It seems that the ata driver still has some issues with configuring the
RAID devices. Sources cvsupped today.
Pete
Hit [Enter] to boot immediately, or any other key for command prompt.
Booting [/boot/kernel/kernel]...
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.1-CURRENT #11: Mon Jul 14 12:22:00 GMT 2003
[EMAIL PROTECTED]:/usr/src/sys/i386/compile/EMTEST
Preloaded elf kernel /boot/kernel/kernel at 0xc04d7000.
Timecounter i8254 frequency 1193182 Hz
Timecounter TSC frequency 598009854 Hz
CPU: Intel Celeron (598.01-MHz 686-class CPU)
Origin = GenuineIntel Id = 0x683 Stepping = 3
Features=0x383fbffFPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
real memory = 267386880 (255 MB)
avail memory = 254500864 (242 MB)
Pentium Pro MTRR support enabled
npx0: math processor on motherboard
npx0: INT 16 interface
pcibios: BIOS version 2.10
Using $PIR table, 10 entries at 0xc00e8790
pcib0: Intel 82815 (i815 GMCH) Host To Hub bridge at pcibus 0 on
motherboard
pci0: PCI bus on pcib0
pci_cfgintr: 0:2 INTA BIOS irq 5
pci_cfgintr: 0:31 INTD BIOS irq 11
pci_cfgintr: 0:31 INTB BIOS irq 9
agp0: Intel 82815 (i815 GMCH) SVGA controller mem
0x4070-0x4077,0x4400-0x47ff irq 5 at device 2.0 on pci0
pcib1: PCIBIOS PCI-PCI bridge at device 30.0 on pci0
pci2: PCI bus on pcib1
pci_cfgintr: 2:8 INTA BIOS irq 5
pci_cfgintr: 2:8 INTB BIOS irq 9
pci_cfgintr: 2:9 INTA BIOS irq 9
pci_cfgintr: 2:10 INTA BIOS irq 10
pci2: network, ethernet at device 8.0 (no driver attached)
pci2: network, ethernet at device 8.1 (no driver attached)
atapci0: Promise PDC20619 UDMA133 controller port
0x1080-0x10ff,0x1480-0x148f,0x1000-0x107f mem
0x4020-0x4021,0x4040-0x40400fff irq 9 at device 9.0 on pci2
ata2: at 0x4040 on atapci0
ata3: at 0x4040 on atapci0
ata4: at 0x4040 on atapci0
ata5: at 0x4040 on atapci0
atapci1: Promise PDC20269 UDMA133 controller port
0x1490-0x149f,0x14b4-0x14b7,0x14a8-0x14af,0x14b0-0x14b3,0x14a0-0x14a7
mem 0x4030-0x40303fff irq 10 at device 10.0 on pci2
ata6: at 0x14a0 on atapci1
ata7: at 0x14a8 on atapci1
isab0: PCI-ISA bridge at device 31.0 on pci0
isa0: ISA bus on isab0
atapci2: Intel ICH UDMA66 controller port 0x2460-0x246f at device 31.1
on pci0
ata0: at 0x1f0 irq 14 on atapci2
ata1: at 0x170 irq 15 on atapci2
uhci0: Intel 82801AA (ICH) USB controller port 0x2440-0x245f irq 11 at
device 31.2 on pci0
usb0: Intel 82801AA (ICH) USB controller on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: multimedia, audio at device 31.5 (no driver attached)
orm0: Option ROMs at iomem
0xe-0xe,0xd1800-0xd3fff,0xca000-0xd17ff,0xc-0xc9fff on isa0
pmtimer0 on isa0
atkbdc0: Keyboard controller (i8042) at port 0x64,0x60 on isa0
atkbd0: AT Keyboard flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
fdc0: Enhanced floppy controller (i82077, NE72065 or clone) at port
0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1440-KB 3.5 drive on fdc0 drive 0
ppc0: parallel port not found.
sc0: System console at flags 0x100 on isa0
sc0: VGA 16 virtual consoles, flags=0x100
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A, console
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
vga0: Generic ISA VGA at port 0x3c0-0x3df iomem 0xa-0xb on isa0
ppc1: parallel port not found.
unknown: PNP0501 can't assign resources (port)
unknown: PNP0501 can't assign resources (port)
unknown: PNP0700 can't assign resources (port)
unknown: PNP0303 can't assign resources (port)
Timecounters tick every 10.000 msec
ad4: 76319MB WDC WD800JB-00CRA1 [155061/16/63] at ata2-master UDMA100
ad6: 76319MB WDC WD800JB-00CRA1 [155061/16/63] at ata3-master UDMA100
ad8: 76319MB WDC WD800JB-00CRA1 [155061/16/63] at ata4-master UDMA100
ad12: 76319MB WDC WD800JB-00CRA1 [155061/16/63] at ata6-master UDMA100
ar0: 76319MB ATA RAID1 array [9729/255/63] status: READY subdisks:
disk0 READY on ad4 at ata2-master
disk1 READY on ad8 at ata4-master
ar1: WARNING - mirror lost
ar1: 76319MB ATA RAID1 array [9729/255/63] status: DEGRADED subdisks:
disk0 READY on ad6 at ata3-master
disk1 DOWN no device found for this disk
ar2: WARNING - mirror lost
ar2: 76319MB ATA RAID1 array [9729/255/63] status: DEGRADED subdisks:
disk0 DOWN no device found for this disk
disk1 READY on ad12 at ata6-master
Opened disk ad4 - 1
Opened disk ad4 - 1
Opened disk ad4 - 1
Opened disk ad4 - 1
Opened disk ad6 - 1
Opened disk ad6 - 1
Opened disk ad8 - 1
Opened disk ad8 - 1
Opened disk ad12 - 1
Opened disk ad12 - 1
Fatal trap 12: page fault while in kernel mode
fault virtual address = 0x10
fault code = supervisor read, page not present
instruction pointer = 0x8:0xc0161106
stack pointer = 0x10:0xcd22ebd4
