sfdev2dev1 ___ Flightgear-devel mailing list Flightgear-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/flightgear-devel
Re: [Flightgear-devel] Terragear memory usage issue
Tom thanks for that terragear-cs81244fb0fe41dfc9d87b28baffdd5754b3801952 simgear 6250f675db9fdd6f2aef7be43207cd0ac0b6baeb Jason On Wed, 2011-11-02 at 07:12 -0700, Tom P wrote: > Hi Jason > > > You can open a terminal in the terragear-cs directory and type: > > > git show > > > The first lines show the commit ID, committer and short description > for the last commit, and the commit ID is the version information you > are looking for, > > > Hope this helps, > > > Tom > > > On Tue, Nov 1, 2011 at 2:43 PM, Jason Cox wrote: > Chris, > short of knowing how to tell versions of code with git all I > can say is > that I pulled the repo on the 20th of October for both > terragear-cs and > compiled it against the main simgear of the same day. > > If there is a way to ask git the version then let me know and > I will > report back for you. > > Jason > > PS I have uploaded some more scenery for NSW,Vic and Tas to my > dropbox > account for those interested > http://dl.dropbox.com/u/3028956/Aus-SE_Scenery.tar.bz2 > > > > > > > On Tue, 2011-11-01 at 08:03 +0100, Christian Schmitt wrote: > > Jason Cox wrote: > > > > > I would try a larger area, say 1x1 deg or larger and then > and then you > > > will see the list grow to include tiles that are no longer > needed. > > > > > > > I created a 2x3 degree area. No problems. What terragear-cs > version do you > > use and against which simgear do you compile it? > > > > Will now test even further and create another area. > > > > Chris > > > > > > -- > > RSA® Conference 2012 > > Save $700 by Nov 18 > > Register now > > http://p.sf.net/sfu/rsa-sfdev2dev1 > > ___ > > Flightgear-devel mailing list > > Flightgear-devel@lists.sourceforge.net > > > https://lists.sourceforge.net/lists/listinfo/flightgear-devel > > > > > > -- > RSA® Conference 2012 > Save $700 by Nov 18 > Register now! > > http://p.sf.net/sfu/rsa-sfdev2dev1 > ___ > Flightgear-devel mailing list > Flightgear-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/flightgear-devel > > > > -- > RSA® Conference 2012 > Save $700 by Nov 18 > Register now! > http://p.sf.net/sfu/rsa-sfdev2dev1 > ___ Flightgear-devel mailing list > Flightgear-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/flightgear-devel -- RSA(R) Conference 2012 Save $700 by Nov 18 Register now http://p.sf.net/sfu/rsa-sfdev2dev1 ___ Flightgear-devel mailing list Flightgear-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/flightgear-devel
Re: [Flightgear-devel] moving map of Hondajet or Da-42 // nextscenerygeneration
Geoff I have just tried the Hondajet and this works. ( If needed press Ctrl-C to highlight the hot-spot controls.) On the left hand screen (the PFD) I pressed the 1st button on the bottom row below the screen. The main flight instruments (horizon etc.) appeared on the screen. I repeated this with the right hand screen (the MFD) and the map came up. The buttons are dynamic and their function depends upon PFD and MFD mode setting. Perhaps the author(s) could offer some help. ;-) If you want to try the same with my TSR2, (http://v-twin.dynip.sapo.pt/alan/VickersAircaft/TSR2/TSR2.zip) operate the 'lamp select' toggle switch below the brilliance control, which is on the bottom left of the circular map display. Alan -Original Message- From: Geoff McLane Sent: Wednesday, November 02, 2011 6:48 PM To: FlightGear developers discussions Subject: Re: [Flightgear-devel] moving map of Hondajet or Da-42 // nextscenerygeneration On Mon, 2011-10-31 at 09:54 +, Alan Teeder wrote: > That means the maps should be in /home/michael/.fgfs/zkv1000/maps/terrain > (note /terrain at the end!). > > -Original Message- > From: Michael Sgier > Sent: Monday, October 31, 2011 7:42 AM > To: FlightGear developers discussions > Subject: Re: [Flightgear-devel] moving map of Hondajet or Da-42 // > nextscenerygeneration > > Thanks Alan. > No wonder it doesn't show anything: > > /home/michael/.fgfs/zkv1000/maps > ../../../../../../../../../home/michael/.fgfs/zkv1000/maps > zkv1000 loaded > zkv1000 PFD switched on! > zkv1000 MFD switched on! > Hi, Ok, I moved the maps, and get the same output, with my home path of course, except the 'switched on' part... How do I switch them ON? I think I have moved/clicked EVERYTHING I could find in both the hondajet and da42, and still no map display... Maybe I missed this information... Regards, Geoff. -- RSA® Conference 2012 Save $700 by Nov 18 Register now! http://p.sf.net/sfu/rsa-sfdev2dev1 ___ Flightgear-devel mailing list Flightgear-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/flightgear-devel -- RSA(R) Conference 2012 Save $700 by Nov 18 Register now http://p.sf.net/sfu/rsa-sfdev2dev1 ___ Flightgear-devel mailing list Flightgear-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/flightgear-devel
Re: [Flightgear-devel] Terragear now sans plib
On 2 Nov 2011, at 18:51, James Turner wrote: >> In normal operation, "raw2ascii" should almost immediately start >> writing lots of files to "${WORKDIR}/SRTM-30-ASCII/e020n90/", but with >> current simgear/terragear-cs I'm just getting an insane number of >> lines: > > Thanks Martin, will take a look. Fixed now, at least, it generated a ton of .dem files for me. (Minor tweak to the config.h creation - I suspect there's actually a more subtle bug in rawdem.c, but that's not a file we've actually changed at all, so the CMake behaviour matches the automake behaviour now) James -- RSA(R) Conference 2012 Save $700 by Nov 18 Register now http://p.sf.net/sfu/rsa-sfdev2dev1 ___ Flightgear-devel mailing list Flightgear-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/flightgear-devel
Re: [Flightgear-devel] Terragear now sans plib
On 2 Nov 2011, at 18:33, Martin Spott wrote: > In normal operation, "raw2ascii" should almost immediately start > writing lots of files to "${WORKDIR}/SRTM-30-ASCII/e020n90/", but with > current simgear/terragear-cs I'm just getting an insane number of > lines: Thanks Martin, will take a look. James -- RSA(R) Conference 2012 Save $700 by Nov 18 Register now http://p.sf.net/sfu/rsa-sfdev2dev1 ___ Flightgear-devel mailing list Flightgear-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/flightgear-devel
Re: [Flightgear-devel] moving map of Hondajet or Da-42 // nextscenerygeneration
On Mon, 2011-10-31 at 09:54 +, Alan Teeder wrote: > That means the maps should be in /home/michael/.fgfs/zkv1000/maps/terrain > (note /terrain at the end!). > > -Original Message- > From: Michael Sgier > Sent: Monday, October 31, 2011 7:42 AM > To: FlightGear developers discussions > Subject: Re: [Flightgear-devel] moving map of Hondajet or Da-42 // > nextscenerygeneration > > Thanks Alan. > No wonder it doesn't show anything: > > /home/michael/.fgfs/zkv1000/maps > ../../../../../../../../../home/michael/.fgfs/zkv1000/maps > zkv1000 loaded > zkv1000 PFD switched on! > zkv1000 MFD switched on! > Hi, Ok, I moved the maps, and get the same output, with my home path of course, except the 'switched on' part... How do I switch them ON? I think I have moved/clicked EVERYTHING I could find in both the hondajet and da42, and still no map display... Maybe I missed this information... Regards, Geoff. -- RSA® Conference 2012 Save $700 by Nov 18 Register now! http://p.sf.net/sfu/rsa-sfdev2dev1 ___ Flightgear-devel mailing list Flightgear-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/flightgear-devel
Re: [Flightgear-devel] Terragear now sans plib
Martin Spott wrote: > Yes, "raw2ascii" doesn't work with both "simgear" and "terragear-cs" > HEAD and therefore "demchop" is still untested. I'll provide a test > case as soon as time permits - spare time is a bit tight these days. Ok, try this - get the data files from: ftp://ftp.ihg.uni-duisburg.de/GIS/GISData/SRTM/version2_1/HGT/SRTM30/e020n90/ ... and run: DATADIR=${HOME}/archive/GIS/GISData/SRTM/version2_1/HGT/SRTM30 WORKDIR=${HOME}/workdir mkdir -p ${WORKDIR}/tmp cd ${WORKDIR}/tmp unzip ${DATADIR}/e020n90/e020n90.dem.zip unzip ${DATADIR}/e020n90/e020n90.hdr.zip mkdir -p ${WORKDIR}/SRTM-30-ASCII/e020n90 raw2ascii E020N90 ${WORKDIR}/SRTM-30-ASCII/e020n90 In normal operation, "raw2ascii" should almost immediately start writing lots of files to "${WORKDIR}/SRTM-30-ASCII/e020n90/", but with current simgear/terragear-cs I'm just getting an insane number of lines: - ignore for now Cheers, Martin. -- Unix _IS_ user friendly - it's just selective about who its friends are ! -- -- RSA® Conference 2012 Save $700 by Nov 18 Register now! http://p.sf.net/sfu/rsa-sfdev2dev1 ___ Flightgear-devel mailing list Flightgear-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/flightgear-devel
Re: [Flightgear-devel] Serving maps from internet;
Hi Martin, Thanks for the reply... Sorry to disturb you again. I know you are probably quite busy, some of which may be getting ready for FSWeekEnd - I will not be able to attend this year ;=(( - but I do not quite understand mapserver's WMS response... I send a URL with say a BBOX - &SRS=EPSG:900913 &BBOX=755972.40132839,6797404.6358777,\ 765756.34094714,6807188.5754964 That is exactly at a Resolution of 9783.93961875... and get a reply - [An error occurred: Current x value 755972.401328 is too far from tile corner x 753363.347055] It seems as if I MUST know the exact boundaries, the precise corners of an 'existing' tile, or something... Earlier I was getting an error like can not match resolution, until I started using exact resolution values from the capabilities xml... Maybe, as usual, I am doing something really stupid ;=(( The full text of this last run is here, with the URLS used, and various other 'debug' information, like the equivalent WSG84 values - http://geoffair.org/tmp/templog.txt This run was using LAYERS=customscene, but I have tried various layers listed in the capabilities xml, but always with the same result... x value too far... even though in some case also 'quite' close... Hope you can help... Regards, Geoff. PS: OT: Just discovered Evolution WILL fill in the dev list email address if I use [Reply All] instead of just [Reply]. One mystery solved ;=)) -- RSA® Conference 2012 Save $700 by Nov 18 Register now! http://p.sf.net/sfu/rsa-sfdev2dev1 ___ Flightgear-devel mailing list Flightgear-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/flightgear-devel
Re: [Flightgear-devel] Terragear memory usage issue
Hi Jason You can open a terminal in the terragear-cs directory and type: git show The first lines show the commit ID, committer and short description for the last commit, and the commit ID is the version information you are looking for, Hope this helps, Tom On Tue, Nov 1, 2011 at 2:43 PM, Jason Cox wrote: > Chris, > short of knowing how to tell versions of code with git all I can say is > that I pulled the repo on the 20th of October for both terragear-cs and > compiled it against the main simgear of the same day. > > If there is a way to ask git the version then let me know and I will > report back for you. > > Jason > > PS I have uploaded some more scenery for NSW,Vic and Tas to my dropbox > account for those interested > http://dl.dropbox.com/u/3028956/Aus-SE_Scenery.tar.bz2 > > > > > > On Tue, 2011-11-01 at 08:03 +0100, Christian Schmitt wrote: > > Jason Cox wrote: > > > > > I would try a larger area, say 1x1 deg or larger and then and then you > > > will see the list grow to include tiles that are no longer needed. > > > > > > > I created a 2x3 degree area. No problems. What terragear-cs version do > you > > use and against which simgear do you compile it? > > > > Will now test even further and create another area. > > > > Chris > > > > > -- > > RSA® Conference 2012 > > Save $700 by Nov 18 > > Register now > > http://p.sf.net/sfu/rsa-sfdev2dev1 > > ___ > > Flightgear-devel mailing list > > Flightgear-devel@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/flightgear-devel > > > > > -- > RSA® Conference 2012 > Save $700 by Nov 18 > Register now! > http://p.sf.net/sfu/rsa-sfdev2dev1 > ___ > Flightgear-devel mailing list > Flightgear-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/flightgear-devel > -- RSA® Conference 2012 Save $700 by Nov 18 Register now! http://p.sf.net/sfu/rsa-sfdev2dev1___ Flightgear-devel mailing list Flightgear-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/flightgear-devel
Re: [Flightgear-devel] Terragear now sans plib
Christian Schmitt wrote: > Not only can I hgtchop, but also build scenery chunks again. So from my > point of view the problems are solved. Are there any objections against > pushing the changes to master? Yes, "raw2ascii" doesn't work with both "simgear" and "terragear-cs" HEAD and therefore "demchop" is still untested. I'll provide a test case as soon as time permits - spare time is a bit tight these days. Cheers, Martin. -- Unix _IS_ user friendly - it's just selective about who its friends are ! -- -- RSA® Conference 2012 Save $700 by Nov 18 Register now! http://p.sf.net/sfu/rsa-sfdev2dev1 ___ Flightgear-devel mailing list Flightgear-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/flightgear-devel
Re: [Flightgear-devel] Terragear now sans plib
James Turner wrote: > I've pushed a fix to Simgear, updated the tests, and now I can run hgtchop > happily with latest simgear and terragear. Not only can I hgtchop, but also build scenery chunks again. So from my point of view the problems are solved. Are there any objections against pushing the changes to master? So this gets some more testing and more people can make use of the improvements. Chris -- RSA® Conference 2012 Save $700 by Nov 18 Register now! http://p.sf.net/sfu/rsa-sfdev2dev1 ___ Flightgear-devel mailing list Flightgear-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/flightgear-devel