Marc
Currently XFree 4.2.x doesn't have a support native
for this chipset.
But we have two workaround:
1.- Select vesa driver and add VideoRam 32767
parameter.
2.- Install XFree from CVSUP version 4.2.99.2
This version had full support for this chipset but
this will not make an entry in /var/de/pkg to be able
to show that this package is installed with pkg_info
command.
We have to wait for version 4.3.x
In the mean time, I'm trying to make the ports file
for the cvs version.
(--) PCI:*(0:2:0) Intel unknown chipset (0x2562) rev
1, Mem @ 0xf000/27, 0xffa8/19
--- Marc Dodsworth [EMAIL PROTECTED] wrote:
Hi
I'm trying to get XFree86 4.2.0_1.1 trying to run on
a motherboard with
an Intel's intregrated video.
The board is an Intel 845GRGL using the Intel 845G
chipset for Pentium
IV.
After reading through some messages relating to the
Intel 810 video I
have included the Device AGP option in to my
kernel so the onboard
video is now recognised as can be seen from the
attatched dmseg output
however when try and start X Windows it crashes with
Symbol xf86InterpretEDID from module
/usr/X11R6/lib/modules/libvbe.a is
unresol$
Symbol XAAInit from module
/usr/X11R6/lib/modules/drivers/i810_drv.o is
unresol$
Symbol XAAInit from module
/usr/X11R6/lib/modules/drivers/i810_drv.o is
unresol$Hi
I'm trying to get XFree86 4.2.0_1.1 trying to run on
a motherboard with
an Intel's intregrated video.
The board is an Intel 845GRGL using the Intel 845G
chipset for Pentium
IV.
After reading through some messages relating to the
Intel 810 video I
have included the Device AGP option in to my
kernel so the onboard
video is now recognised as can be seen from the
attatched dmseg output
however when try and start X Windows it crashes with
Symbol xf86InterpretEDID from module
/usr/X11R6/lib/modules/libvbe.a is
unresol$
Symbol XAAInit from module
/usr/X11R6/lib/modules/drivers/i810_drv.o is
unresol$
Symbol XAAInit from module
/usr/X11R6/lib/modules/drivers/i810_drv.o is
unresol$
Symbol XAAFillSolidRects from module
/usr/X11R6/lib/modules/drivers/i810_drv.o $
Symbol XAAFillSolidRects from module
/usr/X11R6/lib/modules/drivers/i810_drv.o $
My /etc/X11/XF86config (attached to this message)
file was generated by
xf86config in text mode called by sysinstall.
Can anyone suggest where I might be going wrong and
where to find a fix?
Thankx
Marc
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989,
1991, 1992, 1993, 1994
The Regents of the University of California. All
rights reserved.
FreeBSD 4.7-STABLE #0: Fri Nov 8 13:47:16 CST 2002
[EMAIL PROTECTED]:/usr/obj/usr/src/sys/ZEN
Timecounter i8254 frequency 1193182 Hz
CPU: Pentium 4 (1699.82-MHz 686-class CPU)
Origin = GenuineIntel Id = 0xf13 Stepping = 3
Features=0x3febfbffFPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,b28,ACC
real memory = 259260416 (253184K bytes)
avail memory = 247873536 (242064K bytes)
Preloaded elf kernel kernel at 0xc044a000.
netsmb_dev: loaded
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 11 entries at 0xc00f4690
npx0: math processor on motherboard
npx0: INT 16 interface
pcib0: Host to PCI bridge on motherboard
pci0: PCI bus on pcib0
agp0: Intel 82845 (i845 GMCH) SVGA controller mem
0xffa8-0xffaf,0xf000-0xf7ff irq 11
at device 2.0 on pci0
agp0: detected 8060k stolen memory
agp0: aperture size is 128M
uhci0: Intel 82801DB (ICH4) USB controller USB-A
port 0xe800-0xe81f irq 11 at device 29.0 on pci0
usb0: Intel 82801DB (ICH4) USB controller USB-A on
uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev
1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: Intel 82801DB (ICH4) USB controller USB-B
port 0xe880-0xe89f irq 9 at device 29.1 on pci0
usb1: Intel 82801DB (ICH4) USB controller USB-B on
uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev
1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: Intel 82801DB (ICH4) USB controller USB-C
port 0xec00-0xec1f irq 10 at device 29.2 on pci0
usb2: Intel 82801DB (ICH4) USB controller USB-C on
uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev
1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ulpt0: EPSON USB Printer, rev 1.10/1.00, addr 2,
iclass 7/1
pcib1: Intel 82801BA/BAM (ICH2) Hub to PCI bridge
at device 30.0 on pci0
pci1: PCI bus on pcib1
rl0: D-Link DFE-530TX+ 10/100BaseTX port
0xd800-0xd8ff mem 0xff8ff800-0xff8ff8ff irq 7 at
device 0.0 on pci1
rl0: Ethernet address: 00:05:5d:28:98:fa
miibus0: MII bus on rl0
rlphy0: RealTek internal media interface on
miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX,
100baseTX-FDX, auto
mlx0: Mylex version 2 RAID interface port
0xdc00-0xdc7f mem
