Re: jail on 5.4
On Jun 3, 2005, at 9:56 PM, dave wrote: Hello, Trying to set up a jail on 5.4-RELEASE. I've installed the 5_4_0_RELEASE source from cvsup and have successfully run: make buildworld DESTDIR=/usr/local/jails/jail1 this runs successfully but when i do: cd /usr/src/etc make distribution DESTDIR=/usr/local/jails/jail1 the process proceeds for a moment installing then it exits on the master.passwd file, error code 64, install complains about the wrong number of arguments. I've tried cvsupping to 5.stable, same results. Any suggestions welcome. I don't have an answer but just a couple days ago I installed from the ISO 5.4-RELEASE and then used cvsup RELENG_5_4. I then made a jail without problem just like you did above. make distribution had no problems and the jail works fine. I did not actually use the master.passwd file from the jail as I had a tarred up etc for my jails but in doing the build it did not error out. So maybe you want to start from scratch and try again? Chad ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: P4B533 vs DDR Ram 400 MHz
On Jun 3, 2005, at 10:42 PM, Supote Lee wrote: What if I using both of them together ? I mean using both DDR-266 and DDR-400 at the same time. Can I ? I believe that the MB will time it to the DDR-266. I doubt it will run some at DDR-400 speeds and some at DDR-266 speeds. Chad ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
diablo-caffe-1.3.1-0.tar.bz2
Does anyone know a place where i can download diablo-caffe-1.3.1-0.tar.bz2 ? the main usual site is down/not working -- Yours Sincerely Shinjii http://www.shinji.nq.nu ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: jail on 5.4
On Saturday 04 June 2005 05:56:05, dave wrote: Hello, Trying to set up a jail on 5.4-RELEASE. I've installed the 5_4_0_RELEASE source from cvsup and have successfully run: make buildworld DESTDIR=/usr/local/jails/jail1 The fine manual says make world DESTDIR=$D. If you run buildworld only, you need to run the installworld target, too (make world includes the buildworld and the installworld target). Cheers, ch -- Christian Hiris [EMAIL PROTECTED] | OpenPGP KeyID 0x3BCA53BE OpenPGP-Key at hkp://wwwkeys.eu.pgp.net and http://pgp.mit.edu pgpsom6gmRVuh.pgp Description: PGP signature
[HP Scanjet 5200C] Very slow scanning
Hi folks, I have a 5200C scanner which is detected by FreeBSD. uscanner0: Hewlett-Packard HP ScanJet 5200C, rev 1.00/1.00, addr 2 [EMAIL PROTECTED] usbdevs -v Controller /dev/usb0: addr 1: full speed, self powered, config 1, OHCI root hub(0x), nVidia(0x), rev 1.00 port 1 powered port 2 addr 2: full speed, self powered, config 1, Scanjet 5200C(0x0401), Hewlett Packard(0x03f0), rev 1.00 port 3 powered Controller /dev/usb1: addr 1: full speed, self powered, config 1, OHCI root hub(0x), nVidia(0x), rev 1.00 port 1 addr 2: low speed, power 98 mA, config 1, USB-PS/2 Optical Mouse(0xc01b), Logitech(0x046d), rev 18.00 port 2 powered port 3 powered I run the program xsane as root(to avoid right issues). (The following is all at 150 dpi(which is very low))). When I select the lineart or half-tone option, scanning takes 20 seconds or so (still slow), but it works. When I select greyscale, it takes 15 minutes, but works. When I select color, it doesn't return within 40 minutes (and don't know whether it ever will). The issue is exactly the same as this one (but it's not clear what the endresult was): http://lists.freebsd.org/pipermail/freebsd-questions/2004-June/049002.html I hope someone has solved this problem and could help me. Thanks in advance, Ron ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Maxima 5.9.1 problems
On Jun 3, 2005, at 6:17 AM, Craig Kleski wrote: On Friday 03 June 2005 11:46 am, Anthony M. Agelastos wrote: Hello all, I am experiencing some problems with Maxima, namely with the plotting and with some of the self tests. For the former, it only creates the plots in an external Gnuplot window, even if I go to [Options] / [Plot Windows] / [Embedded]. I am primarily familiar with embedded plots and their ability to rotate with the mouse (left or middle click I do believe), but I also assumed the same could be done with the [Separate] plot windows but on this version it cannot. Then, to satisfy my own curiosity, I did [Maxima] / [Run Tests] and there were multiple problems. In case it is desired, I am running FreeBSD 5.4-STABLE (see uname output below) with a kernel that is GENERIC+SSE. Any assistance would be greatly appreciated. Thank you. Oh, just in case it is also needed, Maxima 5.9.1 is using LIsp CMU Common Lisp 19a (should be the default because I didn't change any settings). ast# uname -a FreeBSD ast.home.iq 5.4-STABLE FreeBSD 5.4-STABLE #0: Sun May 29 10:30:27 EDT 2005 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/IQKERNEL i386 ## Test Output ## Running tests in rtest1.mac: 28/28 tests passed. Running tests in rtest1a.mac: 23/23 tests passed. Running tests in rtest2.mac: 47/47 tests passed. Running tests in rtest4.mac: 82/82 tests passed. Running tests in rtest5.mac: 51/51 tests passed. Running tests in rtest6.mac: 4/4 tests passed. Running tests in rtest6a.mac: 56/56 tests passed. Running tests in rtest6b.mac: 16/16 tests passed. Running tests in rtest7.mac: 41/41 tests passed. Running tests in rtest9.mac: 77/77 tests passed. Running tests in rtest9a.mac: 18/18 tests passed. Running tests in rtest10.mac: 38/38 tests passed. Running tests in rtest11.mac: 86/86 tests passed. Running tests in rtest13.mac: 24/24 tests passed. Running tests in rtest13s.mac: 16/16 tests passed. Running tests in rtest14.mac: 64/64 tests passed. Running tests in rtest15.mac: ; ; Warning: This variable is undefined: ; |$i| ; ; ; Warning: This variable is undefined: ; |$i| ; 142/142 tests passed. Running tests in rtestode.mac: 64/64 tests passed. Running tests in rtestode_zp.mac: 30/30 tests passed. Running tests in rtestflatten.mac: 32/32 tests passed. Running tests in rtest3.mac: ** Problem 94 *** Input: TRIGSIMP(%) Result: 42 3 SINH (X) + (COSH (X) + 1) SINH (X) -- 5 COSH (X) This differed from the expected result: 3 45 2 SINH (X) + SINH (X) + SINH (X) 5 COSH (X) 93/94 tests passed. The following 1 problem failed: (94) Running tests in rtest8.mac: 50/50 tests passed. Running tests in rtest12.mac: 74/74 tests passed. Running tests in rexamples.mac: 136/136 tests passed. Error summary: Error found in /usr/local/share/maxima/5.9.1/tests/rtest3.mac, problem: (94) ## End Test Output ## ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] I don't have a solution to your problem, but I have also noticed that embedded plotting does not seem to work. I glanced quickly at the Makefile but noticed nothing pertinent; however I haven't spent any time looking for a solution. When I run the tests, I do not get the same error as you. I also run CMUCL. If you run the test several times, do you always get that error? Nope. Actually, I ran the test a few times (see output to follow). The first time, there were no errors. Then, when I exited the command, I noticed that there were some additional error messages (see those below the test errors). Any insight? # TEST ERRORS # (%i1) Running tests in rtest1.mac: 28/28 tests passed. Running tests in rtest1a.mac: 23/23 tests passed. Running tests in rtest2.mac: 47/47 tests passed. Running tests in rtest4.mac: 82/82 tests passed. Running tests in rtest5.mac: 51/51 tests passed. Running tests in rtest6.mac: 4/4 tests passed. Running tests in rtest6a.mac: 56/56 tests passed. Running tests in rtest6b.mac: 16/16 tests passed. Running tests in rtest7.mac: 41/41 tests passed. Running tests in rtest9.mac: 77/77 tests passed. Running tests in rtest9a.mac: 18/18 tests passed. Running tests in rtest10.mac: 38/38 tests passed. Running tests in rtest11.mac: 86/86 tests passed. Running tests in rtest13.mac: 24/24 tests passed. Running tests in rtest13s.mac: 16/16 tests passed. Running tests in rtest14.mac: 64/64 tests passed. Running tests in rtest15.mac: ; ; Warning: This variable is undefined: ; |$i| ; ; ; Warning: This variable is undefined: ; |$i| ; 142/142 tests passed. Running tests in rtestode.mac: 64/64 tests passed. Running tests in rtestode_zp.mac: 30/30 tests passed. Running tests in rtestflatten.mac: 32/32 tests
x
hi i need help. my english is little, then i hope that you understand me. well i use freebsd 5.3 i installed xorg and kde. i execute startkde and it appears this: kpersonalizer: can not connect Xserver i execute kdm or xdm and it appear welcome freebsd later i have to log the user, when i do this the screen appears black and it reappears (welcome freebsd) i execute startx and it appears the xterm later i type startkde and the desktop is up but there are two desktop xterm and kde and i can´t work. i hope that u understand and thank u very much. __ Correo Yahoo! Espacio para todos tus mensajes, antivirus y antispam ¡gratis! Regístrate ya - http://correo.espanol.yahoo.com/ ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
RE: can't figure out ssh, read lots of docs...
On Fri, 2005-06-03 at 10:03 -0400, fbsd_user wrote: The abuse-reporting-system scripts can be downloaded from http://www.unixguide.net/freebsd/fbsd_installguide/index.phpor http://freebsd.packards-home.net/index.php It was submitted to FreeBSD as a port but not accepted yet. Until it is you can use this one: # cd /usr/ports make search name=ppars Port: ppars-1.0 Path: /usr/ports/security/ppars Info: Proactive Probing Abuse Reporting System Maint: [EMAIL PROTECTED] B-deps: perl-5.8.6_2 R-deps: p5-Net-Netmask-1.9012 perl-5.8.6_2 WWW:http://www.dshield.org/linux_clients.php#freebsd ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
FBSD 5.4 internet connection ???
Hello, I installed my FBSD 5.4. I have a DSL internet conection. It is configurated as DHCP but it works slowly. What could I do ?? Thanks, Regi ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: x
On Friday 03 June 2005 10:44 am, jose luis wrote: hi i need help. my english is little, then i hope that you understand me. well i use freebsd 5.3 i installed xorg and kde. i execute startkde and it appears this: kpersonalizer: can not connect Xserver i execute kdm or xdm and it appear welcome freebsd later i have to log the user, when i do this the screen appears black and it reappears (welcome freebsd) i execute startx and it appears the xterm later i type startkde and the desktop is up but there are two desktop xterm and kde and i can´t work. i hope that u understand and thank u very much. Is the command 'startkde' in the .xinitrc file in your home directory? If not, try adding it to the file, then execute 'startx'. This section of the online handbook may be of help: http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/x11.html Good luck, Andrew Gould ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Postfix Problem (urgent)
Raciel Perez Hernandez wrote: Helo list I have postfix installed and working, it only have a problem, I connect to internet trougth a leased line of 144Kbs but this line sometimes gets unstable and goes down, so if the connection is down and somebody try to send a message, postfix tells me (Server replied: 450 [EMAIL PROTECTED]: Recipient address rejected: Domain not found) and reject the message, I put this two lines on the main.cf file without any results disable_dns_lookups=yes and deffer_transport=smtp but postfix do not hear me, I need postfix put mail on the queue even if is connected or not, rigth now it represent a big problem to me Best Regards. There is my main.cf file. smtpd_recipient_restrictions = reject_invalid_hostname, reject_non_fqdn_sender, reject_non_fqdn_recipient, reject_unknown_sender_domain, reject_unknown_recipient_domain, check_sender_access proxy:mysql:/etc/postfix/mysql-sender-access.cf, permit_sasl_authenticated, permit_mynetworks, #reject_unauth_destination, #permit_sasl_authenticated, reject_unauth_pipelining, reject The problem is the order of your recipient restrictions. Move permit_sasl_authenticated and permit_mynetworks above reject_unknown_sender_domain. Jim ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
inbound ssh ceased on 4 servers at same time
Yesterday at about noon, all four freebsd servers on a clients lan quit accepting ssh connections. All were running 4.11-release-p4, and had been cvsup'd at the same time from cvs-10, cvs-11, or cvs-12. Outbound ssh (from console of the affected boxes) works as expected, both to local openbsd boxes and to remote locations. There are no host based firewalls involved, and all other network services are operating correctly. Netstat shows port 22 as listening. At 11:20 am (40 minutes earlier), ssh was working properly on all boxes. Has anybody encountered a situation like this before? -- John Brooks [EMAIL PROTECTED] ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
no subject
___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Maxima 5.9.1 problems
On Saturday 04 June 2005 12:16 pm, you wrote: On Jun 3, 2005, at 6:17 AM, Craig Kleski wrote: On Friday 03 June 2005 11:46 am, Anthony M. Agelastos wrote: Hello all, I am experiencing some problems with Maxima, namely with the plotting and with some of the self tests. For the former, it only creates the plots in an external Gnuplot window, even if I go to [Options] / [Plot Windows] / [Embedded]. I am primarily familiar with embedded plots and their ability to rotate with the mouse (left or middle click I do believe), but I also assumed the same could be done with the [Separate] plot windows but on this version it cannot. Then, to satisfy my own curiosity, I did [Maxima] / [Run Tests] and there were multiple problems. In case it is desired, I am running FreeBSD 5.4-STABLE (see uname output below) with a kernel that is GENERIC+SSE. Any assistance would be greatly appreciated. Thank you. Oh, just in case it is also needed, Maxima 5.9.1 is using LIsp CMU Common Lisp 19a (should be the default because I didn't change any settings). ast# uname -a FreeBSD ast.home.iq 5.4-STABLE FreeBSD 5.4-STABLE #0: Sun May 29 10:30:27 EDT 2005 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/IQKERNEL i386 [snip] I just ran the test once with no errors. I ran it again and got Error found in /usr/local/share/maxima/5.9.1/tests/rtest1.mac, problem: (10) Error found in /usr/local/share/maxima/5.9.1/tests/rtest15.mac, problem: (46) Error found in /usr/local/share/maxima/5.9.1/tests/rtest12.mac, problem: (20) If I restart maxima from the menu, this pattern repeats -- one run is fine, the next has errors. We seem to be having the same problem. I found this: http://sourceforge.net/tracker/index.php?func=detailaid=1116091group_id=4933atid=104933 Apparently this has been solved in the CVS version of maxima. As for 3d plotting, I don't know the solution to that problem. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: P4B533 vs DDR Ram 400 MHz
On Jun 4, 2005, at 12:42 AM, Supote Lee wrote: What if I using both of them together ? I mean using both DDR-266 and DDR-400 at the same time. Can I ? Yes, if you make sure that both DIMMs accept the same voltage range. The memory should work at DDR-266 speeds, but you may need to back off the memory timings (ie, go to CAS-3) for the system to be stable. For example, I have one system which was using a 512MB PC2700 (DDR-266?) DIMM, and I added a 1GB PC3500 DIMM. It would work fine at PC2100 (DDR-233), and almost work fine at PC2700-- but would generate a memtest error every few hours. almost stable isn't good enough. Since the system ran faster using just the 1GB stick at full speed, rather than trying to combine both, I've moved the 512MB stick elsewhere. If you do combine memory of different speeds, be sure to test the combination out overnight using memtest or some similar utility. -- -Chuck ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
DWL-G520 problem in FreeBSD 5.4
Hi, I'm trying to setup my Card Dwl-G520 in FreeBSD 5.4 and not working. I try: kldload if_ath.ko and dmesg output is: ath0: Atheros 5212 mem 0xff7f-0xff7f irq 21 at device 0.0 on pci6 ath0: unable to attach hardware; HAL status 13 device_attach: ath0 attach returned 6 error: HAL status 13=Hardware revision not supported strange, my card work in Linux (driver madwifi) perfectly. Any idea? thanks, Luis Pd: sorry my bad english, i am speak spanish ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
FreeBSD 5.4 Xwindows
Hiya, I've been trying to figure this out. I've tried googling for an answer but only got confused. I have a P4 machine with an ATI Radeon 9200 with 128Mbyte of memory built into the motherboard. I have not been able to get Xwindows to run at any greater resolution than basic VGA. All I seam to get is no driver or no screen defined. Goggle troughs up some info but for linux. Can anybody help please. Rob ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
issues with make world
tried to upgrade with cvsup and everything always giving me the same error .. what should i do ? cd /usr/src/etc; install -o root -g wheel -m 444 amd.map apmd.conf auth.conf crontab csh.cshrc csh.login csh.logout dhclient.conf dm.conf fbtab ftpusers gettytab group hosts hosts.allow host.conf hosts.equiv hosts.lpd inetd.conf login.access login.conf motd modems networks newsyslog.conf pam.conf phones printcap profile protocols rc rc.atm rc.diskless1 rc.diskless2 rc.firewall rc.firewall6 rc.network rc.network6 rc.pccard rc.sendmail rc.serial rc.shutdown rc.syscons rc.sysctl remote rpc services shells sysctl.conf syslog.conf usbd.conf etc.i386/disktab etc.i386/rc.i386 etc.i386/ttys /usr/src/etc/../gnu/usr.bin/man/manpath/manpath.config /usr/src/etc/../usr.bin/mail/misc/mail.rc /usr/src/etc/../usr.bin/locate/locate/locate.rc rc.isdn netstart pccard_ether rc.suspend rc.resume nsmb.conf opieaccess /usr/share/examples/etc cd /usr/src/etc/defaults; install -o root -g wheel -m 444 rc.conf make.conf pccard.conf periodic.conf /usr/share/examples/etc/defaults make: don't know how to make copies. Stop *** Error code 2 Stop in /usr/src/share. *** Error code 1 Stop in /usr/src. *** Error code 1 Stop in /usr/src. *** Error code 1 Stop in /usr/src. *** Error code 1 Stop in /usr/src. vds4# pwd ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Securelevel 2 VS OpenNTPd
Hello, I'm about to use ntpd to synchronise my server's clock to a time server and also provide time server, but I use securelevel 2 that denies to change the system time with a step greater than 1s. So, I'm afraid it could work with securelevel 2. Is there any method to get them work with each other? Cheers, Gábor Kövesdán P.S.: Please cc me when reply since I'm not subscribed. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Securelevel 2 VS OpenNTPd
On Sat, Jun 04, 2005 at 08:08:04PM +0200, Kövesdán Gábor wrote: Hello, I'm about to use ntpd to synchronise my server's clock to a time server and also provide time server, but I use securelevel 2 that denies to change the system time with a step greater than 1s. So, I'm afraid it could work with securelevel 2. Is there any method to get them work with each other? ntpd normally changes time in steps much smaller than 1s. The exception is at boottime where it might be necessary to make a large change, but this normally happens before the securelevel is raised. In short, there shouldn't be any problems. -- Insert your favourite quote here. Erik Trulsson [EMAIL PROTECTED] ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
FBSD 5.4 internet connection ???
# rc.conf # linux_enable=YES moused_enable=YES moused_port=/dev/psm0 moused_type=auto hostname=leopardo.regi.org nfs_server_enable=YES nfs_server_flags=-u -t -6 rpcbind_enable=YES usbd_enable=YES ifconfig_em0=DHCP --- #hosts --- 127.0.0.1localhostlocalhost.regi.org --- #host.conf --- hosts bind --- #ifconfig --- em0:flags=8843UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST mtu 1500 options=bRXCSUM,TXCSUM,VLAN_MTU inet6fe80::20b : : dbff : fee0 : 4b50%em0 prefixlen 64 scopeid 0xl inet192.168.1.34netmask0xff00 broadcast 192.168.1.255 ether00 : 0b : db : e0 : 4b : 50 media:Ethernet autoselect (100baseTX full-duplex) status: active plip0: flags=108810POINTOPOINT,SIMPLEX,MULTICAST mtu 1500 lo0: flags=8049UP,LOOPBACK,RUNNING,MULTICAST mtu 16384 inet127.0.0.1netmask 0xff00 inet6: : 1prefixlen128 inet6fe80: :1%lo0 prefixlen 64 scopeid 0x3 - Original Message - From: fbsd_user [EMAIL PROTECTED] To: Reginaldo Tavares [EMAIL PROTECTED] Sent: Saturday, June 04, 2005 3:23 PM Subject: RE: FBSD 5.4 internet connection ??? post all the config files you modified to get your DSL working. Also post output of ifconfig -a command and rc.conf -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Reginaldo Tavares Sent: Saturday, June 04, 2005 9:22 AM To: [EMAIL PROTECTED] Subject: FBSD 5.4 internet connection ??? Hello, I installed my FBSD 5.4. I have a DSL internet conection. It is configurated as DHCP but it works slowly. What could I do ?? Thanks, Regi ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: inbound ssh ceased on 4 servers at same time
At 09:05 AM 6/4/2005, you wrote: Yesterday at about noon, all four freebsd servers on a clients lan quit accepting ssh connections. All were running 4.11-release-p4, and had been cvsup'd at the same time from cvs-10, cvs-11, or cvs-12. Outbound ssh (from console of the affected boxes) works as expected, both to local openbsd boxes and to remote locations. There are no host based firewalls involved, and all other network services are operating correctly. Netstat shows port 22 as listening. At 11:20 am (40 minutes earlier), ssh was working properly on all boxes. Has anybody encountered a situation like this before? Not specifically, but the first things I would check: is sshd running on the affected machines? when trying to connect to the affected machines, do the clients give any error messages? or does the connection just time out? are there any relevant entries in the log files on the affected machines? specifically /var/log/messages and /var/log/auth.log are the affected machines using the same name server? and if they are, can the affected machines do forward and reverse lookups for the IP of the system you are trying to connect from? -Glenn -- John Brooks [EMAIL PROTECTED] ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
FreeBSD 5.4 Xwindows
First things first. What module did you load for the card. My guess (because I did this myself) was to use ATI, but you need RADEON. And, in the sysinstall setup for video, you most likely selected vga, sometimes vesa works better! Now the fun part. If you look in Xorg.conf, you will see the screen resolution selections.(Sorry, I will let you find that setup file for yourself=better to remember for future changes!) Yours will indicate 640x480. This will need to be changed to the resolution your monitor will support. But all this is in the X docs, give them a good look. They are complicated, but repeated study will reveal the answers. Don't Forget to use the propper Mhz for the Vertical and Horizontal capabilities of your monitor. Very important if the monitor is older and lacks limit protection, easy to fry the monitor! This is all so complicated at first. Please give the X docs a little study time and you will see the answers. Tough learning, only challenges builds the mind! Don ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Eclipse - bug problem resolution for freebsd?
Hi During the past week I have posted a couple of reports about the bug referred to below on the freebsd-java mailing list ([EMAIL PROTECTED] is also listed as the maintainer for this port) but so far not received any acknowledgement or response so I guess either the person who has previously maintained this was either not around this week or has too much on his/her plate to deal with it right now. In these circumstances I am is a copy of my posting today to [EMAIL PROTECTED] in the hope that some could help me identify a capable committer. --- Posted tday: Subject: can eclipse-devel port be upgraded to 3.02 ? To: freebsd-java.org, [EMAIL PROTECTED] Body: I have now found a fix is available by using the 3.02 upgrade. I cannot seem to reach any individual who would knows how to produce an upgrade or be in a position to commit one. Is anyone here able to advise on that might be achieved. If anyone here wants details of the bug I can provide them. Here is a copy of the email posted There is a bug in the current version 3.7M based on: eclipse-sourceBuild-srcIncluded-3.1M7.zip which provides a serious problem for new users - the help file system does not work. I understand from contributors to the eclipse forum that that bug is fixed in the latest version which is, I believe, 3.02. Apparently a fix for that bug was checked in very recently. Is there any chance that the new version (3.02?) with any late fixes could be made available for the freebsd java ports tree? It would be most appreciated if that could be done as soon as someone has the time available. A big thank you , in advance David -- 40 yrs navigating and computing in blue waters. English Owner Captain of British Registered 60' bluewater Ketch S/V Taurus. Currently in San Diego, CA. Sailing May/June bound for Europe via Panama Canal. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
RE: inbound ssh ceased on 4 servers at same time
sshd is running on the affected machines no errors on console or logs, just times out waiting for the password prompt. interestingly: when investigating this at the console, attempting ssh sessions from the db server and backup server to the file server (these two are 'deeper' in the network so there was never an occasion to ssh FROM them before) produced the std warning about an unknown host prompting for inclusion in the ~/.ssh/known_hosts file. dns is not really involved, the ssh session is sent to the ip address directly as in ssh [EMAIL PROTECTED] ping works in both directions as does all other network services (internal mysql, intranet http, pop3, smtp, smbd, nmdb, dns). network hardware and cabling issues have been effectively ruled out. -- John Brooks [EMAIL PROTECTED] -Original Message- From: Glenn Dawson [mailto:[EMAIL PROTECTED] Sent: Saturday, June 04, 2005 2:56 PM To: [EMAIL PROTECTED] Cc: freebsd-questions@freebsd.org Subject: Re: inbound ssh ceased on 4 servers at same time At 09:05 AM 6/4/2005, you wrote: Yesterday at about noon, all four freebsd servers on a clients lan quit accepting ssh connections. All were running 4.11-release-p4, and had been cvsup'd at the same time from cvs-10, cvs-11, or cvs-12. Outbound ssh (from console of the affected boxes) works as expected, both to local openbsd boxes and to remote locations. There are no host based firewalls involved, and all other network services are operating correctly. Netstat shows port 22 as listening. At 11:20 am (40 minutes earlier), ssh was working properly on all boxes. Has anybody encountered a situation like this before? Not specifically, but the first things I would check: is sshd running on the affected machines? when trying to connect to the affected machines, do the clients give any error messages? or does the connection just time out? are there any relevant entries in the log files on the affected machines? specifically /var/log/messages and /var/log/auth.log are the affected machines using the same name server? and if they are, can the affected machines do forward and reverse lookups for the IP of the system you are trying to connect from? -Glenn -- John Brooks [EMAIL PROTECTED] ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: inbound ssh ceased on 4 servers at same time
John Brooks wrote: sshd is running on the affected machines no errors on console or logs, just times out waiting for the password prompt. interestingly: when investigating this at the console, attempting ssh sessions from the db server and backup server to the file server (these two are 'deeper' in the network so there was never an occasion to ssh FROM them before) produced the std warning about an unknown host prompting for inclusion in the ~/.ssh/known_hosts file. dns is not really involved, the ssh session is sent to the ip address directly as in ssh [EMAIL PROTECTED] ping works in both directions as does all other network services (internal mysql, intranet http, pop3, smtp, smbd, nmdb, dns). network hardware and cabling issues have been effectively ruled out. Have you tried ssh with the -vvv switch to get extra debugging info at the console? If there's anything happening with ssh, it should show up there, I'd expect. Are you testing to/from multiple hosts here? If so, what's different between each set of hosts you're testing? Hope that helps, G ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
JDK 1.5 port fails to compile
I downloaded the required sources for jdk15, but the port fails to compile; here are the final messages. Did I fail to do something important? FreeBSD 5.3, with an up to date ports tree. ../../../src/share/classes/com/sun/jmx/mbeanserver/MBeanInstantiatorImpl.java:162: warning: non-varargs call of varargs method with inexact argument type for last parameter; cast to java.lang.Object for a varargs call cast to java.lang.Object[] for a non-varargs call and to suppress this warning moi= cons.newInstance(null); ^ Note: * uses or overrides a deprecated API. Note: Recompile with -Xlint:deprecation for details. Note: Some input files use unchecked or unsafe operations. Note: Recompile with -Xlint:unchecked for details. 21 errors 12 warnings gmake[3]: *** [.compile.classlist] Error 1 gmake[3]: Leaving directory `/usr/ports/java/jdk15/work/j2se/make/java/java' gmake[2]: *** [all] Error 1 gmake[2]: Leaving directory `/usr/ports/java/jdk15/work/j2se/make/java' gmake[1]: *** [all] Error 1 gmake[1]: Leaving directory `/usr/ports/java/jdk15/work/j2se/make' gmake: *** [j2se-build] Error 2 *** Error code 2 Stop in /usr/ports/java/jdk15. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: JDK 1.5 port fails to compile
On Saturday 04 June 2005 16:27, the author Mike Jeays contributed to the dialogue on- JDK 1.5 port fails to compile: I downloaded the required sources for jdk15, but the port fails to compile; here are the final messages. Did I fail to do something important? FreeBSD 5.3, with an up to date ports tree. ../../../src/share/classes/com/sun/jmx/mbeanserver/MBeanInstantiatorImpl.jav a:162: warning: non-varargs call of varargs method with inexact argument type for last parameter; cast to java.lang.Object for a varargs call cast to java.lang.Object[] for a non-varargs call and to suppress this warning moi= cons.newInstance(null); ^ Note: * uses or overrides a deprecated API. Note: Recompile with -Xlint:deprecation for details. Note: Some input files use unchecked or unsafe operations. Note: Recompile with -Xlint:unchecked for details. 21 errors 12 warnings gmake[3]: *** [.compile.classlist] Error 1 gmake[3]: Leaving directory `/usr/ports/java/jdk15/work/j2se/make/java/java' gmake[2]: *** [all] Error 1 gmake[2]: Leaving directory `/usr/ports/java/jdk15/work/j2se/make/java' gmake[1]: *** [all] Error 1 gmake[1]: Leaving directory `/usr/ports/java/jdk15/work/j2se/make' gmake: *** [j2se-build] Error 2 *** Error code 2 Stop in /usr/ports/java/jdk15. did you add linprocfs /compat/linux/proc linprocfs rw 0 0 and then, as root, execute the commands: kldload linprocfs mount /compat/linux/proc ?? If not you will, need to make clean and recompile David ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] -- 40 yrs navigating and computing in blue waters. English Owner Captain of British Registered 60' bluewater Ketch S/V Taurus. Currently in San Diego, CA. Sailing May/June bound for Europe via Panama Canal. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
RE: inbound ssh ceased on 4 servers at same time
sshd is running on the affected machines no errors on console or logs, just times out waiting for the password prompt. interestingly: when investigating this at the console, attempting ssh sessions from the db server and backup server to the file server (these two are 'deeper' in the network so there was never an occasion to ssh FROM them before) produced the std warning about an unknown host prompting for inclusion in the ~/.ssh/known_hosts file. dns is not really involved, the ssh session is sent to the ip address directly as in ssh [EMAIL PROTECTED] ping works in both directions as does all other network services (internal mysql, intranet http, pop3, smtp, smbd, nmdb, dns). network hardware and cabling issues have been effectively ruled out. Have you tried ssh with the -vvv switch to get extra debugging info at the console? If there's anything happening with ssh, it should show up there, I'd expect. Are you testing to/from multiple hosts here? If so, what's different between each set of hosts you're testing? Hope that helps, G Have not tried the -vvv switch, good call, I have several other networks running the same versions of FreeBSD that are not affected so that will make for a good comparison. Will do that later this evening. I have tested each of the four boxes in the following ways: From OpenBSD firewall to each of the four FreeBSD servers: times out From each FreeBSD server to the OpenBSD firewall: works as expected From each FreeBSD server to off network BSD boxes: works as expected From each FreeBSD server to other FreeBSD server: times out For the last 18 months I have almost daily ssh'd into these 5 boxes for maintenance, programming, logs, mail tracing, backups, etc. I am the only login shell user on them. I had been in the network on these boxes earlier in day, before this started. There were no config changes made. That is part of what is puzzling, and to happen to all four boxes at the same time is cause for conceern. The why of it all is my primary objective at this point. I'll post the results of the -vvv switch a little later this evening. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Unable to build PORT
I am attempting to update this port: apr-nothr-db4-1.0.1_1 with this port: apr-nothr-gdbm-db4-1.0.1_1 In the Makefile there is listed a 'CONFLICKS = apr-*' I have not been able to build this port, since it stops with an error code. Should I delete the old port prior to attempting to build this newer on? I only tried to build it, not install it. I did not see anything in the UPDATING file, although I might have missed it. -- Thanks Gerard E. Seibert [EMAIL PROTECTED] ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Unable to build PORT
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Gerard Seibert wrote: | I am attempting to update this port: | | apr-nothr-db4-1.0.1_1 | | with this port: | | apr-nothr-gdbm-db4-1.0.1_1 | | In the Makefile there is listed a 'CONFLICKS = apr-*' | | I have not been able to build this port, since it stops with an error | code. Should I delete the old port prior to attempting to build this | newer on? I only tried to build it, not install it. I did not see | anything in the UPDATING file, although I might have missed it. | Dear Gerard Seibert first of all, whats the exact error output that you get? secondly, are there any infos about this port in the changelog? (or was the filename changes, install...) in root port dir... Greetings Oliver Leitner Technical Staff http://www.shells.at -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.1 (MingW32) iD8DBQFCoix5WvEVE8MtwbgRAlDIAJ9h26TurtkdE7DY/kSalizfyjU2QwCdGnPI 3et1F/JGGHtS57df1uqLCfo= =ymc7 -END PGP SIGNATURE- ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Unable to build PORT
On Saturday 04 June 2005 17:30, the author Gerard Seibert contributed to the dialogue on- Unable to build PORT: I am attempting to update this port: apr-nothr-db4-1.0.1_1 with this port: apr-nothr-gdbm-db4-1.0.1_1 In the Makefile there is listed a 'CONFLICKS = apr-*' I have not been able to build this port, since it stops with an error code. Should I delete the old port prior to attempting to build this newer on? I only tried to build it, not install it. I did not see anything in the UPDATING file, although I might have missed it. did you try make deinstall of the old port? david -- 40 yrs navigating and computing in blue waters. English Owner Captain of British Registered 60' bluewater Ketch S/V Taurus. Currently in San Diego, CA. Sailing May/June bound for Europe via Panama Canal. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: JDK 1.5 port fails to compile
On Saturday 04 June 2005 06:28 pm, Vizion wrote: On Saturday 04 June 2005 16:27, the author Mike Jeays contributed to the dialogue on- JDK 1.5 port fails to compile: I downloaded the required sources for jdk15, but the port fails to compile; here are the final messages. Did I fail to do something important? FreeBSD 5.3, with an up to date ports tree. ../../../src/share/classes/com/sun/jmx/mbeanserver/MBeanInstantiatorImpl.j av a:162: warning: non-varargs call of varargs method with inexact argument type for last parameter; cast to java.lang.Object for a varargs call cast to java.lang.Object[] for a non-varargs call and to suppress this warning moi= cons.newInstance(null); ^ Note: * uses or overrides a deprecated API. Note: Recompile with -Xlint:deprecation for details. Note: Some input files use unchecked or unsafe operations. Note: Recompile with -Xlint:unchecked for details. 21 errors 12 warnings gmake[3]: *** [.compile.classlist] Error 1 gmake[3]: Leaving directory `/usr/ports/java/jdk15/work/j2se/make/java/java' gmake[2]: *** [all] Error 1 gmake[2]: Leaving directory `/usr/ports/java/jdk15/work/j2se/make/java' gmake[1]: *** [all] Error 1 gmake[1]: Leaving directory `/usr/ports/java/jdk15/work/j2se/make' gmake: *** [j2se-build] Error 2 *** Error code 2 Stop in /usr/ports/java/jdk15. did you add linprocfs /compat/linux/proc linprocfs rw 0 0 and then, as root, execute the commands: kldload linprocfs mount /compat/linux/proc ?? If not you will, need to make clean and recompile David ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] Lets backup to the beginning please. JDK 1.5 has some VERY different build requirements. The instructions for this are in the READ.ME file that is included with the compressed file you downloaded. Follow the instructions and it will work. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: FreeBSD 5.4 Xwindows
On 06/04/05 07:06 PM, Robert Slade sat at the `puter and typed: Hiya, I've been trying to figure this out. I've tried googling for an answer but only got confused. I have a P4 machine with an ATI Radeon 9200 with 128Mbyte of memory built into the motherboard. I have not been able to get Xwindows to run at any greater resolution than basic VGA. All I seam to get is no driver or no screen defined. Goggle troughs up some info but for linux. Can anybody help please. You might find some useful info in /usr/X11R6/lib/X11/doc/README.ati One notable paragraph from this doc: The newer Rage 128 and Radeon chips are not yet supported by this driver. Rage 128's and Radeon's are, however, supported by separate drivers, and owners of such adapters should consult the documentation provided with these drivers. This driver will also invoke the appropriate driver if it finds Rage 128 and/or Radeon adapter(s) in the system. Good luck Lou -- Louis LeBlanc FreeBSD-at-keyslapper-DOT-net Fully Funded Hobbyist, KeySlapper Extrordinaire :) Please send off-list email to: leblanc at keyslapper d.t net Key fingerprint = C5E7 4762 F071 CE3B ED51 4FB8 AF85 A2FE 80C8 D9A2 mophobia, n.: Fear of being verbally abused by a Mississippian. pgpDX2w32N91y.pgp Description: PGP signature
Re: FreeBSD 5.4 Xwindows
On 06/04/05 10:01 PM, Louis LeBlanc sat at the `puter and typed: On 06/04/05 07:06 PM, Robert Slade sat at the `puter and typed: Hiya, I've been trying to figure this out. I've tried googling for an answer but only got confused. I have a P4 machine with an ATI Radeon 9200 with 128Mbyte of memory built into the motherboard. I have not been able to get Xwindows to run at any greater resolution than basic VGA. All I seam to get is no driver or no screen defined. Goggle troughs up some info but for linux. Can anybody help please. You might find some useful info in /usr/X11R6/lib/X11/doc/README.ati One notable paragraph from this doc: The newer Rage 128 and Radeon chips are not yet supported by this driver. Rage 128's and Radeon's are, however, supported by separate drivers, and owners of such adapters should consult the documentation provided with these drivers. This driver will also invoke the appropriate driver if it finds Rage 128 and/or Radeon adapter(s) in the system. Good luck BTW, as mentioned by another poster, you probably need the RADEON driver. Check the manpage (RADEON(4x)) - it does mention several 9200 models. Lou -- Louis LeBlanc FreeBSD-at-keyslapper-DOT-net Fully Funded Hobbyist, KeySlapper Extrordinaire :) Please send off-list email to: leblanc at keyslapper d.t net Key fingerprint = C5E7 4762 F071 CE3B ED51 4FB8 AF85 A2FE 80C8 D9A2 optimist: A man who refuses to see the wolf until he seizes the seat of his pants. pgpy8duzTvCav.pgp Description: PGP signature
Re: sendmail problems
On Fri, 3 Jun 2005, John Larson wrote: I am trying to configure sendmail. I have a lan in my room with a personal freebsd 4.11 apache2 web server with one client machine connected directly to it. when I use a form to send mail to the server it is marked as undeliverable to the username and ends up someplace I can't find. when I log in it says I have mail but when I try to access it using mail it says no mail. John Larson [EMAIL PROTECTED] Since sendmail is very complex: Did you have a look at http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/mail.html ??? Regards, Uli. * * Peter Ulrich Kruppa - Wuppertal - Germany * * ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Gnumeric warnings
Hello all, I wanted to start out by saying thank you to everyone who has given me help and has contributed to making this a good OS and community. Down to business... I just installed Gnumeric from Ports and when I invoke it, it appears to work fine, but I do see warnings printed (see below). Is this normal? Is it a bug; I searched around and the closest thing I found is http://mail.gnome.org/archives/gnumeric-list/2004-September/msg00032.html However, the author of that post gave directions to fix it for Debian. Will this fix work for FBSD 5.4-STABLE? Is there anything else I should know about it? Why is there a problem in the first place? Any insight and information on the matter would be greatly appreciated. Thank you for your help and time. uname -a FreeBSD ast.home.iq 5.4-STABLE FreeBSD 5.4-STABLE #0: Sun May 29 10:30:27 EDT 2005 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/IQKERNEL i386 gnumeric [1] 48517 ** (gnumeric:48517): WARNING **: Unable to load key '/apps/gnumeric/core/defaultfont/size' ** (gnumeric:48517): WARNING **: Using default value '10' ** (gnumeric:48517): WARNING **: Unable to load key '/apps/gnumeric/core/defaultfont/bold' ** (gnumeric:48517): WARNING **: Using default value 'false' ** (gnumeric:48517): WARNING **: Unable to load key '/apps/gnumeric/core/defaultfont/italic' ** (gnumeric:48517): WARNING **: Using default value 'false' ** (gnumeric:48517): WARNING **: Unable to load key '/apps/gnumeric/core/file/hi story/n' ** (gnumeric:48517): WARNING **: Using default value '4' ** (gnumeric:48517): WARNING **: Unable to load key '/apps/gnumeric/plugins/activate-new' ** (gnumeric:48517): WARNING **: Using default value 'true' ** (gnumeric:48517): WARNING **: Unable to load key '/apps/gnumeric/core/gui/screen/horizontaldpi' ** (gnumeric:48517): WARNING **: Using default value '96' ** (gnumeric:48517): WARNING **: Unable to load key '/apps/gnumeric/core/gui/screen/verticaldpi' ** (gnumeric:48517): WARNING **: Using default value '96' ** (gnumeric:48517): WARNING **: Unable to load key '/apps/gnumeric/core/workbook/n-sheet' ** (gnumeric:48517): WARNING **: Using default value '3' ** (gnumeric:48517): WARNING **: Unable to load key '/apps/gnumeric/core/gui/window/x' ** (gnumeric:48517): WARNING **: Using default value '0.6' ** (gnumeric:48517): WARNING **: Unable to load key '/apps/gnumeric/core/gui/window/y' ** (gnumeric:48517): WARNING **: Using default value '0.6' ** (gnumeric:48517): WARNING **: Unable to load key '/apps/gnumeric/core/gui/window/zoom' ** (gnumeric:48517): WARNING **: Using default value '1' ** (gnumeric:48517): WARNING **: Unable to load key '/apps/gnumeric/printsetup/center-horizontally' ** (gnumeric:48517): WARNING **: Using default value 'false' ** (gnumeric:48517): WARNING **: Unable to load key '/apps/gnumeric/printsetup/center-vertically' ** (gnumeric:48517): WARNING **: Using default value 'false' ** (gnumeric:48517): WARNING **: Unable to load key '/apps/gnumeric/printsetup/print-grid-lines' ** (gnumeric:48517): WARNING **: Using default value 'false' ** (gnumeric:48517): WARNING **: Unable to load key '/apps/gnumeric/printsetup/print-even-if-only-styles' ** (gnumeric:48517): WARNING **: Using default value 'false' ** (gnumeric:48517): WARNING **: Unable to load key '/apps/gnumeric/printsetup/print-black-n-white' ** (gnumeric:48517): WARNING **: Using default value 'false' ** (gnumeric:48517): WARNING **: Unable to load key '/apps/gnumeric/printsetup/print-titles' ** (gnumeric:48517): WARNING **: Using default value 'false' ** (gnumeric:48517): WARNING **: Unable to load key '/apps/gnumeric/printsetup/r ight-then-down' ** (gnumeric:48517): WARNING **: Using default value 'false' ** (gnumeric:48517): WARNING **: Unable to load key '/apps/gnumeric/printsetup/scale-percentage' ** (gnumeric:48517): WARNING **: Using default value 'true' ** (gnumeric:48517): WARNING **: Unable to load key '/apps/gnumeric/printsetup/scale-percentage-value' ** (gnumeric:48517): WARNING **: Using default value '100' ** (gnumeric:48517): WARNING **: Unable to load key '/apps/gnumeric/printsetup/scale-width' ** (gnumeric:48517): WARNING **: Using default value '1' ** (gnumeric:48517): WARNING **: Unable to load key '/apps/gnumeric/printsetup/scale-height' ** (gnumeric:48517): WARNING **: Using default value '1' ** (gnumeric:48517): WARNING **: Unable to load key '/apps/gnumeric/printsetup/margin-top' ** (gnumeric:48517): WARNING **: Using default value '120' ** (gnumeric:48517): WARNING **: Unable to load key '/apps/gnumeric/printsetup/margin-bottom' ** (gnumeric:48517): WARNING **: Using default value '120' ** (gnumeric:48517): WARNING **: Unable to load key '/apps/gnumeric/printsetup/all-sheets' ** (gnumeric:48517): WARNING **: Using default value 'true' ** (gnumeric:48517): WARNING **: Unable to load key '/apps/gnumeric/core/gui/editing/autocomplete' **
Weird ping times
Hi I have a router setup with fBSD uname output FreeBSD aaa.xxx.com 5.4-RELEASE FreeBSD 5.4-RELEASE #0: Wed May 25 15:08:04 PDT 2005 root@:/usr/src/sys/i386/compile/EFKERNEL i386 When i ping this machine from different networks i get the following timings Reply from xxx.aaa.bbb.ccc: bytes=32 time=187ms TTL=49 Reply from xxx.aaa.bbb.ccc: bytes=32 time=1688ms TTL=49 Reply from xxx.aaa.bbb.ccc: bytes=32 time=251ms TTL=49 Reply from xxx.aaa.bbb.ccc bytes=32 time=1696ms TTL=49 Reply from xxx.aaa.bbb.ccc: bytes=32 time=181ms TTL=49 Reply from xxx.aaa.bbb.ccc: bytes=32 time=1626ms TTL=49 Reply from xxx.aaa.bbb.ccc: bytes=32 time=93ms TTL=49 Reply from xxx.aaa.bbb.ccc: bytes=32 time=1474ms TTL=49 Reply from xxx.aaa.bbb.ccc: bytes=32 time=82ms TTL=49 Reply from xxx.aaa.bbb.ccc: bytes=32 time=1504ms TTL=49 Reply from xxx.aaa.bbb.ccc: bytes=32 time=92ms TTL=49 Reply from xxx.aaa.bbb.ccc: bytes=32 time=1544ms TTL=49 Reply from xxx.aaa.bbb.ccc: bytes=32 time=97ms TTL=49 Reply from xxx.aaa.bbb.ccc: bytes=32 time=1033ms TTL=49 Reply from xxx.aaa.bbb.ccc: bytes=32 time=79ms TTL=49 Reply from xxx.aaa.bbb.ccc: bytes=32 time=1593ms TTL=49 Reply from xxx.aaa.bbb.ccc: bytes=32 time=188ms TTL=49 Reply from xxx.aaa.bbb.ccc: bytes=32 time=1766ms TTL=49 Reply from xxx.aaa.bbb.ccc: bytes=32 time=207ms TTL=49 Reply from xxx.aaa.bbb.ccc: bytes=32 time=1464ms TTL=49 Reply from xxx.aaa.bbb.ccc: bytes=32 time=91ms TTL=49 Reply from xxx.aaa.bbb.ccc: bytes=32 time=1678ms TTL=49 Reply from xxx.aaa.bbb.ccc: bytes=32 time=137ms TTL=49 Alternate good and bad times!!! I rebooted the machine to no effect. The problem seems to go away on its own for a few hours then comes back. I ran tcpdump saw nothing different between the times this behaviour was seen the times it wasnt. The machine is running IPFW, isc-dhcp server and nat. Any thoughts?? ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Weird ping times
Karan Gupta wrote: Hi I have a router setup with fBSD uname output FreeBSD aaa.xxx.com 5.4-RELEASE FreeBSD 5.4-RELEASE #0: Wed May 25 15:08:04 PDT 2005 root@:/usr/src/sys/i386/compile/EFKERNEL i386 When i ping this machine from different networks i get the following timings [snip] Alternate good and bad times!!! I rebooted the machine to no effect. The problem seems to go away on its own for a few hours then comes back. I ran tcpdump saw nothing different between the times this behaviour was seen the times it wasnt. The machine is running IPFW, isc-dhcp server and nat. Any thoughts?? does traceroute yield anything interesting? (from either end?) - ping times over a second sounds like a routing problem maybe outside the machine. I've also seen weird results with machines hat have USB serial ports on them where the machine dies for up to 16 seconds then comes back and all the ping packets come back at once with delays from a few ms to 16 seconds in one second steps. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: FreeBSD 5.4 Xwindows
On Sat, 2005-06-04 at 21:26, [EMAIL PROTECTED] wrote: First things first. What module did you load for the card. My guess (because I did this myself) was to use ATI, but you need RADEON. And, in the sysinstall setup for video, you most likely selected vga, sometimes vesa works better! With Vesa I get an error driver not found. The only other option is to use ATI which does load, but I get a waring re the PCI bus ID and then a fatal error. Looking at it with Windows it seems to use 2 bus ID's 1:0:0 and 1:0:1. Now the fun part. If you look in Xorg.conf, you will see the screen resolution selections.(Sorry, I will let you find that setup file for yourself=better to remember for future changes!) Yours will indicate 640x480. This will need to be changed to the resolution your monitor will support. But all this is in the X docs, give them a good look. They are complicated, but repeated study will reveal the answers. Don't Forget to use the propper Mhz for the Vertical and Horizontal capabilities of your monitor. Very important if the monitor is older and lacks limit protection, easy to fry the monitor! This is all so complicated at first. Please give the X docs a little study time and you will see the answers. Tough learning, only challenges builds the mind! Don Thanks Don, I'll go and tinker some more tomorrow. Rob ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]