Re: [Framers] HTML5: FrameMaker creates only about 10 % of all graphics
Hi Art, Here is the info which Amitoj Singh sent me: Basically this new flag enables the new GDI based image creation for HTML5. Earlier we were using a different technology for the same which made it slow but with this flag enabled we use the new workflow for HTML5/Save as XML image generation. He also said that the quality of the graphics conversion is the same as before. Therefore you can safely set this option in your conversion projects to avoid any issues. Best regards Winfried -Original Message- From: Framers On Behalf Of Reng Winfried Sent: Monday, May 6, 2019 8:29 AM To: An email list for people using Adobe FrameMaker software. Subject: Re: [Framers] HTML5: FrameMaker creates only about 10 % of all graphics Hi Art, No. He did not give an explanation. I'll ask him. When he provided this fix, I was just glad that this worked. Winfried -Original Message- From: Framers On Behalf Of Art Campbell Sent: Friday, May 3, 2019 4:07 PM To: An email list for people using Adobe FrameMaker software. Subject: Re: [Framers] HTML5: FrameMaker creates only about 10 % of all graphics Reng, I think the question being asked now is why you had the problem and what the ini line fixes or changes Did Singh tell you? Art Campbell art.campb...@gmail.com "... In my opinion, there's nothing in this world beats a '52 Vincent and a redheaded girl." -- Richard Thompson No disclaimers apply. DoD 358 On Fri, May 3, 2019 at 7:26 AM Reng Winfried wrote: > Hi Caroline, > > Thank you very much for asking. All graphics are referenced. > Amitoj Singh from Adobe had already provided a solution. > In maker.ini in the Preferences section add this option: > GenerateBitmapWithGDI=ON > > When I converted again, all graphics were converted correctly! > Very simple and very fast fix! > I had already posted this to the Framers community. > > Best regards > > Winfried > > -Original Message- > From: Framers carecom-solutions@lists.frameusers.com> On Behalf Of Caroline > Tabach > Sent: Friday, May 3, 2019 12:58 PM > To: An email list for people using Adobe FrameMaker software. < > framers@lists.frameusers.com> > Subject: Re: [Framers] HTML5: FrameMaker creates only about 10 % of > all graphics > > Are the graphics copied, or imported by reference? > > Caroline Tabach > > On Fri, 3 May 2019, 12:43 Reng Winfried, > > wrote: > > > Hi, > > > > I have a rather large documentation which I want to convert to HTML5 > > (400 pages in PDF, 660 referenced vector EPS graphics). > > However, FrameMaker converts only about 10 % of all graphics > > correctly to JPG. > > All other graphics are converted to white rectangles. > > FrameMaker converts to real graphics up to a certain page, and from > > then on only white rectangles. > > The file names are correct; the graphics are pure white. > > There is no difference between the original graphics. All were > > created in the last years or months. > > > > In the Image settings the default format is JPG. (PNG is worse.) > > Reference page images are imported. > > Apart from this no changes to the default, no margins, no borders, > > no scaling. > > > > I already copied eveything to a local drive, restarted FrameMaker, > > restarted Windows, opened all files during the conversion. > > When I do not restart FrameMaker I get only white rectangles. > > When I restart FrameMaker and start the conversion, then the white > > rectangles always start with the same topic. > > On the network everything takes longer, but the white graphics start > > on the same topic. > > > > When I convert another document with about 300 pages and 300 JPG > > graphics, everything is fine. > > > > The only difference is that these graphics are already JPG. > > My PC is OK: i7, 16 GB RAM, 54 GB empty disc space. > > > > Can anyone help? > > > > Best regards > > > > Winfried ___ This message is from the Framers mailing list Send messages to framers@lists.frameusers.com Visit the list's homepage at http://www.frameusers.com Archives located at http://www.mail-archive.com/framers%40lists.frameusers.com/ Subscribe and unsubscribe at http://lists.frameusers.com/listinfo.cgi/framers-frameusers.com Send administrative questions to listad...@frameusers.com
Re: [Framers] HTML5: FrameMaker creates only about 10 % of all graphics
Thanks, Reng! Art Campbell art.campb...@gmail.com "... In my opinion, there's nothing in this world beats a '52 Vincent and a redheaded girl." -- Richard Thompson No disclaimers apply. DoD 358 On Mon, May 6, 2019 at 2:29 AM Reng Winfried wrote: > Hi Art, > > No. He did not give an explanation. I'll ask him. > When he provided this fix, I was just glad that this worked. > > Winfried > > -Original Message- > From: Framers carecom-solutions@lists.frameusers.com> On Behalf Of Art Campbell > Sent: Friday, May 3, 2019 4:07 PM > To: An email list for people using Adobe FrameMaker software. < > framers@lists.frameusers.com> > Subject: Re: [Framers] HTML5: FrameMaker creates only about 10 % of all > graphics > > Reng, > I think the question being asked now is why you had the problem and what > the ini line fixes or changes Did Singh tell you? > > Art Campbell > art.campb...@gmail.com > "... In my opinion, there's nothing in this world beats a '52 Vincent > and a redheaded girl." -- Richard Thompson > No disclaimers apply. >DoD 358 > > > > On Fri, May 3, 2019 at 7:26 AM Reng Winfried > > wrote: > > > Hi Caroline, > > > > Thank you very much for asking. All graphics are referenced. > > Amitoj Singh from Adobe had already provided a solution. > > In maker.ini in the Preferences section add this option: > > GenerateBitmapWithGDI=ON > > > > When I converted again, all graphics were converted correctly! > > Very simple and very fast fix! > > I had already posted this to the Framers community. > > > > Best regards > > > > Winfried > > > > -Original Message- > > From: Framers > carecom-solutions....@lists.frameusers.com> On Behalf Of Caroline > > Tabach > > Sent: Friday, May 3, 2019 12:58 PM > > To: An email list for people using Adobe FrameMaker software. < > > framers@lists.frameusers.com> > > Subject: Re: [Framers] HTML5: FrameMaker creates only about 10 % of > > all graphics > > > > Are the graphics copied, or imported by reference? > > > > Caroline Tabach > > > > On Fri, 3 May 2019, 12:43 Reng Winfried, > > > > wrote: > > > > > Hi, > > > > > > I have a rather large documentation which I want to convert to HTML5 > > > (400 pages in PDF, 660 referenced vector EPS graphics). > > > However, FrameMaker converts only about 10 % of all graphics > > > correctly to JPG. > > > All other graphics are converted to white rectangles. > > > FrameMaker converts to real graphics up to a certain page, and from > > > then on only white rectangles. > > > The file names are correct; the graphics are pure white. > > > There is no difference between the original graphics. All were > > > created in the last years or months. > > > > > > In the Image settings the default format is JPG. (PNG is worse.) > > > Reference page images are imported. > > > Apart from this no changes to the default, no margins, no borders, > > > no scaling. > > > > > > I already copied eveything to a local drive, restarted FrameMaker, > > > restarted Windows, opened all files during the conversion. > > > When I do not restart FrameMaker I get only white rectangles. > > > When I restart FrameMaker and start the conversion, then the white > > > rectangles always start with the same topic. > > > On the network everything takes longer, but the white graphics start > > > on the same topic. > > > > > > When I convert another document with about 300 pages and 300 JPG > > > graphics, everything is fine. > > > > > > The only difference is that these graphics are already JPG. > > > My PC is OK: i7, 16 GB RAM, 54 GB empty disc space. > > > > > > Can anyone help? > > > > > > Best regards > > > > > > Winfried > ___ > > This message is from the Framers mailing list > > Send messages to framers@lists.frameusers.com > Visit the list's homepage at http://www.frameusers.com > Archives located at > http://www.mail-archive.com/framers%40lists.frameusers.com/ > Subscribe and unsubscribe at > http://lists.frameusers.com/listinfo.cgi/framers-frameusers.com > Send administrative questions to listad...@frameusers.com > ___ This message is from the Framers mailing list Send messages to framers@lists.frameusers.com Visit the list's homepage at http://www.frameusers.com Archives located at http://www.mail-archive.com/framers%40lists.frameusers.com/ Subscribe and unsubscribe at http://lists.frameusers.com/listinfo.cgi/framers-frameusers.com Send administrative questions to listad...@frameusers.com
Re: [Framers] HTML5: FrameMaker creates only about 10 % of all graphics
Hi Art, No. He did not give an explanation. I'll ask him. When he provided this fix, I was just glad that this worked. Winfried -Original Message- From: Framers On Behalf Of Art Campbell Sent: Friday, May 3, 2019 4:07 PM To: An email list for people using Adobe FrameMaker software. Subject: Re: [Framers] HTML5: FrameMaker creates only about 10 % of all graphics Reng, I think the question being asked now is why you had the problem and what the ini line fixes or changes Did Singh tell you? Art Campbell art.campb...@gmail.com "... In my opinion, there's nothing in this world beats a '52 Vincent and a redheaded girl." -- Richard Thompson No disclaimers apply. DoD 358 On Fri, May 3, 2019 at 7:26 AM Reng Winfried wrote: > Hi Caroline, > > Thank you very much for asking. All graphics are referenced. > Amitoj Singh from Adobe had already provided a solution. > In maker.ini in the Preferences section add this option: > GenerateBitmapWithGDI=ON > > When I converted again, all graphics were converted correctly! > Very simple and very fast fix! > I had already posted this to the Framers community. > > Best regards > > Winfried > > -Original Message- > From: Framers carecom-solutions@lists.frameusers.com> On Behalf Of Caroline > Tabach > Sent: Friday, May 3, 2019 12:58 PM > To: An email list for people using Adobe FrameMaker software. < > framers@lists.frameusers.com> > Subject: Re: [Framers] HTML5: FrameMaker creates only about 10 % of > all graphics > > Are the graphics copied, or imported by reference? > > Caroline Tabach > > On Fri, 3 May 2019, 12:43 Reng Winfried, > > wrote: > > > Hi, > > > > I have a rather large documentation which I want to convert to HTML5 > > (400 pages in PDF, 660 referenced vector EPS graphics). > > However, FrameMaker converts only about 10 % of all graphics > > correctly to JPG. > > All other graphics are converted to white rectangles. > > FrameMaker converts to real graphics up to a certain page, and from > > then on only white rectangles. > > The file names are correct; the graphics are pure white. > > There is no difference between the original graphics. All were > > created in the last years or months. > > > > In the Image settings the default format is JPG. (PNG is worse.) > > Reference page images are imported. > > Apart from this no changes to the default, no margins, no borders, > > no scaling. > > > > I already copied eveything to a local drive, restarted FrameMaker, > > restarted Windows, opened all files during the conversion. > > When I do not restart FrameMaker I get only white rectangles. > > When I restart FrameMaker and start the conversion, then the white > > rectangles always start with the same topic. > > On the network everything takes longer, but the white graphics start > > on the same topic. > > > > When I convert another document with about 300 pages and 300 JPG > > graphics, everything is fine. > > > > The only difference is that these graphics are already JPG. > > My PC is OK: i7, 16 GB RAM, 54 GB empty disc space. > > > > Can anyone help? > > > > Best regards > > > > Winfried ___ This message is from the Framers mailing list Send messages to framers@lists.frameusers.com Visit the list's homepage at http://www.frameusers.com Archives located at http://www.mail-archive.com/framers%40lists.frameusers.com/ Subscribe and unsubscribe at http://lists.frameusers.com/listinfo.cgi/framers-frameusers.com Send administrative questions to listad...@frameusers.com
Re: [Framers] HTML5: FrameMaker creates only about 10 % of all graphics
Reng, I think the question being asked now is why you had the problem and what the ini line fixes or changes Did Singh tell you? Art Campbell art.campb...@gmail.com "... In my opinion, there's nothing in this world beats a '52 Vincent and a redheaded girl." -- Richard Thompson No disclaimers apply. DoD 358 On Fri, May 3, 2019 at 7:26 AM Reng Winfried wrote: > Hi Caroline, > > Thank you very much for asking. All graphics are referenced. > Amitoj Singh from Adobe had already provided a solution. > In maker.ini in the Preferences section add this option: > GenerateBitmapWithGDI=ON > > When I converted again, all graphics were converted correctly! > Very simple and very fast fix! > I had already posted this to the Framers community. > > Best regards > > Winfried > > -Original Message- > From: Framers carecom-solutions@lists.frameusers.com> On Behalf Of Caroline Tabach > Sent: Friday, May 3, 2019 12:58 PM > To: An email list for people using Adobe FrameMaker software. < > framers@lists.frameusers.com> > Subject: Re: [Framers] HTML5: FrameMaker creates only about 10 % of all > graphics > > Are the graphics copied, or imported by reference? > > Caroline Tabach > > On Fri, 3 May 2019, 12:43 Reng Winfried, > wrote: > > > Hi, > > > > I have a rather large documentation which I want to convert to HTML5 > > (400 pages in PDF, 660 referenced vector EPS graphics). > > However, FrameMaker converts only about 10 % of all graphics correctly > > to JPG. > > All other graphics are converted to white rectangles. > > FrameMaker converts to real graphics up to a certain page, and from > > then on only white rectangles. > > The file names are correct; the graphics are pure white. > > There is no difference between the original graphics. All were created > > in the last years or months. > > > > In the Image settings the default format is JPG. (PNG is worse.) > > Reference page images are imported. > > Apart from this no changes to the default, no margins, no borders, no > > scaling. > > > > I already copied eveything to a local drive, restarted FrameMaker, > > restarted Windows, opened all files during the conversion. > > When I do not restart FrameMaker I get only white rectangles. > > When I restart FrameMaker and start the conversion, then the white > > rectangles always start with the same topic. > > On the network everything takes longer, but the white graphics start > > on the same topic. > > > > When I convert another document with about 300 pages and 300 JPG > > graphics, everything is fine. > > > > The only difference is that these graphics are already JPG. > > My PC is OK: i7, 16 GB RAM, 54 GB empty disc space. > > > > Can anyone help? > > > > Best regards > > > > Winfried > ___ > > This message is from the Framers mailing list > > Send messages to framers@lists.frameusers.com > Visit the list's homepage at http://www.frameusers.com > Archives located at > http://www.mail-archive.com/framers%40lists.frameusers.com/ > Subscribe and unsubscribe at > http://lists.frameusers.com/listinfo.cgi/framers-frameusers.com > Send administrative questions to listad...@frameusers.com > ___ This message is from the Framers mailing list Send messages to framers@lists.frameusers.com Visit the list's homepage at http://www.frameusers.com Archives located at http://www.mail-archive.com/framers%40lists.frameusers.com/ Subscribe and unsubscribe at http://lists.frameusers.com/listinfo.cgi/framers-frameusers.com Send administrative questions to listad...@frameusers.com
Re: [Framers] HTML5: FrameMaker creates only about 10 % of all graphics
Hi Caroline, Thank you very much for asking. All graphics are referenced. Amitoj Singh from Adobe had already provided a solution. In maker.ini in the Preferences section add this option: GenerateBitmapWithGDI=ON When I converted again, all graphics were converted correctly! Very simple and very fast fix! I had already posted this to the Framers community. Best regards Winfried -Original Message- From: Framers On Behalf Of Caroline Tabach Sent: Friday, May 3, 2019 12:58 PM To: An email list for people using Adobe FrameMaker software. Subject: Re: [Framers] HTML5: FrameMaker creates only about 10 % of all graphics Are the graphics copied, or imported by reference? Caroline Tabach On Fri, 3 May 2019, 12:43 Reng Winfried, wrote: > Hi, > > I have a rather large documentation which I want to convert to HTML5 > (400 pages in PDF, 660 referenced vector EPS graphics). > However, FrameMaker converts only about 10 % of all graphics correctly > to JPG. > All other graphics are converted to white rectangles. > FrameMaker converts to real graphics up to a certain page, and from > then on only white rectangles. > The file names are correct; the graphics are pure white. > There is no difference between the original graphics. All were created > in the last years or months. > > In the Image settings the default format is JPG. (PNG is worse.) > Reference page images are imported. > Apart from this no changes to the default, no margins, no borders, no > scaling. > > I already copied eveything to a local drive, restarted FrameMaker, > restarted Windows, opened all files during the conversion. > When I do not restart FrameMaker I get only white rectangles. > When I restart FrameMaker and start the conversion, then the white > rectangles always start with the same topic. > On the network everything takes longer, but the white graphics start > on the same topic. > > When I convert another document with about 300 pages and 300 JPG > graphics, everything is fine. > > The only difference is that these graphics are already JPG. > My PC is OK: i7, 16 GB RAM, 54 GB empty disc space. > > Can anyone help? > > Best regards > > Winfried ___ This message is from the Framers mailing list Send messages to framers@lists.frameusers.com Visit the list's homepage at http://www.frameusers.com Archives located at http://www.mail-archive.com/framers%40lists.frameusers.com/ Subscribe and unsubscribe at http://lists.frameusers.com/listinfo.cgi/framers-frameusers.com Send administrative questions to listad...@frameusers.com
Re: [Framers] HTML5: FrameMaker creates only about 10 % of all graphics
Are the graphics copied, or imported by reference? Caroline Tabach On Fri, 3 May 2019, 12:43 Reng Winfried, wrote: > Hi, > > I have a rather large documentation which I want to convert to HTML5 (400 > pages in PDF, 660 referenced vector EPS graphics). > However, FrameMaker converts only about 10 % of all graphics correctly to > JPG. > All other graphics are converted to white rectangles. > FrameMaker converts to real graphics up to a certain page, and from then > on only white rectangles. > The file names are correct; the graphics are pure white. > There is no difference between the original graphics. All were created in > the last years or months. > > In the Image settings the default format is JPG. (PNG is worse.) > Reference page images are imported. > Apart from this no changes to the default, no margins, no borders, no > scaling. > > I already copied eveything to a local drive, restarted FrameMaker, > restarted Windows, opened all files during the conversion. > When I do not restart FrameMaker I get only white rectangles. > When I restart FrameMaker and start the conversion, then the white > rectangles always start with the same topic. > On the network everything takes longer, but the white graphics start on > the same topic. > > When I convert another document with about 300 pages and 300 JPG graphics, > everything is fine. > > The only difference is that these graphics are already JPG. > My PC is OK: i7, 16 GB RAM, 54 GB empty disc space. > > Can anyone help? > > Best regards > > Winfried > ___ > > This message is from the Framers mailing list > > Send messages to framers@lists.frameusers.com > Visit the list's homepage at http://www.frameusers.com > Archives located at > http://www.mail-archive.com/framers%40lists.frameusers.com/ > Subscribe and unsubscribe at > http://lists.frameusers.com/listinfo.cgi/framers-frameusers.com > Send administrative questions to listad...@frameusers.com > ___ This message is from the Framers mailing list Send messages to framers@lists.frameusers.com Visit the list's homepage at http://www.frameusers.com Archives located at http://www.mail-archive.com/framers%40lists.frameusers.com/ Subscribe and unsubscribe at http://lists.frameusers.com/listinfo.cgi/framers-frameusers.com Send administrative questions to listad...@frameusers.com
Re: [Framers] HTML5: FrameMaker creates only about 10 % of all graphics
Hi, Amitoj Singh from Adobe provided the solution. Add GenerateBitmapWithGDI=ON in maker.ini in the Preferences section. This helped. Everything is converted correctly now. Perfect! Best regards Winfried -Original Message- From: Framers On Behalf Of Reng Winfried Sent: Friday, May 3, 2019 11:43 AM To: framers@lists.frameusers.com Subject: [Framers] HTML5: FrameMaker creates only about 10 % of all graphics Hi, I have a rather large documentation which I want to convert to HTML5 (400 pages in PDF, 660 referenced vector EPS graphics). However, FrameMaker converts only about 10 % of all graphics correctly to JPG. All other graphics are converted to white rectangles. FrameMaker converts to real graphics up to a certain page, and from then on only white rectangles. The file names are correct; the graphics are pure white. There is no difference between the original graphics. All were created in the last years or months. In the Image settings the default format is JPG. (PNG is worse.) Reference page images are imported. Apart from this no changes to the default, no margins, no borders, no scaling. I already copied eveything to a local drive, restarted FrameMaker, restarted Windows, opened all files during the conversion. When I do not restart FrameMaker I get only white rectangles. When I restart FrameMaker and start the conversion, then the white rectangles always start with the same topic. On the network everything takes longer, but the white graphics start on the same topic. When I convert another document with about 300 pages and 300 JPG graphics, everything is fine. The only difference is that these graphics are already JPG. My PC is OK: i7, 16 GB RAM, 54 GB empty disc space. Can anyone help? Best regards Winfried ___ This message is from the Framers mailing list Send messages to framers@lists.frameusers.com Visit the list's homepage at http://www.frameusers.com Archives located at http://www.mail-archive.com/framers%40lists.frameusers.com/ Subscribe and unsubscribe at http://lists.frameusers.com/listinfo.cgi/framers-frameusers.com Send administrative questions to listad...@frameusers.com
[Framers] HTML5: FrameMaker creates only about 10 % of all graphics
Hi, I have a rather large documentation which I want to convert to HTML5 (400 pages in PDF, 660 referenced vector EPS graphics). However, FrameMaker converts only about 10 % of all graphics correctly to JPG. All other graphics are converted to white rectangles. FrameMaker converts to real graphics up to a certain page, and from then on only white rectangles. The file names are correct; the graphics are pure white. There is no difference between the original graphics. All were created in the last years or months. In the Image settings the default format is JPG. (PNG is worse.) Reference page images are imported. Apart from this no changes to the default, no margins, no borders, no scaling. I already copied eveything to a local drive, restarted FrameMaker, restarted Windows, opened all files during the conversion. When I do not restart FrameMaker I get only white rectangles. When I restart FrameMaker and start the conversion, then the white rectangles always start with the same topic. On the network everything takes longer, but the white graphics start on the same topic. When I convert another document with about 300 pages and 300 JPG graphics, everything is fine. The only difference is that these graphics are already JPG. My PC is OK: i7, 16 GB RAM, 54 GB empty disc space. Can anyone help? Best regards Winfried ___ This message is from the Framers mailing list Send messages to framers@lists.frameusers.com Visit the list's homepage at http://www.frameusers.com Archives located at http://www.mail-archive.com/framers%40lists.frameusers.com/ Subscribe and unsubscribe at http://lists.frameusers.com/listinfo.cgi/framers-frameusers.com Send administrative questions to listad...@frameusers.com
