Re: FW: FM10 - font error

[Stuart Rogers]

On 19/10/2012 10:06 PM, William W. Saylor, PE wrote:


*From:*William W. Saylor, PE [mailto:wsay...@earthlink.net]
*Sent:* Friday, October 19, 2012 6:05 PM
*To:* 'fram...@lists.framerusers.com'
*Subject:* FM10 - font error

I am using FM10 on a book project and have inherited some older (FM7?) 
files that were exchanged using the .mif format. Somewhere there must 
be a “Times” font called out, which is no longer available. When I 
open a single chapter there is no problem – just an error message 
saying Times New Roman is used instead. However, when I put the 
chapters in a book and use the documentformattingnumber command to 
set each chapter I get an error that FM10 can do nothing because of 
the previous error.





Apart from what others have said, you are probably getting the error in 
the book window because not all your chapter files are open when you 
give the numbering command.  In order to format the numbering, FM must 
open each closed file, which it tries to do 'silently' (without 
presenting you with any error messages). If you first open all the files 
in the book and deal with each font warning as it arises, you should be 
able to format the numbering from the book window without further 
problems.  If you change your Preferences to not remember missing font 
names, you can deal with the error messages for the last time by opening 
the files, acknowledging the font warnings, then saving the files.


HTH,

--
Stuart Rogers
Technical Communicator
Phoenix Geophysics Limited
3781 Victoria Park Avenue, Unit 3
Toronto, ON, Canada  M1W 3K5
+1 (416) 491-7340 x 325

http://www.phoenix-geophysics.com

___


You are currently subscribed to framers as arch...@mail-archive.com.

Send list messages to framers@lists.frameusers.com.

To unsubscribe send a blank email to
framers-unsubscr...@lists.frameusers.com
or visit 
http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com

Send administrative questions to listad...@frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.

FW: FM10 - font error

[Stuart Rogers]

On 19/10/2012 10:06 PM, William W. Saylor, PE wrote:
>
> *From:*William W. Saylor, PE [mailto:wsaylor at earthlink.net]
> *Sent:* Friday, October 19, 2012 6:05 PM
> *To:* 'framers at lists.framerusers.com'
> *Subject:* FM10 - font error
>
> I am using FM10 on a book project and have inherited some older (FM7?) 
> files that were exchanged using the .mif format. Somewhere there must 
> be a ?Times? font called out, which is no longer available. When I 
> open a single chapter there is no problem ? just an error message 
> saying Times New Roman is used instead. However, when I put the 
> chapters in a book and use the document>formatting>number command to 
> set each chapter I get an error that FM10 can do nothing because of 
> the previous error.
>
>

Apart from what others have said, you are probably getting the error in 
the book window because not all your chapter files are open when you 
give the numbering command.  In order to format the numbering, FM must 
open each closed file, which it tries to do 'silently' (without 
presenting you with any error messages). If you first open all the files 
in the book and deal with each font warning as it arises, you should be 
able to format the numbering from the book window without further 
problems.  If you change your Preferences to not remember missing font 
names, you can deal with the error messages for the last time by opening 
the files, acknowledging the font warnings, then saving the files.

HTH,

-- 
Stuart Rogers
Technical Communicator
Phoenix Geophysics Limited
3781 Victoria Park Avenue, Unit 3
Toronto, ON, Canada  M1W 3K5
+1 (416) 491-7340 x 325

http://www.phoenix-geophysics.com

-- next part --
An HTML attachment was scrubbed...
URL: 

Re: FW: FM10 - font error

[Kenneth C. Benson]

If you have to deal with the missing font, you have two choices: load 
the font, or find the font usage and change it.


Missing font usages can lurk in such unsuspected places as a deleted 
paragraph format in a table header cell with the table header turned 
off. These can be very difficult to find in the binary fm file. For 
instance, you could go through every table, turn the table header on, 
type some copy in each cell, and see if it exposes some old paragraph 
format usages you thought you'd gotten rid of many years ago. These are 
easy to find in MIF, though. Export to MIF, open in Notepad, search for 
Times, replace with the font of your choice.


Kenneth Benson
Pegasus Type
www.pegtype.com

On 10/19/2012 10:06 PM, William W. Saylor, PE wrote:


*From:*William W. Saylor, PE [mailto:wsay...@earthlink.net]
*Sent:* Friday, October 19, 2012 6:05 PM
*To:* 'fram...@lists.framerusers.com'
*Subject:* FM10 - font error

I am using FM10 on a book project and have inherited some older (FM7?) 
files that were exchanged using the .mif format. Somewhere there must 
be a Times font called out, which is no longer available. When I 
open a single chapter there is no problem -- just an error message 
saying Times New Roman is used instead. However, when I put the 
chapters in a book and use the documentformattingnumber command to 
set each chapter I get an error that FM10 can do nothing because of 
the previous error.


I have searched the document, all tags etc. and can find no reference 
to or use of Times. Any suggestions?


Thanks,

Bill



*/Saylor Solutions, Inc./*

William W. Saylor, PE(v) 719 481-0433

20075 Promontory Way   (mob) 719 373-3770

Monument, CO 80132

wsay...@earthlink.net mailto:wsay...@earthlink.net



___


You are currently subscribed to framers as kben...@pegtype.com.

Send list messages to framers@lists.frameusers.com.

To unsubscribe send a blank email to
framers-unsubscr...@lists.frameusers.com
or visit 
http://lists.frameusers.com/mailman/options/framers/kbenson%40pegtype.com

Send administrative questions to listad...@frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.


___


You are currently subscribed to framers as arch...@mail-archive.com.

Send list messages to framers@lists.frameusers.com.

To unsubscribe send a blank email to
framers-unsubscr...@lists.frameusers.com
or visit 
http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com

Send administrative questions to listad...@frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.

Re: FW: FM10 - font error

[Mike Wickham]

Since you have FM10, you can use the Replace Fonts feature. Simply open 
the Fonts pod, then click on the Replace button to open the Replace 
Fonts pod. (There may be a way to open that pod directly, but I couldn't 
find it.) The Replace Fonts pod will let you specify Times Roman (or 
other font) as a permanent replacement for Times. Save the document.


Mike Wickham


___


You are currently subscribed to framers as arch...@mail-archive.com.

Send list messages to framers@lists.frameusers.com.

To unsubscribe send a blank email to
framers-unsubscr...@lists.frameusers.com
or visit 
http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com

Send administrative questions to listad...@frameusers.com. Visit
http://www.frameusers.com/ for more resources and info.

FW: FM10 - font error

[Kenneth C. Benson]

If you have to deal with the missing font, you have two choices: load 
the font, or find the font usage and change it.

Missing font usages can lurk in such unsuspected places as a deleted 
paragraph format in a table header cell with the table header turned 
off. These can be very difficult to find in the binary fm file. For 
instance, you could go through every table, turn the table header on, 
type some copy in each cell, and see if it exposes some old paragraph 
format usages you thought you'd gotten rid of many years ago. These are 
easy to find in MIF, though. Export to MIF, open in Notepad, search for 
Times, replace with the font of your choice.

Kenneth Benson
Pegasus Type
www.pegtype.com

On 10/19/2012 10:06 PM, William W. Saylor, PE wrote:
>
> *From:*William W. Saylor, PE [mailto:wsaylor at earthlink.net]
> *Sent:* Friday, October 19, 2012 6:05 PM
> *To:* 'framers at lists.framerusers.com'
> *Subject:* FM10 - font error
>
> I am using FM10 on a book project and have inherited some older (FM7?) 
> files that were exchanged using the .mif format. Somewhere there must 
> be a "Times" font called out, which is no longer available. When I 
> open a single chapter there is no problem -- just an error message 
> saying Times New Roman is used instead. However, when I put the 
> chapters in a book and use the document>formatting>number command to 
> set each chapter I get an error that FM10 can do nothing because of 
> the previous error.
>
> I have searched the document, all tags etc. and can find no reference 
> to or use of Times. Any suggestions?
>
> Thanks,
>
> Bill
>
> 
>
> */Saylor Solutions, Inc./*
>
> William W. Saylor, PE(v) 719 481-0433
>
> 20075 Promontory Way   (mob) 719 373-3770
>
> Monument, CO 80132
>
> wsaylor at earthlink.net 
>
>
>
> ___
>
>
> You are currently subscribed to framers as kbenson at pegtype.com.
>
> Send list messages to framers at lists.frameusers.com.
>
> To unsubscribe send a blank email to
> framers-unsubscribe at lists.frameusers.com
> or visit 
> http://lists.frameusers.com/mailman/options/framers/kbenson%40pegtype.com
>
> Send administrative questions to listadmin at frameusers.com. Visit
> http://www.frameusers.com/ for more resources and info.

-- next part --
An HTML attachment was scrubbed...
URL: 

FW: FM10 - font error

[Mike Wickham]

Since you have FM10, you can use the Replace Fonts feature. Simply open 
the Fonts pod, then click on the Replace button to open the Replace 
Fonts pod. (There may be a way to open that pod directly, but I couldn't 
find it.) The Replace Fonts pod will let you specify Times Roman (or 
other font) as a permanent replacement for Times. Save the document.

Mike Wickham

FW: FM10 - font error

[William W. Saylor, PE]

From: William W. Saylor, PE [mailto:wsay...@earthlink.net] 
Sent: Friday, October 19, 2012 6:05 PM
To: 'framers at lists.framerusers.com'
Subject: FM10 - font error



I am using FM10 on a book project and have inherited some older (FM7?) files
that were exchanged using the .mif format. Somewhere there must be a "Times"
font called out, which is no longer available. When I open a single chapter
there is no problem - just an error message saying Times New Roman is used
instead. However, when I put the chapters in a book and use the
document>formatting>number command to set each chapter I get an error that
FM10 can do nothing because of the previous error.



I have searched the document, all tags etc. and can find no reference to or
use of Times. Any suggestions?

Thanks,

Bill





Saylor Solutions, Inc.

William W. Saylor, PE(v) 719 481-0433

20075 Promontory Way   (mob) 719 373-3770

Monument, CO 80132  

wsaylor at earthlink.net



-- next part --
An HTML attachment was scrubbed...
URL: