I've been trying to figure out why my Intel SR2100 servers would not boot with ACPI enabled, hanging uninterruptibly after probing the ACPI timer. I experimented with disabling various subsystems, and came up with the following results:
- With `pci_link' disabled, the boot gets as far as ``Device configuration complete'' before hanging. - With `timer' disabled, the boot gets all the way through. - With `bus', `children', or `all' disabled, the boot fails at mountroot, having failed to probe any devices. A verbose boot of the kernel with `timer' disabled shows the following. Note also that some of the thermal parameters are given as -1, which seems to confuse the thermal module. -GAWollman Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.0-CURRENT #0: Thu Mar 13 12:58:29 EST 2003 [EMAIL PROTECTED]:/usr/src/sys/i386/compile/GRAPEVINE Preloaded elf kernel "/boot/kernel/kernel" at 0xc051f000. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc051f0b4. Calibrating clock(s) ... i8254 clock: 1193098 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz Calibrating TSC clock ... TSC clock: 999722211 Hz Timecounter "TSC" frequency 999722211 Hz CPU: Intel Pentium III (999.72-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x68a Stepping = 10 Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> real memory = 1073676288 (1023 MB) Physical memory chunk(s): 0x00001000 - 0x0009efff, 647168 bytes (158 pages) 0x00546000 - 0x3ffe7fff, 1068113920 bytes (260770 pages) avail memory = 1037578240 (989 MB) bios32: Found BIOS32 Service Directory header at 0xc00f6990 bios32: Entry = 0xfd85e (c00fd85e) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xfd7c0+0x397 pnpbios: Found PnP BIOS data at 0xc00f69c0 pnpbios: Entry = f0000:a934 Rev = 1.0 Other BIOS signatures found: Allocating major#253 to "net" null: <null device, zero device> Allocating major#252 to "pci" mem: <memory & I/O> Pentium Pro MTRR support enabled random: <entropy source> npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <INTEL 024B > on motherboard ACPI-0625: *** Info: GPE Block0 defined as GPE0 to GPE31 pci_open(1): mode 1 addr port (0x0cf8) is 0x80000070 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=00091166) pcibios: BIOS version 2.10 acpi0: power button is handled as a fixed feature programming model. acpi_cpu0: <CPU> on acpi0 acpi_cpu1: <CPU> on acpi0 acpi_tz0: <thermal zone> on acpi0 acpi_tz0: _CRT value is absurd, ignored (-217.-7C) acpi_tz0: _ACx value is absurd, ignored (-247.-7C) acpi_tz1: <thermal zone> on acpi0 acpi_tz1: _CRT value is absurd, ignored (-217.-7C) acpi_tz1: _ACx value is absurd, ignored (-247.-7C) acpi_tz2: <thermal zone> on acpi0 acpi_tz2: _CRT value is absurd, ignored (-217.-7C) acpi_tz2: _ACx value is absurd, ignored (-247.-7C) acpi_button0: <Sleep Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 ---- initial configuration ------------------------ \\_SB_.IR1_ irq 0: [ 5 10] low,level,sharable 0.15.0 \\_SB_.LN12 irq 10: [ 5 10] low,level,sharable 0.3.0 \\_SB_.LN13 irq 11: [ 5 10] low,level,sharable 0.2.0 \\_SB_.LN1A irq 5: [ 5 10] low,level,sharable 0.6.0 \\_SB_.LN1B irq 0: [ 5 10] low,level,sharable 0.6.1 \\_SB_.LN1C irq 0: [ 5 10] low,level,sharable 0.6.2 \\_SB_.LN1D irq 0: [ 5 10] low,level,sharable 0.6.3 \\_SB_.LN17 irq 0: [ 5 10] low,level,sharable 0.7.0 \\_SB_.LN1B irq 0: [ 5 10] low,level,sharable 0.7.1 \\_SB_.LN1C irq 0: [ 5 10] low,level,sharable 0.7.2 \\_SB_.LN1D irq 0: [ 5 10] low,level,sharable 0.7.3 \\_SB_.LN18 irq 0: [ 5 10] low,level,sharable 0.8.0 \\_SB_.LN1D irq 0: [ 5 10] low,level,sharable 0.8.1 \\_SB_.LN1B irq 0: [ 5 10] low,level,sharable 0.8.2 \\_SB_.LN1C irq 0: [ 5 10] low,level,sharable 0.8.3 \\_SB_.LN19 irq 0: [ 5 10] low,level,sharable 0.9.0 \\_SB_.LN1C irq 0: [ 5 10] low,level,sharable 0.9.1 \\_SB_.LN1D irq 0: [ 5 10] low,level,sharable 0.9.2 \\_SB_.LN1B irq 0: [ 5 10] low,level,sharable 0.9.3 ---- before setting priority for links ------------ \\_SB_.IR1_: interrupts: 5 10 penalty: 1860 1860 references: 1 priority: 0 \\_SB_.LN1B: interrupts: 5 10 penalty: 1860 1860 references: 4 priority: 0 \\_SB_.LN1C: interrupts: 5 10 penalty: 1860 1860 references: 4 priority: 0 \\_SB_.LN1D: interrupts: 5 10 penalty: 1860 1860 references: 4 priority: 0 \\_SB_.LN17: interrupts: 5 10 penalty: 1860 1860 references: 1 priority: 0 \\_SB_.LN18: interrupts: 5 10 penalty: 1860 1860 references: 1 priority: 0 \\_SB_.LN19: interrupts: 5 10 penalty: 1860 1860 references: 1 priority: 0 ---- before fixup boot-disabled links ------------- \\_SB_.LN1B: interrupts: 5 10 penalty: 1860 1860 references: 4 priority: 7440 \\_SB_.LN1C: interrupts: 5 10 penalty: 1860 1860 references: 4 priority: 7440 \\_SB_.LN1D: interrupts: 5 10 penalty: 1860 1860 references: 4 priority: 7440 \\_SB_.IR1_: interrupts: 5 10 penalty: 1860 1860 references: 1 priority: 1860 \\_SB_.LN17: interrupts: 5 10 penalty: 1860 1860 references: 1 priority: 1860 \\_SB_.LN18: interrupts: 5 10 penalty: 1860 1860 references: 1 priority: 1860 \\_SB_.LN19: interrupts: 5 10 penalty: 1860 1860 references: 1 priority: 1860 ---- after fixup boot-disabled links -------------- ---- arbitrated configuration --------------------- \\_SB_.IR1_ irq 5: [ 5 10] low,level,sharable 0.15.0 \\_SB_.LN12 irq 10: [ 5 10] low,level,sharable 0.3.0 \\_SB_.LN13 irq 11: [ 5 10] low,level,sharable 0.2.0 \\_SB_.LN1A irq 5: [ 5 10] low,level,sharable 0.6.0 \\_SB_.LN1B irq 10: [ 5 10] low,level,sharable 0.6.1 \\_SB_.LN1C irq 5: [ 5 10] low,level,sharable 0.6.2 \\_SB_.LN1D irq 10: [ 5 10] low,level,sharable 0.6.3 \\_SB_.LN17 irq 5: [ 5 10] low,level,sharable 0.7.0 \\_SB_.LN1B irq 10: [ 5 10] low,level,sharable 0.7.1 \\_SB_.LN1C irq 5: [ 5 10] low,level,sharable 0.7.2 \\_SB_.LN1D irq 10: [ 5 10] low,level,sharable 0.7.3 \\_SB_.LN18 irq 5: [ 5 10] low,level,sharable 0.8.0 \\_SB_.LN1D irq 10: [ 5 10] low,level,sharable 0.8.1 \\_SB_.LN1B irq 10: [ 5 10] low,level,sharable 0.8.2 \\_SB_.LN1C irq 5: [ 5 10] low,level,sharable 0.8.3 \\_SB_.LN19 irq 5: [ 5 10] low,level,sharable 0.9.0 \\_SB_.LN1C irq 5: [ 5 10] low,level,sharable 0.9.1 \\_SB_.LN1D irq 10: [ 5 10] low,level,sharable 0.9.2 \\_SB_.LN1B irq 10: [ 5 10] low,level,sharable 0.9.3 pci0: <ACPI PCI bus> on pcib0 pci0: physical bus=0 found-> vendor=0x1166, dev=0x0009, revid=0x06 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0107, statreg=0x2200, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x1166, dev=0x0009, revid=0x06 bus=0, slot=0, func=1 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0107, statreg=0x0200, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[10]: type 3, range 32, base fa000000, size 24, enabled map[14]: type 4, range 32, base 00001000, size 8, enabled map[18]: type 1, range 32, base f9000000, size 12, enabled found-> vendor=0x1002, dev=0x4756, revid=0x7a bus=0, slot=2, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0087, statreg=0x0290, cachelnsz=8 (dwords) lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 1 supports D0 D3 current D0 map[10]: type 1, range 32, base f9001000, size 12, enabled map[14]: type 4, range 32, base 00001400, size 6, enabled map[18]: type 1, range 32, base f9100000, size 20, enabled found-> vendor=0x8086, dev=0x1229, revid=0x08 bus=0, slot=3, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0117, statreg=0x0290, cachelnsz=8 (dwords) lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns) intpin=a, irq=10 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base f9004000, size 14, enabled found-> vendor=0x1385, dev=0x630a, revid=0x01 bus=0, slot=6, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0116, statreg=0x02a0, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0 ns) intpin=a, irq=5 map[90]: type 4, range 32, base 00000580, size 4, enabled found-> vendor=0x1166, dev=0x0200, revid=0x50 bus=0, slot=15, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x0107, statreg=0x0200, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[18]: type 4, range 32, base 00000170, size 3, enabled map[1c]: type 4, range 32, base 00000374, size 2, enabled map[20]: type 4, range 32, base 00001440, size 4, enabled found-> vendor=0x1166, dev=0x0211, revid=0x00 bus=0, slot=15, func=1 class=01-01-8e, hdrtype=0x00, mfdev=1 cmdreg=0x0105, statreg=0x0200, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) pci0: <display, VGA> at device 2.0 (no driver attached) fxp0: <Intel 82557/8/9 EtherExpress Pro/100(B) Ethernet> port 0x1400-0x143f mem 0xf9100000-0xf91fffff,0xf9001000-0xf9001fff irq 10 at device 3.0 on pci0 fxp0: using memory space register mapping fxp0: Ethernet address 00:d0:b7:b7:45:eb fxp0: PCI IDs: 8086 1229 8086 1229 0008 fxp0: Dynamic Standby mode is disabled inphy0: <i82555 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp0: bpf attached ti0: <Netgear GA620 1000baseT Gigabit Ethernet> mem 0xf9004000-0xf9007fff irq 5 at device 6.0 on pci0 ti0: Ethernet address: 00:02:e3:00:4c:36 ti0: bpf attached isab0: <PCI-ISA bridge> port 0x580-0x58f at device 15.0 on pci0 isa0: <ISA bus> on isab0 pci0: <mass storage, ATA> at device 15.1 (no driver attached) pcib1: <ACPI Host-PCI bridge> on acpi0 ---- initial configuration ------------------------ \\_SB_.LN10 irq 9: [ 5 10] low,level,sharable 1.4.0 \\_SB_.LN11 irq 11: [ 5 10] low,level,sharable 1.4.1 \\_SB_.LN14 irq 9: [ 5 10] low,level,sharable 1.10.0 \\_SB_.LN1B irq 10: [ 5 10] low,level,sharable 1.10.1 \\_SB_.LN1C irq 5: [ 5 10] low,level,sharable 1.10.2 \\_SB_.LN1D irq 10: [ 5 10] low,level,sharable 1.10.3 \\_SB_.LN15 irq 0: [ 5 10] low,level,sharable 1.11.0 \\_SB_.LN1D irq 10: [ 5 10] low,level,sharable 1.11.1 \\_SB_.LN1B irq 10: [ 5 10] low,level,sharable 1.11.2 \\_SB_.LN1C irq 5: [ 5 10] low,level,sharable 1.11.3 ---- before setting priority for links ------------ \\_SB_.LN15: interrupts: 5 10 penalty: 2970 3170 references: 1 priority: 0 ---- before fixup boot-disabled links ------------- \\_SB_.LN15: interrupts: 5 10 penalty: 2970 3170 references: 1 priority: 3070 ---- after fixup boot-disabled links -------------- ---- arbitrated configuration --------------------- \\_SB_.LN10 irq 9: [ 5 10] low,level,sharable 1.4.0 \\_SB_.LN11 irq 11: [ 5 10] low,level,sharable 1.4.1 \\_SB_.LN14 irq 9: [ 5 10] low,level,sharable 1.10.0 \\_SB_.LN1B irq 10: [ 5 10] low,level,sharable 1.10.1 \\_SB_.LN1C irq 5: [ 5 10] low,level,sharable 1.10.2 \\_SB_.LN1D irq 10: [ 5 10] low,level,sharable 1.10.3 \\_SB_.LN15 irq 5: [ 5 10] low,level,sharable 1.11.0 \\_SB_.LN1D irq 10: [ 5 10] low,level,sharable 1.11.1 \\_SB_.LN1B irq 10: [ 5 10] low,level,sharable 1.11.2 \\_SB_.LN1C irq 5: [ 5 10] low,level,sharable 1.11.3 pci1: <ACPI PCI bus> on pcib1 pci1: physical bus=1 map[10]: type 4, range 32, base 00001800, size 8, enabled map[14]: type 1, range 64, base fb000000, size 12, enabled found-> vendor=0x9005, dev=0x00cf, revid=0x01 bus=1, slot=4, func=0 class=01-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0117, statreg=0x02b0, cachelnsz=8 (dwords) lattimer=0x48 (2160 ns), mingnt=0x28 (10000 ns), maxlat=0x19 (6250 ns) intpin=a, irq=9 powerspec 2 supports D0 D3 current D0 map[10]: type 4, range 32, base 00002000, size 8, enabled map[14]: type 1, range 64, base fb001000, size 12, enabled found-> vendor=0x9005, dev=0x00cf, revid=0x01 bus=1, slot=4, func=1 class=01-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0117, statreg=0x02b0, cachelnsz=8 (dwords) lattimer=0x48 (2160 ns), mingnt=0x28 (10000 ns), maxlat=0x19 (6250 ns) intpin=b, irq=11 powerspec 2 supports D0 D3 current D0 map[10]: type 4, range 32, base 00002400, size 8, enabled map[14]: type 1, range 32, base fb002000, size 12, enabled found-> vendor=0x1077, dev=0x2200, revid=0x05 bus=1, slot=10, func=0 class=01-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0117, statreg=0x02b0, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0 ns) intpin=a, irq=9 powerspec 1 supports D0 D3 current D0 ahc0: <Adaptec aic7899 Ultra160 SCSI adapter> port 0x1800-0x18ff mem 0xfb000000-0xfb000fff irq 9 at device 4.0 on pci1 ahc0: Defaulting to MEMIO off ahc0: Reading SEEPROM...done. ahc0: Manual LVD Termination ahc0: BIOS eeprom is present ahc0: Secondary High byte termination Enabled ahc0: Secondary Low byte termination Enabled ahc0: Primary Low Byte termination Enabled ahc0: Primary High Byte termination Enabled ahc0: Downloading Sequencer Program... 430 instructions downloaded ahc0: Features 0x1fef6, Bugs 0x40, Flags 0x485540 aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs ahc1: <Adaptec aic7899 Ultra160 SCSI adapter> port 0x2000-0x20ff mem 0xfb001000-0xfb001fff irq 11 at device 4.1 on pci1 ahc1: Defaulting to MEMIO off ahc1: Reading SEEPROM...done. ahc1: Manual LVD Termination ahc1: BIOS eeprom is present ahc1: Secondary High byte termination Enabled ahc1: Secondary Low byte termination Enabled ahc1: Primary Low Byte termination Enabled ahc1: Primary High Byte termination Enabled ahc1: Downloading Sequencer Program... 430 instructions downloaded ahc1: Features 0x1fef6, Bugs 0x40, Flags 0x405540 aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs Qlogic ISP Driver, FreeBSD Version 5.9, Core Version 2.7 isp0: <Qlogic ISP 2200 PCI FC-AL Adapter> port 0x2400-0x24ff mem 0xfb002000-0xfb002fff irq 9 at device 10.0 on pci1 isp0: using I/O space register mapping isp0: Board Type 2200, Chip Revision 0x5, loaded F/W Revision 2.2.3 isp0: Installed in 64-Bit PCI slot isp0: Last F/W revision was 0.28757.8224 isp0: 980 max I/O commands supported isp0: NVRAM Port WWN 0x210000e08b03c6e2 sio0: irq maps: 0x1 0x11 0x1 0x1 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A sio1: irq maps: 0x1 0x9 0x1 0x1 sio1 port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 Allocating major#251 to "devstat" atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0x41ab (2) kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000 psm0: unable to allocate IRQ psmcpnp0 irq 12 on acpi0 psm0: current command byte:0047 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model IntelliMouse Explorer, device ID 4-00, 5 buttons psm0: config:00000000, flags:00000000, packet size:4 psm0: syncmask:08, syncbits:08 acpi_ec0: <embedded controller> port 0xca7,0xca6 on acpi0 atkbdc: atkbdc0 already exists; skipping it fdc: fdc0 already exists; skipping it sio: sio0 already exists; skipping it sio: sio1 already exists; skipping it Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: <Option ROMs> at iomem 0xcf800-0xcffff,0xc9800-0xcf7ff,0xc8000-0xc97ff,0xc0000-0xc7fff on isa0 pmtimer0 on isa0 adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) ata0 failed to probe at port 0x1f0 irq 14 on isa0 ata1 failed to probe at port 0x170 irq 15 on isa0 bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fe0: not probed (disabled) ie0: not probed (disabled) le0: not probed (disabled) lnc0: not probed (disabled) pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0 pcic1: not probed (disabled) ppc0 failed to probe at irq 7 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff vt0: not probed (disabled) isa_probe_children: probing PnP devices Device configuration finished. Timecounters tick every 10.000 msec lo0: bpf attached Waiting 2 seconds for SCSI devices to settle (noperiph:ahc0:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted. (noperiph:ahc1:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted. isp0: Firmware State <Config Wait->Loss Of Sync> (probe39:isp0:0:9:0): Request Requeued (probe39:isp0:0:9:0): Retrying Command (probe0:ahc0:0:0:0): Retrying Command (probe1:ahc0:0:1:0): Retrying Command (probe6:ahc0:0:6:0): error 22 (probe6:ahc0:0:6:0): Unretryable Error (ahc0:A:0:0): Sending PPR bus_width 1, period 9, offset 7f, ppr_options 2 (ahc0:A:0:0): Received PPR width 1, period 9, offset 1f,options 2 Filtered to width 1, period 9, offset 1f, options 2 ahc0: target 0 using 16bit transfers ahc0: target 0 synchronous at 80.0MHz DT, offset = 0x1f (ahc0:A:1:0): Sending PPR bus_width 1, period 9, offset 7f, ppr_options 2 (ahc0:A:1:0): Received PPR width 1, period 9, offset 3f,options 2 Filtered to width 1, period 9, offset 3f, options 2 ahc0: target 1 using 16bit transfers ahc0: target 1 synchronous at 80.0MHz DT, offset = 0x3f pass0 at ahc0 bus 0 target 0 lun 0 pass0: <SEAGATE ST39236LC 0004> Fixed Direct Access SCSI-3 device pass0: Serial Number 3BN05GN9000010380GBX pass0: 160.000MB/s transfers (80.000MHz, offset 31, 16bit), Tagged Queueing Enabled pass1 at ahc0 bus 0 target 1 lun 0 pass1: <SEAGATE ST373405LC 0003> Fixed Direct Access SCSI-3 device pass1: Serial Number 3EK28VJ000007307CSVH pass1: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged Queueing Enabled pass2 at ahc0 bus 0 target 6 lun 0 pass2: <ESG-SHV SCA HSBP M10 0.05> Fixed Processor SCSI-2 device pass2: 3.300MB/s transfers ses0 at ahc0 bus 0 target 6 lun 0 ses0: <ESG-SHV SCA HSBP M10 0.05> Fixed Processor SCSI-2 device ses0: 3.300MB/s transfers ses0: SAF-TE Compliant Device da0 at ahc0 bus 0 target 0 lun 0 da0: <SEAGATE ST39236LC 0004> Fixed Direct Access SCSI-3 device da0: Serial Number 3BN05GN9000010380GBX da0: 160.000MB/s transfers (80.000MHz, offset 31, 16bit), Tagged Queueing Enabled da0: 8761MB (17942584 512 byte sectors: 255H 63S/T 1116C) da1 at ahc0 bus 0 target 1 lun 0 da1: <SEAGATE ST373405LC 0003> Fixed Direct Access SCSI-3 device da1: Serial Number 3EK28VJ000007307CSVH da1: 160.000MB/s transfers (80.000MHz, offset 63, 16bit), Tagged Queueing Enabled da1: 70007MB (143374741 512 byte sectors: 255H 63S/T 8924C) GEOM: new disk da0 GEOM: new disk da1 [0] f:80 typ:165 s(CHS):0/1/1 e(CHS):255/254/255 s:63 l:17928477 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure da0s1, start 32256 length 9179380224 end 9179412479 [0] f:80 typ:165 s(CHS):0/1/1 e(CHS):255/254/255 s:63 l:143363997 [1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 [3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0 GEOM: Configure da1s1, start 32256 length 73402366464 end 73402398719 GEOM: Add da0s1 hot[0] start 512 length 276 end 787 GEOM: Configure da0s1a, start 0 length 268435456 end 268435455 GEOM: Configure da0s1b, start 268435456 length 1610612736 end 1879048191 GEOM: Configure da0s1c, start 0 length 9179380224 end 9179380223 GEOM: Configure da0s1d, start 1879048192 length 7300332032 end 9179380223 GEOM: Add da1s1 hot[0] start 512 length 276 end 787 GEOM: Configure da1s1c, start 0 length 73402366464 end 73402366463 GEOM: Configure da1s1d, start 0 length 73402366464 end 73402366463 GEOM: Add da0s1a hot[0] start 512 length 276 end 787 GEOM: Add da0s1c hot[0] start 512 length 276 end 787 GEOM: Add da1s1c hot[0] start 512 length 276 end 787 GEOM: Add da1s1d hot[0] start 512 length 276 end 787 Mounting root from ufs:/dev/da0s1a start_init: trying /sbin/init GEOM: Add da1s1d hot[0] start 512 length 276 end 787 acpi_tz0: _AC9: temperature 31.0 >= setpoint -273.-2 acpi_tz0: _AC8: temperature 31.0 >= setpoint -273.-2 acpi_tz0: _AC7: temperature 31.0 >= setpoint -273.-2 acpi_tz0: _AC6: temperature 31.0 >= setpoint -273.-2 acpi_tz0: _AC5: temperature 31.0 >= setpoint -273.-2 acpi_tz0: _AC4: temperature 31.0 >= setpoint -273.-2 acpi_tz0: _AC3: temperature 31.0 >= setpoint -273.-2 acpi_tz0: _AC2: temperature 31.0 >= setpoint -273.-2 acpi_tz0: _AC1: temperature 31.0 >= setpoint -273.-2 acpi_tz0: _AC0: temperature 31.0 >= setpoint -273.-2 acpi_tz0: switched from NONE to _AC0: 31.0C acpi_tz0: WARNING - current temperature (31.0C) exceeds system limits acpi_tz2: _AC9: temperature 26.0 >= setpoint -273.-2 acpi_tz2: _AC8: temperature 26.0 >= setpoint -273.-2 acpi_tz2: _AC7: temperature 26.0 >= setpoint -273.-2 acpi_tz2: _AC6: temperature 26.0 >= setpoint -273.-2 acpi_tz2: _AC5: temperature 26.0 >= setpoint -273.-2 acpi_tz2: _AC4: temperature 26.0 >= setpoint -273.-2 acpi_tz2: _AC3: temperature 26.0 >= setpoint -273.-2 acpi_tz2: _AC2: temperature 26.0 >= setpoint -273.-2 acpi_tz2: _AC1: temperature 26.0 >= setpoint -273.-2 acpi_tz2: _AC0: temperature 26.0 >= setpoint -273.-2 acpi_tz2: switched from NONE to _AC0: 26.0C acpi_tz2: WARNING - current temperature (26.0C) exceeds system limits Bad malloc flags: 4 Stack backtrace: malloc() of "64" with the following non-sleepablelocks held: exclusive sleep mutex netisr lock r = 0 (0xc043eee0) locked @ net/netisr.c:215 Here's the output of `sysctl hw.acpi': hw.acpi.power_button_state: S5 hw.acpi.sleep_button_state: S1 hw.acpi.lid_switch_state: S1 hw.acpi.standby_state: S1 hw.acpi.suspend_state: S3 hw.acpi.sleep_delay: 0 hw.acpi.s4bios: 1 hw.acpi.verbose: 1 hw.acpi.disable_on_poweroff: 1 hw.acpi.thermal.min_runtime: 0 hw.acpi.thermal.polling_rate: 30 hw.acpi.thermal.tz0.temperature: 3002 hw.acpi.thermal.tz0.active: -1 hw.acpi.thermal.tz0.thermal_flags: 0 hw.acpi.thermal.tz0._PSV: -1 hw.acpi.thermal.tz0._HOT: -1 hw.acpi.thermal.tz0._CRT: 3832 hw.acpi.thermal.tz0._ACx: 3502 -1 -1 -1 -1 -1 -1 -1 -1 -1 hw.acpi.thermal.tz1.temperature: 2782 hw.acpi.thermal.tz1.active: -1 hw.acpi.thermal.tz1.thermal_flags: 0 hw.acpi.thermal.tz1._PSV: -1 hw.acpi.thermal.tz1._HOT: -1 hw.acpi.thermal.tz1._CRT: 3832 hw.acpi.thermal.tz1._ACx: 3502 -1 -1 -1 -1 -1 -1 -1 -1 -1 hw.acpi.thermal.tz2.temperature: 2992 hw.acpi.thermal.tz2.active: -1 hw.acpi.thermal.tz2.thermal_flags: 0 hw.acpi.thermal.tz2._PSV: -1 hw.acpi.thermal.tz2._HOT: -1 hw.acpi.thermal.tz2._CRT: 3532 hw.acpi.thermal.tz2._ACx: 3202 -1 -1 -1 -1 -1 -1 -1 -1 -1 To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-current" in the body of the message