[FreeBSD] Re: Nagios ile server monitoring hakkında
Merhabalar; Nagios 3.0.5 'i kurduğumuzda kurduğunuz makinayı ilk host olarak ve 8 tanede servisi otomatik olarak ekliyor.Burada bende diğer makinalaım için enderunixin belgesindeki .cfg dosyalarını objects altında create etim .Bu cg dosyalınırınıda nagiosta aktif ettim .Fakat konfigurasyo hatası veriyor.Burada benim sadece bir linux makinanın ping,ssh servisini uzaktan izlemem için gerekli minumum conf nedir.Artık ben gruplamdanda geçtim. 2008/11/28 ibrahim abanuzoglu <[EMAIL PROTECTED]> > > > Merhaba arkadaşlar; >> >> >> Sitede bulunan Nagios dökümanı ve netdeki dökümanlardan yararlanarak >> Nagiosu aşağıdaki çıktıda görüldüğü gibi başarılı bir şekilde kurdum.Temel >> olarak 3 adet linux 10 adet freebsd makinamdaki ; >> >> -ssh >> -ping >> -diskusage etc. >> >> gibi servisleri monitor etmek istiyorum .Bunun için /usr/local/nagios/etc >> içindeki nagios.conf da /usr/local/nagios/etc/objects içinde >> tanımlayacağımız .cfg dosyalarının yolunu gösterdim.Burada enderunixteki >> dökümandanda her bir servisi ,hosru,hostgrubu,dökümandaki tüm .cfg >> dosyalarını tanımladım.Ancak daha sonra /usr/local/nagios/bin/nagios -v >> /usr/local/nagios/etc/nagios.cfg komutuyla kontrol ettiğimde hep config >> error alıyorum.Burada NRPE ve libexec içindeki chechk_ssh parametresinin >> çalışıtırlması gibi iki yöntemden bahsediliyor.Bunlardan temel olarak >> hangisini kullanmayalım ve yanıldığım nokta hangisidir.Birde başarılı bir >> config yaptığımızda webde direkt görebiliyormuyum.Bunun için extra bir durum >> varmıdır. >> >> >> [EMAIL PROTECTED]:/usr/local/nagios/etc/objects# >> /usr/local/nagios/bin/nagios -v /usr/local/nagios/etc/nagios.cfg >> >> Nagios 3.0.5 >> Copyright (c) 1999-2008 Ethan Galstad (http://www.nagios.org) >> Last Modified: 11-04-2008 >> License: GPL >> >> Reading configuration data... >> >> Running pre-flight check on configuration data... >> >> Checking services... >> Checked 8 services. >> Checking hosts... >> Checked 1 hosts. >> Checking host groups... >> Checked 1 host groups. >> Checking service groups... >> Checked 0 service groups. >> Checking contacts... >> Checked 1 contacts. >> Checking contact groups... >> Checked 1 contact groups. >> Checking service escalations... >> Checked 0 service escalations. >> Checking service dependencies... >> Checked 0 service dependencies. >> Checking host escalations... >> Checked 0 host escalations. >> Checking host dependencies... >> Checked 0 host dependencies. >> Checking commands... >> Checked 24 commands. >> Checking time periods... >> Checked 5 time periods. >> Checking for circular paths between hosts... >> Checking for circular host and service dependencies... >> Checking global event handlers... >> Checking obsessive compulsive processor commands... >> Checking misc settings... >> >> Total Warnings: 0 >> Total Errors: 0 >> >> Things look okay - No serious problems were detected during the pre-flight >> check >> >> >> >> >> İyi çalışmalar >> >> >> >
[FreeBSD] Fwd: [FreeBSD-Announce] FreeBSD 6.4-RELEASE Available
Huzeyfe ONAL [EMAIL PROTECTED] http://www.lifeoverip.net Ag guvenligi listesine uye oldunuz mu? http://netsec.lifeoverip.net --- -- Forwarded message -- From: Ken Smith <[EMAIL PROTECTED]> Date: Fri, Nov 28, 2008 at 8:11 PM Subject: [FreeBSD-Announce] FreeBSD 6.4-RELEASE Available To: [EMAIL PROTECTED] The FreeBSD Release Engineering Team is pleased to announce the availability of FreeBSD 6.4-RELEASE. At this time 6.4-RELEASE is expected to be the last of the 6-STABLE releases. Some of the highlights: - New and much-improved NFS Lock Manager (NLM) client - Support for the Camellia cipher - boot loader changes allow, among other things, booting from USB devices and booting from GPT-labeled devices with GPT-enabled BIOSes - DVD install ISO images for amd64/i386 - KDE updated to 3.5.10, GNOME updated to 2.22.3 - Updates for BIND, sendmail, OpenPAM, and others For a complete list of new features and known problems, please see the online release notes and errata list, available at: http://www.FreeBSD.org/releases/6.4R/relnotes.html http://www.FreeBSD.org/releases/6.4R/errata.html For more information about FreeBSD release engineering activities, please see: http://www.FreeBSD.org/releng/ The FreeBSD Security Team intends to support 6.4-RELEASE until November 30th, 2010. Availability - FreeBSD 6.4-RELEASE is now available for the amd64, i386, pc98, and sparc64 architectures. The builds for the alpha architecture have not completed yet and will be announced later. FreeBSD 6.4-RELEASE can be installed from bootable ISO images or over the network; the required files can be downloaded via FTP or BitTorrent as described in the sections below. While some of the smaller FTP mirrors may not carry all architectures, they will all generally contain the more common ones, such as i386 and amd64. MD5 and SHA256 hashes for the release ISO images are included at the bottom of this message. The contents of the ISO images provided as part of the release has changed for most of the architectures. Using the i386 architecture as an example, there are ISO images named "bootonly", "disc1", "disc2", "disc3", "docs", and "dvd1". The "bootonly" image is suitable for booting a machine to do a network based installation using FTP or NFS. The "disc1", "disc2", and "disc3" images are CDROM-sized (700MB media) and are used to do a full installation that includes a basic set of packages and does not require network access to an FTP or NFS server during the installation. In addition, "disc1" supports booting into a "live CD-based filesystem" and system rescue mode. The "docs" image has all of the documentation for all supported languages. The "dvd1" image is DVD-sized and includes everything that is on the CDROM discs. So "dvd1" can be used to do a full installation that includes a basic set of packages, it has all of the documentation for all supported languages, and it can be used for booting into a "live CD-based filesystem" and system rescue mode. Most people will find that "disc1", "disc2" and "disc3" are all that are needed if their machine does not have a DVD-capable drive. For people with machines that do have a DVD-capable drive "dvd1" should be all that is required. If you intend to install ports from source instead of using the pre-built packages included with the release only "disc1" is needed. FreeBSD 6.4-RELEASE can also be purchased on CD-ROM from several vendors. One of the vendors that will be offering FreeBSD 6.4-based products is: ~ FreeBSD Mall, Inc.http://www.freebsdmall.com/ BitTorrent -- 6.4-RELEASE ISOs are available via BitTorrent. A collection of torrent files to download the images is available at: http://torrents.freebsd.org:8080/ FTP --- At the time of this announcement the following FTP sites have FreeBSD 6.4-RELEASE available. ftp://ftp.freebsd.org/pub/FreeBSD/ ftp://ftp3.freebsd.org/pub/FreeBSD/ ftp://ftp7.freebsd.org/pub/FreeBSD/ ftp://ftp9.freebsd.org/pub/FreeBSD/ ftp://ftp10.freebsd.org/pub/FreeBSD/ ftp://ftp12.freebsd.org/pub/FreeBSD/ ftp://ftp.at.freebsd.org/pub/FreeBSD/ ftp://ftp.cz.freebsd.org/pub/FreeBSD/ ftp://ftp.dk.freebsd.org/pub/FreeBSD/ ftp://ftp.fi.freebsd.org/pub/FreeBSD/ ftp://ftp.fr.freebsd.org/pub/FreeBSD/ ftp://ftp2.ie.freebsd.org/pub/FreeBSD/ ftp://ftp.se.freebsd.org/pub/FreeBSD/ ftp://ftp.si.freebsd.org/pub/FreeBSD/ ftp://ftp1.ru.freebsd.org/pub/FreeBSD/ ftp://ftp2.uk.freebsd.org/pub/FreeBSD/ ftp://ftp3.us.freebsd.org/pub/FreeBSD/ ftp://ftp7.us.freebsd.org/pub/FreeBSD/ ftp://ftp9.us.freebsd.org/pub/FreeBSD/ ftp://ftp11.us.freebsd.org/pub/FreeBSD/ However before trying these sites you may want to check your regional mirror(s) first by going to: ftp://ftp..FreeBSD.org/pub/FreeBSD Any additional mirror sites will be labeled ftp2, ftp3 and so on. More information about FreeBSD mirror sites can be found
Re: [FreeBSD] Nagios ile server monitoring hakkında
siz config check çıktısından da anlaşıldığı üzre1 host üzerinde 8 servisi (bunlar ssh pop3 imap smtp vs gibi servisler olabilir) kontrol edecek ve bu servis ile ilgili bilgileri 1 kişinin üye olduğu 1 host grubuna gönderecek şekilde yapılandırma yapmışsınız. öncelikle bu yapmak istediğiniz şey ile aynı mıdır? bunun ardından nagios u restart etmelisiniz ki bu değişiklikler etkin olsun. yanlış cfg dosyalarını include etmiş olabilir siniz. kontrol etmenizde fayda var. iyi çalışmalar... 28 Kasım 2008 Cuma 21:54 tarihinde ibrahim abanuzoglu <[EMAIL PROTECTED]> yazdı: > > >> Merhaba arkadaşlar; >> >> >> Sitede bulunan Nagios dökümanı ve netdeki dökümanlardan yararlanarak >> Nagiosu aşağıdaki çıktıda görüldüğü gibi başarılı bir şekilde kurdum.Temel >> olarak 3 adet linux 10 adet freebsd makinamdaki ; >> >> -ssh >> -ping >> -diskusage etc. >> >> gibi servisleri monitor etmek istiyorum .Bunun için /usr/local/nagios/etc >> içindeki nagios.conf da /usr/local/nagios/etc/objects içinde >> tanımlayacağımız .cfg dosyalarının yolunu gösterdim.Burada enderunixteki >> dökümandanda her bir servisi ,hosru,hostgrubu,dökümandaki tüm .cfg >> dosyalarını tanımladım.Ancak daha sonra /usr/local/nagios/bin/nagios -v >> /usr/local/nagios/etc/nagios.cfg komutuyla kontrol ettiğimde hep config >> error alıyorum.Burada NRPE ve libexec içindeki chechk_ssh parametresinin >> çalışıtırlması gibi iki yöntemden bahsediliyor.Bunlardan temel olarak >> hangisini kullanmayalım ve yanıldığım nokta hangisidir.Birde başarılı bir >> config yaptığımızda webde direkt görebiliyormuyum.Bunun için extra bir durum >> varmıdır. >> >> >> [EMAIL PROTECTED]:/usr/local/nagios/etc/objects# >> /usr/local/nagios/bin/nagios -v /usr/local/nagios/etc/nagios.cfg >> >> Nagios 3.0.5 >> Copyright (c) 1999-2008 Ethan Galstad (http://www.nagios.org) >> Last Modified: 11-04-2008 >> License: GPL >> >> Reading configuration data... >> >> Running pre-flight check on configuration data... >> >> Checking services... >> Checked 8 services. >> Checking hosts... >> Checked 1 hosts. >> Checking host groups... >> Checked 1 host groups. >> Checking service groups... >> Checked 0 service groups. >> Checking contacts... >> Checked 1 contacts. >> Checking contact groups... >> Checked 1 contact groups. >> Checking service escalations... >> Checked 0 service escalations. >> Checking service dependencies... >> Checked 0 service dependencies. >> Checking host escalations... >> Checked 0 host escalations. >> Checking host dependencies... >> Checked 0 host dependencies. >> Checking commands... >> Checked 24 commands. >> Checking time periods... >> Checked 5 time periods. >> Checking for circular paths between hosts... >> Checking for circular host and service dependencies... >> Checking global event handlers... >> Checking obsessive compulsive processor commands... >> Checking misc settings... >> >> Total Warnings: 0 >> Total Errors: 0 >> >> Things look okay - No serious problems were detected during the pre-flight >> check >> >> >> >> İyi çalışmalar >> > > -- İyi çalışmalar... Mesut GÜLNAZ
[FreeBSD] Nagios ile server monitoring hakkında
Merhaba arkadaşlar; > > > Sitede bulunan Nagios dökümanı ve netdeki dökümanlardan yararlanarak > Nagiosu aşağıdaki çıktıda görüldüğü gibi başarılı bir şekilde kurdum.Temel > olarak 3 adet linux 10 adet freebsd makinamdaki ; > > -ssh > -ping > -diskusage etc. > > gibi servisleri monitor etmek istiyorum .Bunun için /usr/local/nagios/etc > içindeki nagios.conf da /usr/local/nagios/etc/objects içinde > tanımlayacağımız .cfg dosyalarının yolunu gösterdim.Burada enderunixteki > dökümandanda her bir servisi ,hosru,hostgrubu,dökümandaki tüm .cfg > dosyalarını tanımladım.Ancak daha sonra /usr/local/nagios/bin/nagios -v > /usr/local/nagios/etc/nagios.cfg komutuyla kontrol ettiğimde hep config > error alıyorum.Burada NRPE ve libexec içindeki chechk_ssh parametresinin > çalışıtırlması gibi iki yöntemden bahsediliyor.Bunlardan temel olarak > hangisini kullanmayalım ve yanıldığım nokta hangisidir.Birde başarılı bir > config yaptığımızda webde direkt görebiliyormuyum.Bunun için extra bir durum > varmıdır. > > > [EMAIL PROTECTED]:/usr/local/nagios/etc/objects# > /usr/local/nagios/bin/nagios -v /usr/local/nagios/etc/nagios.cfg > > Nagios 3.0.5 > Copyright (c) 1999-2008 Ethan Galstad (http://www.nagios.org) > Last Modified: 11-04-2008 > License: GPL > > Reading configuration data... > > Running pre-flight check on configuration data... > > Checking services... > Checked 8 services. > Checking hosts... > Checked 1 hosts. > Checking host groups... > Checked 1 host groups. > Checking service groups... > Checked 0 service groups. > Checking contacts... > Checked 1 contacts. > Checking contact groups... > Checked 1 contact groups. > Checking service escalations... > Checked 0 service escalations. > Checking service dependencies... > Checked 0 service dependencies. > Checking host escalations... > Checked 0 host escalations. > Checking host dependencies... > Checked 0 host dependencies. > Checking commands... > Checked 24 commands. > Checking time periods... > Checked 5 time periods. > Checking for circular paths between hosts... > Checking for circular host and service dependencies... > Checking global event handlers... > Checking obsessive compulsive processor commands... > Checking misc settings... > > Total Warnings: 0 > Total Errors: 0 > > Things look okay - No serious problems were detected during the pre-flight > check > > > > > İyi çalışmalar > > >
Re: [FreeBSD] Squid ile https tunel engelleme
Merhaba arkadaşlar; Sitede bulunan Nagios dökümanı ve netdeki dökümanlardan yararlanarak Nagiosu aşağıdaki çıktıda görüldüğü gibi başarılı bir şekilde kurdum.Temel olarak 3 adet linux 10 adet freebsd makinamdaki ; -ssh -ping -diskusage etc. gibi servisleri monitor etmek istiyorum .Bunun için /usr/local/nagios/etc içindeki nagios.conf da /usr/local/nagios/etc/objects içinde tanımlayacağımız .cfg dosyalarının yolunu gösterdim.Burada enderunixteki dökümandanda her bir servisi ,hosru,hostgrubu,dökümandaki tüm .cfg dosyalarını tanımladım.Ancak daha sonra /usr/local/nagios/bin/nagios -v /usr/local/nagios/etc/nagios.cfg komutuyla kontrol ettiğimde hep config error alıyorum.Burada NRPE ve libexec içindeki chechk_ssh parametresinin çalışıtırlması gibi iki yöntemden bahsediliyor.Bunlardan temel olarak hangisini kullanmayalım ve yanıldığım nokta hangisidir.Birde başarılı bir config yaptığımızda webde direkt görebiliyormuyum.Bunun için extra bir durum varmıdır. [EMAIL PROTECTED]:/usr/local/nagios/etc/objects# /usr/local/nagios/bin/nagios -v /usr/local/nagios/etc/nagios.cfg Nagios 3.0.5 Copyright (c) 1999-2008 Ethan Galstad (http://www.nagios.org) Last Modified: 11-04-2008 License: GPL Reading configuration data... Running pre-flight check on configuration data... Checking services... Checked 8 services. Checking hosts... Checked 1 hosts. Checking host groups... Checked 1 host groups. Checking service groups... Checked 0 service groups. Checking contacts... Checked 1 contacts. Checking contact groups... Checked 1 contact groups. Checking service escalations... Checked 0 service escalations. Checking service dependencies... Checked 0 service dependencies. Checking host escalations... Checked 0 host escalations. Checking host dependencies... Checked 0 host dependencies. Checking commands... Checked 24 commands. Checking time periods... Checked 5 time periods. Checking for circular paths between hosts... Checking for circular host and service dependencies... Checking global event handlers... Checking obsessive compulsive processor commands... Checking misc settings... Total Warnings: 0 Total Errors: 0 Things look okay - No serious problems were detected during the pre-flight check İyi çalışmalar
Re: [FreeBSD] PF Load balance
Merhabalar, -443/https trafiginiz Squid uzerinden mi gidiyor? -Squid uzerinden gidiyorsa load balancign yaptiriyor musunuz? Eger Squid uzerinden gitmiyorsa PF'e asagidaki gibi bir kural yazmaniz yeterli olacaktir. Iki cikis arabiriminiz var ve siz HTTPS baglantilarinin ext_if0-ext_gw0 dan cikmasini istiyorsunuz. pass in quick log (all) on $int_if route-to($ext_if0 $ext_gw0) proto tcp from $ic_ag to any port 443 Huzeyfe ONAL [EMAIL PROTECTED] http://www.lifeoverip.net Ag guvenligi listesine uye oldunuz mu? http://netsec.lifeoverip.net --- 2008/11/28 Mehmet Zahid Öğrenç <[EMAIL PROTECTED]>: > Merhabalar, > > > > Varolan yapımda 2 adet adsl hat mevcut. Bu adsl leri PF kullanarak ikiside > aktif şekilde kullanabilmekteyim. Sorun banka sitelerine girmeye çalışırken > başlıyor. Squid de ne gibi bir ayar yapmam gerekli ki banka sitelerine yada > https kullacağı zaman tek bir adsl üzerinden çıkış yapsın. Tcp_outgoing > komutunu kullanıyorum fakat sorun hala devam ediyor. > > > > Kolay gelsin, > > Mehmet
[FreeBSD] PF Load balance
Merhabalar, Varolan yapımda 2 adet adsl hat mevcut. Bu adsl leri PF kullanarak ikiside aktif şekilde kullanabilmekteyim. Sorun banka sitelerine girmeye çalışırken başlıyor. Squid de ne gibi bir ayar yapmam gerekli ki banka sitelerine yada https kullacağı zaman tek bir adsl üzerinden çıkış yapsın. Tcp_outgoing komutunu kullanıyorum fakat sorun hala devam ediyor. Kolay gelsin, Mehmet
RE: [FreeBSD] bu dns hatası nedir?
Verdiginiz ikinci ipucunda smtproutes dan bahsetmis fakat bu dosyanin icerigi nasil olacak... www.domain.com mu mesela ? -Original Message- From: Afsin Taskiran [mailto:[EMAIL PROTECTED] Sent: Monday, August 01, 2005 8:44 PM To: freebsd@lists.enderunix.org Subject: Re: [FreeBSD] bu dns hatası nedir? Merhaba; Sanirim asagidaki ipuclari isinizi gorecektir. http://tips.enderunix.org/view.php?id=566&lang=tr http://tips.enderunix.org/view.php?id=567&lang=tr Selamlar Afşin Taşkıran On Mon, 2005-08-01 at 20:00 +0300, Mesut GÜLNAZ wrote: > web server olarak kulanılan ve hem reverse hemde A kaydı bulunan bu > webserver mail atmaya çalıştığında dns veriyor? nedeni ne > olabilir?ve nasıl düzeltebilirim? dns çalışıyor sanırım... şimdiden > teşekkürler... Aug 1 19:48:18 www sm-mta[45277]: j71BmfZD041340: > to=<[EMAIL PROTECTED]>, ctladdr=<[EMAIL PROTECTED]> (80/80), > delay=04:52:13, xdelay=00:00:35, mailer=esmtp, pri=842538, > relay=mail.mynet.com., dsn=4.0.0, stat=Deferred: 451 DNS temporary > failure / gecici DNS hatasi (#4.3.0) > Aug 1 19:48:53 www sm-mta[45277]: j71BCTHX040746: > to=<[EMAIL PROTECTED]>, ctladdr=<[EMAIL PROTECTED]> (80/80), > delay=05:28:48, xdelay=00:00:35, mailer=esmtp, pri=930609, > relay=mail.mynet.com., dsn=4.0.0, stat=Deferred: 451 DNS temporary > failure / gecici DNS hatasi (#4.3.0) > Aug 1 19:49:25 www sm-mta[73555]: j71GX0vL045328: > to=<[EMAIL PROTECTED]>, ctladdr=<[EMAIL PROTECTED]> (80/80), > delay=00:08:51, xdelay=00:08:50, mailer=esmtp, pri=32547, > relay=mx2.hotmail.com. [65.54.166.230], dsn=4.0.0, stat=I/O error > Aug 1 19:49:28 www sm-mta[45277]: j71B7cEN040674: > to=<[EMAIL PROTECTED]>, ctladdr=<[EMAIL PROTECTED]> (80/80), > delay=05:34:11, xdelay=00:00:35, mailer=esmtp, pri=932554, > relay=mail.mynet.com., dsn=4.0.0, stat=Deferred: 451 DNS temporary > failure / gecici DNS hatasi (#4.3.0) Aug 1 19:52:50 www > sm-mta[5958]: j71GgoVJ002072: to=<[EMAIL PROTECTED]>, > ctladdr=<[EMAIL PROTECTED]> (80/80), delay=00:02:26, > xdelay=00:02:26, mailer=esmtp, pri=32530, relay=mail.mynet.com. > [212.101.97.136], dsn=4.0.0, stat=Deferred: 451 DNS temporary > failure / gecici DNS hatasi (#4.3.0) su-2.05b# nslookup > mail.mynet.com > Server: 212.175.85.228 > Address:212.175.85.228#53 Non-authoritative answer: > Name: mail.mynet.com > Address: 212.101.97.136 su-2.05b# - Cikmak icin, e-mail: [EMAIL PROTECTED] Liste arsivi: http://lists.enderunix.org Turkiye'nin ilk FreeBSD kitabi: http://www.acikakademi.com/freebsd.php FreeBSD 6 kitabi: http://www.acikakademi.com/catalog/freebsd6 - Listeye soru sormadan once lutfen http://ipucu.enderunix.org sitesine bakiniz. Cikmak icin, e-mail: [EMAIL PROTECTED] Liste arsivi: http://news.gmane.org/gmane.org.user-groups.bsd.turkey