A mi mepaso lo mismo, la solución puede ser cambiar los valores por
defecto del QUERY , que estan en el mensaje CPX2D06
WRKMSGD CPX2D06
opcion 2 (cambiar)}
yo tengo :
42$11 -
2$ 1112
si con esto no
losolucionas,puedesleerte el resto del mensaje que te
explica que significa cada simbolo
IDDU or QUERY :Values contained in this message
are to be used in order to determinethe initial values placed on a display
such as the IDDU or QUERY"Describe Numeric Field Editing" screen when
numeric editing informationfor the field definition is not yet
defined::p. 4: Default date/time
separator... 1=period,
2=comma, 3=colon, 4=slash, 5=dash:p. 1: Default decimal
separator... 1=period,
2=comma, 3=colon, 4=currency symbol, 5=none:p. $:
Character to be used as symbol for decimal
separator. The '$' to be
translated is the English default
for decimal separator if
option 4=currency symbol is
selected on the previous
item, above. It can be translated to
any other single byte
character. That same symbol should
be made to appear on the
following 'Describe Numeric
Field Editing'
displays:
Component Product NTVSRC DDS
Display
- --- --
---
IDDU XPF
QDIDDU
DSE1FM01
Query QRY
QUDDS
F17EDIT
Office XPF
QDOEDSPF NUMEDIT1 (See NOTE
below) NOTE: The profile
document, SYSTEM, stored in QPRFFLR
should also be translated to
correspond to the decimal point
option 4 value, just as CPX2D06
was translated to correspond to
the decimal point option 4 value
that appears on IDDU and QUERY
displays. See folder handlin section of publication 5728
WP1 Office NLV Build Proce for
more information.:p. 2: Default thousands
separator... 1=period,
2=comma, 3=apostrophe, 4=blank, 5=none:p. 2: Default for
show negative symbol 1=yes,
show a negative symbol for negative
numbers 2=no, do not show a
negative symbol:p. blanks: Left negative symbol default
value... All blanks means no
symbol is shown. Up to six
characters which constitute the
symbol. Leading and/or
embedded blanks are
allowable. Underscore can be
used to represent a blank.
Trailing blanks, if desired, must be shown as underscore.:p. -: Right
negative symbol default
value... All blanks means no
symbol is shown. Up to six
characters which constitute the
symbol. Leading and/or
embedded blanks are
allowable. Underscore can be
used to represent a blank.
Trailing blanks, if desired, must be shown as underscore.:p. 2: Default for
show currency symbol 1=yes,
show a currency symbol 2=no,
do not show a currency symbol:p. $: Left currency symbol default
value... All blanks means no
symbol is shown. Up to six
characters which constitute the
symbol. Leading and/or
embedded blanks are
allowable. Underscore can be
used to represent a blank.
Trailing blanks, if desired, must be shown as underscore.:p. blanks: Right
currency symbol default
value... All blanks means no
symbol is shown. Up to six
characters which constitute the
symbol. Leading and/or
embedded blanks are
allowable. Underscore can be
used to represent a blank.
Trailing blanks, if desired, must be shown as underscore.:p. 1: Default for
print zero value 1=yes,
print zero value as zero
2=no, print zero value as blank:p. 1: Default for replace leading
zeroes 1=yes, do leading
zero replacement 2=no,
do not replace leading zeroes:p. 1: Default for leading zeroes replacement
character 1=replace with
blanks 2=replace with
asterisks 3=replace with
blanks and float the left currency symbol:p. 2: Default for show single
leading zero 1=yes, leave a
leading zero to the left of the
decimal
separator when the absolute value of the number is
less than
1.0 2=no, do not leave a
leading zero