Re: New computer....help wanted :-S
- Original Message - From: "M. Warner Losh" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]> Sent: Wednesday, September 01, 2004 4:36 AM Subject: Re: New computerhelp wanted :-S > This looks like some kind of resource problem: > > : > 0xc800-0x8ff irq 22 at device 10.0 on pci1 rl0: reset never > > > that's crazy man. Is that really what it prints, or the the 'c' > missing and it actually allocates: > > 0xc800-0xc8ff irq 22 at device 10.0 on pci1 Ah sorry, yes the 'c' was missing, so 0xc800-0xc8ff is correct. br db ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-hackers To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: New computer....help wanted :-S
In message: <[EMAIL PROTECTED]> John Baldwin <[EMAIL PROTECTED]> writes: : On Tuesday 31 August 2004 07:36 am, db wrote: : > Hi : > : > Got my new computer with an Intel 915g MB and an Intel 3.0GHZ CPU. FreeBSD : > can't find the onboard NIC, but nevermind I got a Rubytech gigabit NIC. : > Sadly though, it can't find that either, so I tried my old 10/100 realtek : > card, but it can't use it. So I have 3 NIC's in the computer, but 0 : > working. When I in BIOS set the OS PnP to yes, I get: : : Set it to no. FreeBSD 5 only sort of works with it set to yes. What's the breakage? : > pcib5 at device 30.0 on pci0 : > pcib5 device re0 requested unsupported I/O range 0x0-0x0 (decoding : > 0x9000-0xafff) re0: couldn't map ports/memory : > This is my gigabit card and it says the same about my rl0 (realtek). : > : > When I set OS PnP to no, I get: : > rl0: port 0xa400-0xa4ff mem : > 0xc800-0x8ff irq 22 at device 10.0 on pci1 rl0: reset never : > completed! : > rl0: Ethernet address ff:ff:ff:ff:ff:ff : > rl0: unknown device ID: : > device_probe_and_attach: rl0 attach returned 6 : > It doesn't say anything about re0. : : Well, FreeBSD is still not able to talk to the card ok. Not sure why, but PCI : express changes several things including how one talks to PCI cards, so the : fact that it is a PCI express chipset may break things enough for it not to : work right now. This looks like some kind of resource problem: : > 0xc800-0x8ff irq 22 at device 10.0 on pci1 rl0: reset never that's crazy man. Is that really what it prints, or the the 'c' missing and it actually allocates: 0xc800-0xc8ff irq 22 at device 10.0 on pci1 which would make more sense. Since it is behind a bridge, that might also have some impact on as well. That's what the pcib5 thing is saying, I think. Warner ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-hackers To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: New computer....help wanted :-S
On Tuesday 31 August 2004 07:36 am, db wrote: > Hi > > Got my new computer with an Intel 915g MB and an Intel 3.0GHZ CPU. FreeBSD > can't find the onboard NIC, but nevermind I got a Rubytech gigabit NIC. > Sadly though, it can't find that either, so I tried my old 10/100 realtek > card, but it can't use it. So I have 3 NIC's in the computer, but 0 > working. When I in BIOS set the OS PnP to yes, I get: Set it to no. FreeBSD 5 only sort of works with it set to yes. > pcib5 at device 30.0 on pci0 > pcib5 device re0 requested unsupported I/O range 0x0-0x0 (decoding > 0x9000-0xafff) re0: couldn't map ports/memory > This is my gigabit card and it says the same about my rl0 (realtek). > > When I set OS PnP to no, I get: > rl0: port 0xa400-0xa4ff mem > 0xc800-0x8ff irq 22 at device 10.0 on pci1 rl0: reset never > completed! > rl0: Ethernet address ff:ff:ff:ff:ff:ff > rl0: unknown device ID: > device_probe_and_attach: rl0 attach returned 6 > It doesn't say anything about re0. Well, FreeBSD is still not able to talk to the card ok. Not sure why, but PCI express changes several things including how one talks to PCI cards, so the fact that it is a PCI express chipset may break things enough for it not to work right now. -- John Baldwin <[EMAIL PROTECTED]> <>< http://www.FreeBSD.org/~jhb/ "Power Users Use the Power to Serve" = http://www.FreeBSD.org ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-hackers To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Install problem
hi what kind of FreeBSD version did you use? i have a toshiba notebook to, satellite 1100-z20. i could run the setup at freebsd 5.0 or greater regards, michael calebsbc wrote: Hi I have a Toshiba Dynabook PIII 240mb ram and 4ogb hdd with other tid bits. When I boot the laptop in FreeBSD to install (floppy for cd) it goes past the first screen that does the count down and then boot the os but when it gets to the usb0: loader it freezes. Is this a common problem and is there a way around this. I tired to disable the USB module but to no avail. Any help on this matter would be great. Thanks Caleb ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-hackers To unsubscribe, send any mail to "[EMAIL PROTECTED]" -- Mit freundlichen Grüßen Michael Hollmann JAWA Management Software GmbH A-8041 Graz, Liebenauer Hauptstraße 200 Tel: ++43 (0)316 403274-13 Fax: ++43 (0)316 403274-10 GSM: ++43 (0)676 4101431 E-Mail: [EMAIL PROTECTED] Web: http://www.jawa.at/ ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-hackers To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Library (ab)use in kernel land
On Sat, Aug 28, 2004 at 01:40:50PM -0700, Brian O'Shea wrote: > That being said, there are a few analogs of the standard C > library functions in the kernel, such as printf, strcpy, bcmp, > qsort, etc. You can find sources for them in src/sys/libkern/ > with prototypes in the src/sys/sys/libkern.h and src/sys/sys/systm.h > header files. And manual pages in section 9 of the manual, eg: $ man 9 printf will give you the docs for the printf that you can call in kernelspace. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-hackers To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: probe ordering of interfaces
In <[EMAIL PROTECTED]>, Barry Bouwsma <[EMAIL PROTECTED]> typed: > [please drop me from replies and keep it on the list] > Even more specifically, I have a drive that I either attach > via firewire on one machine, or via USB on a different box. > I wish this drive to always be da0. I can connect it to a > suitably ordered uhub slot in order to guarantee all other > USB devices get da1-whatever. However, it seems that umass > devices get attached to da* before firewire. You can do this in the config file. My 5.x box is down now, so I'll quote from my 4.9 box with the same problem - a USB card reader that turns up as da0 in the default scanning order. Here's the extract from the config file that solves the problem: # SCSI Controllers device ahc0# AHA2940 and onboard AIC7xxx devices device ahc # AHA2940 and onboard AIC7xxx devices # SCSI peripherals device scbus0 at ahc0 # SCSI bus (required) device scbus # SCSI bus (required) device da # Direct Access (disks) scbus0 is scanned first. I wired it down to ahc0. The occurence of ahc following ahc0 is because I have two ahc's in the box. The scbus following scbus0 will cause the second ahc and the usb scbus's to be found and scanned. Camcontrol devlist looks like this: at scbus0 target 0 lun 0 (pass0,da0) at scbus0 target 1 lun 0 (pass1,da1) at scbus0 target 3 lun 0 (pass2,da2) at scbus0 target 4 lun 0 (pass3,cd0) at scbus1 target 0 lun 0 (pass4,da3) at scbus2 target 5 lun 0 (pass5,cd1) As you can see, scsbus0 is the first ahc, scbus1 is the card reader, and scbus2 is the second ahc. http://www.mired.org/consulting.html Independent Network/Unix/Perforce consultant, email for more information. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-hackers To unsubscribe, send any mail to "[EMAIL PROTECTED]"
New computer....help wanted :-S
Hi Got my new computer with an Intel 915g MB and an Intel 3.0GHZ CPU. FreeBSD can't find the onboard NIC, but nevermind I got a Rubytech gigabit NIC. Sadly though, it can't find that either, so I tried my old 10/100 realtek card, but it can't use it. So I have 3 NIC's in the computer, but 0 working. When I in BIOS set the OS PnP to yes, I get: pcib5 at device 30.0 on pci0 pcib5 device re0 requested unsupported I/O range 0x0-0x0 (decoding 0x9000-0xafff) re0: couldn't map ports/memory This is my gigabit card and it says the same about my rl0 (realtek). When I set OS PnP to no, I get: rl0: port 0xa400-0xa4ff mem 0xc800-0x8ff irq 22 at device 10.0 on pci1 rl0: reset never completed! rl0: Ethernet address ff:ff:ff:ff:ff:ff rl0: unknown device ID: device_probe_and_attach: rl0 attach returned 6 It doesn't say anything about re0. So what is up with this? I know FreeBSD doesn't support pci express, but I haven't got any cards in any of the 2 pci express slots, so why all these problems? I haven't tried to find my onboard soundcard or graphics card, but I'm guessing it wouldn't be pretty :-( Btw I'm running 5.2.1 (4.10 couldn't find the gigabit card) and I'm downloading 5.3-BETA2 (hoping this will solve the problem). br db ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-hackers To unsubscribe, send any mail to "[EMAIL PROTECTED]"