[Frameworks] VISIONS 09.16 | NORTHERN LIGHT

2016-08-26 Thread contact 
In collaboration with l 
a
 lumière collective 
,
 

 VISIONS 

 presents
NORTHERN LIGHT : A programme of contemporary Canadian cinema.
-
Leslie Supnet | Smoke | Digital | 2mins
Leslie Supnet | Second Sun | 8mm | 3mins
Ralitsa Doncheva | Baba Dana Talks to the Wolves | 16mm | 11mins
Aaron Zeghers | Living on the Edge | 8mm | 4mins
Parastoo Anoushahpour, Faraz Anoushahpour, & Ryan Ferko | Bunte Kuh | Digital | 
6mins
Karl Lemieux & David Bryant | Quiet Zone | 16mm | 14mins
Steven Woloshen | Crossing Victoria | 35mm | 4mins
Solomon Nagler | Notes on Gesture | 16mm | 4mins
Rhayne Vermette | J. Werier | 16mm | 4mins
Chris Kennedy | Tamalpais | 16mm | 14mins
Malena Szlam | Lunar Almanac | 16mm | 4mins
Emilie Serri | No time for tomorrow | Digital | 5mins

Artists in attendance | Digital Programme

01 
.09.16
 |  
20h00
  | $7 


[la lumière 

 | 7080, rue Alexandra, #506, Montréal]___
FrameWorks mailing list
FrameWorks@jonasmekasfilms.com
https://mailman-mail5.webfaction.com/listinfo/frameworks

Re: [Frameworks] oxberry 35mm repair?

2016-08-26 Thread Jeff Kreines 
My guess is the damage is coming from the shuttle. Try to run film until there 
is damage and before I threading it mark all points of the film path on the 
film with a Sharpie.  The Oxberry and Acme shuttles are very precise. Make sure 
your film is the right pitch (.1866 with BH perfs, probably). 

Unless you have one of those weird Oxberrys made for still film recorders.  
These had small square mags and are designed for still camera film. 

What kind of film recorder is it?

Jeff Kreines
Kinetta
j...@kinetta.com
kinetta.com

> On Aug 26, 2016, at 3:32 PM, Scott Stark  wrote:
> 
> Hi, I have an old Oxberry 35mm camera – not really a movie camera, it’s part 
> of a film recorder setup – that’s been breaking sprockets lately. I’ve been 
> unable to see what’s causing it. Can anyone recommend a repair person who 
> might be able to troubleshoot it? Thanks!
>  
> Scott Stark
> scottstark.com
> Experimental Response Cinema
> Flicker
>  
> ___
> FrameWorks mailing list
> FrameWorks@jonasmekasfilms.com
> https://mailman-mail5.webfaction.com/listinfo/frameworks
___
FrameWorks mailing list
FrameWorks@jonasmekasfilms.com
https://mailman-mail5.webfaction.com/listinfo/frameworks

[Frameworks] Bolex and/or car mount rental ABQ, NM?

2016-08-26 Thread laska jimsen 
Hi all,

Anyone know of a place to rent a Bolex (or maybe you have one to rent) in
Albuquerque? Looking for one around Labor Day weekend.

Also looking for a way to mount it in a car window. . .

Thanks!

Laska
___
FrameWorks mailing list
FrameWorks@jonasmekasfilms.com
https://mailman-mail5.webfaction.com/listinfo/frameworks

[Frameworks] oxberry 35mm repair?

2016-08-26 Thread Scott Stark 
Hi, I have an old Oxberry 35mm camera - not really a movie camera, it's part
of a film recorder setup - that's been breaking sprockets lately. I've been
unable to see what's causing it. Can anyone recommend a repair person who
might be able to troubleshoot it? Thanks!

 

Scott Stark

scottstark.com  

Experimental Response Cinema  

Flicker  

 

___
FrameWorks mailing list
FrameWorks@jonasmekasfilms.com
https://mailman-mail5.webfaction.com/listinfo/frameworks

Re: [Frameworks] oxberry 35mm repair?

2016-08-26 Thread Scott Stark 
Hi Jeff, yes it’s one of those “weird” Oxberrys made for still film recorders, 
a Matrix PCS. So yes it does have those 100’ magazines. Do you think the 
“pitch” of the sprockets is different than what it expects? I’ve been using it 
for years and only recently has this become a problem.

 

I have tried to figure out where it’s breaking, but it happens infrequently and 
is hard to catch – maybe once every 5 or 10 feet.

 

Thanks.

 

Scott Stark

  scottstark.com

  Experimental Response Cinema

  Flicker

 

From: FrameWorks [mailto:frameworks-boun...@jonasmekasfilms.com] On Behalf Of 
Jeff Kreines
Sent: Friday, August 26, 2016 4:48 PM
To: Experimental Film Discussion List 
Subject: Re: [Frameworks] oxberry 35mm repair?

 

My guess is the damage is coming from the shuttle. Try to run film until there 
is damage and before I threading it mark all points of the film path on the 
film with a Sharpie.  The Oxberry and Acme shuttles are very precise. Make sure 
your film is the right pitch (.1866 with BH perfs, probably). 

 

Unless you have one of those weird Oxberrys made for still film recorders.  
These had small square mags and are designed for still camera film. 

 

What kind of film recorder is it?

Jeff Kreines

Kinetta

j...@kinetta.com  

kinetta.com  


On Aug 26, 2016, at 3:32 PM, Scott Stark  > wrote:

Hi, I have an old Oxberry 35mm camera – not really a movie camera, it’s part of 
a film recorder setup – that’s been breaking sprockets lately. I’ve been unable 
to see what’s causing it. Can anyone recommend a repair person who might be 
able to troubleshoot it? Thanks!

 

Scott Stark

scottstark.com  

Experimental Response Cinema  

Flicker  

 

___
FrameWorks mailing list
FrameWorks@jonasmekasfilms.com  
https://mailman-mail5.webfaction.com/listinfo/frameworks

___
FrameWorks mailing list
FrameWorks@jonasmekasfilms.com
https://mailman-mail5.webfaction.com/listinfo/frameworks

Re: [Frameworks] oxberry 35mm repair?

2016-08-26 Thread Jeff Kreines 
Scott:

What kind of film have you been running?

4 perf or 8 perf shuttle?

Jeff Kreines
Kinetta
j...@kinetta.com
kinetta.com

> On Aug 26, 2016, at 5:26 PM, Scott Stark  wrote:
> 
> Hi Jeff, yes it’s one of those “weird” Oxberrys made for still film 
> recorders, a Matrix PCS. So yes it does have those 100’ magazines. Do you 
> think the “pitch” of the sprockets is different than what it expects? I’ve 
> been using it for years and only recently has this become a problem.
>  
> I have tried to figure out where it’s breaking, but it happens infrequently 
> and is hard to catch – maybe once every 5 or 10 feet.
>  
> Thanks.
>  
> Scott Stark
> scottstark.com
> Experimental Response Cinema
> Flicker
>  
> From: FrameWorks [mailto:frameworks-boun...@jonasmekasfilms.com] On Behalf Of 
> Jeff Kreines
> Sent: Friday, August 26, 2016 4:48 PM
> To: Experimental Film Discussion List 
> Subject: Re: [Frameworks] oxberry 35mm repair?
>  
> My guess is the damage is coming from the shuttle. Try to run film until 
> there is damage and before I threading it mark all points of the film path on 
> the film with a Sharpie.  The Oxberry and Acme shuttles are very precise. 
> Make sure your film is the right pitch (.1866 with BH perfs, probably). 
>  
> Unless you have one of those weird Oxberrys made for still film recorders.  
> These had small square mags and are designed for still camera film. 
>  
> What kind of film recorder is it?
> 
> Jeff Kreines
> Kinetta
> j...@kinetta.com
> kinetta.com
> 
> On Aug 26, 2016, at 3:32 PM, Scott Stark  wrote:
> 
> Hi, I have an old Oxberry 35mm camera – not really a movie camera, it’s part 
> of a film recorder setup – that’s been breaking sprockets lately. I’ve been 
> unable to see what’s causing it. Can anyone recommend a repair person who 
> might be able to troubleshoot it? Thanks!
>  
> Scott Stark
> scottstark.com
> Experimental Response Cinema
> Flicker
>  
> ___
> FrameWorks mailing list
> FrameWorks@jonasmekasfilms.com
> https://mailman-mail5.webfaction.com/listinfo/frameworks
> ___
> FrameWorks mailing list
> FrameWorks@jonasmekasfilms.com
> https://mailman-mail5.webfaction.com/listinfo/frameworks
___
FrameWorks mailing list
FrameWorks@jonasmekasfilms.com
https://mailman-mail5.webfaction.com/listinfo/frameworks

Re: [Frameworks] oxberry 35mm repair?

2016-08-26 Thread Scott Stark 
Lately, Kodak 5207, and 8-perf shuttle. 

 

Scott Stark

  scottstark.com

  Experimental Response Cinema

  Flicker

 

From: FrameWorks [mailto:frameworks-boun...@jonasmekasfilms.com] On Behalf Of 
Jeff Kreines
Sent: Friday, August 26, 2016 5:49 PM
To: Experimental Film Discussion List 
Subject: Re: [Frameworks] oxberry 35mm repair?

 

Scott:

 

What kind of film have you been running?

 

4 perf or 8 perf shuttle?

Jeff Kreines

Kinetta

j...@kinetta.com  

kinetta.com  


On Aug 26, 2016, at 5:26 PM, Scott Stark  > wrote:

Hi Jeff, yes it’s one of those “weird” Oxberrys made for still film recorders, 
a Matrix PCS. So yes it does have those 100’ magazines. Do you think the 
“pitch” of the sprockets is different than what it expects? I’ve been using it 
for years and only recently has this become a problem.

 

I have tried to figure out where it’s breaking, but it happens infrequently and 
is hard to catch – maybe once every 5 or 10 feet.

 

Thanks.

 

Scott Stark

scottstark.com  

Experimental Response Cinema  

Flicker  

 

From: FrameWorks [mailto:frameworks-boun...@jonasmekasfilms.com] On Behalf Of 
Jeff Kreines
Sent: Friday, August 26, 2016 4:48 PM
To: Experimental Film Discussion List  >
Subject: Re: [Frameworks] oxberry 35mm repair?

 

My guess is the damage is coming from the shuttle. Try to run film until there 
is damage and before I threading it mark all points of the film path on the 
film with a Sharpie.  The Oxberry and Acme shuttles are very precise. Make sure 
your film is the right pitch (.1866 with BH perfs, probably). 

 

Unless you have one of those weird Oxberrys made for still film recorders.  
These had small square mags and are designed for still camera film. 

 

What kind of film recorder is it?

Jeff Kreines

Kinetta

j...@kinetta.com  

kinetta.com  


On Aug 26, 2016, at 3:32 PM, Scott Stark  > wrote:

Hi, I have an old Oxberry 35mm camera – not really a movie camera, it’s part of 
a film recorder setup – that’s been breaking sprockets lately. I’ve been unable 
to see what’s causing it. Can anyone recommend a repair person who might be 
able to troubleshoot it? Thanks!

 

Scott Stark

scottstark.com  

Experimental Response Cinema  

Flicker  

 

___
FrameWorks mailing list
FrameWorks@jonasmekasfilms.com  
https://mailman-mail5.webfaction.com/listinfo/frameworks

___
FrameWorks mailing list
FrameWorks@jonasmekasfilms.com  
https://mailman-mail5.webfaction.com/listinfo/frameworks

___
FrameWorks mailing list
FrameWorks@jonasmekasfilms.com
https://mailman-mail5.webfaction.com/listinfo/frameworks

Re: [Frameworks] oxberry 35mm repair?

2016-08-26 Thread Scott Dorsey 
Those are intended for a KS perf short pitch film, I believe.

What stock are you running and when did it last get a cleaning and lube?
--scott
___
FrameWorks mailing list
FrameWorks@jonasmekasfilms.com
https://mailman-mail5.webfaction.com/listinfo/frameworks