[stclwrsig-l] Question on FF -> RH conversion

[John Sgammato]

Checking Pagination should do the trick -you don't have to edit style as well. 
Just check Pagination for your Heading 1 and Heading 2 and Title if you have 
something like that.
john

-Original Message-
From: stclwrsig-l-bounces+jsgammato=imprivata.com at mailman.stc.org 
[mailto:stclwrsig-l-bounces+jsgammato=imprivata@mailman.stc.org] On Behalf 
Of Grant Hogarth
Sent: Monday, October 17, 2011 11:50 AM
To: Frame Users
Cc: Lone Writers List
Subject: Re: [stclwrsig-l] Question on FF -> RH conversion

Apologies for incomplete/distorted information.

I'm using a demo version of TCS 3.5 (FM 10.0.1.408 & RH 9.0.1.262) on 
Windows Vista (fully patched).

I'm trying to split on FM styles "heading 1" and "heading 2".
The formats are mapped.

I selected "Pagination", and then after clicking "Edit Style", I 
selected Format> Paragraph> New Page.
===
In response to:

Jeff Coatsworth:
That should work - you're sure that the FM doc has "Heading1" as its paragraph 
format? What versions of FM and RH are you using?

Bill Swallow:
I see a disconnect here. You mention "Level1 Head" and "Heading1". Are
these formats mapped? Also, which versions of the tools are you using?
Part of TCS?


On 10/15/2011 2:26 PM, Grant Hogarth wrote:
> I'm trying to move a FM book to RH to produce Eclipse Help output.
> Where I'm breaking my brain is on trying to get the RH import to split 
> off a new topic at each Level1 Head.
> I've set the import (.isf) file to paginate on Heading1, but that does 
> not seem to split the files as desired.
> What am I missing?
> (or do the FM files need to be split from chapters into 1-page topics 
> separately?)
>
> Thanks!
> Grant
> _
___
stclwrsig-l mailing list
stclwrsig-l at mailman.stc.org
http://mailman.stc.org/mailman/listinfo/stclwrsig-l

[stclwrsig-l] Question on FF -> RH conversion

[Grant Hogarth]

That was the problem!!!
ONLY  check pagination.  (& solved some other problems too!)

Thanks John!
Grant

On 10/17/2011 11:01 AM, John Sgammato wrote:
> Checking Pagination should do the trick -you don't have to edit style as 
> well. Just check Pagination for your Heading 1 and Heading 2 and Title if you 
> have something like that.
> john
>
> -Original Message-
> From: stclwrsig-l-bounces+jsgammato=imprivata.com at mailman.stc.org 
> [mailto:stclwrsig-l-bounces+jsgammato=imprivata.com at mailman.stc.org] On 
> Behalf Of Grant Hogarth
> Sent: Monday, October 17, 2011 11:50 AM
> To: Frame Users
> Cc: Lone Writers List
> Subject: Re: [stclwrsig-l] Question on FF ->  RH conversion
>
> Apologies for incomplete/distorted information.
>
> I'm using a demo version of TCS 3.5 (FM 10.0.1.408&  RH 9.0.1.262) on
> Windows Vista (fully patched).
>
> I'm trying to split on FM styles "heading 1" and "heading 2".
> The formats are mapped.
>
> I selected "Pagination", and then after clicking "Edit Style", I
> selected Format>  Paragraph>  New Page.
> ===
> In response to:
>
> Jeff Coatsworth:
> That should work - you're sure that the FM doc has "Heading1" as its 
> paragraph format? What versions of FM and RH are you using?
>
> Bill Swallow:
> I see a disconnect here. You mention "Level1 Head" and "Heading1". Are
> these formats mapped? Also, which versions of the tools are you using?
> Part of TCS?
>
>
> On 10/15/2011 2:26 PM, Grant Hogarth wrote:
>> I'm trying to move a FM book to RH to produce Eclipse Help output.
>> Where I'm breaking my brain is on trying to get the RH import to split
>> off a new topic at each Level1 Head.
>> I've set the import (.isf) file to paginate on Heading1, but that does
>> not seem to split the files as desired.
>> What am I missing?
>> (or do the FM files need to be split from chapters into 1-page topics
>> separately?)
>>
>> Thanks!
>> Grant
>>

Separating data in a Single FrameMaker File

[MamaRed]

I second the vote to pull in Rick Quatro...he is awesome at handling that
kind of stuff and doing it quickly.

On Mon, Oct 17, 2011 at 10:02 AM, George, Brenda (CAI) <
BGeorge at federatedinv.com> wrote:

> We are attempting to take a FrameMaker file that contains a large number of
> individual mutual fund files and break out each mutual fund into individual
> files. 
>
> ** **
>
> There is an automated process that was internally created to do this, but
> it is not functioning properly. In order to break out each file we use each
> funds unique product code. In addition to separating each fund the program
> also removed sector tabs in each file and the page numbers.
>
> ** **
>
> Is there a fast way that we can break this data out within a FrameMaker
> file?
>
> ** **
>
> Brenda George
>
> Desk: (724) 720-8491
>
> bgeorge at federatedinv.com
>
> ** **
> - Unless notified to the contrary
> by the sender, the recipient should consider the contents of this message
> including any attachments to be confidential. If you are not the intended
> recipient and have received this message in error, please contact Federated
> Investors immediately by forwarding this email to notify at 
> federatedinv.comand then delete this message from your system. Saving, 
> copying or
> disseminating an inadvertently received email could violate state and
> Federal privacy laws. All emails received by or sent from Federated may be
> provided to regulators or law enforcement agencies, or used for other
> purposes consistent with Federated's business interests. Thank you for your
> cooperation.
> ___
>
>
> You are currently subscribed to framers as jerilynne.knight at gmail.com.
>
> Send list messages to framers at lists.frameusers.com.
>
> To unsubscribe send a blank email to
> framers-unsubscribe at lists.frameusers.com
> or visit
> http://lists.frameusers.com/mailman/options/framers/jerilynne.knight%40gmail.com
>
> Send administrative questions to listadmin at frameusers.com. Visit
> http://www.frameusers.com/ for more resources and info.
>
>


-- 
love and light, hugs and blessings
<http://www.mylivesignature.com/>
MamaRed Knight
coach | speaker | strategist | geekette

igKnighting passionately powerful possibilities? <http://mamaredspeaks.com/>

and
helping women be so SELF-ISH they transform their
world<http://theselfishformula.com/>


P.S. Are you SELF-ISH enough? Then its time to get that way, because the
folks in your world need you to live your gifts and share your unique
message.

Let's connect  <http://www.facebook.com/mamared>
Facebook<http://www.facebook.com/mamared>
  <http://www.linkedin.com/in/jerilynneknight>
LinkedIn<http://www.linkedin.com/in/jerilynneknight>
  <http://flickr.com/mamared2002> Flickr
<http://flickr.com/mamared2002> <http://twitter.com/mama_red>
 Twitter <http://twitter.com/mama_red>

Let's talk: [image: Google Talk] jerilynne.knight [image: Skype] mamared2002
| 203.MAMA054 (203.626.2054)
-- next part --
An HTML attachment was scrubbed...
URL: 
<http://lists.frameusers.com/pipermail/framers/attachments/20111017/3de77cdc/attachment.html>

Ann: NEWS at tekom conference

[Georg Eck]

FrameMaker users,



we are proud to announce some really great features for Finalyser with
FrameMaker 10

+ Finalyser 0047

   + Background for objects - now as group

   + ExtendScript*): Change conditional in a book   

+ Finalyser TERM CHECK - Check your Terminology in FrameMaker

+ Finalyser CMS/DMS - with Adobe CRX and the Publishing Server 
   to generate REVERB and other mobile Output



Sample Output for mobile Devices:
Embedded 3D, Video and 3D-PDF: www.squidds.de/downloads/bihler



*) ExtendScript are for free for every monthly release



More Info:  www.finalyser.com



-  Georg

-- next part --
An HTML attachment was scrubbed...
URL: 
<http://lists.frameusers.com/pipermail/framers/attachments/20111017/71a10fed/attachment.html>

Question on FF -> RH conversion

[Bill Swallow]

I see a disconnect here. You mention "Level1 Head" and "Heading1". Are
these formats mapped? Also, which versions of the tools are you using?
Part of TCS?

On Sat, Oct 15, 2011 at 4:26 PM, Grant Hogarth  wrote:
> I'm trying to move a FM book to RH to produce Eclipse Help output.
> Where I'm breaking my brain is on trying to get the RH import to split off a
> new topic at each Level1 Head.
> I've set the import (.isf) file to paginate on Heading1, but that does not
> seem to split the files as desired.
> What am I missing?
> (or do the FM files need to be split from chapters into 1-page topics
> separately?)

-- 
Bill Swallow

Twitter: @techcommdood
Blog: http://techcommdood.com
LinkedIn: http://www.linkedin.com/in/techcommdood

RE: [stclwrsig-l] Question on FF -> RH conversion

[John Sgammato]

Checking Pagination should do the trick -you don't have to edit style as well. 
Just check Pagination for your Heading 1 and Heading 2 and Title if you have 
something like that.
john

-Original Message-
From: stclwrsig-l-bounces+jsgammato=imprivata@mailman.stc.org 
[mailto:stclwrsig-l-bounces+jsgammato=imprivata@mailman.stc.org] On Behalf 
Of Grant Hogarth
Sent: Monday, October 17, 2011 11:50 AM
To: Frame Users
Cc: Lone Writers List
Subject: Re: [stclwrsig-l] Question on FF -> RH conversion

Apologies for incomplete/distorted information.

I'm using a demo version of TCS 3.5 (FM 10.0.1.408 & RH 9.0.1.262) on 
Windows Vista (fully patched).

I'm trying to split on FM styles "heading 1" and "heading 2".
The formats are mapped.

I selected "Pagination", and then after clicking "Edit Style", I 
selected Format> Paragraph> New Page.
===
In response to:

Jeff Coatsworth:
That should work - you're sure that the FM doc has "Heading1" as its paragraph 
format? What versions of FM and RH are you using?

Bill Swallow:
I see a disconnect here. You mention "Level1 Head" and "Heading1". Are
these formats mapped? Also, which versions of the tools are you using?
Part of TCS?


On 10/15/2011 2:26 PM, Grant Hogarth wrote:
> I'm trying to move a FM book to RH to produce Eclipse Help output.
> Where I'm breaking my brain is on trying to get the RH import to split 
> off a new topic at each Level1 Head.
> I've set the import (.isf) file to paginate on Heading1, but that does 
> not seem to split the files as desired.
> What am I missing?
> (or do the FM files need to be split from chapters into 1-page topics 
> separately?)
>
> Thanks!
> Grant
> _
___
stclwrsig-l mailing list
stclwrsi...@mailman.stc.org
http://mailman.stc.org/mailman/listinfo/stclwrsig-l
___


You are currently subscribed to framers as arch...@mail-archive.com.

Send list messages to framers@lists.frameusers.com.

To unsubscribe send a blank email to
framers-unsubscr...@lists.frameusers.com
or visit 
http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com

Send administrative questions to listad...@frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.

Separating data in a Single FrameMaker File

[George, Brenda (CAI)]

We are attempting to take a FrameMaker file that contains a large number of 
individual mutual fund files and break out each mutual fund into individual 
files.

There is an automated process that was internally created to do this, but it is 
not functioning properly. In order to break out each file we use each funds 
unique product code. In addition to separating each fund the program also 
removed sector tabs in each file and the page numbers.

Is there a fast way that we can break this data out within a FrameMaker file?

Brenda George
Desk: (724) 720-8491
bgeorge at federatedinv.com



- Unless notified to the
contrary by the sender, the recipient should consider the contents
of this message including any attachments to be confidential. If
you are not the intended recipient and have received this message
in error, please contact Federated Investors immediately by
forwarding this email to notify at federatedinv.com and then delete
this message from your system. Saving, copying or disseminating an
inadvertently received email could violate state and Federal
privacy laws. All emails received by or sent from Federated may be
provided to regulators or law enforcement agencies, or used for
other purposes consistent with Federated's business interests.
Thank you for your cooperation.
-- next part --
An HTML attachment was scrubbed...
URL: 
<http://lists.frameusers.com/pipermail/framers/attachments/20111017/3478adc6/attachment.html>

insufficient memory to import file

[Eric Dunn]

Well, it's been a long time since I've done more than browse the
messages from the Framerslist.

Hopefully someone might be able to help me though.

When opening xml files with CGM graphics, I keep getting the message
"insufficient memory to import file" in the XML Read Report Log.
Graphics elements are stripped from the document and the document
becomes invalid. Not to mentions this is disastrous if the error is
overlooked and the file is saved. All graphics need to be re-imported.

FrameMaker 7.1, Windows XP Professional SP3,  4Gb RAM

Question on FF -> RH conversion

[Grant Hogarth]

Apologies for incomplete/distorted information.

I'm using a demo version of TCS 3.5 (FM 10.0.1.408 & RH 9.0.1.262) on 
Windows Vista (fully patched).

I'm trying to split on FM styles "heading 1" and "heading 2".
The formats are mapped.

I selected "Pagination", and then after clicking "Edit Style", I 
selected Format> Paragraph> New Page.
===
In response to:

Jeff Coatsworth:
That should work - you're sure that the FM doc has "Heading1" as its paragraph 
format? What versions of FM and RH are you using?

Bill Swallow:
I see a disconnect here. You mention "Level1 Head" and "Heading1". Are
these formats mapped? Also, which versions of the tools are you using?
Part of TCS?


On 10/15/2011 2:26 PM, Grant Hogarth wrote:
> I'm trying to move a FM book to RH to produce Eclipse Help output.
> Where I'm breaking my brain is on trying to get the RH import to split 
> off a new topic at each Level1 Head.
> I've set the import (.isf) file to paginate on Heading1, but that does 
> not seem to split the files as desired.
> What am I missing?
> (or do the FM files need to be split from chapters into 1-page topics 
> separately?)
>
> Thanks!
> Grant
> _

Re: Separating data in a Single FrameMaker File

[MamaRed]

I second the vote to pull in Rick Quatro...he is awesome at handling that
kind of stuff and doing it quickly.

On Mon, Oct 17, 2011 at 10:02 AM, George, Brenda (CAI) <
bgeo...@federatedinv.com> wrote:

> We are attempting to take a FrameMaker file that contains a large number of
> individual mutual fund files and break out each mutual fund into individual
> files. 
>
> ** **
>
> There is an automated process that was internally created to do this, but
> it is not functioning properly. In order to break out each file we use each
> funds unique product code. In addition to separating each fund the program
> also removed sector tabs in each file and the page numbers.
>
> ** **
>
> Is there a fast way that we can break this data out within a FrameMaker
> file?
>
> ** **
>
> Brenda George
>
> Desk: (724) 720-8491
>
> bgeo...@federatedinv.com
>
> ** **
> - Unless notified to the contrary
> by the sender, the recipient should consider the contents of this message
> including any attachments to be confidential. If you are not the intended
> recipient and have received this message in error, please contact Federated
> Investors immediately by forwarding this email to notify@federatedinv.comand 
> then delete this message from your system. Saving, copying or
> disseminating an inadvertently received email could violate state and
> Federal privacy laws. All emails received by or sent from Federated may be
> provided to regulators or law enforcement agencies, or used for other
> purposes consistent with Federated's business interests. Thank you for your
> cooperation.
> ___
>
>
> You are currently subscribed to framers as jerilynne.kni...@gmail.com.
>
> Send list messages to framers@lists.frameusers.com.
>
> To unsubscribe send a blank email to
> framers-unsubscr...@lists.frameusers.com
> or visit
> http://lists.frameusers.com/mailman/options/framers/jerilynne.knight%40gmail.com
>
> Send administrative questions to listad...@frameusers.com. Visit
> http://www.frameusers.com/ for more resources and info.
>
>


-- 
love and light, hugs and blessings

MamaRed Knight
coach | speaker | strategist | geekette

igKnighting passionately powerful possibilities™ 

and
helping women be so SELF-ISH they transform their
world


P.S. Are you SELF-ISH enough? Then its time to get that way, because the
folks in your world need you to live your gifts and share your unique
message.

Let's connect  
Facebook
  
LinkedIn
   Flickr
 
 Twitter 

Let's talk: [image: Google Talk] jerilynne.knight [image: Skype] mamared2002
| 203.MAMA054 (203.626.2054)
___


You are currently subscribed to framers as arch...@mail-archive.com.

Send list messages to framers@lists.frameusers.com.

To unsubscribe send a blank email to
framers-unsubscr...@lists.frameusers.com
or visit 
http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com

Send administrative questions to listad...@frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.

How to display table title in text inset?

[Gay Alson]

Happy Monday morning, Framers,

I have a .fm source file that I want to use as a text inset. It contains
a table with a format in Table Designer defined as Title: Above Title.
In Paragraph Designer, the Table Title paragraph tag includes
autonumbering. In the source file, the table title appears correctly.
When I import the file into a destination doc, the autonumbering updates
but the table title is missing. That is, I see "Table 18:" instead of
"Table 18: Install Options"

I've imported table formats and paragraph formats from the same template
into both the source and the destination files. Does anyone know the
answer to this mystery?

TIA,

~~Gay



_

Gay Alson
Senior Technical Writer
Epicor Retail
www.epicor.com <http://www.epicor.com> 
Tel.: (514) 428-2116
Fax: (514) 426-0824
E-mail: galson at epicor.com <mailto:galson at epicor.com> 

Epicor (Incorporating NSB and CRS)
2800 Trans Canada Highway, Pointe Claire QC H9R 1T1


This e-mail is for the use of the intended recipient(s) only. If you have 
received this e-mail in error, please notify the sender immediately and then 
delete it. If you are not the intended recipient, you must not use, disclose or 
distribute this e-mail without the author's prior permission. We have taken 
precautions to minimize the risk of transmitting software viruses, but we 
advise you to carry out your own virus checks on any attachment to this 
message. We cannot accept liability for any loss or damage caused by software 
viruses.

Le present courriel est envoye a l'intention exclusive de son ou de ses 
destinataires. Si vous avez recu ce courriel par erreur, veuillez en aviser 
immediatement l'expediteur et supprimer ce message. Si vous n'etes pas le 
destinataire vise, nous vous informons que toute utilisation, divulgation ou 
distribution de cette communication est strictement interdite sans la 
permission prealable de l'auteur. Des precautions ont ete prises afin de 
reduire au maximum le risque de transmission de virus informatique, mais nous 
tenons a vous conseiller de proceder a vos propres verifications antivirus de 
toute piece jointe a ce message. Aucune responsabilite ne sera assumee a la 
suite de toute perte ou de tout dommage causes par des virus.


This message has been scanned for malware by Websense. www.websense.com
-- next part --
An HTML attachment was scrubbed...
URL: 
<http://lists.frameusers.com/pipermail/framers/attachments/20111017/8337a28f/attachment.html>

Question on FF -> RH conversion

[Jeff Coatsworth]

 That should work - you're sure that the FM doc has "Heading1" as its paragraph 
format? What versions of FM and RH are you using?

-Original Message-
From: framers-bounces at lists.frameusers.com 
[mailto:framers-boun...@lists.frameusers.com] On Behalf Of Grant Hogarth
Sent: Saturday, October 15, 2011 4:27 PM
To: Frame Users; Lone Writers List
Subject: Question on FF -> RH conversion

I'm trying to move a FM book to RH to produce Eclipse Help output.
Where I'm breaking my brain is on trying to get the RH import to split 
off a new topic at each Level1 Head.
I've set the import (.isf) file to paginate on Heading1, but that does 
not seem to split the files as desired.
What am I missing?
(or do the FM files need to be split from chapters into 1-page topics 
separately?)

Thanks!
Grant
___


You are currently subscribed to framers as jeff.coatsworth at jonassoftware.com.

Send list messages to framers at lists.frameusers.com.

To unsubscribe send a blank email to
framers-unsubscribe at lists.frameusers.com
or visit 
http://lists.frameusers.com/mailman/options/framers/jeff.coatsworth%40jonassoftware.com

Send administrative questions to listadmin at frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.

Japanese sort order in indexes

[Celine Deguire]

Hello

I would like to know how to define the Japanese sort order in FrameMaker 8.
I've searched online and the best result is an Adobe PDF about asian
languages for Framemaker 7 which is unclear. I am unsure whether this
subject was previously addressed and I apologize if it has.

Thanks in advance

Celine
-- next part --
An HTML attachment was scrubbed...
URL: 
<http://lists.frameusers.com/pipermail/framers/attachments/20111017/902f8fa6/attachment.html>

Japanese sort order in indexes

[Jeremy H. Griffith]

On Mon, 17 Oct 2011 08:56:15 -0400, Celine Deguire 
 wrote:

>I would like to know how to define the Japanese 
>sort order in FrameMaker 8.

The problem with Japanese is that it is not sorted
by the Unicode character order of the displayed
glyphs (which are usually katakana).  Instead, it 
is sorted according to the pronunciation of the
words, as given in a different script, kanji.
The software has no idea what the kanji is, so
you have to provide it by the usual Frame sort
order method, in []s for every single index entry.
Naturally this requires a Japanese native speaker.

Once you have all the kanji, and have the Japanese
version of the SortOrderIX entry on the index
reference page, you should be good to go.  If you 
can't find the kanji sort order, let me know and
I'll dig through archives here for one we used
while testing.

HTH!

-- Jeremy H. Griffith, at Omni Systems Inc.
http://www.omsys.com/

Re: Question on FF -> RH conversion

[Bill Swallow]

I see a disconnect here. You mention "Level1 Head" and "Heading1". Are
these formats mapped? Also, which versions of the tools are you using?
Part of TCS?

On Sat, Oct 15, 2011 at 4:26 PM, Grant Hogarth  wrote:
> I'm trying to move a FM book to RH to produce Eclipse Help output.
> Where I'm breaking my brain is on trying to get the RH import to split off a
> new topic at each Level1 Head.
> I've set the import (.isf) file to paginate on Heading1, but that does not
> seem to split the files as desired.
> What am I missing?
> (or do the FM files need to be split from chapters into 1-page topics
> separately?)

-- 
Bill Swallow

Twitter: @techcommdood
Blog: http://techcommdood.com
LinkedIn: http://www.linkedin.com/in/techcommdood
___


You are currently subscribed to framers as arch...@mail-archive.com.

Send list messages to framers@lists.frameusers.com.

To unsubscribe send a blank email to
framers-unsubscr...@lists.frameusers.com
or visit 
http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com

Send administrative questions to listad...@frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.

Re: Separating data in a Single FrameMaker File

[Writer]

Sounds like a job for Rick Quatro and FrameScript. *shines the Quatro signal 
into the sky*


Nadine



>
>From: "George, Brenda (CAI)" 
>To: "framers@lists.frameusers.com" 
>Sent: Monday, October 17, 2011 10:02:17 AM
>Subject: Separating data in a Single FrameMaker File
>
>
>We are attempting to take a FrameMaker file that contains a large number of 
>individual mutual fund files and break out each mutual fund into individual 
>files. 
> 
>There is an automated process that was internally created to do this, but it 
>is not functioning properly. In order to break out each file we use each funds 
>unique product code. In addition to separating each fund the program also 
>removed sector tabs in each file and the page numbers.
> 
>Is there a fast way that we can break this data out within a FrameMaker file?
> 
>Brenda George
>Desk: (724) 720-8491
>bgeo...@federatedinv.com
> 
- Unless notified to the contrary by 
the sender, the recipient should consider the contents of this message 
including any attachments to be confidential. If you are not the intended 
recipient and have received this message in error, please contact Federated 
Investors immediately by forwarding this email to not...@federatedinv.com and 
then delete this message from your system. Saving, copying or disseminating an 
inadvertently received email could violate state and Federal privacy laws. All 
emails received by or sent from Federated may be provided to regulators or law 
enforcement agencies, or used for other purposes consistent with Federated's 
business interests. Thank you for your cooperation.
>___
>
>
>You are currently subscribed to framers as generic...@yahoo.ca.
>
>Send list messages to framers@lists.frameusers.com.
>
>To unsubscribe send a blank email to
>framers-unsubscr...@lists.frameusers.com
>or visit 
>http://lists.frameusers.com/mailman/options/framers/generic668%40yahoo.ca
>
>Send administrative questions to listad...@frameusers.com. Visit
>http://www.frameusers.com/ for more resources and info.
>
>
>___


You are currently subscribed to framers as arch...@mail-archive.com.

Send list messages to framers@lists.frameusers.com.

To unsubscribe send a blank email to
framers-unsubscr...@lists.frameusers.com
or visit 
http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com

Send administrative questions to listad...@frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.

Separating data in a Single FrameMaker File

[Writer]

Sounds like a job for Rick Quatro and FrameScript. *shines the Quatro signal 
into the sky*


Nadine



>
>From: "George, Brenda (CAI)" 
>To: "framers at lists.frameusers.com" 
>Sent: Monday, October 17, 2011 10:02:17 AM
>Subject: Separating data in a Single FrameMaker File
>
>
>We are attempting to take a FrameMaker file that contains a large number of 
>individual mutual fund files and break out each mutual fund into individual 
>files. 
>?
>There is an automated process that was internally created to do this, but it 
>is not functioning properly. In order to break out each file we use each funds 
>unique product code. In addition to separating each fund the program also 
>removed sector tabs in each file and the page numbers.
>?
>Is there a fast way that we can break this data out within a FrameMaker file?
>?
>Brenda George
>Desk: (724) 720-8491
>bgeorge at federatedinv.com
>?
- Unless notified to the contrary by 
the sender, the recipient should consider the contents of this message 
including any attachments to be confidential. If you are not the intended 
recipient and have received this message in error, please contact Federated 
Investors immediately by forwarding this email to notify at federatedinv.com 
and then delete this message from your system. Saving, copying or disseminating 
an inadvertently received email could violate state and Federal privacy laws. 
All emails received by or sent from Federated may be provided to regulators or 
law enforcement agencies, or used for other purposes consistent with 
Federated's business interests. Thank you for your cooperation.
>___
>
>
>You are currently subscribed to framers as generic668 at yahoo.ca.
>
>Send list messages to framers at lists.frameusers.com.
>
>To unsubscribe send a blank email to
>framers-unsubscribe at lists.frameusers.com
>or visit 
>http://lists.frameusers.com/mailman/options/framers/generic668%40yahoo.ca
>
>Send administrative questions to listadmin at frameusers.com. Visit
>http://www.frameusers.com/ for more resources and info.
>
>
>
-- next part --
An HTML attachment was scrubbed...
URL: 
<http://lists.frameusers.com/pipermail/framers/attachments/20111017/3a9c8c2b/attachment.html>

Separating data in a Single FrameMaker File

[George, Brenda (CAI)]

We are attempting to take a FrameMaker file that contains a large number of 
individual mutual fund files and break out each mutual fund into individual 
files.

There is an automated process that was internally created to do this, but it is 
not functioning properly. In order to break out each file we use each funds 
unique product code. In addition to separating each fund the program also 
removed sector tabs in each file and the page numbers.

Is there a fast way that we can break this data out within a FrameMaker file?

Brenda George
Desk: (724) 720-8491
bgeo...@federatedinv.com



- Unless notified to the
contrary by the sender, the recipient should consider the contents
of this message including any attachments to be confidential. If
you are not the intended recipient and have received this message
in error, please contact Federated Investors immediately by
forwarding this email to not...@federatedinv.com and then delete
this message from your system. Saving, copying or disseminating an
inadvertently received email could violate state and Federal
privacy laws. All emails received by or sent from Federated may be
provided to regulators or law enforcement agencies, or used for
other purposes consistent with Federated's business interests.
Thank you for your cooperation.___


You are currently subscribed to framers as arch...@mail-archive.com.

Send list messages to framers@lists.frameusers.com.

To unsubscribe send a blank email to
framers-unsubscr...@lists.frameusers.com
or visit 
http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com

Send administrative questions to listad...@frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.

insufficient memory to import file

[Eric Dunn]

Well, it's been a long time since I've done more than browse the
messages from the Framerslist.

Hopefully someone might be able to help me though.

When opening xml files with CGM graphics, I keep getting the message
"insufficient memory to import file" in the XML Read Report Log.
Graphics elements are stripped from the document and the document
becomes invalid. Not to mentions this is disastrous if the error is
overlooked and the file is saved. All graphics need to be re-imported.

FrameMaker 7.1, Windows XP Professional SP3,  4Gb RAM
___


You are currently subscribed to framers as arch...@mail-archive.com.

Send list messages to framers@lists.frameusers.com.

To unsubscribe send a blank email to
framers-unsubscr...@lists.frameusers.com
or visit 
http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com

Send administrative questions to listad...@frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.

Re: Japanese sort order in indexes

[Jeremy H. Griffith]

On Mon, 17 Oct 2011 08:56:15 -0400, Celine Deguire 
 wrote:

>I would like to know how to define the Japanese 
>sort order in FrameMaker 8.

The problem with Japanese is that it is not sorted
by the Unicode character order of the displayed
glyphs (which are usually katakana).  Instead, it 
is sorted according to the pronunciation of the
words, as given in a different script, kanji.
The software has no idea what the kanji is, so
you have to provide it by the usual Frame sort
order method, in []s for every single index entry.
Naturally this requires a Japanese native speaker.

Once you have all the kanji, and have the Japanese
version of the SortOrderIX entry on the index
reference page, you should be good to go.  If you 
can't find the kanji sort order, let me know and
I'll dig through archives here for one we used
while testing.

HTH!

-- Jeremy H. Griffith, at Omni Systems Inc.
http://www.omsys.com/
___


You are currently subscribed to framers as arch...@mail-archive.com.

Send list messages to framers@lists.frameusers.com.

To unsubscribe send a blank email to
framers-unsubscr...@lists.frameusers.com
or visit 
http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com

Send administrative questions to listad...@frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.

RE: Question on FF -> RH conversion

[Jeff Coatsworth]

 That should work - you're sure that the FM doc has "Heading1" as its paragraph 
format? What versions of FM and RH are you using?

-Original Message-
From: framers-boun...@lists.frameusers.com 
[mailto:framers-boun...@lists.frameusers.com] On Behalf Of Grant Hogarth
Sent: Saturday, October 15, 2011 4:27 PM
To: Frame Users; Lone Writers List
Subject: Question on FF -> RH conversion

I'm trying to move a FM book to RH to produce Eclipse Help output.
Where I'm breaking my brain is on trying to get the RH import to split 
off a new topic at each Level1 Head.
I've set the import (.isf) file to paginate on Heading1, but that does 
not seem to split the files as desired.
What am I missing?
(or do the FM files need to be split from chapters into 1-page topics 
separately?)

Thanks!
Grant
___


You are currently subscribed to framers as jeff.coatswo...@jonassoftware.com.

Send list messages to framers@lists.frameusers.com.

To unsubscribe send a blank email to
framers-unsubscr...@lists.frameusers.com
or visit 
http://lists.frameusers.com/mailman/options/framers/jeff.coatsworth%40jonassoftware.com

Send administrative questions to listad...@frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.
___


You are currently subscribed to framers as arch...@mail-archive.com.

Send list messages to framers@lists.frameusers.com.

To unsubscribe send a blank email to
framers-unsubscr...@lists.frameusers.com
or visit 
http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com

Send administrative questions to listad...@frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.

Japanese sort order in indexes

[Celine Deguire]

Hello

I would like to know how to define the Japanese sort order in FrameMaker 8.
I've searched online and the best result is an Adobe PDF about asian
languages for Framemaker 7 which is unclear. I am unsure whether this
subject was previously addressed and I apologize if it has.

Thanks in advance

Celine
___


You are currently subscribed to framers as arch...@mail-archive.com.

Send list messages to framers@lists.frameusers.com.

To unsubscribe send a blank email to
framers-unsubscr...@lists.frameusers.com
or visit 
http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com

Send administrative questions to listad...@frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.

Question on FF -> RH conversion

[Grant Hogarth]

I'm trying to move a FM book to RH to produce Eclipse Help output.
Where I'm breaking my brain is on trying to get the RH import to split 
off a new topic at each Level1 Head.
I've set the import (.isf) file to paginate on Heading1, but that does 
not seem to split the files as desired.

What am I missing?
(or do the FM files need to be split from chapters into 1-page topics 
separately?)


Thanks!
Grant
___


You are currently subscribed to framers as arch...@mail-archive.com.

Send list messages to framers@lists.frameusers.com.

To unsubscribe send a blank email to
framers-unsubscr...@lists.frameusers.com
or visit 
http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com

Send administrative questions to listad...@frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.

Ann: NEWS at tekom conference

[Georg Eck]

FrameMaker users,

 

we are proud to announce some really great features for Finalyser with
FrameMaker 10

+ Finalyser 0047

   + Background for objects - now as group

   + ExtendScript*): Change conditional in a book   

+ Finalyser TERM CHECK - Check your Terminology in FrameMaker

+ Finalyser CMS/DMS - with Adobe CRX and the Publishing Server 
   to generate REVERB and other mobile Output

 

Sample Output for mobile Devices:
Embedded 3D, Video and 3D-PDF: www.squidds.de/downloads/bihler

 

*) ExtendScript are for free for every monthly release

 

More Info:  www.finalyser.com

 

-  Georg

___


You are currently subscribed to framers as arch...@mail-archive.com.

Send list messages to framers@lists.frameusers.com.

To unsubscribe send a blank email to
framers-unsubscr...@lists.frameusers.com
or visit 
http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com

Send administrative questions to listad...@frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.