Re: [panic] Race in IEEE802.11 layer towards device drivers
FreeBSD and all other open source projects are the Tower of Babel in computer era. --me So, join me @ git://dev.nasreddine.com/run.git (or http://dev.nasreddine.com/gitweb/?p=run.git;a=summary ) Just work on any of *_dev branches. - Original Message From: Hans Petter Selasky hsela...@c2i.net To: freebsd-current@freebsd.org Cc: PseudoCylon moonlightak...@yahoo.ca; Sam Leffler s...@freebsd.org; freebsd-...@freebsd.org Sent: Wed, July 21, 2010 10:00:26 AM Subject: Re: [panic] Race in IEEE802.11 layer towards device drivers Hi, Please confirm that this patch is working for you: http://p4web.freebsd.org/@@181261?ac=10 --HPS Confirmed it's properly been updated. AK ___ freebsd-current@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to freebsd-current-unsubscr...@freebsd.org
[PATCH] update to NTP in base
Hello! The instructions at http://www.freebsd.org/cgi/query-pr.cgi?pr=148836 (Pr bin/148836) contains an update to the base system NTP program suite. Please test it and report successes and failures. Known issues: The html doc distribution is not installed, but it can be found on the internet if needed. If it is requested by many to include it I'll make a new patch for it. The patch can be found here http://www.lysator.liu.se/~zeising/FreeBSD/ntp-update/ntpupdate.diff (uncompressed, 10M) http://www.lysator.liu.se/~zeising/FreeBSD/ntp-update/ntpupdate.diff.bz2 (compressed with bz2, 1.7M) The reason for the sizes is that the patches include a lot of changes to the vendor code. See the PR for details. Best Regards! //Niclas ___ freebsd-current@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to freebsd-current-unsubscr...@freebsd.org
Is 802.11p supported?
Hello all, On behalf of a friend I have an inquiry whether FreeBSD supports the wireless 802.11p protocol? More specifically, is it supported on Atheros 5k cards? I realise 5k is a bit generic, I don't have any more details than that (yet) though. He is actually looking for a Linux driver, so I'm not sure knowing that there's a FreeBSD driver (if there is one) would help him at all, but it would be a good opportunity to make him sway to the light side ;) Regards, Alban Hertroys -- Screwing up is an excellent way to attach something to the ceiling. !DSPAM:930,4c48301f286215329633792! ___ freebsd-current@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to freebsd-current-unsubscr...@freebsd.org
Re: Is 802.11p supported?
On 22 Jul 2010, at 12:48, Alban Hertroys wrote: Hello all, On behalf of a friend I have an inquiry whether FreeBSD supports the wireless 802.11p protocol? More specifically, is it supported on Atheros 5k cards? I realise 5k is a bit generic, I don't have any more details than that (yet) though. He is actually looking for a Linux driver, so I'm not sure knowing that there's a FreeBSD driver (if there is one) would help him at all, but it would be a good opportunity to make him sway to the light side ;) We don't support 802.11p (the kernel side). Regards, -- Rui Paulo ___ freebsd-current@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to freebsd-current-unsubscr...@freebsd.org
Re: Problem with ZFS version 15
After reinitialized my gpt scheme, i can successfully import my zpool. After this there was a little bit trouble with my zpool.cache and booting from my pool, but now it works. Thank you to all for your help, Michael Am 20.07.2010 13:30, schrieb Michael Gusek: -Urspr?ngliche Nachricht- Von: Andrey V. Elsukov bu7c...@yandex.ru Gesendet: 20.07.2010 12:47:49 An: Michael Gusek michael.gu...@web.de Betreff: Re: Problem with ZFS version 15 On 20.07.2010 13:51, Michael Gusek wrote: and apply a new bootloader: gpart bootcode -b /boot/pmbr -p /boot/gptzfsboot -i 1 ad0|ad1. After this, i've lost my gpt scheme ! gpart show ad0 says gpart: No such geom: ad0. How can i recover my gpt on ad0 and ad1 ? I'm running a zfs mirror on ad0 and ad1. It is very strange why this command broke your GPT. Actually incorrect PMBR can prevent probes for GEOM_PART_GPT. Yes, this is very strange. I don't have such a backup, only the whole disk for now. Everything else what can i do ? What if i initialize the gpt header: gpart create -s GPT ad0 ? Do i lost my data ? GPT headers and tables will be initialized. After that you should add all partitions with exactly same offsets and sizes. In this case your data will not be touched. Ok, i will try it. I did a backup of the first 16GB of my disk, because i don't know the exact size of my swap partition, but this is my part. Thank you, Michael -- WBR, Andrey V. Elsukov ___ GRATIS für alle WEB.DE Nutzer: Die maxdome Movie-FLAT! Jetzt freischalten unter http://movieflat.web.de ___ freebsd-current@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to freebsd-current-unsubscr...@freebsd.org
Re: Problem with ZFS version 15
On Mon, Jul 19, 2010 at 08:31:11PM -0500, Sam Fourman Jr. wrote: On Mon, Jul 19, 2010 at 7:37 PM, Alexander Best arun...@freebsd.org wrote: how about adding a periodic script to /etc/periodic/daily to backup the information? the idea was raised a long time ago already, but was abandoned [1]. cheers. alex I think that is a good idea, if you have a script to do that I would test it ok here's a dirty dirty patch. what i did was take the etc/periodic/daily/210.backup-aliases script and do some hacking. this is the work of 2 minutes or so. that's why the script is pretty crappy and probably plain wrong in a few cases. however somebody else who has more time might be able to improve it. :) changes to etc/defaults/periodic.conf and etc/periodic/daily/Makefile (or where you want the script to go) need to be hacked in by hand. cheers. alex -- Sam Fourman Jr. Fourman Networks http://www.fourmannetworks.com --- /dev/null 2010-07-22 20:33:01.0 +0200 +++ etc/periodic/daily/220.backup-geom 2010-07-22 20:09:13.0 +0200 @@ -0,0 +1,49 @@ +#!/bin/sh +# +# $FreeBSD:$ +# + +# If there is a global system configuration file, suck it in. +# +if [ -r /etc/defaults/periodic.conf ] +then +. /etc/defaults/periodic.conf +source_periodic_confs +fi + +case $daily_backup_gpart_enable in +[Yy][Ee][Ss]) + temp=/tmp/gpart_temp.bak + gpart show $temp + if [ ! -s $temp ] + then + echo nothing to backup + rm $temp || rc=2 + else + bak=/var/backups + rc=0 + + echo + echo Backing up geom partition information: + + if [ ! -f $bak/gpart.bak ] + then + echo no $bak/gpart.bak + mv $temp $bak/gpart.bak || rc=3 + + elif ! cmp -s $bak/gpart.bak $temp + then + [ $rc -lt 1 ] rc=1 + echo geom partition layout has been altered: + diff -u $bak/gpart.bak $temp + mv $bak/gpart.bak $bak/gpart.bak2 + mv $temp $bak/gpart.bak || rc=3 + else + echo geom partition layout hasn't been altered. skipping backup. + fi + fi;; + +*) rc=0;; +esac + +exit $rc ___ freebsd-current@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to freebsd-current-unsubscr...@freebsd.org
