Re: Abit's BP6 and 'lmmon' or 'chm'
In [EMAIL PROTECTED] Chris D.
Faulhaber [EMAIL PROTECTED] wrote:
On Mon, 11 Oct 1999, Nickolay Dudorov wrote:
Does anybody successfully use ports/sysutils/{lmmon|chm}
with the Abit's BP6 motherboard ?
After 'make install'-ing ports and adding
controller smbus0
controller iicbus0
controller iicbb0
controller intpm0
device smb0 at smbus?
to kernel config file (and config, make depend, make, make install,
reboot the new kernel) I only receive:
IOCTL: device not configured
from lmmon and chm.
This is due to the intpm controller not configuring the motherboards PM
controller, not because the software.
I emailed Takanori Watanabe a while back concerning this MB. His thoughts
were that: 1) He hadn't heard of the driver working in an SMP environment;
2) It may be due to the controller using an unconfigured ISA interface.
Additional information:
When I remove one of the CPUs and boot UP kernel on the same
motherboard both 'chm' and 'lmmon' starts to work (also showed
values for -5V and -12V looks strange).
So the problems is in driver not working in SMP
system. Are there any (general) hints where to look for
such UP/SMP problems ?
N.Dudorov
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message
Re: Abit's BP6 and 'lmmon' or 'chm'
In message [EMAIL PROTECTED], [EMAIL PROTECTED] wrote: In [EMAIL PROTECTED] Chris D. Faulhaber [EMAIL PROTECTED] wrote: When I remove one of the CPUs and boot UP kernel on the same motherboard both 'chm' and 'lmmon' starts to work (also showed values for -5V and -12V looks strange). Probably the Hardware sensor is not LM78/79 but W83781. So the problems is in driver not working in SMP system. Are there any (general) hints where to look for such UP/SMP problems ? I know the problem,but I cannot find out how it could be solved. The reason is the driver does not catch intrrupt. Wait a few days. I'll make a patch so that you can use polling mode for 'intpm'. Takanori Watanabe a href="http://www.planet.sci.kobe-u.ac.jp/~takawata/key.html" Public Key/a Key fingerprint = 2C 51 E2 78 2C E1 C5 2D 0F F1 20 A3 11 3A 62 2A To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-current" in the body of the message
Abit's BP6 and 'lmmon' or 'chm'
Does anybody successfully use ports/sysutils/{lmmon|chm}
with the Abit's BP6 motherboard ?
After 'make install'-ing ports and adding
controller smbus0
controller iicbus0
controller iicbb0
controller intpm0
device smb0 at smbus?
to kernel config file (and config, make depend, make, make install,
reboot the new kernel) I only receive:
IOCTL: device not configured
from lmmon and chm.
N.Dudorov
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message
Re: Abit's BP6 and 'lmmon' or 'chm'
On Mon, Oct 11, 1999 at 06:44:50PM +0700, Nickolay Dudorov wrote:
Does anybody successfully use ports/sysutils/{lmmon|chm}
with the Abit's BP6 motherboard ?
snip
II only receive:
IOCTL: device not configured
from lmmon and chm.
I have the same problem with the 'wmhm' port. I also have Abit BP6 with two
450 Mhz Celerons.
Dave.
--
Dave J. Boers
[EMAIL PROTECTED] I will *NOT* read email sent to
Graduate student of Theoretical Physics [EMAIL PROTECTED]
- FreeBSD: The Power to Serve .http://www.freebsd.org
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message
Re: Abit's BP6 and 'lmmon' or 'chm'
On Mon, 11 Oct 1999, Nickolay Dudorov wrote:
Does anybody successfully use ports/sysutils/{lmmon|chm}
with the Abit's BP6 motherboard ?
After 'make install'-ing ports and adding
controller smbus0
controller iicbus0
controller iicbb0
controller intpm0
device smb0 at smbus?
to kernel config file (and config, make depend, make, make install,
reboot the new kernel) I only receive:
IOCTL: device not configured
from lmmon and chm.
This is due to the intpm controller not configuring the motherboards PM
controller, not because the software.
I emailed Takanori Watanabe a while back concerning this MB. His thoughts
were that: 1) He hadn't heard of the driver working in an SMP environment;
2) It may be due to the controller using an unconfigured ISA interface.
Anyone else wish to comment?
-
Chris D. Faulhaber [EMAIL PROTECTED] | All the true gurus I've met never
System/Network Administrator,| claimed they were one, and always
Reality Check Information, Inc. | pointed to someone better.
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message
Re: Abit's BP6 and 'lmmon' or 'chm'
Does anybody successfully use ports/sysutils/{lmmon|chm}
with the Abit's BP6 motherboard ?
snip
II only receive:
IOCTL: device not configured
from lmmon and chm.
I have the same problem with the 'wmhm' port. I also have Abit BP6 with two
450 Mhz Celerons.
Ditto. BP6 with 2xCeleron 366, no overclocking. FreeBSD-current as of
a couple of days ago.
Steinar Haug, Nethelp consulting, [EMAIL PROTECTED]
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message
