Sorry to reply to my own mail -- never report problems before
investigating what was committed.
The $Id$ - $FreeBSD$ changes to ifconfig are probably not the cause --
more likely the changes to xl (1.52 - 1.53), and the addition of the
mii-controller. Anybody else seeing this, or should I look somewhere
else alltogether?
Hi,
After the recent changes to ifconfig and the xl driver I am getting
a panic when rc.network runs ifconfig:
[...]
Doing initial network setup: hostname.
UP,LOOPBACK,RUNN
ING,MULTICAST m
E®WioFnetmask 0xffa00
tal trap 12: page fault while in kernel mode
fault virtual address = 0x0
fault code = supervisor read, page not present
instruction pointer = 0x8:0x0
stack pointer = 0x10:0xc8d18dc4
frame pointer = 0x10:0xc8d18ddc
code segment= base 0x0, limit 0xf, type 0x1b
= DPL 0, pres 1, def32 1, gran 1
processor eflags= interrupt enabled, resume, IOPL = 0
current process = 78 (ifconfig)
interrupt mask = net
kernel: type 12 trap, code=0
Stopped at 0:
Fatal trap 12: page fault while in kernel mode
fault virtual address = 0x0
fault code = supervisor read, page not present
instruction pointer = 0x8:0xc020cac4
stack pointer = 0x10:0xc8d18c3c
frame pointer = 0x10:0xc8d18c40
code segment= base 0x0, limit 0xf, type 0x1b
= DPL 0, pres 1, def32 1, gran 1
processor eflags= interrupt enabled, resume, IOPL = 0
current process = 78 (ifconfig)
interrupt mask = net
kernel: type 12 trap, code=0
db
This is after a make buildworld/installworld on -current (as of today).
dmesg and config-file:
FreeBSD/i386 bootstrap loader, Revision 0.7 639/65472kB
([EMAIL PROTECTED], Mon Aug 30 10:58:22 CEST 1999)
/kernel text=0x164b84 data=0x1ee6c+0x1e1e8
syms=[0x4+0x24760+0x4+0x268f8]
Hit [Enter] to boot immediately, or any other key for command prompt.
Booting [kernel]...
Copyright (c) 1992-1999 The FreeBSD Project.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights
reserved.
FreeBSD 4.0-CURRENT #0: Mon Aug 30 18:56:22 CEST 1999
[EMAIL PROTECTED]:/usr/src/sys/compile/HOME
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium II/Xeon/Celeron (400.90-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x652 Stepping = 2
Features=0x183f9ffFPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR
real memory = 134217728 (131072K bytes)
avail memory = 127102976 (124124K bytes)
Preloaded elf kernel "kernel" at 0xc02ef000.
VESA: v2.0, 8192k memory, flags:0x0, mode table:0xc029d042 (122)
VESA: ATI MACH64
Pentium Pro MTRR support enabled
npx0: math processor on motherboard
npx0: INT 16 interface
apm0: APM BIOS on motherboard
apm: found APM BIOS v1.2, connected at v1.2
pcib0: Intel 82443BX (440 BX) host to PCI bridge on motherboard
pci0: PCI bus on pcib0
pcib1: Intel 82443BX (440 BX) PCI-PCI (AGP) bridge at device 1.0 on
pci0
pci1: PCI bus on pcib1
vga-pci0: ATI model 4742 graphics accelerator irq 15 at device 0.0 on
pci1
isab0: Intel 82371AB PCI to ISA bridge at device 7.0 on pci0
isa0: ISA bus on isab0
chip1: Intel PIIX4 IDE controller at device 7.1 on pci0
chip2: UHCI USB controller at device 7.2 on pci0
chip3: Intel 82371AB Power management controller at device 7.3 on pci0
ahc0: Adaptec 2940 SCSI adapter irq 15 at device 15.0 on pci0
ahc0: aic7870 Wide Channel A, SCSI Id=7, 16/255 SCBs
pcm0: AudioPCI ES1370 irq 11 at device 16.0 on pci0
pcm0: using I/O space register mapping at 0xe800
xl0: 3Com 3c905B-TX Fast Etherlink XL irq 10 at device 18.0 on pci0
xl0: Ethernet address: 00:10:4b:7a:96:7d
miibus0: MII bus on xl0
xlphy0: 3Com internal media interface on miibus0
xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xlphy1: 3Com internal media interface on miibus0
xlphy1: ignoring this PHY, non-zero instance
device_probe_and_attach: xlphy1 attach returned 6
Probing for PnP devices:
atkbdc0: keyboard controller (i8042) at port 0x60-0x6f on isa0
atkbd0: AT Keyboard irq 1 on atkbdc0
psm0: PS/2 Mouse irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: Generic ISA VGA at port 0x3b0-0x3df iomem 0xa-0xb on
isa0
sc0: System console on isa0
sc0: VGA 9 virtual consoles, flags=0x0
fdc0: NEC 72065B or clone at port 0x3f0-0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1440-KB 3.5" drive on fdc0 drive 0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A, console
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0 at port 0x378-0x37f on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
lpt0: generic printer on ppbus 0
Waiting 5 seconds for SCSI devices to settle
changing root device to da0s1a