Re: [Frameworks] 16mm Film Projector

[Scott Dorsey]

> Thanks everyone for your help with the resources and everything! I managed
> to get a projector and I just bought a replacement bulb, but it immediately
> started smoking and heating up. Does anyone know what the problem could be?

It's been sitting on a shelf for decades without anything being cleaned or
lubricated.  The belts are bad, the grease is all caked up on everything.
It needs a PM... find a local tech to just do a cleaning and lube.  And hope
you didn't do too much collateral damage by running it without one.
--scott


___
FrameWorks mailing list
FrameWorks@jonasmekasfilms.com
https://mailman-mail5.webfaction.com/listinfo/frameworks

Re: [Frameworks] 16mm Film Projector

[Tara Nelson]

Hi Chris -

I have a projector you can take but like everyone says, you are going to
have to work on it. Not sure if the sound is working.

I'm at Visual Studies Workshop in Rochester NY.
Email taranel...@vsw.org





On Sat, Jun 6, 2020 at 6:28 PM Chris Rodriguez 
wrote:

> I’m currently in Buffalo, NY if anyone can direct towards a
> repair/maintenance shop or anything like that
>
> On Sat, Jun 6, 2020 at 6:10 PM Eric Theise  wrote:
>
>> I'm going to take a cue from Dominic's comment about postage and ask
>> where, apart from "wasn't in NYC", are you Chris Rodriguez? Frameworks is
>> an international list and while plenty of its conversations have little
>> connection to the poster's location, discussions involving weighty
>> equipment or announcements of non-virtual screenings & workshops are tied
>> to place and should be made clear.
>>
>> In this case people might have specific recommendations of where to look
>> for equipment and people/shops who could repair it if they know your area,
>> and might even have equipment in storage they'd be willing to unload.
>>
>>
>> On Sat, Jun 6, 2020 at 2:37 PM Chris Rodriguez <
>> rodriguezchris...@gmail.com> wrote:
>>
>>> How would I go about repairing it and/or figuring out what’s wrong with
>>> it?
>>>
>>> On Sat, Jun 6, 2020 at 5:35 PM Julian Antos <
>>> jul...@chicagofilmsociety.org> wrote:
>>>
 FWIW an Eiki SSL or similar would seems to be the most likely to work
 without issue even after sitting for many years.

 Elmos will have disintegrated rubber rollers, Pageants will almost
 certainly have sound or motor problems, and Bell and Howells will have
 cracked worm gears.

 This isn’t to say that you shouldn’t remove and clean all rollers and
 go over the entire film path, but an Eiki that has been sitting is probably
 ok and won’t need much work. Most likely the focus mechanism will have
 disintegrated and on older machines the belts can also turn to goo.

 Still, these machines should be serviced regularly if they’re expected
 to last. Running a projector with minor mechanical issues can damage your
 films AND your projector.



 On Sat, Jun 6, 2020 at 4:27 PM Dominic Angerame <
 dominic.anger...@gmail.com> wrote:

> Seek and you will find. I have been able to purchase many in good
> working condition. Postage is a problem and trust little on Ebay…most have
> never used the one’s they are selling. I have acquired most of my 
> equipment
> enough for two complete benches etc by constantly looking and carefully,
> very carefully looking on Ebay.
>
> Dominic
>
> > On Jun 6, 2020, at 2:13 PM, Scott Dorsey  wrote:
> >
> > The problem with those freebies is that they aren't free.  People
> get them,
> > they don't want to pay to have them cleaned and lubed before they
> use them,
> > and then they wreck the cams in an hour of using them dry.  Budget
> maybe
> > $200 to $300 to have a free projector put into condition to use.
> >
> > Please do not apply power to a projector that has been on the shelf
> for
> > decades.
> > --scott
> >
> > ___
> > FrameWorks mailing list
> > FrameWorks@jonasmekasfilms.com
> > https://mailman-mail5.webfaction.com/listinfo/frameworks
>
> ___
> FrameWorks mailing list
> FrameWorks@jonasmekasfilms.com
> https://mailman-mail5.webfaction.com/listinfo/frameworks
>
 --
 Julian Antos
 Chicago Film Society
 www.chicagofilmsociety.org
 
 773 827 8991 <(773)%20827-8991>

 ___
 FrameWorks mailing list
 FrameWorks@jonasmekasfilms.com
 https://mailman-mail5.webfaction.com/listinfo/frameworks

>>> ___
>>> FrameWorks mailing list
>>> FrameWorks@jonasmekasfilms.com
>>> https://mailman-mail5.webfaction.com/listinfo/frameworks
>>>
>> ___
>> FrameWorks mailing list
>> FrameWorks@jonasmekasfilms.com
>> https://mailman-mail5.webfaction.com/listinfo/frameworks
>>
> ___
> FrameWorks mailing list
> FrameWorks@jonasmekasfilms.com
> https://mailman-mail5.webfaction.com/listinfo/frameworks
>
___
FrameWorks mailing list
FrameWorks@jonasmekasfilms.com
https://mailman-mail5.webfaction.com/listinfo/frameworks

Re: [Frameworks] 16mm Film Projector

[Dominic Angerame]

What kind of projector did you get
Sounds like a motor problem

d

> On Jun 11, 2020, at 12:14 PM, Chris Rodriguez  
> wrote:
> 
> Thanks everyone for your help with the resources and everything! I managed to 
> get a projector and I just bought a replacement bulb, but it immediately 
> started smoking and heating up. Does anyone know what the problem could be? 
> 
> 
> On Sat, Jun 6, 2020 at 7:34 PM Scott Dorsey  > wrote:
> 
> Abdul Setoua is in Astoria, NY, he has a 718 area code number as I recall.
> PAV is on Long Island.  But it's not THAT hard to ship stuff off.
> --scott
> 
> 
> ___
> FrameWorks mailing list
> FrameWorks@jonasmekasfilms.com 
> https://mailman-mail5.webfaction.com/listinfo/frameworks 
> 
> ___
> FrameWorks mailing list
> FrameWorks@jonasmekasfilms.com
> https://mailman-mail5.webfaction.com/listinfo/frameworks

___
FrameWorks mailing list
FrameWorks@jonasmekasfilms.com
https://mailman-mail5.webfaction.com/listinfo/frameworks

Re: [Frameworks] 16mm Film Projector

[Chris Rodriguez]

Thanks everyone for your help with the resources and everything! I managed
to get a projector and I just bought a replacement bulb, but it immediately
started smoking and heating up. Does anyone know what the problem could be?


On Sat, Jun 6, 2020 at 7:34 PM Scott Dorsey  wrote:

>
> Abdul Setoua is in Astoria, NY, he has a 718 area code number as I recall.
> PAV is on Long Island.  But it's not THAT hard to ship stuff off.
> --scott
>
>
> ___
> FrameWorks mailing list
> FrameWorks@jonasmekasfilms.com
> https://mailman-mail5.webfaction.com/listinfo/frameworks
>
___
FrameWorks mailing list
FrameWorks@jonasmekasfilms.com
https://mailman-mail5.webfaction.com/listinfo/frameworks

Re: [Frameworks] 16mm Film Projector

[Scott Dorsey]

Abdul Setoua is in Astoria, NY, he has a 718 area code number as I recall.
PAV is on Long Island.  But it's not THAT hard to ship stuff off.
--scott


___
FrameWorks mailing list
FrameWorks@jonasmekasfilms.com
https://mailman-mail5.webfaction.com/listinfo/frameworks

Re: [Frameworks] 16mm Film Projector

[Francisco Torres]

well, if after getting the projector from free they do not want to
spend money on basic maint. then they do not know what film is all
about.  these are mechanical devices, like cars. if you get a car for
free you still have to take it to a shop for basic stuff or if you
know how to do it you do it yourself. either way you have to do it.
the reason i sugested the freebies is that in my experience they
usually belonged to an institution so at least they got some form of
regular care at some point in the past as opposed to being owned by an
individual that maybe did not have the means or even the interest to
do it.
___
FrameWorks mailing list
FrameWorks@jonasmekasfilms.com
https://mailman-mail5.webfaction.com/listinfo/frameworks

Re: [Frameworks] 16mm Film Projector

[Chris Rodriguez]

I’m currently in Buffalo, NY if anyone can direct towards a
repair/maintenance shop or anything like that

On Sat, Jun 6, 2020 at 6:10 PM Eric Theise  wrote:

> I'm going to take a cue from Dominic's comment about postage and ask
> where, apart from "wasn't in NYC", are you Chris Rodriguez? Frameworks is
> an international list and while plenty of its conversations have little
> connection to the poster's location, discussions involving weighty
> equipment or announcements of non-virtual screenings & workshops are tied
> to place and should be made clear.
>
> In this case people might have specific recommendations of where to look
> for equipment and people/shops who could repair it if they know your area,
> and might even have equipment in storage they'd be willing to unload.
>
>
> On Sat, Jun 6, 2020 at 2:37 PM Chris Rodriguez <
> rodriguezchris...@gmail.com> wrote:
>
>> How would I go about repairing it and/or figuring out what’s wrong with
>> it?
>>
>> On Sat, Jun 6, 2020 at 5:35 PM Julian Antos <
>> jul...@chicagofilmsociety.org> wrote:
>>
>>> FWIW an Eiki SSL or similar would seems to be the most likely to work
>>> without issue even after sitting for many years.
>>>
>>> Elmos will have disintegrated rubber rollers, Pageants will almost
>>> certainly have sound or motor problems, and Bell and Howells will have
>>> cracked worm gears.
>>>
>>> This isn’t to say that you shouldn’t remove and clean all rollers and go
>>> over the entire film path, but an Eiki that has been sitting is probably ok
>>> and won’t need much work. Most likely the focus mechanism will have
>>> disintegrated and on older machines the belts can also turn to goo.
>>>
>>> Still, these machines should be serviced regularly if they’re expected
>>> to last. Running a projector with minor mechanical issues can damage your
>>> films AND your projector.
>>>
>>>
>>>
>>> On Sat, Jun 6, 2020 at 4:27 PM Dominic Angerame <
>>> dominic.anger...@gmail.com> wrote:
>>>
 Seek and you will find. I have been able to purchase many in good
 working condition. Postage is a problem and trust little on Ebay…most have
 never used the one’s they are selling. I have acquired most of my equipment
 enough for two complete benches etc by constantly looking and carefully,
 very carefully looking on Ebay.

 Dominic

 > On Jun 6, 2020, at 2:13 PM, Scott Dorsey  wrote:
 >
 > The problem with those freebies is that they aren't free.  People get
 them,
 > they don't want to pay to have them cleaned and lubed before they use
 them,
 > and then they wreck the cams in an hour of using them dry.  Budget
 maybe
 > $200 to $300 to have a free projector put into condition to use.
 >
 > Please do not apply power to a projector that has been on the shelf
 for
 > decades.
 > --scott
 >
 > ___
 > FrameWorks mailing list
 > FrameWorks@jonasmekasfilms.com
 > https://mailman-mail5.webfaction.com/listinfo/frameworks

 ___
 FrameWorks mailing list
 FrameWorks@jonasmekasfilms.com
 https://mailman-mail5.webfaction.com/listinfo/frameworks

>>> --
>>> Julian Antos
>>> Chicago Film Society
>>> www.chicagofilmsociety.org 
>>> 773 827 8991 <(773)%20827-8991>
>>>
>>> ___
>>> FrameWorks mailing list
>>> FrameWorks@jonasmekasfilms.com
>>> https://mailman-mail5.webfaction.com/listinfo/frameworks
>>>
>> ___
>> FrameWorks mailing list
>> FrameWorks@jonasmekasfilms.com
>> https://mailman-mail5.webfaction.com/listinfo/frameworks
>>
> ___
> FrameWorks mailing list
> FrameWorks@jonasmekasfilms.com
> https://mailman-mail5.webfaction.com/listinfo/frameworks
>
___
FrameWorks mailing list
FrameWorks@jonasmekasfilms.com
https://mailman-mail5.webfaction.com/listinfo/frameworks

Re: [Frameworks] 16mm Film Projector

[Eric Theise]

I'm going to take a cue from Dominic's comment about postage and ask where,
apart from "wasn't in NYC", are you Chris Rodriguez? Frameworks is an
international list and while plenty of its conversations have little
connection to the poster's location, discussions involving weighty
equipment or announcements of non-virtual screenings & workshops are tied
to place and should be made clear.

In this case people might have specific recommendations of where to look
for equipment and people/shops who could repair it if they know your area,
and might even have equipment in storage they'd be willing to unload.


On Sat, Jun 6, 2020 at 2:37 PM Chris Rodriguez 
wrote:

> How would I go about repairing it and/or figuring out what’s wrong with
> it?
>
> On Sat, Jun 6, 2020 at 5:35 PM Julian Antos 
> wrote:
>
>> FWIW an Eiki SSL or similar would seems to be the most likely to work
>> without issue even after sitting for many years.
>>
>> Elmos will have disintegrated rubber rollers, Pageants will almost
>> certainly have sound or motor problems, and Bell and Howells will have
>> cracked worm gears.
>>
>> This isn’t to say that you shouldn’t remove and clean all rollers and go
>> over the entire film path, but an Eiki that has been sitting is probably ok
>> and won’t need much work. Most likely the focus mechanism will have
>> disintegrated and on older machines the belts can also turn to goo.
>>
>> Still, these machines should be serviced regularly if they’re expected to
>> last. Running a projector with minor mechanical issues can damage your
>> films AND your projector.
>>
>>
>>
>> On Sat, Jun 6, 2020 at 4:27 PM Dominic Angerame <
>> dominic.anger...@gmail.com> wrote:
>>
>>> Seek and you will find. I have been able to purchase many in good
>>> working condition. Postage is a problem and trust little on Ebay…most have
>>> never used the one’s they are selling. I have acquired most of my equipment
>>> enough for two complete benches etc by constantly looking and carefully,
>>> very carefully looking on Ebay.
>>>
>>> Dominic
>>>
>>> > On Jun 6, 2020, at 2:13 PM, Scott Dorsey  wrote:
>>> >
>>> > The problem with those freebies is that they aren't free.  People get
>>> them,
>>> > they don't want to pay to have them cleaned and lubed before they use
>>> them,
>>> > and then they wreck the cams in an hour of using them dry.  Budget
>>> maybe
>>> > $200 to $300 to have a free projector put into condition to use.
>>> >
>>> > Please do not apply power to a projector that has been on the shelf for
>>> > decades.
>>> > --scott
>>> >
>>> > ___
>>> > FrameWorks mailing list
>>> > FrameWorks@jonasmekasfilms.com
>>> > https://mailman-mail5.webfaction.com/listinfo/frameworks
>>>
>>> ___
>>> FrameWorks mailing list
>>> FrameWorks@jonasmekasfilms.com
>>> https://mailman-mail5.webfaction.com/listinfo/frameworks
>>>
>> --
>> Julian Antos
>> Chicago Film Society
>> www.chicagofilmsociety.org 
>> 773 827 8991 <(773)%20827-8991>
>>
>> ___
>> FrameWorks mailing list
>> FrameWorks@jonasmekasfilms.com
>> https://mailman-mail5.webfaction.com/listinfo/frameworks
>>
> ___
> FrameWorks mailing list
> FrameWorks@jonasmekasfilms.com
> https://mailman-mail5.webfaction.com/listinfo/frameworks
>
___
FrameWorks mailing list
FrameWorks@jonasmekasfilms.com
https://mailman-mail5.webfaction.com/listinfo/frameworks

Re: [Frameworks] 16mm Film Projector

[Scott Dorsey]

> How would I go about repairing it and/or figuring out what=E2=80=99s wrong =
> with it?

I am assuming that there is nothing wrong with it, that it is perfectly fine
and just needs maintenance.  If it needs repair, that is a different matter.

Most projectors have service manuals available which will describe how to do
the standard cleaning and lubrication, and if you are lucky that is all you
will need.  Eikis are more prone than most for the lube to really glop up
to the point where it needs total dissassembly and cleaning with naptha rather
than just the cleaning and lube procedure in the manual.  That quickly runs
into time.

As Julian noted, most Bell and Howell 500-series projectors have a worm gear 
which is made of a material that is incompatible with the lubricants they
used, and which cracks.  A new worm gear is available for $20 from Urbanski.
It is an eight hour job to get the thing apart and back together.  I tend to
replace the bearings too since after spending all that time you might as well
replace anything that might wear.  I'd replace the cam followers too if I could
get them, but I can't.  Optech in Boston might; they have hoarded spare 
500-series parts for years.  300-series and 1500-series B projectors don't do 
this but they all have their own oddities.

As he mentioned, the urethane rollers on many Elmo models fail.  
New replacements are available.  They aren't cheap, but they aren't very
time consuming to replace and it's the time charges that will kill you.
This is also not a failure, it's a wear item that you expect to replace now
and then, just like you expect to put new brakes on your car.

If you would not be comfortable disassembling a manual transmission or you
think 3-in-1 oil is actually good for something, please, please have a tech
do the work for you.  These projectors are not being made any more and when
they get wrecked they aren't getting replaced.  Proper maintenance will keep
them running a long time.
--scott

___
FrameWorks mailing list
FrameWorks@jonasmekasfilms.com
https://mailman-mail5.webfaction.com/listinfo/frameworks

Re: [Frameworks] 16mm Film Projector

[Chris Rodriguez]

How would I go about repairing it and/or figuring out what’s wrong with it?

On Sat, Jun 6, 2020 at 5:35 PM Julian Antos 
wrote:

> FWIW an Eiki SSL or similar would seems to be the most likely to work
> without issue even after sitting for many years.
>
> Elmos will have disintegrated rubber rollers, Pageants will almost
> certainly have sound or motor problems, and Bell and Howells will have
> cracked worm gears.
>
> This isn’t to say that you shouldn’t remove and clean all rollers and go
> over the entire film path, but an Eiki that has been sitting is probably ok
> and won’t need much work. Most likely the focus mechanism will have
> disintegrated and on older machines the belts can also turn to goo.
>
> Still, these machines should be serviced regularly if they’re expected to
> last. Running a projector with minor mechanical issues can damage your
> films AND your projector.
>
>
>
> On Sat, Jun 6, 2020 at 4:27 PM Dominic Angerame <
> dominic.anger...@gmail.com> wrote:
>
>> Seek and you will find. I have been able to purchase many in good working
>> condition. Postage is a problem and trust little on Ebay…most have never
>> used the one’s they are selling. I have acquired most of my equipment
>> enough for two complete benches etc by constantly looking and carefully,
>> very carefully looking on Ebay.
>>
>> Dominic
>>
>> > On Jun 6, 2020, at 2:13 PM, Scott Dorsey  wrote:
>> >
>> > The problem with those freebies is that they aren't free.  People get
>> them,
>> > they don't want to pay to have them cleaned and lubed before they use
>> them,
>> > and then they wreck the cams in an hour of using them dry.  Budget maybe
>> > $200 to $300 to have a free projector put into condition to use.
>> >
>> > Please do not apply power to a projector that has been on the shelf for
>> > decades.
>> > --scott
>> >
>> > ___
>> > FrameWorks mailing list
>> > FrameWorks@jonasmekasfilms.com
>> > https://mailman-mail5.webfaction.com/listinfo/frameworks
>>
>> ___
>> FrameWorks mailing list
>> FrameWorks@jonasmekasfilms.com
>> https://mailman-mail5.webfaction.com/listinfo/frameworks
>>
> --
> Julian Antos
> Chicago Film Society
> www.chicagofilmsociety.org 
> 773 827 8991 <(773)%20827-8991>
>
> ___
> FrameWorks mailing list
> FrameWorks@jonasmekasfilms.com
> https://mailman-mail5.webfaction.com/listinfo/frameworks
>
___
FrameWorks mailing list
FrameWorks@jonasmekasfilms.com
https://mailman-mail5.webfaction.com/listinfo/frameworks

Re: [Frameworks] 16mm Film Projector

[Julian Antos]

FWIW an Eiki SSL or similar would seems to be the most likely to work
without issue even after sitting for many years.

Elmos will have disintegrated rubber rollers, Pageants will almost
certainly have sound or motor problems, and Bell and Howells will have
cracked worm gears.

This isn’t to say that you shouldn’t remove and clean all rollers and go
over the entire film path, but an Eiki that has been sitting is probably ok
and won’t need much work. Most likely the focus mechanism will have
disintegrated and on older machines the belts can also turn to goo.

Still, these machines should be serviced regularly if they’re expected to
last. Running a projector with minor mechanical issues can damage your
films AND your projector.



On Sat, Jun 6, 2020 at 4:27 PM Dominic Angerame 
wrote:

> Seek and you will find. I have been able to purchase many in good working
> condition. Postage is a problem and trust little on Ebay…most have never
> used the one’s they are selling. I have acquired most of my equipment
> enough for two complete benches etc by constantly looking and carefully,
> very carefully looking on Ebay.
>
> Dominic
>
> > On Jun 6, 2020, at 2:13 PM, Scott Dorsey  wrote:
> >
> > The problem with those freebies is that they aren't free.  People get
> them,
> > they don't want to pay to have them cleaned and lubed before they use
> them,
> > and then they wreck the cams in an hour of using them dry.  Budget maybe
> > $200 to $300 to have a free projector put into condition to use.
> >
> > Please do not apply power to a projector that has been on the shelf for
> > decades.
> > --scott
> >
> > ___
> > FrameWorks mailing list
> > FrameWorks@jonasmekasfilms.com
> > https://mailman-mail5.webfaction.com/listinfo/frameworks
>
> ___
> FrameWorks mailing list
> FrameWorks@jonasmekasfilms.com
> https://mailman-mail5.webfaction.com/listinfo/frameworks
>
-- 
Julian Antos
Chicago Film Society
www.chicagofilmsociety.org 
773 827 8991 <(773)%20827-8991>
___
FrameWorks mailing list
FrameWorks@jonasmekasfilms.com
https://mailman-mail5.webfaction.com/listinfo/frameworks

Re: [Frameworks] 16mm Film Projector

[Dominic Angerame]

Seek and you will find. I have been able to purchase many in good working 
condition. Postage is a problem and trust little on Ebay…most have never used 
the one’s they are selling. I have acquired most of my equipment enough for two 
complete benches etc by constantly looking and carefully, very carefully 
looking on Ebay. 

Dominic

> On Jun 6, 2020, at 2:13 PM, Scott Dorsey  wrote:
> 
> The problem with those freebies is that they aren't free.  People get them,
> they don't want to pay to have them cleaned and lubed before they use them,
> and then they wreck the cams in an hour of using them dry.  Budget maybe
> $200 to $300 to have a free projector put into condition to use. 
> 
> Please do not apply power to a projector that has been on the shelf for
> decades.
> --scott
> 
> ___
> FrameWorks mailing list
> FrameWorks@jonasmekasfilms.com
> https://mailman-mail5.webfaction.com/listinfo/frameworks

___
FrameWorks mailing list
FrameWorks@jonasmekasfilms.com
https://mailman-mail5.webfaction.com/listinfo/frameworks

Re: [Frameworks] 16mm Film Projector

[Scott Dorsey]

The problem with those freebies is that they aren't free.  People get them,
they don't want to pay to have them cleaned and lubed before they use them,
and then they wreck the cams in an hour of using them dry.  Budget maybe
$200 to $300 to have a free projector put into condition to use. 

Please do not apply power to a projector that has been on the shelf for
decades.
--scott

___
FrameWorks mailing list
FrameWorks@jonasmekasfilms.com
https://mailman-mail5.webfaction.com/listinfo/frameworks

Re: [Frameworks] 16mm Film Projector

[Francisco Torres]

Bud: Credit is a sacred trust. It's what our free society was founded
on! Do you think they give a damn about their bills in Russia? [Otto,
dozing , does not answer] I said, "Do you think they give a damn about
their bills in Russia?"
Otto Maddox (wakes up): They don't pay bills in Russia. It's all free!
Bud: Free, my ass. What are you, a fuckin' Commie?
Otto Maddox: No, I ain't no Commie!
Bud: I don't want no Commies in my car!... No Christians, either!


2020-06-06 16:43 GMT-04:00, Francisco Torres :
> yeah but those cost MONEY. i mean freebies! nothing beeter than a
> freebie. as JK Galbraith said in his nobel prize (price?) speech- ''
> you cant compete with free""
>
> 2020-06-06 10:39 GMT-04:00, Christopher Ball :
>> I often see them in 2nd hand stores, pawn shops, or army surplus stores
>>
>> On Sun, May 31, 2020 at 8:35 PM Francisco Torres 
>> wrote:
>>
>>> ---universities and public libraries may have projectors for free.
>>>
>>> 2020-05-31 16:17 GMT-04:00, Scott Dorsey :
>>> > There are lots of free projectors out there... and people buy them but
>>> > then find out that a PM is going to cost them money.  Budget some
>>> > money
>>> > to clean up a projector that has not been run in decades.  Even if it
>>> > has
>>> > very few hours on it, it's going to need cleaning and lubrication and
>>> > rubber parts will be old and cracked.
>>> > --scott
>>> > ___
>>> > FrameWorks mailing list
>>> > FrameWorks@jonasmekasfilms.com
>>> > https://mailman-mail5.webfaction.com/listinfo/frameworks
>>> >
>>> ___
>>> FrameWorks mailing list
>>> FrameWorks@jonasmekasfilms.com
>>> https://mailman-mail5.webfaction.com/listinfo/frameworks
>>>
>>
>
___
FrameWorks mailing list
FrameWorks@jonasmekasfilms.com
https://mailman-mail5.webfaction.com/listinfo/frameworks

Re: [Frameworks] 16mm Film Projector

[Francisco Torres]

yeah but those cost MONEY. i mean freebies! nothing beeter than a
freebie. as JK Galbraith said in his nobel prize (price?) speech- ''
you cant compete with free""

2020-06-06 10:39 GMT-04:00, Christopher Ball :
> I often see them in 2nd hand stores, pawn shops, or army surplus stores
>
> On Sun, May 31, 2020 at 8:35 PM Francisco Torres 
> wrote:
>
>> ---universities and public libraries may have projectors for free.
>>
>> 2020-05-31 16:17 GMT-04:00, Scott Dorsey :
>> > There are lots of free projectors out there... and people buy them but
>> > then find out that a PM is going to cost them money.  Budget some money
>> > to clean up a projector that has not been run in decades.  Even if it
>> > has
>> > very few hours on it, it's going to need cleaning and lubrication and
>> > rubber parts will be old and cracked.
>> > --scott
>> > ___
>> > FrameWorks mailing list
>> > FrameWorks@jonasmekasfilms.com
>> > https://mailman-mail5.webfaction.com/listinfo/frameworks
>> >
>> ___
>> FrameWorks mailing list
>> FrameWorks@jonasmekasfilms.com
>> https://mailman-mail5.webfaction.com/listinfo/frameworks
>>
>
___
FrameWorks mailing list
FrameWorks@jonasmekasfilms.com
https://mailman-mail5.webfaction.com/listinfo/frameworks

Re: [Frameworks] 16mm Film Projector

[Christopher Ball]

I often see them in 2nd hand stores, pawn shops, or army surplus stores

On Sun, May 31, 2020 at 8:35 PM Francisco Torres 
wrote:

> ---universities and public libraries may have projectors for free.
>
> 2020-05-31 16:17 GMT-04:00, Scott Dorsey :
> > There are lots of free projectors out there... and people buy them but
> > then find out that a PM is going to cost them money.  Budget some money
> > to clean up a projector that has not been run in decades.  Even if it has
> > very few hours on it, it's going to need cleaning and lubrication and
> > rubber parts will be old and cracked.
> > --scott
> > ___
> > FrameWorks mailing list
> > FrameWorks@jonasmekasfilms.com
> > https://mailman-mail5.webfaction.com/listinfo/frameworks
> >
> ___
> FrameWorks mailing list
> FrameWorks@jonasmekasfilms.com
> https://mailman-mail5.webfaction.com/listinfo/frameworks
>
___
FrameWorks mailing list
FrameWorks@jonasmekasfilms.com
https://mailman-mail5.webfaction.com/listinfo/frameworks

Re: [Frameworks] 16mm Film Projector

[Francisco Torres]

---universities and public libraries may have projectors for free.

2020-05-31 16:17 GMT-04:00, Scott Dorsey :
> There are lots of free projectors out there... and people buy them but
> then find out that a PM is going to cost them money.  Budget some money
> to clean up a projector that has not been run in decades.  Even if it has
> very few hours on it, it's going to need cleaning and lubrication and
> rubber parts will be old and cracked.
> --scott
> ___
> FrameWorks mailing list
> FrameWorks@jonasmekasfilms.com
> https://mailman-mail5.webfaction.com/listinfo/frameworks
>
___
FrameWorks mailing list
FrameWorks@jonasmekasfilms.com
https://mailman-mail5.webfaction.com/listinfo/frameworks

Re: [Frameworks] 16mm Film Projector

[Scott Dorsey]

There are lots of free projectors out there... and people buy them but
then find out that a PM is going to cost them money.  Budget some money
to clean up a projector that has not been run in decades.  Even if it has
very few hours on it, it's going to need cleaning and lubrication and
rubber parts will be old and cracked.
--scott
___
FrameWorks mailing list
FrameWorks@jonasmekasfilms.com
https://mailman-mail5.webfaction.com/listinfo/frameworks

Re: [Frameworks] 16mm Film Projector

[Chris Rodriguez]

Interesting, I’ll have to try that!On May 31, 2020, at 1:30 PM, Francisco Torres  wrote:hope you find one soonsometimes public / private schools have some lingering in AV roomsgathering dust that they are eager to get rid of.some people i know have gotten theirs that way after a few phone calls.2020-05-30 22:22 GMT-04:00, Chris Rodriguez :I saw the post you’re talking about, he needed to get rid of it asap and Iwasn’t in NYC so it didn’t work out :/On Sat, May 30, 2020 at 9:19 PM Francisco Torres wrote:a recent thread here  read ''Free Siemens 16mm projector (NYC) ''2020-05-30 21:49 GMT-04:00, Chris Rodriguez:Hey everyone,Im in the market for a 16 mm film projector but my budget is not superflexible, if anyone has one they want to get rid of, or if someone canpoint me toward some cheap equipment it’d be much appreciated. I’m notpicky about make or model, anything helps!Thanks,Chris Rodríguez___FrameWorks mailing listFrameWorks@jonasmekasfilms.comhttps://mailman-mail5.webfaction.com/listinfo/frameworks___FrameWorks mailing listFrameWorks@jonasmekasfilms.comhttps://mailman-mail5.webfaction.com/listinfo/frameworks___
FrameWorks mailing list
FrameWorks@jonasmekasfilms.com
https://mailman-mail5.webfaction.com/listinfo/frameworks

Re: [Frameworks] 16mm Film Projector

[Chris Rodriguez]

Interesting, I’ll have to look into that!

On Sun, May 31, 2020 at 1:31 PM Francisco Torres 
wrote:

> hope you find one soon
> sometimes public / private schools have some lingering in AV rooms
> gathering dust that they are eager to get rid of.
> some people i know have gotten theirs that way after a few phone calls.
>
> 2020-05-30 22:22 GMT-04:00, Chris Rodriguez :
> > I saw the post you’re talking about, he needed to get rid of it asap and
> I
> > wasn’t in NYC so it didn’t work out :/
> >
> > On Sat, May 30, 2020 at 9:19 PM Francisco Torres 
> > wrote:
> >
> >> a recent thread here  read ''Free Siemens 16mm projector (NYC) ''
> >>
> >> 2020-05-30 21:49 GMT-04:00, Chris Rodriguez
> >> :
> >> > Hey everyone,
> >> >
> >> > Im in the market for a 16 mm film projector but my budget is not super
> >> > flexible, if anyone has one they want to get rid of, or if someone can
> >> > point me toward some cheap equipment it’d be much appreciated. I’m not
> >> > picky about make or model, anything helps!
> >> >
> >> > Thanks,
> >> >
> >> > Chris Rodríguez
> >> >
> >> ___
> >> FrameWorks mailing list
> >> FrameWorks@jonasmekasfilms.com
> >> https://mailman-mail5.webfaction.com/listinfo/frameworks
> >>
> >
> ___
> FrameWorks mailing list
> FrameWorks@jonasmekasfilms.com
> https://mailman-mail5.webfaction.com/listinfo/frameworks
>
___
FrameWorks mailing list
FrameWorks@jonasmekasfilms.com
https://mailman-mail5.webfaction.com/listinfo/frameworks

Re: [Frameworks] 16mm Film Projector

[Francisco Torres]

hope you find one soon
sometimes public / private schools have some lingering in AV rooms
gathering dust that they are eager to get rid of.
some people i know have gotten theirs that way after a few phone calls.

2020-05-30 22:22 GMT-04:00, Chris Rodriguez :
> I saw the post you’re talking about, he needed to get rid of it asap and I
> wasn’t in NYC so it didn’t work out :/
>
> On Sat, May 30, 2020 at 9:19 PM Francisco Torres 
> wrote:
>
>> a recent thread here  read ''Free Siemens 16mm projector (NYC) ''
>>
>> 2020-05-30 21:49 GMT-04:00, Chris Rodriguez
>> :
>> > Hey everyone,
>> >
>> > Im in the market for a 16 mm film projector but my budget is not super
>> > flexible, if anyone has one they want to get rid of, or if someone can
>> > point me toward some cheap equipment it’d be much appreciated. I’m not
>> > picky about make or model, anything helps!
>> >
>> > Thanks,
>> >
>> > Chris Rodríguez
>> >
>> ___
>> FrameWorks mailing list
>> FrameWorks@jonasmekasfilms.com
>> https://mailman-mail5.webfaction.com/listinfo/frameworks
>>
>
___
FrameWorks mailing list
FrameWorks@jonasmekasfilms.com
https://mailman-mail5.webfaction.com/listinfo/frameworks

Re: [Frameworks] 16mm Film Projector

[Chris Rodriguez]

I saw the post you’re talking about, he needed to get rid of it asap and I
wasn’t in NYC so it didn’t work out :/

On Sat, May 30, 2020 at 9:19 PM Francisco Torres 
wrote:

> a recent thread here  read ''Free Siemens 16mm projector (NYC) ''
>
> 2020-05-30 21:49 GMT-04:00, Chris Rodriguez :
> > Hey everyone,
> >
> > Im in the market for a 16 mm film projector but my budget is not super
> > flexible, if anyone has one they want to get rid of, or if someone can
> > point me toward some cheap equipment it’d be much appreciated. I’m not
> > picky about make or model, anything helps!
> >
> > Thanks,
> >
> > Chris Rodríguez
> >
> ___
> FrameWorks mailing list
> FrameWorks@jonasmekasfilms.com
> https://mailman-mail5.webfaction.com/listinfo/frameworks
>
___
FrameWorks mailing list
FrameWorks@jonasmekasfilms.com
https://mailman-mail5.webfaction.com/listinfo/frameworks

Re: [Frameworks] 16mm Film Projector

[Francisco Torres]

a recent thread here  read ''Free Siemens 16mm projector (NYC) ''

2020-05-30 21:49 GMT-04:00, Chris Rodriguez :
> Hey everyone,
>
> Im in the market for a 16 mm film projector but my budget is not super
> flexible, if anyone has one they want to get rid of, or if someone can
> point me toward some cheap equipment it’d be much appreciated. I’m not
> picky about make or model, anything helps!
>
> Thanks,
>
> Chris Rodríguez
>
___
FrameWorks mailing list
FrameWorks@jonasmekasfilms.com
https://mailman-mail5.webfaction.com/listinfo/frameworks

[Frameworks] 16mm Film Projector

[Chris Rodriguez]

Hey everyone,

Im in the market for a 16 mm film projector but my budget is not super
flexible, if anyone has one they want to get rid of, or if someone can
point me toward some cheap equipment it’d be much appreciated. I’m not
picky about make or model, anything helps!

Thanks,

Chris Rodríguez
___
FrameWorks mailing list
FrameWorks@jonasmekasfilms.com
https://mailman-mail5.webfaction.com/listinfo/frameworks