Same machines like in my other mail ... NFS server FreeBSD titan.klemm.apsfilter.org 5.1-CURRENT FreeBSD 5.1-CURRENT #0: Sun Sep 21 13:16:17 CEST 2003 [EMAIL PROTECTED]:/usr/src/sys/i386/compile/TITAN i386
NFS client, Laptop FreeBSD aklemm.klemm.apsfilter.org 5.1-CURRENT FreeBSD 5.1-CURRENT #0: Mon Sep 22 21:29:32 CEST 2003 [EMAIL PROTECTED]:/usr/src/sys/i386/compile/AKLEMM i386 The kernel on the Laptop is 1 day younger than userland just for the case that this is important. I wanted to build the world, but didn't succeed, because running out of mbuf clusters, since I tried to place the obj dir onto the NFS server ... Therefore I checked out new src's and increased mbuf cluster size... options NMBCLUSTERS=4096 # Number of mbuf clusters [EMAIL PROTECTED] /sys/i386/compile/AKLEMM gdb -k kernel.debug /var/crash/vmcore.1 GNU gdb 5.2.1 (FreeBSD) Copyright 2002 Free Software Foundation, Inc. GDB is free software, covered by the GNU General Public License, and you are welcome to change it and/or distribute copies of it under certain conditions. Type "show copying" to see the conditions. There is absolutely no warranty for GDB. Type "show warranty" for details. This GDB was configured as "i386-undermydesk-freebsd"... panic: softdep_setup_inomapdep: found inode panic messages: --- panic: lockmgr: locking against myself panic: from debugger Uptime: 10m26s Dumping 191 MB 16 32 48 64 80 96 112 128 144 160 176 Dump complete Shutting down ACPI Automatic reboot in 15 seconds - press a key on the console to abort --> Press a key on the console to reboot, --> or switch off the system now. Rebooting... Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.1-CURRENT #0: Mon Sep 22 21:29:32 CEST 2003 [EMAIL PROTECTED]:/usr/src/sys/i386/compile/AKLEMM Preloaded elf kernel "/boot/kernel/kernel" at 0xc0439000. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc04392a0. Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel Pentium III (696.58-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x683 Stepping = 3 Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> real memory = 201195520 (191 MB) avail memory = 190812160 (181 MB) Pentium Pro MTRR support enabled VESA: v2.0, 8192k memory, flags:0x0, mode table:0xc03822c2 (1000022) VESA: S3 Incorporated. M7 BIOS npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <TOSHIB 750 > on motherboard pcibios: BIOS version 2.10 Using $PIR table, 9 entries at 0xc00f0190 acpi0: Power Button (fixed) Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0xfe08-0xfe0b on acpi0 acpi_cpu0: <CPU> on acpi0 acpi_tz0: <thermal zone> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib0: slot 5 INTD is routed to irq 11 pcib0: slot 7 INTA is routed to irq 3 pcib0: slot 9 INTA is routed to irq 11 pcib0: slot 12 INTA is routed to irq 11 agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem 0xe0000000-0xe7ffffff at device 0.0 on pci0 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pcib1: slot 0 INTA is routed to irq 11 pci1: <display, VGA> at device 0.0 (no driver attached) isab0: <PCI-ISA bridge> at device 5.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX4 UDMA33 controller> port 0xfff0-0xffff at device 5.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata0: [MPSAFE] ata1: at 0x170 irq 15 on atapci0 ata1: [MPSAFE] pci0: <serial bus, USB> at device 5.2 (no driver attached) pci0: <bridge, PCI-unknown> at device 5.3 (no driver attached) pci0: <simple comms> at device 7.0 (no driver attached) pci0: <unknown> at device 9.0 (no driver attached) cbb0: <ToPIC100 PCI-CardBus Bridge> at device 11.0 on pci0 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 pcib0: slot 11 INTA is routed to irq 11 cbb0: [MPSAFE] cbb1: <ToPIC100 PCI-CardBus Bridge> at device 11.1 on pci0 cardbus1: <CardBus bus> on cbb1 pccard1: <16-bit PCCard bus> on cbb1 pcib0: slot 11 INTB is routed to irq 11 cbb1: [MPSAFE] pci0: <multimedia, audio> at device 12.0 (no driver attached) acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_cmbat0: <Control method Battery> on acpi0 acpi_acad0: <AC adapter> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model IntelliMouse, device ID 3 fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A ppc0 port 0x778-0x77a,0x378-0x37f irq 7 drq 3 on acpi0 ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 pmtimer0 on isa0 orm0: <Option ROM> at iomem 0xc0000-0xcbfff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <8 virtual consoles, flags=0x300> sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounter "TSC" frequency 696581970 Hz quality 800 Timecounters tick every 10.000 msec cardbus0: Resource not specified in CIS: id=14, size=80 cardbus0: Resource not specified in CIS: id=18, size=80 xl0: <3Com 3c575B Fast Etherlink XL> port 0x1000-0x107f mem 0x88002000-0x8800207f,0x88002080-0x880020ff irq 11 at device 0.0 on cardbus0 xl0: Ethernet address: 00:50:04:94:a2:2f miibus0: <MII bus> on xl0 tdkphy0: <TDK 78Q2120 media interface> on miibus0 tdkphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto cardbus1: Resource not specified in CIS: id=14, size=80 cardbus1: Resource not specified in CIS: id=18, size=80 xl1: <3Com 3c575B Fast Etherlink XL> port 0x1080-0x10ff mem 0x88003000-0x8800307f,0x88003080-0x880030ff irq 11 at device 0.0 on cardbus1 xl1: Ethernet address: 00:50:04:e0:11:b7 miibus1: <MII bus> on xl1 tdkphy1: <TDK 78Q2120 media interface> on miibus1 tdkphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto GEOM: create disk ad0 dp=0xc1812670 ad0: 11513MB <TOSHIBA MK1214GAP> [23392/16/63] at ata0-master UDMA33 acd0: DVDROM <TOSHIBA DVD-ROM SD-C2402> at ata1-master PIO4 Mounting root from ufs:/dev/ad0s2a WARNING: / was not properly dismounted WARNING: R/W mount of / denied. Filesystem is not clean - run fsck WARNING: /usr was not properly dismounted /usr: mount pending error: blocks 44 files 69 /usr: superblock summary recomputed WARNING: /var was not properly dismounted Waiting (max 60 seconds) for system process `vnlru' to stop...stopped Waiting (max 60 seconds) for system process `bufdaemon' to stop...stopped Waiting (max 60 seconds) for system process `syncer' to stop...stopped syncing disks, buffers remaining... done Uptime: 2m17s Shutting down ACPI Rebooting... Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.1-CURRENT #0: Mon Sep 22 21:29:32 CEST 2003 [EMAIL PROTECTED]:/usr/src/sys/i386/compile/AKLEMM Preloaded elf kernel "/boot/kernel/kernel" at 0xc0439000. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0439294. Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel Pentium III (696.58-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x683 Stepping = 3 Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> real memory = 201195520 (191 MB) avail memory = 190812160 (181 MB) Pentium Pro MTRR support enabled VESA: v2.0, 8192k memory, flags:0x0, mode table:0xc03822c2 (1000022) VESA: S3 Incorporated. M7 BIOS npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <TOSHIB 750 > on motherboard pcibios: BIOS version 2.10 Using $PIR table, 9 entries at 0xc00f0190 acpi0: Power Button (fixed) Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0xfe08-0xfe0b on acpi0 acpi_cpu0: <CPU> on acpi0 acpi_tz0: <thermal zone> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib0: slot 5 INTD is routed to irq 11 pcib0: slot 7 INTA is routed to irq 3 pcib0: slot 9 INTA is routed to irq 11 pcib0: slot 12 INTA is routed to irq 11 agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem 0xe0000000-0xe7ffffff at device 0.0 on pci0 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pcib1: slot 0 INTA is routed to irq 11 pci1: <display, VGA> at device 0.0 (no driver attached) isab0: <PCI-ISA bridge> at device 5.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX4 UDMA33 controller> port 0xfff0-0xffff at device 5.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata0: [MPSAFE] ata1: at 0x170 irq 15 on atapci0 ata1: [MPSAFE] pci0: <serial bus, USB> at device 5.2 (no driver attached) pci0: <bridge, PCI-unknown> at device 5.3 (no driver attached) pci0: <simple comms> at device 7.0 (no driver attached) pci0: <unknown> at device 9.0 (no driver attached) cbb0: <ToPIC100 PCI-CardBus Bridge> at device 11.0 on pci0 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 pcib0: slot 11 INTA is routed to irq 11 cbb0: [MPSAFE] cbb1: <ToPIC100 PCI-CardBus Bridge> at device 11.1 on pci0 cardbus1: <CardBus bus> on cbb1 pccard1: <16-bit PCCard bus> on cbb1 pcib0: slot 11 INTB is routed to irq 11 cbb1: [MPSAFE] pci0: <multimedia, audio> at device 12.0 (no driver attached) acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_cmbat0: <Control method Battery> on acpi0 acpi_acad0: <AC adapter> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model IntelliMouse, device ID 3 fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A ppc0 port 0x778-0x77a,0x378-0x37f irq 7 drq 3 on acpi0 ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 pmtimer0 on isa0 orm0: <Option ROM> at iomem 0xc0000-0xcbfff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <8 virtual consoles, flags=0x300> sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounter "TSC" frequency 696583244 Hz quality 800 Timecounters tick every 10.000 msec cardbus0: Resource not specified in CIS: id=14, size=80 cardbus0: Resource not specified in CIS: id=18, size=80 xl0: <3Com 3c575B Fast Etherlink XL> port 0x1000-0x107f mem 0x88002000-0x8800207f,0x88002080-0x880020ff irq 11 at device 0.0 on cardbus0 xl0: Ethernet address: 00:50:04:94:a2:2f miibus0: <MII bus> on xl0 tdkphy0: <TDK 78Q2120 media interface> on miibus0 tdkphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto cardbus1: Resource not specified in CIS: id=14, size=80 cardbus1: Resource not specified in CIS: id=18, size=80 xl1: <3Com 3c575B Fast Etherlink XL> port 0x1080-0x10ff mem 0x88003000-0x8800307f,0x88003080-0x880030ff irq 11 at device 0.0 on cardbus1 xl1: Ethernet address: 00:50:04:e0:11:b7 miibus1: <MII bus> on xl1 tdkphy1: <TDK 78Q2120 media interface> on miibus1 tdkphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto GEOM: create disk ad0 dp=0xc1812670 ad0: 11513MB <TOSHIBA MK1214GAP> [23392/16/63] at ata0-master UDMA33 acd0: DVDROM <TOSHIBA DVD-ROM SD-C2402> at ata1-master PIO4 Mounting root from ufs:/dev/ad0s2a WARNING: /usr was not properly dismounted WARNING: /var was not properly dismounted ipfw2 initialized, divert disabled, rule-based forwarding enabled, default to deny, logging disabled uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xff80-0xff9f irq 11 at device 5.2 on pci0 usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered panic: softdep_setup_inomapdep: found inode panic: from debugger Uptime: 18m41s Dumping 191 MB 16 32 48 64 80 96 112 128 144 160 176 --- Reading symbols from /usr/src/sys/i386/compile/AKLEMM/modules/usr/src/sys/modules/acpi/acpi.ko.debug...done. Loaded symbols for /usr/src/sys/i386/compile/AKLEMM/modules/usr/src/sys/modules/acpi/acpi.ko.debug Reading symbols from /usr/src/sys/i386/compile/AKLEMM/modules/usr/src/sys/modules/msdosfs/msdosfs.ko.debug...done. Loaded symbols for /usr/src/sys/i386/compile/AKLEMM/modules/usr/src/sys/modules/msdosfs/msdosfs.ko.debug Reading symbols from /usr/src/sys/i386/compile/AKLEMM/modules/usr/src/sys/modules/ipfw/ipfw.ko.debug...done. Loaded symbols for /usr/src/sys/i386/compile/AKLEMM/modules/usr/src/sys/modules/ipfw/ipfw.ko.debug Reading symbols from /usr/src/sys/i386/compile/AKLEMM/modules/usr/src/sys/modules/nfsclient/nfsclient.ko.debug...done. Loaded symbols for /usr/src/sys/i386/compile/AKLEMM/modules/usr/src/sys/modules/nfsclient/nfsclient.ko.debug Reading symbols from /usr/src/sys/i386/compile/AKLEMM/modules/usr/src/sys/modules/nfsserver/nfsserver.ko.debug...done. Loaded symbols for /usr/src/sys/i386/compile/AKLEMM/modules/usr/src/sys/modules/nfsserver/nfsserver.ko.debug Reading symbols from /usr/src/sys/i386/compile/AKLEMM/modules/usr/src/sys/modules/usb/usb.ko.debug...done. Loaded symbols for /usr/src/sys/i386/compile/AKLEMM/modules/usr/src/sys/modules/usb/usb.ko.debug Reading symbols from /boot/kernel/logo_saver.ko...done. Loaded symbols for /boot/kernel/logo_saver.ko Reading symbols from /usr/src/sys/i386/compile/AKLEMM/modules/usr/src/sys/modules/linux/linux.ko.debug...done. Loaded symbols for /usr/src/sys/i386/compile/AKLEMM/modules/usr/src/sys/modules/linux/linux.ko.debug #0 doadump () at ../../../kern/kern_shutdown.c:240 240 dumping++; (kgdb) (kgdb) where #0 doadump () at ../../../kern/kern_shutdown.c:240 #1 0xc01babc7 in boot (howto=260) at ../../../kern/kern_shutdown.c:372 #2 0xc01bafa8 in panic () at ../../../kern/kern_shutdown.c:550 #3 0xc01231e2 in db_panic () at ../../../ddb/db_command.c:450 #4 0xc0123142 in db_command (last_cmdp=0xc03438c0, cmd_table=0x0, aux_cmd_tablep=0xc031c550, aux_cmd_tablep_end=0xc031c554) at ../../../ddb/db_command.c:346 #5 0xc0123285 in db_command_loop () at ../../../ddb/db_command.c:472 #6 0xc01262a5 in db_trap (type=3, code=0) at ../../../ddb/db_trap.c:73 #7 0xc02c82cc in kdb_trap (type=3, code=0, regs=0xd323d6fc) at ../../../i386/i386/db_interface.c:171 #8 0xc02d9c7a in trap (frame= {tf_fs = 24, tf_es = -752680944, tf_ds = -1071644656, tf_edi = 1, tf_esi = -1070522127, tf_ebp = -752625848, tf_isp = -752625880, tf_ebx = 0, tf_edx = 0, tf_ecx = 32, tf_eax = 18, tf_trapno = 3, tf_err = 0, tf_eip = -1070824060, tf_cs = 8, tf_eflags = 646, tf_esp = -1070500194, tf_ss = -1070555829}) at ../../../i386/i386/trap.c:578 #9 0xc02c9cb8 in calltrap () at {standard input}:102 #10 0xc01baee5 in panic (fmt=0xc03120f1 "softdep_setup_inomapdep: found inode") at ../../../kern/kern_shutdown.c:534 #11 0xc026ab06 in softdep_setup_inomapdep (bp=0xc553eb00, ip=0x0, newinum=0) at ../../../ufs/ffs/ffs_softdep.c:1278 #12 0xc025c2f2 in ffs_nodealloccg (ip=0xc1c677a8, cg=0, ipref=14406, mode=33188) at ../../../ufs/ffs/ffs_alloc.c:1611 #13 0xc025b097 in ffs_hashalloc (ip=0xc1c677a8, cg=0, pref=0, size=33188, allocator=0xc025c000 <ffs_nodealloccg>) at ../../../ufs/ffs/ffs_alloc.c:1155 #14 0xc025a7ae in ffs_valloc (pvp=0xc1cac124, mode=33188, cred=0xc1920580, vpp=0xd323d8b8) at ../../../ufs/ffs/ffs_alloc.c:857 #15 0xc0285429 in ufs_makeinode (mode=33188, dvp=0xc1cac124, vpp=0xd323dbe0, cnp=0xd323dbf4) at ../../../ufs/ufs/ufs_vnops.c:2357 #16 0xc0281949 in ufs_create (ap=0xd323da40) at ../../../ufs/ufs/ufs_vnops.c:199 #17 0xc0285bf8 in ufs_vnoperate (ap=0x0) at ../../../ufs/ufs/ufs_vnops.c:2792 #18 0xc0225abe in vn_open_cred (ndp=0xd323dbcc, flagp=0xd323dccc, cmode=420, cred=0xc1920580, fdidx=0) at vnode_if.h:118 #19 0xc0225910 in vn_open (ndp=0x0, flagp=0x0, cmode=0, fdidx=0) at ../../../kern/vfs_vnops.c:93 #20 0xc021ead3 in kern_open (td=0xc180ce40, path=0x0, pathseg=UIO_USERSPACE, flags=522, mode=438) at ../../../kern/vfs_syscalls.c:688 #21 0xc021e960 in open (td=0x0, uap=0x0) at ../../../kern/vfs_syscalls.c:654 #22 0xc02da630 in syscall (frame= {tf_fs = 134938671, tf_es = 135004207, tf_ds = -1078001617, tf_edi = 8, tf_esi = 674821400, tf_ebp = -1077939896, tf_isp = -752624268, tf_ebx = 674746852, tf_edx = 521, tf_ecx = 134995387, tf_eax = 5, tf_trapno = 12, tf_err = 2, tf_eip = 674241311, tf_cs = 31, tf_eflags = 518, tf_esp = -1077939940, tf_ss = 47}) at ../../../i386/i386/trap.c:1006 #23 0xc02c9d0d in Xint0x80_syscall () at {standard input}:144 ---Can't read userspace from dump, or kernel process--- Andreas /// -- Andreas Klemm - Powered by FreeBSD 5.1-CURRENT Need a magic printfilter today ? -> http://www.apsfilter.org/
machine i386 cpu I686_CPU ident AKLEMM options INCLUDE_CONFIG_FILE # Include this file in kernel makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols options SCHED_4BSD #4BSD scheduler #options SCHED_ULE options INET #InterNETworking options FFS #Berkeley Fast Filesystem options SOFTUPDATES #Enable FFS soft updates support options UFS_ACL #Support for access control lists options UFS_DIRHASH #Improve performance on big directories options MD_ROOT #MD is a potential root device options PROCFS #Process filesystem (requires PSEUDOFS) options PSEUDOFS #Pseudo-filesystem framework options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!] options COMPAT_FREEBSD4 #Compatible with FreeBSD4 options KTRACE #ktrace(1) support options SYSVSHM #SYSV-style shared memory options SYSVMSG #SYSV-style message queues options SYSVSEM #SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING #Posix P1003_1B real-time extensions options KBD_INSTALL_CDEV # install a CDEV entry in /dev options NMBCLUSTERS=4096 # Number of mbuf clusters options ZERO_COPY_SOCKETS options RANDOM_IP_ID #options DUMMYNET options SHOW_BUSYBUFS # List buffers that prevent root unmount # Debugging for use in -current options DDB #Enable the kernel debugger device isa device pci # Floppy drives device fdc # ATA and ATAPI devices device ata device atadisk # ATA disk drives device atapicd # ATAPI CDROM drives device atapifd # ATAPI floppy drives options ATA_STATIC_ID #Static device numbering # atkbdc0 controls both the keyboard and the PS/2 mouse device atkbdc # AT keyboard controller device atkbd # AT keyboard device psm # PS/2 mouse device vga # VGA video card driver device splash # Splash screen and screen saver support # syscons is the default console driver, resembling an SCO console device sc options MAXCONS=8 options SC_HISTORY_SIZE=512 # number of history buffer lines options VESA # support VGA VESA video modes device agp # support several AGP chipsets # Floating point support - do not disable. device npx # Power management support (see NOTES for more options) #device apm # Add suspend/resume support for the i8254. device pmtimer # PCCARD (PCMCIA) support # Pcmcia and cardbus bridge support device cbb # cardbus (yenta) bridge #device pcic # ExCA ISA and PCI bridges device pccard # PC Card (16-bit) bus device cardbus # CardBus (32-bit) bus # Serial (COM) ports device sio # 8250, 16[45]50 based serial ports # Parallel port device ppc device ppbus # Parallel port bus (required) device lpt # Printer device plip # TCP/IP over parallel device ppi # Parallel port interface device #device vpo # Requires scbus and da # PCI Ethernet NICs that use the common MII bus controller code. # NOTE: Be sure to keep the 'device miibus' line in order to use these NICs! device miibus # MII bus support device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'') # Pseudo devices - the number indicates how many units to allocate. device random # Entropy device device loop # Network loopback device ether # Ethernet support device pty # Pseudo-ttys (telnet etc) device md # Memory "disks" # The `bpf' device enables the Berkeley Packet Filter. # Be aware of the administrative consequences of enabling this! device bpf # Berkeley packet filter device snp #Snoop device - to look at pty/vty/etc..
_______________________________________________ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to "[EMAIL PROTECTED]"