How to enter Unicode Character in FrameMaker 10?
On Fri, 26 Aug 2011 11:36:16 -0700, Karen Robbins wrote: >I have been struggling with this in FM9. My document has a >Symbol-font arrow that goes wonky when I convert to PDF. I have tried >several tools and suggestions, including the FM hex input palette, to >enter the proper code, but none work--I just get a question mark in >place of the arrow. I am not skilled enough in Windows (7) to modify >a registry (Mac person here). Any help for the Windows-impaired? Sounds like maybe the font you are using does not have a glyph for the code point. Try changing the font to Arial Unicode MS, which does have that glyph, and see if the symbol appears then. (You could change the font just for the one char, with a Character Format.) -- Jeremy H. Griffith, at Omni Systems Inc. http://www.omsys.com/
Re: How to enter Unicode Character in FrameMaker 10?
On Fri, 26 Aug 2011 11:36:16 -0700, Karen Robbins wrote: >I have been struggling with this in FM9. My document has a >Symbol-font arrow that goes wonky when I convert to PDF. I have tried >several tools and suggestions, including the FM hex input palette, to >enter the proper code, but none work--I just get a question mark in >place of the arrow. I am not skilled enough in Windows (7) to modify >a registry (Mac person here). Any help for the Windows-impaired? Sounds like maybe the font you are using does not have a glyph for the code point. Try changing the font to Arial Unicode MS, which does have that glyph, and see if the symbol appears then. (You could change the font just for the one char, with a Character Format.) -- Jeremy H. Griffith, at Omni Systems Inc. http://www.omsys.com/ ___ You are currently subscribed to framers as arch...@mail-archive.com. Send list messages to framers@lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscr...@lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to listad...@frameusers.com. Visit http://www.frameusers.com/ for more resources and info.
How to enter Unicode Character in FrameMaker 10?
On Thu, 25 Aug 2011 13:43:52 +0100, "Ian Proudfoot" wrote: >FrameMaker does have the Hex Input palette where you can type the hex value >of any unicode character. It's a lot more compact than the character >palette. You can find it here: File > Utilities > Hex Input... or Alt + f u >i. Interesting, thanks! It seems to have been added in FM9; it's not present in Frame 8. And if you are wondering how to make the Character Palette go away, since it has no close box or button, just hit Esc. ;-) -- Jeremy H. Griffith, at Omni Systems Inc. http://www.omsys.com/
Re: How to enter Unicode Character in FrameMaker 10?
Hello Framers, I have been struggling with this in FM9. My document has a Symbol-font arrow that goes wonky when I convert to PDF. I have tried several tools and suggestions, including the FM hex input palette, to enter the proper code, but none work--I just get a question mark in place of the arrow. I am not skilled enough in Windows (7) to modify a registry (Mac person here). Any help for the Windows-impaired? Thanks, Karen Robbins ___ You are currently subscribed to framers as arch...@mail-archive.com. Send list messages to framers@lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscr...@lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to listad...@frameusers.com. Visit http://www.frameusers.com/ for more resources and info.
How to enter Unicode Character in FrameMaker 10?
Hello Framers, I have been struggling with this in FM9. My document has a Symbol-font arrow that goes wonky when I convert to PDF. I have tried several tools and suggestions, including the FM hex input palette, to enter the proper code, but none work--I just get a question mark in place of the arrow. I am not skilled enough in Windows (7) to modify a registry (Mac person here). Any help for the Windows-impaired? Thanks, Karen Robbins
Re: How to enter Unicode Character in FrameMaker 10?
On Thu, 25 Aug 2011 13:43:52 +0100, "Ian Proudfoot" wrote: >FrameMaker does have the Hex Input palette where you can type the hex value >of any unicode character. It's a lot more compact than the character >palette. You can find it here: File > Utilities > Hex Input... or Alt + f u >i. Interesting, thanks! It seems to have been added in FM9; it's not present in Frame 8. And if you are wondering how to make the Character Palette go away, since it has no close box or button, just hit Esc. ;-) -- Jeremy H. Griffith, at Omni Systems Inc. http://www.omsys.com/ ___ You are currently subscribed to framers as arch...@mail-archive.com. Send list messages to framers@lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscr...@lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to listad...@frameusers.com. Visit http://www.frameusers.com/ for more resources and info.
RE: How to enter Unicode Character in FrameMaker 10?
I didn't know this! Thanks for sharing, Ian. You helped me too. And it IS a lot more compact than the character palette. Bethany Lee Technical Editor Lake Shore Cryotronics -Original Message- From: framers-boun...@lists.frameusers.com [mailto:framers-boun...@lists.frameusers.com] On Behalf Of Ian Proudfoot Sent: Thursday, August 25, 2011 8:44 AM To: 'Nancy Allison'; framers@lists.frameusers.com Subject: RE: How to enter Unicode Character in FrameMaker 10? Hi Nancy, FrameMaker does have the Hex Input palette where you can type the hex value of any unicode character. It's a lot more compact than the character palette. You can find it here: File > Utilities > Hex Input... or Alt + f u i. Ian Ian Proudfoot iTP-X Adobe Community Professional -Original Message- From: framers-boun...@lists.frameusers.com [mailto:framers-boun...@lists.frameusers.com] On Behalf Of Nancy Allison Sent: 24 August 2011 17:01 To: framers@lists.frameusers.com Subject: How to enter Unicode Character in FrameMaker 10? Hi, everyone. I'm using FrameMaker 10 on a Windows 7 system. I currently create a right arrow in my Frame documents by typing the ASCII registered trademark and applying the Symbol font. When I convert the file to HTML, the Symbol font drops out and it reverts to the trademark character. I am assuming that using the Unicode character will solve this problem. (first question: do you agree?) Here's a writeup of the character: http://www.fileformat.info/info/unicode/char/2192/index.htm Which of these cryptic codes to I use to get the character into my text? HOW do I enter the code to do this? Thanks! ___ You are currently subscribed to framers as ian.proudf...@itp-x.co.uk. Send list messages to framers@lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscr...@lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/ian.proudfoot%40itp-x.co .uk Send administrative questions to listad...@frameusers.com. Visit http://www.frameusers.com/ for more resources and info. ___ You are currently subscribed to framers as bethany@lakeshore.com. Send list messages to framers@lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscr...@lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/bethany.lee%40lakeshore.com Send administrative questions to listad...@frameusers.com. Visit http://www.frameusers.com/ for more resources and info. ___ You are currently subscribed to framers as arch...@mail-archive.com. Send list messages to framers@lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscr...@lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to listad...@frameusers.com. Visit http://www.frameusers.com/ for more resources and info.
How to enter Unicode Character in FrameMaker 10?
It still works in Windows 7. Mike Wickham On 8/25/2011 4:00 AM, Simon BUCH wrote: > There is a Windows input method to 'type' Unicode characters, using the > numeric pad to type the unicode hex number. > > Steps required: > 1. You'll need to enable the Windows 'hex numpad' option. > As there's no user interface option for this [AFAIK], you'll need to > modify the Windows registry: > 1a. Click Start> Run and launch the registry editor: RegEdit.exe > 1b. Navigate to [HKEY_CURRENT_USER\Control Panel\Input Method] > 1c. Locate the key named "EnableHexNumpad". > If there isn't one, use the right mouse menu to create a new > string value with the type REG_SZ > 1d. Double-click the EnableHexNumpad key to give it a value of 1 > 1e. Close RegEdit. > > 2. Reboot. Because it's Windows. > > 3. Log back in, and then you can then start inserting Unicode characters > - if you know their hex code. > For example: Hold down your Left-Alt key, and then on the numeric pad: > press + > press 2 > press 1 > press 9 > press 2 > and then release the Alt key. You will how have a right-arrow. > Hex a to f is done using your main keyboard. > > NOTE: I'm not certain if this still works in Windows 7, but knowing > Microsoft they'll still support it in the same way that you can't have > specific file names, such as: con.doc ; prn.txt ; aux.html etc. still! > > > By reading the Wikipedia page: > http://en.wikipedia.org/wiki/Unicode_input#In_Microsoft_Windows > ... I discovered that Microsoft have a 'RichEdit' mode in some > applications, which will allow a user to type a number, followed by > Alt+x - but it appears that Adobe / FrameMaker do not support that. > > > Regards > // Simon BUCH -- M-AIS eAIP consultant > > > > > ___ > > > You are currently subscribed to framers as info at mikewickham.com. > > Send list messages to framers at lists.frameusers.com. > > To unsubscribe send a blank email to > framers-unsubscribe at lists.frameusers.com > or visit > http://lists.frameusers.com/mailman/options/framers/info%40mikewickham.com > > Send administrative questions to listadmin at frameusers.com. Visit > http://www.frameusers.com/ for more resources and info. > > >
Re: How to enter Unicode Character in FrameMaker 10?
It still works in Windows 7. Mike Wickham On 8/25/2011 4:00 AM, Simon BUCH wrote: There is a Windows input method to 'type' Unicode characters, using the numeric pad to type the unicode hex number. Steps required: 1. You'll need to enable the Windows 'hex numpad' option. As there's no user interface option for this [AFAIK], you'll need to modify the Windows registry: 1a. Click Start> Run and launch the registry editor: RegEdit.exe 1b. Navigate to [HKEY_CURRENT_USER\Control Panel\Input Method] 1c. Locate the key named "EnableHexNumpad". If there isn't one, use the right mouse menu to create a new string value with the type REG_SZ 1d. Double-click the EnableHexNumpad key to give it a value of 1 1e. Close RegEdit. 2. Reboot. Because it's Windows. 3. Log back in, and then you can then start inserting Unicode characters - if you know their hex code. For example: Hold down your Left-Alt key, and then on the numeric pad: press + press 2 press 1 press 9 press 2 and then release the Alt key. You will how have a right-arrow. Hex a to f is done using your main keyboard. NOTE: I'm not certain if this still works in Windows 7, but knowing Microsoft they'll still support it in the same way that you can't have specific file names, such as: con.doc ; prn.txt ; aux.html etc. still! By reading the Wikipedia page: http://en.wikipedia.org/wiki/Unicode_input#In_Microsoft_Windows ... I discovered that Microsoft have a 'RichEdit' mode in some applications, which will allow a user to type a number, followed by Alt+x - but it appears that Adobe / FrameMaker do not support that. Regards // Simon BUCH -- M-AIS eAIP consultant ___ You are currently subscribed to framers as i...@mikewickham.com. Send list messages to framers@lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscr...@lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/info%40mikewickham.com Send administrative questions to listad...@frameusers.com. Visit http://www.frameusers.com/ for more resources and info. ___ You are currently subscribed to framers as arch...@mail-archive.com. Send list messages to framers@lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscr...@lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to listad...@frameusers.com. Visit http://www.frameusers.com/ for more resources and info.
How to enter Unicode Character in FrameMaker 10?
I didn't know this! Thanks for sharing, Ian. You helped me too. And it IS a lot more compact than the character palette. Bethany Lee Technical Editor Lake Shore Cryotronics -Original Message- From: framers-bounces at lists.frameusers.com [mailto:framers-boun...@lists.frameusers.com] On Behalf Of Ian Proudfoot Sent: Thursday, August 25, 2011 8:44 AM To: 'Nancy Allison'; framers at lists.frameusers.com Subject: RE: How to enter Unicode Character in FrameMaker 10? Hi Nancy, FrameMaker does have the Hex Input palette where you can type the hex value of any unicode character. It's a lot more compact than the character palette. You can find it here: File > Utilities > Hex Input... or Alt + f u i. Ian Ian Proudfoot iTP-X Adobe Community Professional -Original Message- From: framers-boun...@lists.frameusers.com [mailto:framers-bounces at lists.frameusers.com] On Behalf Of Nancy Allison Sent: 24 August 2011 17:01 To: framers at lists.frameusers.com Subject: How to enter Unicode Character in FrameMaker 10? Hi, everyone. I'm using FrameMaker 10 on a Windows 7 system. I currently create a right arrow in my Frame documents by typing the ASCII registered trademark and applying the Symbol font. When I convert the file to HTML, the Symbol font drops out and it reverts to the trademark character. I am assuming that using the Unicode character will solve this problem. (first question: do you agree?) Here's a writeup of the character: http://www.fileformat.info/info/unicode/char/2192/index.htm Which of these cryptic codes to I use to get the character into my text? HOW do I enter the code to do this? Thanks! ___ You are currently subscribed to framers as ian.proudfoot at itp-x.co.uk. Send list messages to framers at lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscribe at lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/ian.proudfoot%40itp-x.co .uk Send administrative questions to listadmin at frameusers.com. Visit http://www.frameusers.com/ for more resources and info. ___ You are currently subscribed to framers as bethany.lee at lakeshore.com. Send list messages to framers at lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscribe at lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/bethany.lee%40lakeshore.com Send administrative questions to listadmin at frameusers.com. Visit http://www.frameusers.com/ for more resources and info.
How to enter Unicode Character in FrameMaker 10?
Hi Nancy, FrameMaker does have the Hex Input palette where you can type the hex value of any unicode character. It's a lot more compact than the character palette. You can find it here: File > Utilities > Hex Input... or Alt + f u i. Ian Ian Proudfoot iTP-X Adobe Community Professional -Original Message- From: framers-boun...@lists.frameusers.com [mailto:framers-bounces at lists.frameusers.com] On Behalf Of Nancy Allison Sent: 24 August 2011 17:01 To: framers at lists.frameusers.com Subject: How to enter Unicode Character in FrameMaker 10? Hi, everyone. I'm using FrameMaker 10 on a Windows 7 system. I currently create a right arrow in my Frame documents by typing the ASCII registered trademark and applying the Symbol font. When I convert the file to HTML, the Symbol font drops out and it reverts to the trademark character. I am assuming that using the Unicode character will solve this problem. (first question: do you agree?) Here's a writeup of the character: http://www.fileformat.info/info/unicode/char/2192/index.htm Which of these cryptic codes to I use to get the character into my text? HOW do I enter the code to do this? Thanks! ___ You are currently subscribed to framers as ian.proudfoot at itp-x.co.uk. Send list messages to framers at lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscribe at lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/ian.proudfoot%40itp-x.co .uk Send administrative questions to listadmin at frameusers.com. Visit http://www.frameusers.com/ for more resources and info.
How to enter Unicode Character in FrameMaker 10?
There is a Windows input method to 'type' Unicode characters, using the numeric pad to type the unicode hex number. Steps required: 1. You'll need to enable the Windows 'hex numpad' option. As there's no user interface option for this [AFAIK], you'll need to modify the Windows registry: 1a. Click Start > Run and launch the registry editor: RegEdit.exe 1b. Navigate to [HKEY_CURRENT_USER\Control Panel\Input Method] 1c. Locate the key named "EnableHexNumpad". If there isn't one, use the right mouse menu to create a new string value with the type REG_SZ 1d. Double-click the EnableHexNumpad key to give it a value of 1 1e. Close RegEdit. 2. Reboot. Because it's Windows. 3. Log back in, and then you can then start inserting Unicode characters - if you know their hex code. For example: Hold down your Left-Alt key, and then on the numeric pad: press + press 2 press 1 press 9 press 2 and then release the Alt key. You will how have a right-arrow. Hex a to f is done using your main keyboard. NOTE: I'm not certain if this still works in Windows 7, but knowing Microsoft they'll still support it in the same way that you can't have specific file names, such as: con.doc ; prn.txt ; aux.html etc. still! By reading the Wikipedia page: http://en.wikipedia.org/wiki/Unicode_input#In_Microsoft_Windows ... I discovered that Microsoft have a 'RichEdit' mode in some applications, which will allow a user to type a number, followed by Alt+x - but it appears that Adobe / FrameMaker do not support that. Regards // Simon BUCH -- M-AIS eAIP consultant
RE: How to enter Unicode Character in FrameMaker 10?
Hi Nancy, FrameMaker does have the Hex Input palette where you can type the hex value of any unicode character. It's a lot more compact than the character palette. You can find it here: File > Utilities > Hex Input... or Alt + f u i. Ian Ian Proudfoot iTP-X Adobe Community Professional -Original Message- From: framers-boun...@lists.frameusers.com [mailto:framers-boun...@lists.frameusers.com] On Behalf Of Nancy Allison Sent: 24 August 2011 17:01 To: framers@lists.frameusers.com Subject: How to enter Unicode Character in FrameMaker 10? Hi, everyone. I'm using FrameMaker 10 on a Windows 7 system. I currently create a right arrow in my Frame documents by typing the ASCII registered trademark and applying the Symbol font. When I convert the file to HTML, the Symbol font drops out and it reverts to the trademark character. I am assuming that using the Unicode character will solve this problem. (first question: do you agree?) Here's a writeup of the character: http://www.fileformat.info/info/unicode/char/2192/index.htm Which of these cryptic codes to I use to get the character into my text? HOW do I enter the code to do this? Thanks! ___ You are currently subscribed to framers as ian.proudf...@itp-x.co.uk. Send list messages to framers@lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscr...@lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/ian.proudfoot%40itp-x.co .uk Send administrative questions to listad...@frameusers.com. Visit http://www.frameusers.com/ for more resources and info. ___ You are currently subscribed to framers as arch...@mail-archive.com. Send list messages to framers@lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscr...@lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to listad...@frameusers.com. Visit http://www.frameusers.com/ for more resources and info.
RE: How to enter Unicode Character in FrameMaker 10?
There is a Windows input method to 'type' Unicode characters, using the numeric pad to type the unicode hex number. Steps required: 1. You'll need to enable the Windows 'hex numpad' option. As there's no user interface option for this [AFAIK], you'll need to modify the Windows registry: 1a. Click Start > Run and launch the registry editor: RegEdit.exe 1b. Navigate to [HKEY_CURRENT_USER\Control Panel\Input Method] 1c. Locate the key named "EnableHexNumpad". If there isn't one, use the right mouse menu to create a new string value with the type REG_SZ 1d. Double-click the EnableHexNumpad key to give it a value of 1 1e. Close RegEdit. 2. Reboot. Because it's Windows. 3. Log back in, and then you can then start inserting Unicode characters - if you know their hex code. For example: Hold down your Left-Alt key, and then on the numeric pad: press + press 2 press 1 press 9 press 2 and then release the Alt key. You will how have a right-arrow. Hex a to f is done using your main keyboard. NOTE: I'm not certain if this still works in Windows 7, but knowing Microsoft they'll still support it in the same way that you can't have specific file names, such as: con.doc ; prn.txt ; aux.html etc. still! By reading the Wikipedia page: http://en.wikipedia.org/wiki/Unicode_input#In_Microsoft_Windows ... I discovered that Microsoft have a 'RichEdit' mode in some applications, which will allow a user to type a number, followed by Alt+x - but it appears that Adobe / FrameMaker do not support that. Regards // Simon BUCH -- M-AIS eAIP consultant ___ You are currently subscribed to framers as arch...@mail-archive.com. Send list messages to framers@lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscr...@lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to listad...@frameusers.com. Visit http://www.frameusers.com/ for more resources and info.
RE: How to enter Unicode Character in FrameMaker 10?
Hi Nancy, Choose File > Utilities > Character Palette, then use the arrows at the right-hand side of the Character Palette to scroll down to the unicode range you need (219, in your case). The 219 range should contain the glyph you want. Click it to insert it into your document at the cursor. HTH, Mike > Date: Wed, 24 Aug 2011 11:00:44 -0500 > From: ma...@verizon.net > To: framers@lists.frameusers.com > Subject: How to enter Unicode Character in FrameMaker 10? > > Hi, everyone. > > I'm using FrameMaker 10 on a Windows 7 system. > > I currently create a right arrow in my Frame documents by typing the ASCII > registered trademark and applying the Symbol font. When I convert the file to > HTML, the Symbol font drops out and it reverts to the trademark character. > > I am assuming that using the Unicode character will solve this problem. > (first question: do you agree?) Here's a writeup of the character: > > http://www.fileformat.info/info/unicode/char/2192/index.htm > > Which of these cryptic codes to I use to get the character into my text? HOW > do I enter the code to do this? > > Thanks! > > ___ > > > You are currently subscribed to framers as mt_pear...@hotmail.com. > > Send list messages to framers@lists.frameusers.com. > > To unsubscribe send a blank email to > framers-unsubscr...@lists.frameusers.com > or visit > http://lists.frameusers.com/mailman/options/framers/mt_pearson%40hotmail.com > > Send administrative questions to listad...@frameusers.com. Visit > http://www.frameusers.com/ for more resources and info. ___ You are currently subscribed to framers as arch...@mail-archive.com. Send list messages to framers@lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscr...@lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to listad...@frameusers.com. Visit http://www.frameusers.com/ for more resources and info.
How to enter Unicode Character in FrameMaker 10?
On 24/08/2011 1:50 PM, Jeremy H. Griffith wrote: > On Wed, 24 Aug 2011 11:00:44 -0500 (CDT), Nancy Allison > wrote: > >> Which of these cryptic codes to I use to get the >> character into my text? HOW do I enter the code to do this? > > Copy and paste it from the windows char map tool. > Open the char map, select Arial Unicode MS as the > font, check the Advanced view box, select Unicode > as the char set, after it type 2192 in the box, > click Select, click Copy, then in Frame Paste > Special as Unicode. > > No keyboard method I know of. > No keyboard shortcuts, but if you use the symbol often, you can create a variable and insert that with a keyboard shortcut (Alt + s, v, first letter of variable name, Enter). (I'm speaking from an FM9 POV, but FM10 probably works the same.) When creating the variable, you can type the unicode in the form \u2192, with no need to suffer the grim horror of the Character Palette. (You may need to first create a character tag specifying one of the fonts that contains the arrow at that code point, and include the tag in the variable definition.) HTH, -- Stuart Rogers Technical Communicator Phoenix Geophysics Limited 3781 Victoria Park Avenue, Unit 3 Toronto, ON, Canada M1W 3K5 +1 (416) 491-7340 x 325 http://www.phoenix-geophysics.com
How to enter Unicode Character in FrameMaker 10?
Fantastic! Thanks, all! This list is a treasure. --Nancy Aug 24, 2011 01:51:28 PM, jeremy at omsys.com wrote: On Wed, 24 Aug 2011 11:00:44 -0500 (CDT), Nancy Allison wrote: >Which of these cryptic codes to I use to get the >character into my text? HOW do I enter the code to do this? Copy and paste it from the windows char map tool. Open the char map, select Arial Unicode MS as the font, check the Advanced view box, select Unicode as the char set, after it type 2192 in the box, click Select, click Copy, then in Frame Paste Special as Unicode. No keyboard method I know of. -- Jeremy H. Griffith, at Omni Systems Inc. http://www.omsys.com/
How to enter Unicode Character in FrameMaker 10?
On Wed, 24 Aug 2011 11:00:44 -0500 (CDT), Nancy Allison wrote: >Which of these cryptic codes to I use to get the >character into my text? HOW do I enter the code to do this? Copy and paste it from the windows char map tool. Open the char map, select Arial Unicode MS as the font, check the Advanced view box, select Unicode as the char set, after it type 2192 in the box, click Select, click Copy, then in Frame Paste Special as Unicode. No keyboard method I know of. -- Jeremy H. Griffith, at Omni Systems Inc. http://www.omsys.com/
How to enter Unicode Character in FrameMaker 10?
Hi, Nadine. I see that I've wandered into a larger question than I meant to! Right now, I just need to find out the easiest way to find a special character in a Unicode font and insert it into my Frame documents, irrespective of whether they'll be translated into HTML. mif2go is very powerful and probably does do what you suggest, but I want to learn the least complicated way of selecting Unicode characters for my Frame document even if I won't be using mif2go with it. --Nancy Aug 24, 2011 01:43:51 PM, nadinemurray at yahoo.ca wrote: I'm not familiar with using Mif2Go to create HMTL, but can you set it to "translate" your symbols into the correct entity? Nadine
How to enter Unicode Character in FrameMaker 10?
Hi, Mike and everyone. I find the File/Utilities/Character Palette feature pretty unfriendly because there's no way to search it with descriptive text (like "arrow" or "right arrow") and I tend to get seasick scrolling through it and squinting at the grey-on-black characters. Is there a way to search it? If there isn't a way to search it, then I need to find the code somewhere else so I can then find it in the palette. Here is the process I think I'm going to have to follow. 1. Go to http://www.fileformat.info/info/unicode/char/2192/index.htm or a similar site. 2. Search for the character I need. 3. Look at the U + code. The first three numbers of the code give me the row number in the character palette. 4. Open the character palette and scroll to that line. 5. Select the character and insert it. If you get seasick when scrolling, is this basically what you do? Is there a way to circumvent steps 4 and 5 and just key in the code directly? How do you do that in FrameMaker? Numlock -- Alt -- code doesn't work. Thanks!
How to enter Unicode Character in FrameMaker 10?
I use mif2go. Aug 24, 2011 12:13:49 PM, nadinemurray at yahoo.ca wrote: Out of curiosity, how do you convert your FM files to HTML? Nadine
Re: How to enter Unicode Character in FrameMaker 10?
On 24/08/2011 1:50 PM, Jeremy H. Griffith wrote: On Wed, 24 Aug 2011 11:00:44 -0500 (CDT), Nancy Allison wrote: Which of these cryptic codes to I use to get the character into my text? HOW do I enter the code to do this? Copy and paste it from the windows char map tool. Open the char map, select Arial Unicode MS as the font, check the Advanced view box, select Unicode as the char set, after it type 2192 in the box, click Select, click Copy, then in Frame Paste Special as Unicode. No keyboard method I know of. No keyboard shortcuts, but if you use the symbol often, you can create a variable and insert that with a keyboard shortcut (Alt + s, v, first letter of variable name, Enter). (I'm speaking from an FM9 POV, but FM10 probably works the same.) When creating the variable, you can type the unicode in the form \u2192, with no need to suffer the grim horror of the Character Palette. (You may need to first create a character tag specifying one of the fonts that contains the arrow at that code point, and include the tag in the variable definition.) HTH, -- Stuart Rogers Technical Communicator Phoenix Geophysics Limited 3781 Victoria Park Avenue, Unit 3 Toronto, ON, Canada M1W 3K5 +1 (416) 491-7340 x 325 http://www.phoenix-geophysics.com ___ You are currently subscribed to framers as arch...@mail-archive.com. Send list messages to framers@lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscr...@lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to listad...@frameusers.com. Visit http://www.frameusers.com/ for more resources and info.
RE: Re: How to enter Unicode Character in FrameMaker 10?
You *should* also be able to press and hold the ALT key and type on a number pad 2192. Release the ALT key. DO NOT type on the numbers above your letter keys. It has to be on a number pad. sharon Sharon Burton Content Strategy Consultant 951-369-8590 www.sharonburton.com IM: sharonvbur...@yahoo.com Twitter: sharonburton http://www.linkedin.com/in/sharonvburton -Original Message- From: framers-boun...@lists.frameusers.com [mailto:framers-boun...@lists.frameusers.com] On Behalf Of Nancy Allison Sent: Wednesday, August 24, 2011 11:11 AM To: jer...@omsys.com Cc: framers@lists.frameusers.com Subject: Re: Re: How to enter Unicode Character in FrameMaker 10? Fantastic! Thanks, all! This list is a treasure. --Nancy Aug 24, 2011 01:51:28 PM, jer...@omsys.com wrote: On Wed, 24 Aug 2011 11:00:44 -0500 (CDT), Nancy Allison wrote: >Which of these cryptic codes to I use to get the >character into my text? HOW do I enter the code to do this? Copy and paste it from the windows char map tool. Open the char map, select Arial Unicode MS as the font, check the Advanced view box, select Unicode as the char set, after it type 2192 in the box, click Select, click Copy, then in Frame Paste Special as Unicode. No keyboard method I know of. -- Jeremy H. Griffith, at Omni Systems Inc. http://www.omsys.com/ ___ You are currently subscribed to framers as sha...@anthrobytes.com. Send list messages to framers@lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscr...@lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/sharon%40anthrobytes.com Send administrative questions to listad...@frameusers.com. Visit http://www.frameusers.com/ for more resources and info. ___ You are currently subscribed to framers as arch...@mail-archive.com. Send list messages to framers@lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscr...@lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to listad...@frameusers.com. Visit http://www.frameusers.com/ for more resources and info.
How to enter Unicode Character in FrameMaker 10?
You *should* also be able to press and hold the ALT key and type on a number pad 2192. Release the ALT key. DO NOT type on the numbers above your letter keys. It has to be on a number pad. sharon Sharon Burton Content Strategy Consultant 951-369-8590 www.sharonburton.com IM: sharonvburton at yahoo.com Twitter: sharonburton http://www.linkedin.com/in/sharonvburton -Original Message- From: framers-boun...@lists.frameusers.com [mailto:framers-bounces at lists.frameusers.com] On Behalf Of Nancy Allison Sent: Wednesday, August 24, 2011 11:11 AM To: jeremy at omsys.com Cc: framers at lists.frameusers.com Subject: Re: Re: How to enter Unicode Character in FrameMaker 10? Fantastic! Thanks, all! This list is a treasure. --Nancy Aug 24, 2011 01:51:28 PM, jeremy at omsys.com wrote: On Wed, 24 Aug 2011 11:00:44 -0500 (CDT), Nancy Allison wrote: >Which of these cryptic codes to I use to get the >character into my text? HOW do I enter the code to do this? Copy and paste it from the windows char map tool. Open the char map, select Arial Unicode MS as the font, check the Advanced view box, select Unicode as the char set, after it type 2192 in the box, click Select, click Copy, then in Frame Paste Special as Unicode. No keyboard method I know of. -- Jeremy H. Griffith, at Omni Systems Inc. http://www.omsys.com/ ___ You are currently subscribed to framers as sharon at anthrobytes.com. Send list messages to framers at lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscribe at lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/sharon%40anthrobytes.com Send administrative questions to listadmin at frameusers.com. Visit http://www.frameusers.com/ for more resources and info.
Re: Re: How to enter Unicode Character in FrameMaker 10?
Fantastic! Thanks, all! This list is a treasure. --Nancy Aug 24, 2011 01:51:28 PM, jer...@omsys.com wrote: On Wed, 24 Aug 2011 11:00:44 -0500 (CDT), Nancy Allison wrote: >Which of these cryptic codes to I use to get the >character into my text? HOW do I enter the code to do this? Copy and paste it from the windows char map tool. Open the char map, select Arial Unicode MS as the font, check the Advanced view box, select Unicode as the char set, after it type 2192 in the box, click Select, click Copy, then in Frame Paste Special as Unicode. No keyboard method I know of. -- Jeremy H. Griffith, at Omni Systems Inc. http://www.omsys.com/ ___ You are currently subscribed to framers as arch...@mail-archive.com. Send list messages to framers@lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscr...@lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to listad...@frameusers.com. Visit http://www.frameusers.com/ for more resources and info.
How to enter Unicode Character in FrameMaker 10?
Hi, everyone. I'm using FrameMaker 10 on a Windows 7 system. I currently create a right arrow in my Frame documents by typing the ASCII registered trademark and applying the Symbol font. When I convert the file to HTML, the Symbol font drops out and it reverts to the trademark character. I am assuming that using the Unicode character will solve this problem. (first question: do you agree?) Here's a writeup of the character: http://www.fileformat.info/info/unicode/char/2192/index.htm Which of these cryptic codes to I use to get the character into my text? HOW do I enter the code to do this? Thanks!
Re: How to enter Unicode Character in FrameMaker 10?
On Wed, 24 Aug 2011 11:00:44 -0500 (CDT), Nancy Allison wrote: >Which of these cryptic codes to I use to get the >character into my text? HOW do I enter the code to do this? Copy and paste it from the windows char map tool. Open the char map, select Arial Unicode MS as the font, check the Advanced view box, select Unicode as the char set, after it type 2192 in the box, click Select, click Copy, then in Frame Paste Special as Unicode. No keyboard method I know of. -- Jeremy H. Griffith, at Omni Systems Inc. http://www.omsys.com/ ___ You are currently subscribed to framers as arch...@mail-archive.com. Send list messages to framers@lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscr...@lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to listad...@frameusers.com. Visit http://www.frameusers.com/ for more resources and info.
Re: How to enter Unicode Character in FrameMaker 10?
Hi, Nadine. I see that I've wandered into a larger question than I meant to! Right now, I just need to find out the easiest way to find a special character in a Unicode font and insert it into my Frame documents, irrespective of whether they'll be translated into HTML. mif2go is very powerful and probably does do what you suggest, but I want to learn the least complicated way of selecting Unicode characters for my Frame document even if I won't be using mif2go with it. --Nancy Aug 24, 2011 01:43:51 PM, nadinemur...@yahoo.ca wrote: I'm not familiar with using Mif2Go to create HMTL, but can you set it to "translate" your symbols into the correct entity? Nadine ___ You are currently subscribed to framers as arch...@mail-archive.com. Send list messages to framers@lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscr...@lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to listad...@frameusers.com. Visit http://www.frameusers.com/ for more resources and info.
Re: RE: How to enter Unicode Character in FrameMaker 10?
Hi, Mike and everyone. I find the File/Utilities/Character Palette feature pretty unfriendly because there's no way to search it with descriptive text (like "arrow" or "right arrow") and I tend to get seasick scrolling through it and squinting at the grey-on-black characters. Is there a way to search it? If there isn't a way to search it, then I need to find the code somewhere else so I can then find it in the palette. Here is the process I think I'm going to have to follow. 1. Go to http://www.fileformat.info/info/unicode/char/2192/index.htm or a similar site. 2. Search for the character I need. 3. Look at the U + code. The first three numbers of the code give me the row number in the character palette. 4. Open the character palette and scroll to that line. 5. Select the character and insert it. If you get seasick when scrolling, is this basically what you do? Is there a way to circumvent steps 4 and 5 and just key in the code directly? How do you do that in FrameMaker? Numlock -- Alt -- code doesn't work. Thanks! ___ You are currently subscribed to framers as arch...@mail-archive.com. Send list messages to framers@lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscr...@lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to listad...@frameusers.com. Visit http://www.frameusers.com/ for more resources and info.
Re: Re: How to enter Unicode Character in FrameMaker 10?
I use mif2go. Aug 24, 2011 12:13:49 PM, nadinemur...@yahoo.ca wrote: Out of curiosity, how do you convert your FM files to HTML? Nadine ___ You are currently subscribed to framers as arch...@mail-archive.com. Send list messages to framers@lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscr...@lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to listad...@frameusers.com. Visit http://www.frameusers.com/ for more resources and info.
How to enter Unicode Character in FrameMaker 10?
Hi Nancy, Choose File > Utilities > Character Palette, then use the arrows at the right-hand side of the Character Palette to scroll down to the unicode range you need (219, in your case). The 219 range should contain the glyph you want. Click it to insert it into your document at the cursor. HTH, Mike > Date: Wed, 24 Aug 2011 11:00:44 -0500 > From: maker at verizon.net > To: framers at lists.frameusers.com > Subject: How to enter Unicode Character in FrameMaker 10? > > Hi, everyone. > > I'm using FrameMaker 10 on a Windows 7 system. > > I currently create a right arrow in my Frame documents by typing the ASCII > registered trademark and applying the Symbol font. When I convert the file to > HTML, the Symbol font drops out and it reverts to the trademark character. > > I am assuming that using the Unicode character will solve this problem. > (first question: do you agree?) Here's a writeup of the character: > > http://www.fileformat.info/info/unicode/char/2192/index.htm > > Which of these cryptic codes to I use to get the character into my text? HOW > do I enter the code to do this? > > Thanks! > > ___ > > > You are currently subscribed to framers as mt_pearson at hotmail.com. > > Send list messages to framers at lists.frameusers.com. > > To unsubscribe send a blank email to > framers-unsubscribe at lists.frameusers.com > or visit > http://lists.frameusers.com/mailman/options/framers/mt_pearson%40hotmail.com > > Send administrative questions to listadmin at frameusers.com. Visit > http://www.frameusers.com/ for more resources and info. -- next part -- An HTML attachment was scrubbed... URL: <http://lists.frameusers.com/pipermail/framers/attachments/20110824/ffdeea79/attachment.html>
How to enter Unicode Character in FrameMaker 10?
Hi, everyone. I'm using FrameMaker 10 on a Windows 7 system. I currently create a right arrow in my Frame documents by typing the ASCII registered trademark and applying the Symbol font. When I convert the file to HTML, the Symbol font drops out and it reverts to the trademark character. I am assuming that using the Unicode character will solve this problem. (first question: do you agree?) Here's a writeup of the character: http://www.fileformat.info/info/unicode/char/2192/index.htm Which of these cryptic codes to I use to get the character into my text? HOW do I enter the code to do this? Thanks! ___ You are currently subscribed to framers as arch...@mail-archive.com. Send list messages to framers@lists.frameusers.com. To unsubscribe send a blank email to framers-unsubscr...@lists.frameusers.com or visit http://lists.frameusers.com/mailman/options/framers/archive%40mail-archive.com Send administrative questions to listad...@frameusers.com. Visit http://www.frameusers.com/ for more resources and info.