man lagg
The driver currently supports the aggregation protocols failover (the
default), fec, lacp, loadbalance, roundrobin, and none. The protocols
determine which ports are used for outgoing traffic and whether a spe-
cific port accepts incoming traffic. The interface link state is used to
validate if the port is active or not.
loadbalance Balances outgoing traffic across the active ports based on
hashed protocol header information and accepts incoming
traffic from any active port. This is a static setup and
does not negotiate aggregation with the peer or exchange
frames to monitor the link. The hash includes the Ethernet
source and destination address, and, if available, the VLAN
tag, and the IP source and destination address.
The following example uses an active failover interface to set up roaming
between wired and wireless networks using two network devices. Whenever
the wired master interface is unplugged, the wireless failover device
will be used:
# ifconfig em0 up
# ifconfig ath0 nwid my_net up
# ifconfig lagg0 laggproto failover laggport em0 laggport ath0 \
192.168.1.1 netmask 255.255.255.0
Bom modifique e efetue testes para ver se isto resolve seu problema.
2009/4/25 levitl...@hotmail.com:
Pessoal, tem como unir a saída de dois rádios em um servidor FreeBSD e saír
apenas um link. Lembrando que
é um link de rede local.
_
Emoticons e Winks super diferentes para o Messenger. Baixe agora, é grátis!
http://specials.br.msn.com/ilovemessenger/pacotes.aspx
-
Histórico: http://www.fug.com.br/historico/html/freebsd/
Sair da lista: https://www.fug.com.br/mailman/listinfo/freebsd
--
- = - = - = - = - = - = - = - = - = -
. Of course it runsWilliam David Armstrong
|== Bio Systems Security Networking
' FreeBSD MSN / GT biosystems gmail . com
http://biosystems.ath.cx:8080/ http://biosystems.broker.freenet6.net/
--
-
Histórico: http://www.fug.com.br/historico/html/freebsd/
Sair da lista: https://www.fug.com.br/mailman/listinfo/freebsd
