On Thu, Sep 18, 2003 at 11:21:20PM -0600, Scott Long wrote:
We'd like to get a new poll on the stability and readiness of 4.9.
Last night I upgraded my laptop and it hung partway thru the boot
(immediately after the pcm0: line in the dmesg below). Powering
it off and back on made it boot normally. It's not done this
before and I don't know whether to blame this on a glitch or the
new kernel.
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.9-PRERELEASE #0: Thu Sep 18 20:46:38 EST 2003
[EMAIL PROTECTED]:/home/obj/i586/usr/src/sys/pj1592
Timecounter i8254 frequency 1193182 Hz
CPU: Pentium/P55C (quarter-micron) (233.86-MHz 586-class CPU)
Origin = GenuineIntel Id = 0x581 Stepping = 1
Features=0x8001bfFPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX
real memory = 100663296 (98304K bytes)
avail memory = 94388224 (92176K bytes)
Preloaded elf kernel kernel at 0xc036e000.
Intel Pentium detected, installing workaround for F00F bug
Using $PIR table, 5 entries at 0xc00f5c00
apm0: APM BIOS on motherboard
apm0: found APM BIOS v1.2, connected at v1.2
npx0: math processor on motherboard
npx0: INT 16 interface
pcib0: Host to PCI bridge on motherboard
pci0: PCI bus on pcib0
isab0: PCI to ISA bridge (vendor=1045 device=c700) at device 1.0 on pci0
isa0: ISA bus on isab0
ohci0: OHCI (generic) USB controller mem 0x4100-0x41000fff irq 11 at device 16.0
on pci0
usb0: OHCI version 1.0, legacy support
usb0: OHCI (generic) USB controller on ohci0
usb0: USB revision 1.0
uhub0: (0x0e11) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pcic0: TI PCI-1131 PCI-CardBus Bridge mem 0x7fffe000-0x7fffefff irq 15 at device
17.0 on pci0
pcic0: TI113X PCI Config Reg: [ring enable][speaker enable][CSC serial isa irq]
pccard0: PC Card 16-bit bus (classic) on pcic0
pcic1: TI PCI-1131 PCI-CardBus Bridge mem 0x7000-0x7fff irq 11 at device
17.1 on pci0
pcic1: TI113X PCI Config Reg: [ring enable][speaker enable][CSC serial isa irq]
pccard1: PC Card 16-bit bus (classic) on pcic1
pci0: Chips Technologies 68554 SVGA controller at 18.0
atapci0: Generic PCI ATA controller port 0x1000-0x100f at device 20.0 on pci0
atapci0: Busmastering DMA not supported
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
orm0: Option ROM at iomem 0xc-0xc9fff on isa0
pmtimer0 on isa0
fdc0: NEC 72065B or clone at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1440-KB 3.5 drive on fdc0 drive 0
atkbdc0: Keyboard controller (i8042) at port 0x60,0x64 on isa0
atkbd0: AT Keyboard flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: PS/2 Mouse irq 12 on atkbdc0
psm0: model GlidePoint, device ID 0
vga0: Generic ISA VGA at port 0x3c0-0x3df iomem 0xa-0xb on isa0
sc0: System console at flags 0x100 on isa0
sc0: VGA 12 virtual consoles, flags=0x300
sio0 at port 0x3f8-0x3ff irq 4 on isa0
sio0: type 16550A
pca0 at port 0x40 on isa0
ppc0: Parallel port at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
lpt0: Printer on ppbus0
lpt0: Interrupt-driven port
ppi0: Parallel I/O on ppbus0
unknown: PNP can't assign resources
pca1: AT-style speaker sound at port 0x61 on isa0
unknown: PNP0303 can't assign resources
unknown: CPQae3d can't assign resources
unknown: PNP0401 can't assign resources
unknown: PNP0501 can't assign resources
unknown: PNP0511 can't assign resources
unknown: PNP0700 can't assign resources
sbc0: ESS ES1878 at port 0x220-0x22f,0x388-0x38b,0x330-0x331 irq 5 drq 1,5 on isa0
pcm0: ESS 18xx DSP on sbc0
ipfw2 initialized, divert enabled, rule-based forwarding enabled, default to accept,
logging limited to 100 packets/entry by default
DUMMYNET initialized (011031)
pccard: card inserted, slot 0
pccard: card inserted, slot 1
pccard: card removed, slot 0
pccard: card removed, slot 1
ad0: 3102MB IBM-DYKA-23240 [6304/16/63] at ata0-master BIOSPIO
acd0: CDROM UJDA120 at ata0-slave BIOSPIO
Mounting root from ufs:/dev/ad0s1a
pccard: card inserted, slot 0
pccard: card inserted, slot 1
Peter
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to [EMAIL PROTECTED]
