Hi,
My -CURRENT(2003/03/12) laptop(ThinkPad X23) can't be suspended.
When I try
# acpiconf -s 1
I have console message
'acpi0: AcpiGetSleepTypeData failed - AE_NOT_FOUND'
How can I solve this?
dmesg output is attached.
Regards,
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT-20030312-JPSNAP #1: Tue Mar 18 01:26:29 JST 2003
[EMAIL PROTECTED]:/usr/src/sys/i386/compile/JORDAN
Preloaded elf kernel /boot/kernel/kernel at 0xc0802000.
Preloaded elf module /boot/kernel/acpi.ko at 0xc08020a8.
Timecounter i8254 frequency 1193182 Hz
Timecounter TSC frequency 865934929 Hz
CPU: Intel(R) Pentium(R) III Mobile CPU 866MHz (865.93-MHz 686-class CPU)
Origin = GenuineIntel Id = 0x6b1 Stepping = 1
Features=0x383f9ffFPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
real memory = 670498816 (639 MB)
avail memory = 642658304 (612 MB)
Allocating major#253 to net
Allocating major#252 to pci
Pentium Pro MTRR support enabled
npx0: math processor on motherboard
npx0: INT 16 interface
acpi0: IBMTP-1Don motherboard
ACPI-0625: *** Info: GPE Block0 defined as GPE0 to GPE15
ACPI-0625: *** Info: GPE Block1 defined as GPE16 to GPE31
pcibios: BIOS version 2.10
Using $PIR table, 14 entries at 0xc00fdeb0
ACPI-1287: *** Error: Method execution failed, AE_NOT_EXIST
ACPI-1287: *** Error: Method execution failed, AE_NOT_EXIST
acpi0: power button is handled as a fixed feature programming model.
Timecounter ACPI-fast frequency 3579545 Hz
acpi_timer0: 24-bit timer at 3.579545MHz port 0x1008-0x100b on acpi0
acpi_cpu0: CPU port 0x530-0x537 on acpi0
acpi_tz0: thermal zone port 0x530-0x537 on acpi0
acpi_lid0: Control Method Lid Switch on acpi0
ACPI-1287: *** Error: Method execution failed, AE_NOT_EXIST
acpi_button0: Sleep Button on acpi0
pcib0: ACPI Host-PCI bridge port 0xcf8-0xcff on acpi0
pci0: ACPI PCI bus on pcib0
agp0: Intel 82830 host to AGP bridge mem 0xd000-0xdfff at device 0.0 on pci0
pcib1: ACPI PCI-PCI bridge at device 1.0 on pci0
pci1: ACPI PCI bus on pcib1
pci1: display, VGA at device 0.0 (no driver attached)
uhci0: Intel 82801CA/CAM (ICH3) USB controller USB-A port 0x1800-0x181f irq 11 at
device 29.0 on pci0
usb0: Intel 82801CA/CAM (ICH3) USB controller USB-A on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: Intel 82801CA/CAM (ICH3) USB controller USB-B port 0x1820-0x183f irq 11 at
device 29.1 on pci0
usb1: Intel 82801CA/CAM (ICH3) USB controller USB-B on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: Intel 82801CA/CAM (ICH3) USB controller USB-C port 0x1840-0x185f irq 11 at
device 29.2 on pci0
usb2: Intel 82801CA/CAM (ICH3) USB controller USB-C on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
pcib2: ACPI PCI-PCI bridge at device 30.0 on pci0
pci2: ACPI PCI bus on pcib2
cbb0: RF5C476 PCI-CardBus Bridge mem 0x5000-0x5fff irq 11 at device 3.0 on
pci2
start (5000) sc-membase (c020)
start (5000) sc-pmembase (e800)
cardbus0: CardBus bus on cbb0
pccard0: 16-bit PCCard bus on cbb0
cbb1: RF5C476 PCI-CardBus Bridge mem 0x5010-0x50100fff irq 11 at device 3.1 on
pci2
start (5010) sc-membase (c020)
start (5010) sc-pmembase (e800)
cardbus1: CardBus bus on cbb1
pccard1: 16-bit PCCard bus on cbb1
fwohci0: Ricoh R5C552 mem 0xc0201000-0xc02017ff irq 11 at device 3.2 on pci2
fwohci0: PCI bus latency was changing to 250.
fwohci0: OHCI version 1.0 (ROM=0)
fwohci0: No. of Isochronous channel is 4.
fwohci0: EUI64 00:06:1b:00:20:01:b0:a0
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: IEEE1394(FireWire) bus on fwohci0
if_fwe0: Ethernet over FireWire on firewire0
if_fwe0: Fake Ethernet address: 02:06:1b:01:b0:a0
sbp0: SBP2/SCSI over firewire on firewire0
fwohci0: Initiate bus reset
fwohci0: BUS reset
fwohci0: node_id = 0xc800ffc0, CYCLEMASTER mode
firewire0: 1 nodes, maxhop = 0, cable IRM = 0 (me)
wi0: Intersil Prism2.5 mem 0xf000-0xffff irq 11 at device 5.0 on pci2
wi0: 802.11 address: 00:20:e0:8a:71:c8
wi0: using RF:PRISM2.5 MAC:ISL3874A(Mini-PCI)
wi0: Intersil Firmware: Primary (1.1.0), Station (1.4.2)
wi0: supported rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
fxp0: Intel 82801CAM (ICH3) Pro/100 VE Ethernet port 0x8000-0x803f mem
0xc020-0xc0200fff irq 11 at device 8.0 on pci2
fxp0: Ethernet address 00:d0:59:aa:4d:f3
inphy0: i82562ET 10/100 media interface on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isab0: PCI-ISA bridge at device 31.0 on pci0
isa0: ISA bus on isab0
atapci0: Intel ICH3 UDMA100
