Re: ath0 driver
Hi, The version should be 0.9.5.3 or better (can't remember if I committed .4 or .3). Shouldn't that be 0.9.5.2? I run the latest current, and hw.ath.hal.version is 0.9.5.2. You're right; I committed a slightly older version to FreeBSD than to Linux. The version The version I have is 0.9.5.2. As to the tcpdump, I get er# tcpdump -i ath0 -y IEEE802_11 tcpdump: data link type DLT_IEEE802_11 tcpdump: listening on ath0 00:18:02.152294 10.0.0.1.netbios-dgm 10.0.0.255.netbios-dgm: NBT UDP PACKET(138) 00:18:02.152502 10.0.0.1.netbios-dgm 10.0.0.255.netbios-dgm: NBT UDP PACKET(138) and thats all that comes up. Does this driver support being set up as an access point yet? I figured it did because ifconfig ath0 mediaopt hostap didnt return any errors. Please let me know if Im doing something wrong. Im sure ive got my *.conf files set up right as I have used them before, however I could be wrong. Thanks for the help David Ive got a Dlink DWL-G520 that Ive installed into a Freebsd system. Ive set up the card with the following00:18:02.152294 10.0.0.1.netbios-dgm 10.0.0.255.netbios-dgm: NBT UDP PACKET(138) 00:18:02.152502 10.0.0.1.netbios-dgm 10.0.0.255.netbios-dgm: NBT UDP PACKET(138) ifconfig_ath0=inet 10.0.0.1 netmask 255.255.255.0 ssid daves channel 10 media DS11 mediaopt hostap This system was cvsuped and buildworld about 3 days ago. The card appears to be working because when I try to connect with my PDA it shows full Link and quality, and when I ifconfig ath0 down , the link and quality go down to nothing. However it doesn't give out dhcp addresses over this interface. Im sure my dhcpd.conf is fine because I've used a similar one on a laptop = aka wireless access point that worked very well. So I tried to use dstumbler to see if it could detect the PDA, however it gives me the following error error: unable to ioctl device socket: Operation now in progress and it stays that way. Has anyone had this issue as well or now what it means? Verify you have the latest HAL using sysctl hw.ath The version should be 0.9.5.3 or better (can't remember if I committed .4 or .3). If you have an old version update. Otherwise you might try tapping 802.11 frames with tcpdump on the AP to see what's going on: tcpdump -i ath0 -y IEEE802_11 As to dstumbler, it is intimately tied to the wi driver at the moment. I have a version that works w/ wi and ath drivers but it's a major rewrite and incomplete. If someone wants to pick it up I'd be happy to pass the (incomplete) work on... Sam ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to [EMAIL PROTECTED]
ath0 driver
Ive got a Dlink DWL-G520 that Ive installed into a Freebsd system. Ive set up the card with the following ifconfig_ath0=inet 10.0.0.1 netmask 255.255.255.0 ssid daves channel 10 media DS11 mediaopt hostap This system was cvsuped and buildworld about 3 days ago. The card appears to be working because when I try to connect with my PDA it shows full Link and quality, and when I ifconfig ath0 down , the link and quality go down to nothing. However it doesnt give out dhcp addresses over this interface. Im sure my dhcpd.conf is fine because I've used a similar one on a laptop = aka wireless access point that worked very well. So I tried to use dstumbler to see if it could detect the PDA, however it gives me the following error error: unable to ioctl device socket: Operation now in progress and it stays that way. Has anyone had this issue as well or now what it means? Thanks David ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to [EMAIL PROTECTED]
Failed to make buildkernel with device ath
I've tried to rebuild the kernel a couple of times now with device ath to add support for my 54g card. The system was cvsup to current yesterday ( 29/07/03) and make buildworld completed succesfully. However rebuilding the kernel fails on this : if_ath.o: In function `ath_attach': /usr/src/sys/i386/compile/DAVESSERVER/../../../dev/ath/if_ath.c:198: undefined reference to `ath_hal_attach' if_ath.o: In function `ath_tx_start': /usr/src/sys/i386/compile/DAVESSERVER/../../../dev/ath/if_ath.c:1767: undefined reference to `ath_hal_computetxtime' /usr/src/sys/i386/compile/DAVESSERVER/../../../dev/ath/if_ath.c:1771: undefined reference to `ath_hal_computetxtime' /usr/src/sys/i386/compile/DAVESSERVER/../../../dev/ath/if_ath.c:1774: undefined reference to `ath_hal_computetxtime' if_ath.o: In function `ath_getchannels': /usr/src/sys/i386/compile/DAVESSERVER/../../../dev/ath/if_ath.c:2309: undefined reference to `ath_hal_init_channels' /usr/src/sys/i386/compile/DAVESSERVER/../../../dev/ath/if_ath.c:2322: undefined reference to `ath_hal_mhz2ieee' if_ath.o: In function `ath_attach': /usr/src/sys/i386/compile/DAVESSERVER/../../../dev/ath/if_ath.c:192: undefined reference to `sysctl__hw_ath_children' /usr/src/sys/i386/compile/DAVESSERVER/../../../dev/ath/if_ath.c:198: undefined reference to `sysctl__hw_ath_children' /usr/src/sys/i386/compile/DAVESSERVER/../../../dev/ath/if_ath.c:205: undefined reference to `sysctl__hw_ath_children' /usr/src/sys/i386/compile/DAVESSERVER/../../../dev/ath/if_ath.c:221: undefined reference to `sysctl__hw_ath_children' /usr/src/sys/i386/compile/DAVESSERVER/../../../dev/ath/if_ath.c:229: undefined reference to `sysctl__hw_ath_children' if_ath.o:/usr/src/sys/i386/compile/DAVESSERVER/../../../dev/ath/if_ath.c:236: more undefined references to `sysctl__hw_ath_children' follow if_ath_pci.o: In function `ath_pci_probe': /usr/src/sys/i386/compile/DAVESSERVER/../../../dev/pci/pcivar.h:191: undefined reference to `ath_hal_probe' *** Error code 1 Stop in /usr/src/sys/i386/compile/DAVESSERVER. server# I cant find anything similar to this in the archives and google gives me nothing. let me know if any additional info is needed Thanks David ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to [EMAIL PROTECTED]
error during buildworld
Hi all Last night I CVSupped my system for the first time, It came up with no errors. I then went to make buildworld and I got the following error. === usr.sbin/bluetooth/bcmfw rm -f .depend mkdep -f .depend -a -I/usr/src/usr.sbin/bluetooth/bcmfw/../../../sys/netgraph/bluetooth/include /usr/src/usr.sbin/bluetooth/bcmfw/bcmfw.c echo bcmfw: /usr/sbin//usr/lib/libc.a .depend === usr.sbin/bluetooth/hccontrol rm -f .depend mkdep -f .depend -a -I/usr/src/usr.sbin/bluetooth/hccontrol/../../../sys/netgraph/bluetooth/include /usr/src/usr.sbin/bluetooth/hccontrol/send_recv.c /usr/src/usr.sbin/bluetooth/hccontrol/link_policy.c /usr/src/usr.sbin/bluetooth/hccontrol/link_control.c /usr/src/usr.sbin/bluetooth/hccontrol/host_controller_baseband.c /usr/src/usr.sbin/bluetooth/hccontrol/info.c /usr/src/usr.sbin/bluetooth/hccontrol/status.c /usr/src/usr.sbin/bluetooth/hccontrol/node.c /usr/src/usr.sbin/bluetooth/hccontrol/hccontrol.c /usr/src/usr.sbin/bluetooth/hccontrol/util.c echo hccontrol: /usr/sbin//usr/lib/libc.a .depend === usr.sbin/bluetooth/hcsecd lex -t /usr/src/usr.sbin/bluetooth/hcsecd/lexer.l lexer.c yacc -d -o parser.c /usr/src/usr.sbin/bluetooth/hcsecd/parser.y rm -f .depend mkdep -f .depend -a -I/usr/src/usr.sbin/bluetooth/hcsecd/../../../sys/netgraph/bluetooth/include /usr/src/usr.sbin/bluetooth/hcsecd/hcsecd.c lexer.c parser.c /usr/src/usr.sbin/bluetooth/hcsecd/parser.y:41:20: hcsecd.h: No such file or directory mkdep: compile failed *** Error code 1 Stop in /usr/src/usr.sbin/bluetooth/hcsecd. *** Error code 1 Stop in /usr/src/usr.sbin/bluetooth. *** Error code 1 Stop in /usr/src/usr.sbin. *** Error code 1 Stop in /usr/src. *** Error code 1 Stop in /usr/src. *** Error code 1 Stop in /usr/src. The way I understand this messageis that it cant find hcsecd.h which is in there. Can anyone tell me what to make of this? Thanks David ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to [EMAIL PROTECTED]
