ip6_input.c & ip6_output.c compile errors
in sys/netinet6/ip6_input.c sys/netinet6/ip6_otput.c inetsw and ip_protox are used instead of inet6sw and ip6_protox Val == Valentin S. Chopov Phone: 1-888-200-4392 x597 E-Mail: [EMAIL PROTECTED] == To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-current" in the body of the message
Re: microuptime() still going backwards (long)
Mike, It was just a suggestion. I'm sure in my case the problem was in the buggy BIOS (this is a old 486 notebook:). Val --- Mike Smith <[EMAIL PROTECTED]> wrote: > > This shouldn't have any effect at all; I think > you're just waving > chickens here. If you can work out what is actually > happening here it'd > be quite useful though - PNPBIOS may result in some > differences in > resource allocation which might be salient. > > > Try w/o PNPBIOS option. I had the similar > problem, > > and that fixed it. > > > > Val > > > > - > > I followed the suggestions from people earlier > today. > > That is to > > say that I have upgraded my BIOS to 1012, disabled > APM > > in the BIOS, > > and removed 'device apm' from the kernel config, > > however I still > > receive lines like: > > > > calcru: negative time of 20585525 usec for pid 477 > > (cvsup) > > > > and also lines about microuptime() being negative > (I > > think these are > > related :) > > > > Below is a dmesg and my kernel config. > > > > Cheers > > > > > > __ > > Do You Yahoo!? > > Talk to your friends online with Yahoo! Messenger. > > http://im.yahoo.com > > > > > > To Unsubscribe: send mail to [EMAIL PROTECTED] > > with "unsubscribe freebsd-current" in the body of > the message > > > > -- > \\ Give a man a fish, and you feed him for a day. \\ > Mike Smith > \\ Tell him he should learn how to fish himself, \\ > [EMAIL PROTECTED] > \\ and he'll hate you for a lifetime. \\ > [EMAIL PROTECTED] > > > __ Do You Yahoo!? Talk to your friends online with Yahoo! Messenger. http://im.yahoo.com To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-current" in the body of the message
RE: microuptime() still going backwards (long)
Try w/o PNPBIOS option. I had the similar problem, and that fixed it. Val - I followed the suggestions from people earlier today. That is to say that I have upgraded my BIOS to 1012, disabled APM in the BIOS, and removed 'device apm' from the kernel config, however I still receive lines like: calcru: negative time of 20585525 usec for pid 477 (cvsup) and also lines about microuptime() being negative (I think these are related :) Below is a dmesg and my kernel config. Cheers __ Do You Yahoo!? Talk to your friends online with Yahoo! Messenger. http://im.yahoo.com To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-current" in the body of the message
ata-all.c : undefined atapi_attach() in ata_attach()
It seems that we need #if...#endif here, maybe something like that: ... #if NATAPICD > 0 || NATAPIFD > 0 || NATAPIST > 0 /* then the atapi devices */ for (ctlr=0; ctlrdevices & ATA_ATAPI_MASTER) atapi_attach(atadevices[ctlr], ATA_MASTER); if (atadevices[ctlr]->devices & ATA_ATAPI_SLAVE) atapi_attach(atadevices[ctlr], ATA_SLAVE); } #endif ... Val __ Do You Yahoo!? Talk to your friends online with Yahoo! Messenger. http://im.yahoo.com To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-current" in the body of the message
newpcm - duplex/simplex
On my notebook I have pnp CS4232. It has to work in duplex mode - 2 dmas, but it's buggy, and works only in simplex mode - 1 dma (play + capture). Is it possible to add a option to force using of simplex mode on pnp cards? Thanks, Val __ Do You Yahoo!? Talk to your friends online with Yahoo! Messenger. http://im.yahoo.com To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-current" in the body of the message
ata-all.o(.text+0x534): undefined reference to `pci_read_config'
It seems there is something for #if NPCI > 0 ... #endif linking kernel ata-all.o: In function `ataintr': ata-all.o(.text+0x534): undefined reference to `pci_read_config' *** Error code 1 -- Val __ Do You Yahoo!? Talk to your friends online with Yahoo! Messenger. http://messenger.yahoo.com To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-current" in the body of the message
ata-all.c & ata_find_dev()
Hi, There is are error in compilling of ata-all.c on a non-PCI macine, so I think, in ata-all.c the ata_find_dev() has to be moved into #if NPCI > 0 ... #endif Val __ Do You Yahoo!? Thousands of Stores. Millions of Products. All in one place. Yahoo! Shopping: http://shopping.yahoo.com To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-current" in the body of the message
4.0-CURRENT boot kernel, ATA_16BIT_ONLY , etc.
Hi, The latest 4.0-CURRENT boot floppies are not working on old ISA boards with 16-bit data transfer only, and the installation of FreeBSD becomes impossible:( . It seems that in this case ATA_16BIT_ONLY is not enough - may be flags to ata0 controller or auto-detection as Soren promised will be O.K.?! Thanks, Val __ Do You Yahoo!? Thousands of Stores. Millions of Products. All in one place. Yahoo! Shopping: http://shopping.yahoo.com To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-current" in the body of the message
ata changes & ATA_16BIT_ONLY
How the ATA_16BIT_ONLY in ata-disk.c and atapi-all.c will be defined - kernel option, autodetection or device flag? Thanks, Val __ Do You Yahoo!? Bid and sell for free at http://auctions.yahoo.com To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-current" in the body of the message
new PnP code and pcm and kernel userconfig
The sound card is: ... unknown0: <4232> on isa0 pcm0: at port 0x534-0x537,0x388-0x38b,0x220-0x22f irq 5 drq 1,0 on isa0 unknown1: at port 0x200-0x207 on isa0 unknown2: at port 0x330-0x331 irq 9 on isa0 ... Everything looks fine but in my case the CS4232 is a buggy and it can't work in duplex mode and I have to change drq0=drq1=1 Now I can't do this from the kernel userconfig (boot -c ) - pnp configuration is missing. Any ideas? Thanks, Val __ Do You Yahoo!? Bid and sell for free at http://auctions.yahoo.com To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-current" in the body of the message
linking kernel & isa_compat & error
After last cvsup: linking kernel isa_compat.o: In function `isa_compat_probe': isa_compat.o(.text+0x3a6): undefined reference to `isa_get_flags' *** Error code 1 Val __ Do You Yahoo!? Bid and sell for free at http://auctions.yahoo.com To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-current" in the body of the message
make depend & if_ed.c & pnp.h
error after make depend . there is a #include in sys/i386/isa/if_ed.c , but there is not pnp.h in the sys tree. Val __ Do You Yahoo!? Bid and sell for free at http://auctions.yahoo.com To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-current" in the body of the message
Re: problem with last src/sys/pccard changes
It was my fault :( Now it's working. Thanks a lot! Val --- Warner Losh <[EMAIL PROTECTED]> wrote: > You may need to do a make includes as well to get > the proper include > files (or if you are afraid of that, you can copy > src/sys/pccard/cardinfo.h to > /usr/include/pccard/cardinfo.h) > > Warner > === Valentin S. Chopov 2301 West Bethel Ave., #53 Muncie, IN 47304-2112 Phone/Fax: (765)-214-0504 E-Mail: [EMAIL PROTECTED] URL:http://profiles.yahoo.com/valsho _ Do You Yahoo!? Free instant messaging and more at http://messenger.yahoo.com To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-current" in the body of the message
Re: problem with last src/sys/pccard changes
I wrote, I cvsuped both src/sys/pccard and src/usr.sbin/pccard and compiled and installed of course. Problem appears with new kernel code and new pccardd code, but is is OK with old kernel code an new pccardd code. But I already wrote this... BTW , my notebook is ISA only, w/o compiled PCI code. Val --- Warner Losh <[EMAIL PROTECTED]> wrote: > In message > <[EMAIL PROTECTED]> > "Valentin S. Chopov" writes: > : > : After cvsup of src/sys/pccard and > src/usr.sbin/pccard > : from Aug 1, PCMCIA net card is not working. Te > message > : from pccardd is : > : > : Aug 3 02:28:42 valsho pccardd[256]: driver > allocation > : failed for IC-CARD(IC-CARD): Inappropriate ioctl > for > : device > : > : Also new pccardd is working with old kernel > code... > : So, may be te problem is in src/sys/pccard. > > Read UPDATING. You must recompile pccardd for the > new kernel. The > ioctl changed to pass the length of the io port > range into the kernel > rather than just the bottom end of the range. > > Warner > === Valentin S. Chopov 2301 West Bethel Ave., #53 Muncie, IN 47304-2112 Phone/Fax: (765)-214-0504 E-Mail: [EMAIL PROTECTED] URL:http://profiles.yahoo.com/valsho _ Do You Yahoo!? Free instant messaging and more at http://messenger.yahoo.com To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-current" in the body of the message
problem with last src/sys/pccard changes
After cvsup of src/sys/pccard and src/usr.sbin/pccard from Aug 1, PCMCIA net card is not working. Te message from pccardd is : Aug 3 02:28:42 valsho pccardd[256]: driver allocation failed for IC-CARD(IC-CARD): Inappropriate ioctl for device Also new pccardd is working with old kernel code... So, may be te problem is in src/sys/pccard. Thanks, Val _ Do You Yahoo!? Free instant messaging and more at http://messenger.yahoo.com To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-current" in the body of the message
current.freebsd.org's 4.0-1999070[89]-CURRENT dir perm
Permissions in ftp://current.freebsd.org/pub/FreeBSD/snapshots/i386 are: drwx-- 19 root 0 1024 Jul 8 12:38 4.0-19990708-CURRENT drwx-- 19 root 0 1024 Jul 9 12:37 4.0-19990709-CURRENT Val _ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-current" in the body of the message
