Re: SOS: ATAng: Broke my ATA (ICH3).
backing off to ata-lowlevel.c 1.10 allows me to boot again. --On Saturday, September 13, 2003 18:54:18 -0500 Larry Rosenman [EMAIL PROTECTED] wrote: --On Saturday, September 13, 2003 18:09:21 -0500 Larry Rosenman [EMAIL PROTECTED] wrote: I have a ICH3 controller, and a 9/9 kernel works just fine, but a today kernel hangs(!) after printing ata0: [MPSAFE] Here is the GOOD dmesg: $ dmesg|grep ata atapci0: Intel ICH3 UDMA100 controller port 0x1c20-0x1c2f,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 mem 0xe010-0xe01003ff at device 31.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata0: [MPSAFE] ata1: at 0x170 irq 15 on atapci0 ata1: [MPSAFE] ad0: 57231MB FUJITSU MHS2060AT [116280/16/63] at ata0-master UDMA100 acd0: CDRW SONY CD-RW CRX800E at ata1-master WDMA2 cd0 at ata1 bus 0 target 0 lun 0 $ Any ideas? LER For the record, I also pulled atapicam out of the kernel, and the same thing happens. Where to, folks? -- Larry Rosenman http://www.lerctr.org/~ler Phone: +1 972-414-9812 E-Mail: [EMAIL PROTECTED] US Mail: 1905 Steamboat Springs Drive, Garland, TX 75044-6749 pgp0.pgp Description: PGP signature
SOS: ATAng: Broke my ATA (ICH3).
I have a ICH3 controller, and a 9/9 kernel works just fine, but a today kernel hangs(!) after printing ata0: [MPSAFE] Here is the GOOD dmesg: $ dmesg|grep ata atapci0: Intel ICH3 UDMA100 controller port 0x1c20-0x1c2f,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 mem 0xe010-0xe01003ff at device 31.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata0: [MPSAFE] ata1: at 0x170 irq 15 on atapci0 ata1: [MPSAFE] ad0: 57231MB FUJITSU MHS2060AT [116280/16/63] at ata0-master UDMA100 acd0: CDRW SONY CD-RW CRX800E at ata1-master WDMA2 cd0 at ata1 bus 0 target 0 lun 0 $ Any ideas? LER -- Larry Rosenman http://www.lerctr.org/~ler Phone: +1 972-414-9812 E-Mail: [EMAIL PROTECTED] US Mail: 1905 Steamboat Springs Drive, Garland, TX 75044-6749 pgp0.pgp Description: PGP signature
Re: SOS: ATAng: Broke my ATA (ICH3).
--On Saturday, September 13, 2003 18:09:21 -0500 Larry Rosenman [EMAIL PROTECTED] wrote: I have a ICH3 controller, and a 9/9 kernel works just fine, but a today kernel hangs(!) after printing ata0: [MPSAFE] Here is the GOOD dmesg: $ dmesg|grep ata atapci0: Intel ICH3 UDMA100 controller port 0x1c20-0x1c2f,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 mem 0xe010-0xe01003ff at device 31.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata0: [MPSAFE] ata1: at 0x170 irq 15 on atapci0 ata1: [MPSAFE] ad0: 57231MB FUJITSU MHS2060AT [116280/16/63] at ata0-master UDMA100 acd0: CDRW SONY CD-RW CRX800E at ata1-master WDMA2 cd0 at ata1 bus 0 target 0 lun 0 $ Any ideas? LER For the record, I also pulled atapicam out of the kernel, and the same thing happens. Where to, folks? -- Larry Rosenman http://www.lerctr.org/~ler Phone: +1 972-414-9812 E-Mail: [EMAIL PROTECTED] US Mail: 1905 Steamboat Springs Drive, Garland, TX 75044-6749 pgp0.pgp Description: PGP signature