Can't get my USB-devices to work (except mouse...). 5.2.1-R
Hello. Seems like noone usb-device want to work on the pc. I have Intel Pentium Xeon 2.4GHz (E7505 Chipset based server) with SCSI, LSILogic MegaRAID controllers (LSI MegaRAID SCSI 320 v1.04, FW 1L19) and Intel 82801DB USB controller, USB1.0. There is also 4 SCSI HDDs (two Maxtor Atlas10K 35Gb and two 70Gb) in two RAID 1 arrays - amrd0 and amrd1 respectively. BIOS - PhoenixBIOS 4.0 Release 6.0. FreeBSD-5.2.1-RELEASE is installed (GENERIC kernel). Thus, device scbus device da device pass device uhci device ohci device usb device umass are present in kernel config. And usbd_enabled="yes" in rc.conf. When i attach either Flash-drive, or USB HDD (or just any usb-device), usbd keeps silence and doesn't report anything. Usb mouse is working fine (only if the mouse was connected before power-on or system startup) and usbd tells its words on 1st console when i detach mouse (but when i reattach it again, it won't work and usbd will tell nothing on 1st console). Can't figure out what's wrong, so i want ask you to help to solve this problem. dmesg is su-2.05b# dmesg Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.2.1-RELEASE #0: Sun Sep 5 00:59:48 MSD 2004 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/GENERIC Preloaded elf kernel "/boot/kernel/kernel" at 0xc0a2c000. ACPI APIC Table: Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Xeon(TM) CPU 2.40GHz (2392.05-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf25 Stepping = 5 Features=0xbfebfbff Hyperthreading: 2 logical CPUs real memory = 4025942016 (3839 MB) avail memory = 3912691712 (3731 MB) FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 ioapic0 irqs 0-23 on motherboard ioapic1 irqs 24-47 on motherboard ioapic2 irqs 48-71 on motherboard Pentium Pro MTRR support enabled acpi0: on motherboard pcibios: BIOS version 2.10 Using $PIR table, 21 entries at 0xc00fde70 acpi0: Power Button (fixed) Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 acpi_cpu0: on acpi0 acpi_cpu1: on acpi0 acpi_cpu2: on acpi0 device_probe_and_attach: acpi_cpu2 attach returned 6 acpi_cpu2: on acpi0 device_probe_and_attach: acpi_cpu2 attach returned 6 acpi_cpu2: on acpi0 device_probe_and_attach: acpi_cpu2 attach returned 6 acpi_cpu2: on acpi0 device_probe_and_attach: acpi_cpu2 attach returned 6 acpi_cpu2: on acpi0 device_probe_and_attach: acpi_cpu2 attach returned 6 acpi_cpu2: on acpi0 device_probe_and_attach: acpi_cpu2 attach returned 6 pcib0: port 0xcf8-0xcff on acpi0 pci0: on pcib0 agp0: mem 0xf400-0xf7ff at device 0.0 on pci0 pci0: at device 0.1 (no driver attached) pcib1: mem 0xf800-0xfbff at device 1.0 on pci0 pci1: on pcib1 pcib2: at device 2.0 on pci0 pcib2: could not get PCI interrupt routing table for \\_SB_.PCI0.HLB_ - AE_NOT_FOUND pci2: on pcib2 pci2: at device 28.0 (no driver attached) pcib3: at device 29.0 on pci2 pci3: on pcib3 amr0: mem 0xfc00-0xfc00 irq 28 at device 2.0 on pci3 amr0: Firmware 1L19, BIOS 1.04, 64MB RAM pci2: at device 30.0 (no driver attached) pcib4: at device 31.0 on pci2 pci4: on pcib4 pci0: at device 2.1 (no driver attached) uhci0: port 0x6800-0x681f irq 16 at device 29.0 on pci0 usb0: on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: port 0x6820-0x683f irq 19 at device 29.1 on pci0 usb1: on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: port 0x6840-0x685f irq 18 at device 29.2 on pci0 usb2: on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered pci0: at device 29.7 (no driver attached) pcib5: at device 30.0 on pci0 pci5: on pcib5 pci5: at device 2.0 (no driver attached) fxp0: port 0x7400-0x743f mem 0xf020-0xf021,0xf0221000-0xf0221fff irq 18 at device 3.0 on pci5 fxp0: Ethernet address 00:04:23:88:2d:56 miibus0: on fxp0 inphy0: on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto isab0: at device 31.0 on pci0 isa0: on isab0 atapci0: port 0x6860-0x686f,0-0x3,0-0x7,0-0x3,0-0x7 at device 31.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata0: [MPSAFE] ata1: at 0x170 irq 15 on atapci0 ata1: [MPSAFE] pci0: at device 31.3 (no driver attached) acpi_button0: on acpi0 atkbdc0: port 0x64,0x60 irq 1 on acpi0 atkbd0: flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: irq 12 on atkbdc0 psm0: model NetMouse/NetScroll Optical, device ID 0 fdc0: cmd 3 failed at out byte 1 of 3 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A sio1 port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A pp
Problems using USB-devices in 5.2.1
Hello. I've encountered a problem using USB Flash drives and USB HDD. I have 2 PCs, first - Intel Pentium PII 233MHz on LX chipset with Intel USB controller, USB1.0 (let's call this pc1), and second - Intel Pentium Xeon 2.4GHz (E7505 Chipset based server) with SCSI, LSILogic MegaRAID controllers (LSI MegaRAID SCSI 320 v1.04, HA -0 (Bus 3 Dev 2) Standard FW 1L19) and Intel 82801DB USB controller, USB1.0. There is also 4 SCSI HDDs (two Maxtor Atlas10K 35Gb and two 70Gb) in two RAID 1 arrays - amrd0 and amrd1 respectively. BIOS - PhoenixBIOS 4.0 Release 6.0 (let's call this pc2). FreeBSD-5.2.1-RELEASE is installed on both pc1 and pc2 (using GENERIC kernel). Thus, device scbus device da device pass device uhci device ohci device ehci device usb device umass are present in kernel config. And usbd_enabled="yes" in rc.conf. Systems are fresh-installed and no configs were changed on both PCs. USB-Drives using on pc1 is problemless. usbd is reporting on 1st console attach/detach actions, umassX and daX devices are created properly, then, mount - is no question, it works fine. But, the problem is pc2. When i attach either Flash-drive, or USB HDD, usbd keeps silence and doesn't report anything. So umass and da devices (or smth else) are NOT created. And so, i can't use any usb-drives at all. Usb mouse is working fine and usbd tells its words on 1st console when i detach mouse. Can't figure out what's wrong, so i want ask you to help to solve this problem. Posting in BSD-forums and maillists, reading mans, docs, howtos and handbooks, talking with bsd-admins didn't give me any solution. In addition, (from pc2) uname -a is FreeBSD xx.xx.xx 5.2.1-RELEASE FreeBSD 5.2.1-RELEASE #0: Sun Sep 5 00:59:48 MSD 2004 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/GOLD i386 Yes, kernel here is not GENERIC, but GOLD. GOLD is just a GENERIC kernel recompiled with "device acpi" on someone's advice. But it didn't solve any problem, the behaviour of the system is the same as with GENERIC. dmesg is su-2.05b# dmesg Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.2.1-RELEASE #0: Sun Sep 5 00:59:48 MSD 2004 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/GOLD Preloaded elf kernel "/boot/kernel/kernel" at 0xc0a2c000. ACPI APIC Table: Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Xeon(TM) CPU 2.40GHz (2392.05-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf25 Stepping = 5 Features=0xbfebfbff Hyperthreading: 2 logical CPUs real memory = 4025942016 (3839 MB) avail memory = 3912691712 (3731 MB) FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 ioapic0 irqs 0-23 on motherboard ioapic1 irqs 24-47 on motherboard ioapic2 irqs 48-71 on motherboard Pentium Pro MTRR support enabled acpi0: on motherboard pcibios: BIOS version 2.10 Using $PIR table, 21 entries at 0xc00fde70 acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 acpi_cpu0: on acpi0 acpi_cpu1: on acpi0 acpi_cpu2: on acpi0 device_probe_and_attach: acpi_cpu2 attach returned 6 acpi_cpu2: on acpi0 device_probe_and_attach: acpi_cpu2 attach returned 6 acpi_cpu2: on acpi0 device_probe_and_attach: acpi_cpu2 attach returned 6 acpi_cpu2: on acpi0 device_probe_and_attach: acpi_cpu2 attach returned 6 acpi_cpu2: on acpi0 device_probe_and_attach: acpi_cpu2 attach returned 6 acpi_cpu2: on acpi0 device_probe_and_attach: acpi_cpu2 attach returned 6 pcib0: port 0xcf8-0xcff on acpi0 pci0: on pcib0 agp0: mem 0xf400-0xf7ff at device 0.0 on pci0 pci0: at device 0.1 (no driver attached) pcib1: mem 0xf800-0xfbff at device 1.0 on pci0 pci1: on pcib1 pcib2: at device 2.0 on pci0 pcib2: could not get PCI interrupt routing table for \\_SB_.PCI0.HLB_ - AE_NOT_FOUND pci2: on pcib2 pci2: at device 28.0 (no driver attached) pcib3: at device 29.0 on pci2 pci3: on pcib3 amr0: mem 0xfc00-0xfc00 irq 28 at device 2.0 on pci3 amr0: Firmware 1L19, BIOS 1.04, 64MB RAM pci2: at device 30.0 (no driver attached) pcib4: at device 31.0 on pci2 pci4: on pcib4 pci0: at device 2.1 (no driver attached) uhci0: port 0x6800-0x681f irq 16 at device 29.0 on pci0 usb0: on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered ums0: Logitech N42, rev 1.00/4.01, addr 2, iclass 3/1 ums0: 2 buttons uhci1: port 0x6820-0x683f irq 19 at device 29.1 on pci0 usb1: on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: port 0x6840-0x685f irq 18 at device 29.2 on pci0 usb2: on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2:
Problems using USB Storage devices...
Hi, I've encountered a problem using USB Flash drives and USB HDD. I have 2 PCs, first - Intel Pentium PII 233MHz on LX chipset with Intel USB controller, USB1.0 (let's call this pc1), and second - Intel Pentium Xeon 2.4GHz with SCSI, LSILogic MegaRAID controllers and Intel 82801DB USB controller, USB1.0. There is also 4 SCSI HDDs in two RAID 1 - amrd0 and amrd1 respectively (let's call this pc2). FreeBSD-5.2.1-RELEASE is installed on both pc1 and pc2 (using GENERIC kernel). Thus, device scbus device da device pass device uhci device ohci device ehci device usb device umass are present in kernel config. And usbd_enabled="yes" in rc.conf. Systems are fresh-installed and no configs were changed on both PCs. USB-Drives using on pc1 is problemless. usbd is reporting on 1st console attach/detach actions, umassX and daX devices are created properly, then, mount - is no question, it works fine. But, the problem is pc2. When i attach either Flash-drive, or USB HDD, usbd keeps silence and doesn't report anything. So umass and da devices are NOT created. And so, i can't use any usb-drives at all. Usb mouse is working fine and usbd tells its words on 1st console when i detach mouse. Can't figure out what's the problem, so i want ask you to help. Can you explain, what is wrong? Thanks in advance!! uname -a is FreeBSD xxx.xxx.xxx 5.2.1-RELEASE FreeBSD 5.2.1-RELEASE #0: Mon Feb 23 20:45:55 GMT 2004 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/GENERIC i386 Flash-drives are SanDisk 128Mb and JetFlash 256Mb, USB HDD is Maxtor EXT 200Mb USB2.0 USB hubs on pc2 are not broken. They worked fine on previous MS Windows 2003 Server. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
