X11 - keyboard driver unloaded, how to load it again
Hi, I've an USB Mouse - Microsoft Wireless Mouse 1000, which is recognized also as a keyboard: ugen1.3: vendor 0x192f at usbus1 (disconnected) ums0: at uhub2, port 2, addr 3 (disconnected) ugen0.5: Microsoft at usbus0 ukbd0: Microsoft Microsoft 2.4GHz Transceiver v8.0, class 0/0, rev 2.00/6.56, addr 5 on usbus0 kbd2 at ukbd0 ums0: Microsoft Microsoft 2.4GHz Transceiver v8.0, class 0/0, rev 2.00/6.56, addr 5 on usbus0 ums0: 5 buttons and [XYZT] coordinates ID=26 ums0: 0 buttons and [T] coordinates ID=0 uhid0: Microsoft Microsoft 2.4GHz Transceiver v8.0, class 0/0, rev 2.00/6.56, addr 5 on usbus0 After disconnecting this mouse kbd module was unloaded by X: [ 40002.703] (**) Microsoft 2.4GHz Transceiver v8.0: always reports core events [ 40002.703] (**) Microsoft 2.4GHz Transceiver v8.0: always reports core events [ 40002.704] (**) Option Protocol standard [ 40002.704] (**) Option XkbRules base [ 40002.704] (**) Option XkbModel pc105 [ 40002.704] (**) Option XkbLayout pl [ 40002.704] (**) Option XkbOptions terminate:ctrl_alt_bksp [ 40002.709] (**) Option config_info hal:/org/freedesktop/Hal/devices/usb_device_45e_745_noserial_if0 [ 40002.709] (II) XINPUT: Adding extended input device Microsoft 2.4GHz Transceiver v8.0 (type: KEYBOARD) [ 47161.229] (II) 3rd Button detected: disabling emulate3Button [ 49888.691] (II) config/hal: removing device Microsoft 2.4GHz Transceiver v8.0 [ 49888.696] (II) UnloadModule: kbd [ 49888.696] (II) Unloading kbd Question is: how to prevent this behavior in X and how to reload module 'kbd' under working X session (I can connect through ssh to this machine). best regards, -- Sebastian Chmielewski ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Switching default gateways
I have a host with two uplinks. One is the default gateway. I want the system to automatically switch to the other one if it detects problems with the first one. How do I do this? ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: FreeBSD 10.0-CURRENT/AMD64 (CLANG): lang/gcc46 fails to build
On 2011-12-07 05:56, O. Hartmann wrote:
On FreeBSD 10.0-CURRENT/amd64 I run into the error shown below when
updating the installation of the gcc46 compiler suite.
If you report port compilation errors, always use DISABLE_MAKE_JOBS,
otherwise the actual error message will drown in multithreaded spam. :)
(And even if you would save and post the full build log, it is sometimes
still impossible to see which exact command failed and why.)
That said, you are most likely running into an issue with the fix for
FreeBSD 10-CURRENT in bsd.port.mk, causing the lto-plugin stage
configure script to fail.
This is because the gcc ports unpack their source code into
${WRKDIR}/gcc-${VERSIONSTRING}, and then override WRKSRC to
${WRKDIR}/build. Since bsd.port.mk only applies the run-autotools-fixup
to ${WRKSRC}, the gcc source itself is not properly fixed up.
You can try the attached patch, which fixes this (and fixes it for all
other ports that override WKRSRC).
Index: Mk/bsd.port.mk
===
RCS file: /home/mirror/ncvs/ports/Mk/bsd.port.mk,v
retrieving revision 1.699
diff -u -r1.699 bsd.port.mk
--- Mk/bsd.port.mk 9 Nov 2011 08:53:12 - 1.699
+++ Mk/bsd.port.mk 7 Dec 2011 08:16:56 -
@@ -3663,7 +3663,7 @@
run-autotools-fixup:
# Work around an issue where FreeBSD 10.0 is detected as FreeBSD 1.x.
.if ${OSVERSION} = 100 !defined(WITHOUT_FBSD10_FIX)
- -@for f in `${FIND} ${WRKSRC} -type f \( -name config.libpath -o \
+ -@for f in `${FIND} ${WRKDIR} -type f \( -name config.libpath -o \
-name config.rpath -o -name configure -o -name libtool.m4 -o \
-name ltconfig -o -name libtool -o -name aclocal.m4 -o \
-name acinclude.m4 \)` ; do \
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: Playing .ASX files via/within Firefox ?
In message 4edf4d7a.ac3xg02r+czwn8xy%per...@pluto.rain.com, you wrote: Ronald F. Guilmette r...@tristatelogic.com wrote: I've been trying to look at California Dept. of Transportation webcams using Firefox on FreeBSD and so far it simply ain't workin'. ... http://www.dot.ca.gov/dist3/departments/traffic/cameras/ Works for me on 8.1-RELEASE with FF 3.5.10 and these packages: Well, thanks, I guess. At least this gives me confidence that it can be done. I am still somewhat at a loss to know exactly _how_ it can be done however. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: Nuxeo install in FreeBSD
On Tue, 06 Dec 2011 20:50:06 +0100, Peter Ulrich Kruppa wrote: I unzipped the thing in /usr/local and tried to execute the ./bin/nuxeoctl start I do the same thing command, which failed. Having a look at the first line of this file I found #!/bin/bash Idem But my bash is installed in # which bash /usr/local/bin/bash So I changed the first line of nuxeoctl into #!/usr/local/bin/bash Idem and now I can start and run Nuxeo. Not work for me but i must try it on a 32 bits FreeBSD and give you some feed back. I hope that helps Yes it's help me Peter. Thank's Bruno -- Sallanches Data Network (SDN) Pour l'Internet des internautes ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: umass to /dev/da* mapping
On Mon, 5 Dec 2011 17:08:15 + Mike Clarke jmc-freeb...@milibyte.co.uk wrote: I have a fairly simple perl script which is run by devd when I plug in a USB memory stick. The script sets up some permissions and a link to make life easy for a user to mount the memory stick. This normally works fine but there are problems if the memory stick is already inserted before booting. Normally my internal 4 slot memory card reader is detected as umass0 with devices da[0-3] and when the USB memory stick is inserted it comes up as umass1 with device da4 and my script works on that assumption. If the USB stick is present on booting then it appears as da0 on umass0 and the card reader is da[1-4] on umass1 so the script fails. Is there any convenient way for my script to determine which da* devices correspond to the umass device name? Why are you using a custom Perl script for this instead of the built in tools for this? Below is how I have it setup on my system... In /etc/devfs.rules... [localrules=10] add path 'da*s*' mode 0660 group 5001 In /etc/rc.conf... devfs_system_ruleset=localrules In /etc/sysctl.conf... vfs.usermount=1 And what group 5001 is... [kitsune@vixen42]/etc getent group 5001 devDAaccess:*:5001:kitsune [kitsune@vixen42]/etc Allows the group devDAaccess to access /dev/da*s* and mount it. For more reading on this, I suggest the following man files... devfs.rules(5) rc.conf(5) devfs(8) ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: X11 - keyboard driver unloaded, how to load it again
On Wed, 7 Dec 2011 08:48:20 +0100 Sebastian Chmielewski chmi...@o2.pl wrote: Hi, I've an USB Mouse - Microsoft Wireless Mouse 1000, which is recognized also as a keyboard: ugen1.3: vendor 0x192f at usbus1 (disconnected) ums0: at uhub2, port 2, addr 3 (disconnected) ugen0.5: Microsoft at usbus0 ukbd0: Microsoft Microsoft 2.4GHz Transceiver v8.0, class 0/0, rev 2.00/6.56, addr 5 on usbus0 kbd2 at ukbd0 ums0: Microsoft Microsoft 2.4GHz Transceiver v8.0, class 0/0, rev 2.00/6.56, addr 5 on usbus0 ums0: 5 buttons and [XYZT] coordinates ID=26 ums0: 0 buttons and [T] coordinates ID=0 uhid0: Microsoft Microsoft 2.4GHz Transceiver v8.0, class 0/0, rev 2.00/6.56, addr 5 on usbus0 After disconnecting this mouse kbd module was unloaded by X: [ 40002.703] (**) Microsoft 2.4GHz Transceiver v8.0: always reports core events [ 40002.703] (**) Microsoft 2.4GHz Transceiver v8.0: always reports core events [ 40002.704] (**) Option Protocol standard [ 40002.704] (**) Option XkbRules base [ 40002.704] (**) Option XkbModel pc105 [ 40002.704] (**) Option XkbLayout pl [ 40002.704] (**) Option XkbOptions terminate:ctrl_alt_bksp [ 40002.709] (**) Option config_info hal:/org/freedesktop/Hal/devices/usb_device_45e_745_noserial_if0 [ 40002.709] (II) XINPUT: Adding extended input device Microsoft 2.4GHz Transceiver v8.0 (type: KEYBOARD) [ 47161.229] (II) 3rd Button detected: disabling emulate3Button [ 49888.691] (II) config/hal: removing device Microsoft 2.4GHz Transceiver v8.0 [ 49888.696] (II) UnloadModule: kbd [ 49888.696] (II) Unloading kbd Question is: how to prevent this behavior in X and how to reload module 'kbd' under working X session (I can connect through ssh to this machine). I would suggest just disabling HAL support for x11-server/xorg-server and just statically configuring the file. The only thing you may possibly want to do after that is make sure moused is started if you are have any non-USB mice on that system as well. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: Playing .ASX files via/within Firefox ?
On Wed, 7 Dec 2011, per...@pluto.rain.com wrote: Ronald F. Guilmette r...@tristatelogic.com wrote: I've been trying to look at California Dept. of Transportation webcams using Firefox on FreeBSD and so far it simply ain't workin'. ... http://www.dot.ca.gov/dist3/departments/traffic/cameras/ Works for me on 8.1-RELEASE with FF 3.5.10 and these packages: [ ... ] All I had to do was click on a camera (I picked Williams SB, for no particular reason) and I got what looked like an image, including an I-5 at Williams SB overlay. Granted there wasn't a whole lot to see, since it was after dark, but the image did show several vehicles' headlights -- it was not just a black rectangle. Right, but that's a still image, a screenshot. Above that is a link labeled go to live camera - when you click on that, do you see live motion video? What I see is mplayer-plugin starting, then buffering, then a blue rectangle. The live camera link is what goes to the .asx, which is what the OP was asking about. -- Chris Hill ch...@monochrome.org ** [ Busy Expunging / ] ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: Switching default gateways
On 12/7/11 9:20 AM, Ross wrote: I have a host with two uplinks. One is the default gateway. I want the system to automatically switch to the other one if it detects problems with the first one. How do I do this? Hello to you too, First of all, please realize this isn't a google search field, you're talking to actual humans and you might want to start off with a proper greeting. With regards to your question, this can be done in 2 different ways: 1/ script Ping your primary gateway, if it stops responding your script changes the gateway to your backup. When the primary comes back up, swap again. Easily done. 2/ routing protocols Get your 2 upstream routers to announce themselves via a routing protocol, only works if you have control of said gateways. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Question about hardware support
Hello, Are there any FreeBSD drivers for Acer Aspire 3610? Thank you and best regards, Ammar ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Requirement of Embedded OS and Embedded Database
Dear Sir, Prompt Softech, part of Prompt Group of companies, a customized electronics product development, software development and service provider focused in the area of enterprise resource information, business intelligence, software solutions. We have requirement of Embedded OS and Embedded Database. Microcontroller - PIC32MX664 from Microchip Supporting Peripheral Required: SD Card USB Pen Drive UART - 5 ports Parallel Printer 4 x 20 LCD RTC PS2 Keyboard 4 x 4 Matrix Keyboard. FAT32 file system Application: Data acquisition system which collect different types of data from various machines using RS232. All these data store on SD Card. Data cab backup into USB pen drive. We have to generate various type of report according to parameters like date, unique code for different customers. I want to know that Can be FreeBSD implemented on PIC32 microcontroller? How much FLASH and RAM required? Which database is suitable for FreeBSD? For more information about us, please visit our website: www.promptsoftech.com Best Regards, Bhautik Kothadia Sr. Embedded Engineer Prompt Softech 12 SF Maurya Complex, Opp. R.K. Royal Hall, Science City Road, Sola, Ahmedabad - 380 061 India Phone: +91 79 40081941 / 1942 Fax: +91 79 40081940 Email: b...@promptsoftech.com ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: umass to /dev/da* mapping
On Wednesday 07 December 2011, Zane C. B-H. wrote: Why are you using a custom Perl script for this instead of the built in tools for this? Below is how I have it setup on my system... In /etc/devfs.rules... [localrules=10] add path 'da*s*' mode 0660 group 5001 Because devfs only relates to boot time and I want to deal with usb sticks inserted while the system is running. The allocation of device numbers is dynamic and depends on what other umass devices are already connected. Normally my internal memory card reader is allocated da[0-3] at boot time and the memory stick will appear as da4 when subsequently inserted but if it's already plugged in when the system boots then it appears as da0 and the card reader is da[1-4]. If I insert an extra memory stick it will be allocated the next available device number. I don't want the user to have to hunt around to determine which device to mount so my script takes the umass device number supplied by devd and determines the relevant da* device then it sets the permission to 660 for that device and creates a link, /dev/usbstick, pointing to it. All the user then has to do is mount /dev/usbstick on his mount point. Following the earlier tip from Polytropon I now have a working script which does exactly what I need. -- Mike Clarke ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: Question about hardware support
On 07/12/2011 05:34, Ammar Shaarbaf wrote: Are there any FreeBSD drivers for Acer Aspire 3610? This is the closest hardware match I could find: http://laptop.bsdgroup.de/freebsd/index.html?action=show_laptop_detaillaptop=12882 Drivers in FreeBSD are generally described in terms of the specific components (motherboard chipset, NIC, SATA controller, etc. etc.) rather than in terms of a specific whole machine produced by a manufacturer. Laptops are particularly tricky in this regard, and if no-one else has reported on your particular model, generally the best procedure is to try booting the device using a USB or CD-Rom image, and see what does and doesn't work. Cheers, Matthew -- Dr Matthew J Seaman MA, D.Phil. 7 Priory Courtyard Flat 3 PGP: http://www.infracaninophile.co.uk/pgpkey Ramsgate JID: matt...@infracaninophile.co.uk Kent, CT11 9PW signature.asc Description: OpenPGP digital signature
Re: Question about hardware support
El día Wednesday, December 07, 2011 a las 12:54:35PM +, Matthew Seaman escribió: Drivers in FreeBSD are generally described in terms of the specific components (motherboard chipset, NIC, SATA controller, etc. etc.) rather than in terms of a specific whole machine produced by a manufacturer. Laptops are particularly tricky in this regard, and if no-one else has reported on your particular model, generally the best procedure is to try booting the device using a USB or CD-Rom image, and see what does and doesn't work. One good method is to let it boot a recent Knoppix DVD and see what chips it 'sees'; it will not touch the installed OS; matthias -- Matthias Apitz t +49-89-61308 351 - f +49-89-61308 399 - m +49-170-4527211 e g...@unixarea.de - w http://www.unixarea.de/ UNIX since V7 on PDP-11 | UNIX on mainframe since ESER 1055 (IBM /370) UNIX on x86 since SVR4.2 UnixWare 2.1.2 | FreeBSD since 2.2.5 ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: umass to /dev/da* mapping
On Wed, 7 Dec 2011 12:51:47 + Mike Clarke jmc-freeb...@milibyte.co.uk wrote: On Wednesday 07 December 2011, Zane C. B-H. wrote: Why are you using a custom Perl script for this instead of the built in tools for this? Below is how I have it setup on my system... In /etc/devfs.rules... [localrules=10] add path 'da*s*' mode 0660 group 5001 Because devfs only relates to boot time and I want to deal with usb sticks inserted while the system is running. The allocation of device numbers is dynamic and depends on what other umass devices are already connected. Normally my internal memory card reader is allocated da[0-3] at boot time and the memory stick will appear as da4 when subsequently inserted but if it's already plugged in when the system boots then it appears as da0 and the card reader is da[1-4]. If I insert an extra memory stick it will be allocated the next available device number. I don't want the user to have to hunt around to determine which device to mount so my script takes the umass device number supplied by devd and determines the relevant da* device then it sets the permission to 660 for that device and creates a link, /dev/usbstick, pointing to it. All the user then has to do is mount /dev/usbstick on his mount point. Following the earlier tip from Polytropon I now have a working script which does exactly what I need. Still you will want to investigate what I've mentioned. It will drastically simplify permission stuff as well as make automatic. The devfs stuff is just not boottime only, but will be applied to any new device added etc post boot. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: Question about hardware support
On Wed, 7 Dec 2011, Matthias Apitz wrote: El día Wednesday, December 07, 2011 a las 12:54:35PM +, Matthew Seaman escribió: Drivers in FreeBSD are generally described in terms of the specific components (motherboard chipset, NIC, SATA controller, etc. etc.) rather than in terms of a specific whole machine produced by a manufacturer. Laptops are particularly tricky in this regard, and if no-one else has reported on your particular model, generally the best procedure is to try booting the device using a USB or CD-Rom image, and see what does and doesn't work. One good method is to let it boot a recent Knoppix DVD and see what chips it 'sees'; it will not touch the installed OS; Along those lines, PC-BSD (pcbsd.org) has a live DVD or live USB mode.___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: umass to /dev/da* mapping
On Wed, 7 Dec 2011, Zane C. B-H. wrote: Still you will want to investigate what I've mentioned. It will drastically simplify permission stuff as well as make automatic. The devfs stuff is just not boottime only, but will be applied to any new device added etc post boot. Are you sure of that? Seems like devfs permissions are only applied when devfs(8) apply/applyset commands are run, directly or through /etc/rc.d/devfs. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: umass to /dev/da* mapping
On Wed, 7 Dec 2011 08:39:30 -0700 (MST) Warren Block wbl...@wonkity.com wrote: On Wed, 7 Dec 2011, Zane C. B-H. wrote: Still you will want to investigate what I've mentioned. It will drastically simplify permission stuff as well as make automatic. The devfs stuff is just not boottime only, but will be applied to any new device added etc post boot. Are you sure of that? Seems like devfs permissions are only applied when devfs(8) apply/applyset commands are run, directly or through /etc/rc.d/devfs. Yeah, I am sure of that. It is what I have setup here. /etc/devfs.conf - This one only affects boot time stuff. /dec/devfs.rules - This one contains the rules will be applied during and post boot. It will also require you to specify which to use in /etc/rc.conf as this file can contain multiple rule sets. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: umass to /dev/da* mapping
On Wednesday 07 December 2011, Zane C. B-H. wrote: On Wed, 7 Dec 2011 08:39:30 -0700 (MST) Warren Block wbl...@wonkity.com wrote: On Wed, 7 Dec 2011, Zane C. B-H. wrote: Still you will want to investigate what I've mentioned. It will drastically simplify permission stuff as well as make automatic. The devfs stuff is just not boottime only, but will be applied to any new device added etc post boot. Are you sure of that? Seems like devfs permissions are only applied when devfs(8) apply/applyset commands are run, directly or through /etc/rc.d/devfs. Yeah, I am sure of that. It is what I have setup here. /etc/devfs.conf - This one only affects boot time stuff. /dec/devfs.rules - This one contains the rules will be applied during and post boot. It will also require you to specify which to use in /etc/rc.conf as this file can contain multiple rule sets. But can I use that to dynamically set up my link to the new device when the memory stick is inserted? -- Mike Clarke ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: umass to /dev/da* mapping
On Wed, 7 Dec 2011 16:07:09 +
Mike Clarke jmc-freeb...@milibyte.co.uk wrote:
On Wednesday 07 December 2011, Zane C. B-H. wrote:
On Wed, 7 Dec 2011 08:39:30 -0700 (MST)
Warren Block wbl...@wonkity.com wrote:
On Wed, 7 Dec 2011, Zane C. B-H. wrote:
Still you will want to investigate what I've mentioned. It will
drastically simplify permission stuff as well as make automatic.
The devfs stuff is just not boottime only, but will be applied
to any new device added etc post boot.
Are you sure of that? Seems like devfs permissions are only
applied when devfs(8) apply/applyset commands are run, directly or
through /etc/rc.d/devfs.
Yeah, I am sure of that. It is what I have setup here.
/etc/devfs.conf - This one only affects boot time stuff.
/dec/devfs.rules - This one contains the rules will be applied
during and post boot. It will also require you to specify which to
use in /etc/rc.conf as this file can contain multiple rule sets.
But can I use that to dynamically set up my link to the new device
when the memory stick is inserted?
Use devd.conf to do that. This is what I do.
#Mount and usb device that is plugged in and creates a da device
notify 20{
match system DEVFS;
match typeCREATE;
match cdevda[0-9]*;
action /usr/local/etc/rc.d/usb_device_action mount
'/dev/$cdev'; };
notify 20{
match system DEVFS;
match typeDESTROY;
match cdevda[0-9]*;
action /usr/local/etc/rc.d/usb_device_action umount
'/dev/$cdev'; };
The action line is what you want it to do, in my case I have this
script I wrote that reads the device label, if it finds the label the
it will create a mount point with that label name, If it can't find a
label it creates a mount point using the device name.
--
Rod Person http://www.rodperson.com rodper...@rodperson.com
Silence is a fence around wisdom
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
BIND and LDAP support
Apologies if this is not the appropriate list but I can't seem to find one pertaining to the installation and configuration of BIND. I posted the following message on the FreeBSD forums a few weeks back but have had no replies, so I thought I'd try here on the lists: System: FreeBSD 8.2-RELEASE 64-bit Hello, I'm going to attempt to install the latest BIND port (dns/bind98) and have a couple of questions about the available install options: WITH_REPLACE_BASE=true Does this delete the base BIND version and if so would I need to edit src.conf to tell the compiler not to reinstall base BIND when I do a buildworld cycle? WITH_DLZ_LDAP=true Does this actually enable LDAP backend support or is it something else? The reason I ask is because there seems to be a separate port for BIND LDAP support but it's for an older version of BIND (dns/bind97-sdb) Thanks for any assistance. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: umass to /dev/da* mapping
On Wed, 7 Dec 2011, Mike Clarke wrote: On Wednesday 07 December 2011, Zane C. B-H. wrote: On Wed, 7 Dec 2011 08:39:30 -0700 (MST) Warren Block wbl...@wonkity.com wrote: On Wed, 7 Dec 2011, Zane C. B-H. wrote: Still you will want to investigate what I've mentioned. It will drastically simplify permission stuff as well as make automatic. The devfs stuff is just not boottime only, but will be applied to any new device added etc post boot. Are you sure of that? Seems like devfs permissions are only applied when devfs(8) apply/applyset commands are run, directly or through /etc/rc.d/devfs. Yeah, I am sure of that. It is what I have setup here. /etc/devfs.conf - This one only affects boot time stuff. /dec/devfs.rules - This one contains the rules will be applied during and post boot. It will also require you to specify which to use in /etc/rc.conf as this file can contain multiple rule sets. Tested, and I agree. It'll set permissions on dynamically added devices. Sorry about that. But can I use that to dynamically set up my link to the new device when the memory stick is inserted? No, devfs.rules can't run arbitrary code when a device is added. devd.conf is the place for that. Actually, create a new .conf file in /etc/devd/ for your own customizations. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: BIND and LDAP support
On 12/7/11 8:15 PM, Kernel Panic wrote: Apologies if this is not the appropriate list but I can't seem to find one pertaining to the installation and configuration of BIND. I posted the following message on the FreeBSD forums a few weeks back but have had no replies, so I thought I'd try here on the lists: System: FreeBSD 8.2-RELEASE 64-bit Hello, I'm going to attempt to install the latest BIND port (dns/bind98) and have a couple of questions about the available install options: WITH_REPLACE_BASE=true Does this delete the base BIND version and if so would I need to edit src.conf to tell the compiler not to reinstall base BIND when I do a buildworld cycle? WITH_DLZ_LDAP=true Does this actually enable LDAP backend support or is it something else? The reason I ask is because there seems to be a separate port for BIND LDAP support but it's for an older version of BIND (dns/bind97-sdb) Thanks for any assistance. Hi, Regarding WITH_REPLACE_BASE, yes, this will make make install install the files in place of the base system's ones, as opposed to in /usr/local/ . If you do this, you will indeed want to add the following to your /etc/make.conf : NO_BIND= true Regarding your LDAP question, I'm still at work and it's 9PM so I'm a bit in a rush, but a quick google search turned up the following: http://bind-dlz.sourceforge.net/ldap_driver.html Regards, ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: Playing .ASX files via/within Firefox ?
Chris Hill ch...@monochrome.org!ch...@agora.rdrop.com wrote: ... that's a still image, a screenshot. Above that is a link labeled go to live camera - when you click on that, do you see live motion video? I don't even see that link. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: Playing .ASX files via/within Firefox ?
Ronald F. Guilmette r...@tristatelogic.com wrote: At least this gives me confidence that it can be done. I am still somewhat at a loss to know exactly _how_ it can be done however. For me, it just works. I installed 8.1-RELEASE (not all that long after it was released), installed FF and some other ports (using packages), and haven't done anything that I remember to get FF to work. However, as Chris Hill pointed out, I am only seeing the still image. I don't even see the link for a video stream. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
cvsup question
Hi cvsup -g -L 2 /usr/local/etc/cvsup/cvsup-ports.conf I have next conf for cvsup cat cvsup-ports.conf *default host=cvsup6.jp.FreeBSD.org *default base=/var/db *default prefix=/usr *default release=cvs date=2008.10.15.00.00.00 *default delete use-rel-suffix *default compress ports-databases date=2008.10.15.00.00.00 But when I update I see 'edits' on 2011 year despite on I notice to use 2008 year Edit ports/databases/zodb3/pkg-plist Add delta 1.13 2011.11.21.07.12.23 wen Add delta 1.12 2011.02.14.01.08.24 wen Add delta 1.11 2011.02.13.01.39.46 wen Add delta 1.10 2010.10.12.13.38.46 wen How that can be? -- С уважением, Коньков mailto:kes-...@yandex.ru ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Problems with keyboard on the loader menu
I'm having troubles with my keyboard when the bootstrapping reach the loader menu. My Keyboard simply doesn't works, but before and after the loader menu my keyboard works very well. I have seen BIOS settings like USB keyboard and nothing is helping. I didn't no one kernel tuning, I'm using GENERIC. The Server is a HP Proliant DL120 G6. Does anyone here can help me? -- Airton Arantes Coelho Filho ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
restore(8) to UFS on USB key: terrible slow
Hello, I encounter the following problem with UFS file systems on USB keys, i.e. the problem is not only with one key, but with all I have; the key in question here is: Dec 7 22:17:47 tinyCurrent kernel: umass0: Generic Mass Storage, class 0/0, rev 2.00/1.02, addr 3 on usbus4 Dec 7 22:17:47 tinyCurrent kernel: umass0: SCSI over Bulk-Only; quirks = 0x4101 Dec 7 22:17:47 tinyCurrent root: Unknown USB device: vendor 0x058f product 0x6387 bus uhub4 Dec 7 22:17:48 tinyCurrent kernel: umass0:0:0:-1: Attached to scbus0 Dec 7 22:17:48 tinyCurrent kernel: da0 at umass-sim0 bus 0 scbus0 target 0 lun 0 Dec 7 22:17:48 tinyCurrent kernel: da0: Generic Flash Disk 8.07 Removable Direct Access SCSI-2 device Dec 7 22:17:48 tinyCurrent kernel: da0: 40.000MB/s transfers Dec 7 22:17:48 tinyCurrent kernel: da0: 7650MB (15667200 512 byte sectors: 255H 63S/T 975C) and the system is: $ uname -a FreeBSD tinyCurrent 9.0-CURRENT FreeBSD 9.0-CURRENT #1 r21: Thu Oct 28 10:56:32 CEST 2010 The key was formatted the usual way for receiving a complete FreeBSD system for installation purpose: # fdisk -I da0 # fdisk -B da0 # bsdlabel -w da0s1 auto # bsdlabel -B da0s1 # bsdlabel -e da0s1 # newfs /dev/da0s1a # mount /dev/da0s1a /mnt When I now bulk write a big file to the file system, the write performance is reasonable fast, even with blocks of 512 bytes, it gives 2 MByte / sec: # dd if=usb.dmp of=/mnt/byte 10926520+0 records in 10926520+0 records out 5594378240 bytes transferred in 2538.942585 secs (2203428 bytes/sec) the file of ~5 GByte was written and I removed it again; to be sure that the file system is synced, I do an unmount(8) and mount(8) it again before: # df -kh /mnt Filesystem SizeUsed Avail Capacity Mounted on /dev/da0s1a7.2G5.2G1.4G79%/mnt tinyCurrent# umount /mnt tinyCurrent# mount /dev/da0s1a /mnt tinyCurrent# df -kh /mnt Filesystem SizeUsed Avail Capacity Mounted on /dev/da0s1a7.2G5.2G1.4G79%/mnt tinyCurrent# rm /mnt/byte tinyCurrent# df -kh /mnt Filesystem SizeUsed Avail Capacity Mounted on /dev/da0s1a7.2G 24M6.6G 0%/mnt when I now restore a DUMP into the filesystem, the restore(8) creates first the directory tree: # cd /mnt # restore rvf /home/guru/usb.dmp this goes very fast (as far as I see from the lines scrolling) for the first few thousand dirs: ... Make node ./src/src/contrib/sendmail/.svn Make node ./src/src/contrib/sendmail/.svn/tmp Make node ./src/src/contrib/sendmail/.svn/tmp/text-base Make node ./src/src/contrib/sendmail/.svn/tmp/prop-base Make node ./src/src/contrib/sendmail/.svn/tmp/props Make node ./src/src/contrib/sendmail/.svn/prop-base Make node ./src/src/contrib/sendmail/.svn/props Make node ./src/src/contrib/sendmail/.svn/text-base after a while it get stuck and only does create the dirs with a frequence of one per second; also the used space is growing very slow: # df -kh /mnt Filesystem SizeUsed Avail Capacity Mounted on /dev/da0s1a7.2G 42M6.6G 1%/mnt this is after an hour or so: only 42 MBytes are written now; Any idea, what is broken with this? Thanks matthias -- Matthias Apitz t +49-89-61308 351 - f +49-89-61308 399 - m +49-170-4527211 e g...@unixarea.de - w http://www.unixarea.de/ UNIX since V7 on PDP-11 | UNIX on mainframe since ESER 1055 (IBM /370) UNIX on x86 since SVR4.2 UnixWare 2.1.2 | FreeBSD since 2.2.5 ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
