Re: [Framers] [WTF ramemaker] RE: Anyone know of a way to include a non-breaking hyphen/dash in a variable definition?

2017-10-11 Thread David Artman 
   Yay! I found that in an old forum post about FM 6.5. :)

   Here's a good resource, in general:

   [1]http://help.adobe.com/en_US/framemaker/2015/using/index.html#t=using
   -framemaker-2015%2Ffrm_references_re%2Ffrm_character_sets_cs%2FWindows_
   character_sets-.htm

    Original Message 
   Subject: Re: [Framers] [WTF ramemaker] RE: Anyone know of a way to
   include a non-breaking hyphen/dash in a variable definition?
   From: Art Campbell <[2]art.campb...@gmail.com>
   Date: Tue, October 10, 2017 4:18 pm
   To: "An email list for people using Adobe FrameMaker software."
   <[3]framers@lists.frameusers.com>
   Cc: Framers List <[4]writers--techies-on-framema...@googlegroups.com>
   \x15 is working!
   Didn't try the other possible solutions yet.
   Art Campbell
   [5]art.campb...@gmail.com
   "... In my opinion, there's nothing in this world beats a '52 Vincent
   and
   a redheaded girl." -- Richard Thompson
   No disclaimers apply.
   DoD 358
   On Tue, Oct 10, 2017 at 2:36 PM, David Artman
   <[6]da...@davidartman.com> wrote:
   > How about:
   > \x15
   > ...or:
   > \x2011
   > ...?
   > \x15 is a VERY old way to do it, but perhaps not hamstrung yet? The
   \x2011
   > is me guessing at a way the modern Unicode hex value could be
   inserted for
   > interpretation by FM.
   > Alternately, type one or insert one using the symbols palette, copy
   it,
   > and see if it pastes into the definition?
   >
   > There's GOT to be a way... similarly, thinspace is often a critical
   one,
   > for volatile (or scoped/personalized) measurements and their units of
   > measure.
   >
   > HTH;
   > David
   >
   > - Original Message - Subject: Re: [Framers] [WTF
   > ramemaker] RE: Anyone know of a way to include a non-breaking
   hyphen/dash
   > in a variable definition?
   > From: "Art Campbell" <[7]art.campb...@gmail.com>
   > Date: 10/10/17 2:23 pm
   > To: "Rick Quatro" <[8]r...@rickquatro.com>
   > Cc: "Framers List"
   <[9]writers--techies-on-framema...@googlegroups.com>, "An
   > email list for people using Adobe FrameMaker software." <
   > [10]framers@lists.frameusers.com>
   >
   > Nope, that's not it...
   >
   >
   > Art Campbell
   > ...
   >
   > On Tue, Oct 10, 2017 at 11:44 AM, Rick Quatro
   <[11]r...@rickquatro.com>
   > wrote:
   >
   > > Hi Art,
   > >
   > > Try \+ in the dialog box.
   > >
   > > Rick
   > >
   > > Rick Quatro
   > ...
   > > -Original Message-
   > > Subject: [Framers] Anyone know of a way to include a non-breaking
   > > hyphen/dash in a variable definition?
   > >
   > > On FM '17
   > ...

References

   1. 
http://help.adobe.com/en_US/framemaker/2015/using/index.html#t=using-framemaker-2015/frm_references_re/frm_character_sets_cs/Windows_character_sets-.htm
   2. mailto:art.campb...@gmail.com
   3. mailto:framers@lists.frameusers.com
   4. mailto:writers--techies-on-framema...@googlegroups.com
   5. mailto:art.campb...@gmail.com
   6. mailto:da...@davidartman.com
   7. mailto:art.campb...@gmail.com
   8. mailto:r...@rickquatro.com
   9. mailto:writers--techies-on-framema...@googlegroups.com
  10. mailto:framers@lists.frameusers.com
  11. mailto:r...@rickquatro.com
___

This message is from the Framers mailing list

Send messages to framers@lists.frameusers.com
Visit the list's homepage at  http://www.frameusers.com
Archives located at http://www.mail-archive.com/framers%40lists.frameusers.com/
Subscribe and unsubscribe at 
http://lists.frameusers.com/listinfo.cgi/framers-frameusers.com
Send administrative questions to listad...@frameusers.com

Re: [Framers] [WTF ramemaker] RE: Anyone know of a way to include a non-breaking hyphen/dash in a variable definition?

2017-10-10 Thread Art Campbell 
\x15 is working!

Didn't try the other possible solutions yet.


Art Campbell
  art.campb...@gmail.com
  "... In my opinion, there's nothing in this world beats a '52 Vincent and
a redheaded girl." -- Richard Thompson
  No disclaimers apply.
   DoD 358


On Tue, Oct 10, 2017 at 2:36 PM, David Artman  wrote:

> How about:
>  \x15
> ...or:
>  \x2011
> ...?
> \x15 is a VERY old way to do it, but perhaps not hamstrung yet? The \x2011
> is me guessing at a way the modern Unicode hex value could be inserted for
> interpretation by FM.
> Alternately, type one or insert one using the symbols palette, copy it,
> and see if it pastes into the definition?
>
> There's GOT to be a way... similarly, thinspace is often a critical one,
> for volatile (or scoped/personalized) measurements and their units of
> measure.
>
> HTH;
> David
>
> - Original Message - Subject: Re: [Framers] [WTF
> ramemaker] RE: Anyone know of a way to include a non-breaking hyphen/dash
> in a variable definition?
> From: "Art Campbell" 
> Date: 10/10/17 2:23 pm
> To: "Rick Quatro" 
> Cc: "Framers List" , "An
> email list for people using Adobe FrameMaker software." <
> framers@lists.frameusers.com>
>
> Nope, that's not it...
>
>
>  Art Campbell
> ...
>
>  On Tue, Oct 10, 2017 at 11:44 AM, Rick Quatro 
> wrote:
>
>  > Hi Art,
>  >
>  > Try \+ in the dialog box.
>  >
>  > Rick
>  >
>  > Rick Quatro
> ...
> > -Original Message-
> > Subject: [Framers] Anyone know of a way to include a non-breaking
>  > hyphen/dash in a variable definition?
>  >
>  > On FM '17
> ...
> ___
>
> This message is from the Framers mailing list
>
> Send messages to framers@lists.frameusers.com
> Visit the list's homepage at  http://www.frameusers.com
> Archives located at http://www.mail-archive.com/
> framers%40lists.frameusers.com/
> Subscribe and unsubscribe at http://lists.frameusers.com/
> listinfo.cgi/framers-frameusers.com
> Send administrative questions to listad...@frameusers.com
>
___

This message is from the Framers mailing list

Send messages to framers@lists.frameusers.com
Visit the list's homepage at  http://www.frameusers.com
Archives located at http://www.mail-archive.com/framers%40lists.frameusers.com/
Subscribe and unsubscribe at 
http://lists.frameusers.com/listinfo.cgi/framers-frameusers.com
Send administrative questions to listad...@frameusers.com

Re: [Framers] [WTF ramemaker] RE: Anyone know of a way to include a non-breaking hyphen/dash in a variable definition?

2017-10-10 Thread David Spreadbury 
I an currently using Framemaker 2015 and use "\+" in many variables. I also 
have many documents in older versions and it works there as well.
 

On Tuesday, October 10, 2017 1:58 PM, "gr...@hedgewizard.net" 
 wrote:
 

   Ctrl+Shift(hyphen)

    On October 10, 2017 at 12:36 PM David Artman 
    wrote:

    How about:
    \x15
    ...or:
    \x2011
    ...?
    \x15 is a VERY old way to do it, but perhaps not hamstrung yet? The
    \x2011 is me guessing at a way the modern Unicode hex value could be
    inserted for interpretation by FM.
    Alternately, type one or insert one using the symbols palette, copy
    it, and see if it pastes into the definition?

    There's GOT to be a way... similarly, thinspace is often a critical
    one, for volatile (or scoped/personalized) measurements and their
    units of measure.

    HTH;
    David

    - Original Message - Subject: Re: [Framers] [WTF
    ramemaker] RE: Anyone know of a way to include a non-breaking
    hyphen/dash in a variable definition?
    From: "Art Campbell" 
    Date: 10/10/17 2:23 pm
    To: "Rick Quatro" 
    Cc: "Framers List"
    , "An email list
    for people using Adobe FrameMaker software."
    

    Nope, that's not it...

    Art Campbell
    ...

    On Tue, Oct 10, 2017 at 11:44 AM, Rick Quatro 
    wrote:

    Hi Art,

    Try \+ in the dialog box.

    Rick

    Rick Quatro
    ...
    -Original Message-
    Subject: [Framers] Anyone know of a way to include a non-breaking
    hyphen/dash in a variable definition?

    On FM '17
    ...

    ___

    This message is from the Framers mailing list

    Send messages to framers@lists.frameusers.com
    Visit the list's homepage at [1]http://www.frameusers.com
    Archives located at
    [2]http://www.mail-archive.com/framers%40lists.frameusers.com/
    Subscribe and unsubscribe at
    [3]http://lists.frameusers.com/listinfo.cgi/framers-frameusers.com
    Send administrative questions to listad...@frameusers.com

References

  1. http://www.frameusers.com/
  2. http://www.mail-archive.com/framers@lists.frameusers.com/
  3. http://lists.frameusers.com/listinfo.cgi/framers-frameusers.com
___

This message is from the Framers mailing list

Send messages to framers@lists.frameusers.com
Visit the list's homepage at  http://www.frameusers.com
Archives located at http://www.mail-archive.com/framers%40lists.frameusers.com/
Subscribe and unsubscribe at 
http://lists.frameusers.com/listinfo.cgi/framers-frameusers.com
Send administrative questions to listad...@frameusers.com


   
___

This message is from the Framers mailing list

Send messages to framers@lists.frameusers.com
Visit the list's homepage at  http://www.frameusers.com
Archives located at http://www.mail-archive.com/framers%40lists.frameusers.com/
Subscribe and unsubscribe at 
http://lists.frameusers.com/listinfo.cgi/framers-frameusers.com
Send administrative questions to listad...@frameusers.com

Re: [Framers] [WTF ramemaker] RE: Anyone know of a way to include a non-breaking hyphen/dash in a variable definition?

2017-10-10 Thread grant 
   Ctrl+Shift(hyphen)

 On October 10, 2017 at 12:36 PM David Artman 
 wrote:

 How about:
 \x15
 ...or:
 \x2011
 ...?
 \x15 is a VERY old way to do it, but perhaps not hamstrung yet? The
 \x2011 is me guessing at a way the modern Unicode hex value could be
 inserted for interpretation by FM.
 Alternately, type one or insert one using the symbols palette, copy
 it, and see if it pastes into the definition?

 There's GOT to be a way... similarly, thinspace is often a critical
 one, for volatile (or scoped/personalized) measurements and their
 units of measure.

 HTH;
 David

 - Original Message - Subject: Re: [Framers] [WTF
 ramemaker] RE: Anyone know of a way to include a non-breaking
 hyphen/dash in a variable definition?
 From: "Art Campbell" 
 Date: 10/10/17 2:23 pm
 To: "Rick Quatro" 
 Cc: "Framers List"
 , "An email list
 for people using Adobe FrameMaker software."
 

 Nope, that's not it...

 Art Campbell
 ...

 On Tue, Oct 10, 2017 at 11:44 AM, Rick Quatro 
 wrote:

 Hi Art,

 Try \+ in the dialog box.

 Rick

 Rick Quatro
 ...
 -Original Message-
 Subject: [Framers] Anyone know of a way to include a non-breaking
 hyphen/dash in a variable definition?

 On FM '17
 ...

 ___

 This message is from the Framers mailing list

 Send messages to framers@lists.frameusers.com
 Visit the list's homepage at [1]http://www.frameusers.com
 Archives located at
 [2]http://www.mail-archive.com/framers%40lists.frameusers.com/
 Subscribe and unsubscribe at
 [3]http://lists.frameusers.com/listinfo.cgi/framers-frameusers.com
 Send administrative questions to listad...@frameusers.com

References

   1. http://www.frameusers.com/
   2. http://www.mail-archive.com/framers@lists.frameusers.com/
   3. http://lists.frameusers.com/listinfo.cgi/framers-frameusers.com
___

This message is from the Framers mailing list

Send messages to framers@lists.frameusers.com
Visit the list's homepage at  http://www.frameusers.com
Archives located at http://www.mail-archive.com/framers%40lists.frameusers.com/
Subscribe and unsubscribe at 
http://lists.frameusers.com/listinfo.cgi/framers-frameusers.com
Send administrative questions to listad...@frameusers.com

Re: [Framers] [WTF ramemaker] RE: Anyone know of a way to include a non-breaking hyphen/dash in a variable definition?

2017-10-10 Thread David Artman 
How about:
 \x15
...or:
 \x2011
...?
\x15 is a VERY old way to do it, but perhaps not hamstrung yet? The \x2011 is 
me guessing at a way the modern Unicode hex value could be inserted for 
interpretation by FM.
Alternately, type one or insert one using the symbols palette, copy it, and see 
if it pastes into the definition?
 
There's GOT to be a way... similarly, thinspace is often a critical one, for 
volatile (or scoped/personalized) measurements and their units of measure.
 
HTH;
David
 
- Original Message - Subject: Re: [Framers] [WTF ramemaker] RE: 
Anyone know of a way to include a non-breaking hyphen/dash in a variable 
definition?
From: "Art Campbell" 
Date: 10/10/17 2:23 pm
To: "Rick Quatro" 
Cc: "Framers List" , "An email 
list for people using Adobe FrameMaker software." 

Nope, that's not it...
 
 
 Art Campbell
...
 
 On Tue, Oct 10, 2017 at 11:44 AM, Rick Quatro  wrote:
 
 > Hi Art,
 >
 > Try \+ in the dialog box.
 >
 > Rick
 >
 > Rick Quatro
...
> -Original Message-
> Subject: [Framers] Anyone know of a way to include a non-breaking
 > hyphen/dash in a variable definition?
 >
 > On FM '17
...
___

This message is from the Framers mailing list

Send messages to framers@lists.frameusers.com
Visit the list's homepage at  http://www.frameusers.com
Archives located at http://www.mail-archive.com/framers%40lists.frameusers.com/
Subscribe and unsubscribe at 
http://lists.frameusers.com/listinfo.cgi/framers-frameusers.com
Send administrative questions to listad...@frameusers.com

Re: [Framers] [WTF ramemaker] RE: Anyone know of a way to include a non-breaking hyphen/dash in a variable definition?

2017-10-10 Thread Rick Quatro 
What version of FrameMaker are you using? I got it to work in FM 2015. I will 
send you a document off list.

 

From: writers--techies-on-framema...@googlegroups.com 
[mailto:writers--techies-on-framema...@googlegroups.com] On Behalf Of Art 
Campbell
Sent: Tuesday, October 10, 2017 2:23 PM
To: Rick Quatro 
Cc: An email list for people using Adobe FrameMaker software. 
; Framers List 

Subject: Re: [WTF ramemaker] RE: [Framers] Anyone know of a way to include a 
non-breaking hyphen/dash in a variable definition?

 

Nope, that's not it...




 

Art Campbell
  art.campb...@gmail.com  
  "... In my opinion, there's nothing in this world beats a '52 Vincent and a 
redheaded girl." -- Richard Thompson
  No disclaimers apply.
   DoD 358

 

On Tue, Oct 10, 2017 at 11:44 AM, Rick Quatro  > wrote:

Hi Art,

Try \+ in the dialog box.

Rick

Rick Quatro
Carmen Publishing Inc.
r...@frameexpert.com  
585-366-4017  




-Original Message-
From: Framers
[mailto:framers-bounces+rick  
=rickquatro@lists.frameusers.com 
 ] On Behalf
Of Art Campbell
Sent: Tuesday, October 10, 2017 11:11 AM
To: Framers List  >; Framers List
 >;
lone-tech-writ...@googlegroups.com  
; tcs-users  >
Subject: [Framers] Anyone know of a way to include a non-breaking
hyphen/dash in a variable definition?

On FM '17

Art Campbell
  art.campb...@gmail.com  
  "... In my opinion, there's nothing in this world beats a '52 Vincent and
a redheaded girl." -- Richard Thompson
  No disclaimers apply.
   DoD 358

___

This message is from the Framers mailing list

Send messages to framers@lists.frameusers.com 
  Visit the list's homepage at
http://www.frameusers.com Archives located at
http://www.mail-archive.com/framers%40lists.frameusers.com/
Subscribe and unsubscribe at
http://lists.frameusers.com/listinfo.cgi/framers-frameusers.com
Send administrative questions to listad...@frameusers.com 
 

--
You received this message because you are subscribed to the Google Groups 
"Writers & Techies on Framemaker" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to writers--techies-on-framemaker+unsubscr...@googlegroups.com 
 .
To post to this group, send email to 
writers--techies-on-framema...@googlegroups.com 
 .
Visit this group at 
https://groups.google.com/group/writers--techies-on-framemaker.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/writers--techies-on-framemaker/004501d341de%24a2869330%24e793b990%24%40rickquatro.com.
For more options, visit https://groups.google.com/d/optout.

 

-- 
You received this message because you are subscribed to the Google Groups 
"Writers & Techies on Framemaker" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to writers--techies-on-framemaker+unsubscr...@googlegroups.com 
 .
To post to this group, send email to 
writers--techies-on-framema...@googlegroups.com 
 .
Visit this group at 
https://groups.google.com/group/writers--techies-on-framemaker.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/writers--techies-on-framemaker/CAOW%3DE1cc6mRbXBjARp%2BxmfAgZkbLdWC1JM6Fge5ZePLSvnmo9Q%40mail.gmail.com
 

 .
For more options, visit https://groups.google.com/d/optout.

___

This message is from the Framers mailing list

Send messages to framers@lists.frameusers.com
Visit the list's homepage at  http://www.frameusers.com
Archives located at http://www.mail-archive.com/framers%40lists.frameusers.com/
Subscribe and unsubscribe at

Re: [Framers] [WTF ramemaker] RE: Anyone know of a way to include a non-breaking hyphen/dash in a variable definition?

2017-10-10 Thread Art Campbell 
Nope, that's not it...


Art Campbell
  art.campb...@gmail.com
  "... In my opinion, there's nothing in this world beats a '52 Vincent and
a redheaded girl." -- Richard Thompson
  No disclaimers apply.
   DoD 358


On Tue, Oct 10, 2017 at 11:44 AM, Rick Quatro  wrote:

> Hi Art,
>
> Try \+ in the dialog box.
>
> Rick
>
> Rick Quatro
> Carmen Publishing Inc.
> r...@frameexpert.com
> 585-366-4017
>
>
>
> -Original Message-
> From: Framers
> [mailto:framers-bounces+rick=rickquatro@lists.frameusers.com] On
> Behalf
> Of Art Campbell
> Sent: Tuesday, October 10, 2017 11:11 AM
> To: Framers List ; Framers List
> ;
> lone-tech-writ...@googlegroups.com; tcs-users 
> Subject: [Framers] Anyone know of a way to include a non-breaking
> hyphen/dash in a variable definition?
>
> On FM '17
>
> Art Campbell
>   art.campb...@gmail.com
>   "... In my opinion, there's nothing in this world beats a '52 Vincent and
> a redheaded girl." -- Richard Thompson
>   No disclaimers apply.
>DoD 358
> ___
>
> This message is from the Framers mailing list
>
> Send messages to framers@lists.frameusers.com Visit the list's homepage at
> http://www.frameusers.com Archives located at
> http://www.mail-archive.com/framers%40lists.frameusers.com/
> Subscribe and unsubscribe at
> http://lists.frameusers.com/listinfo.cgi/framers-frameusers.com
> Send administrative questions to listad...@frameusers.com
>
> --
> You received this message because you are subscribed to the Google Groups
> "Writers & Techies on Framemaker" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to writers--techies-on-framemaker+unsubscr...@googlegroups.com.
> To post to this group, send email to writers--techies-on-
> framema...@googlegroups.com.
> Visit this group at https://groups.google.com/group/writers--techies-on-
> framemaker.
> To view this discussion on the web visit https://groups.google.com/d/
> msgid/writers--techies-on-framemaker/004501d341de%
> 24a2869330%24e793b990%24%40rickquatro.com.
> For more options, visit https://groups.google.com/d/optout.
>
___

This message is from the Framers mailing list

Send messages to framers@lists.frameusers.com
Visit the list's homepage at  http://www.frameusers.com
Archives located at http://www.mail-archive.com/framers%40lists.frameusers.com/
Subscribe and unsubscribe at 
http://lists.frameusers.com/listinfo.cgi/framers-frameusers.com
Send administrative questions to listad...@frameusers.com