Re: enable WEP for the wlan card WG311T on freeBSD 5.4
I use static IP's I've tried: # ifconfig ath0 inet 192.168.200.20 netmask 255.255.255.0 ssid myessid wepkey 1:0xXX wepmode on but still doesn't work. without WEP works well, but I need WEP. --- On Fri 08/12, nawcom [EMAIL PROTECTED] wrote: From: nawcom [mailto: [EMAIL PROTECTED] To: [EMAIL PROTECTED], freebsd-questions@freebsd.org Date: Fri, 12 Aug 2005 23:37:09 -0400 Subject: Re: enable WEP for the wlan card WG311T on freeBSD 5.4 does the router/computer youre conencting to use static ips, or does it bruse dhcp?brbryou shouldnt need to provide channel numbers or mediaopt info.brbrBenbrbrPK wrote:brbrhi brbrhowto enable WEP for the wlan card WG311T on freeBSD 5.4 ?brbrI'v tried:brbr# ifconfig ath0 inet 192.168.200.20 netmask 255.255.255.0 channel9 ssid myessid wepmode on weptxkey 1 wepkey 1:0xXX brbrbr# ifconfig ath0 inet 192.168.200.20 netmask 255.255.255.0 channel 9 ssid myessid wepmode on weptxkey 1 wepkey 1:0xXX mode 11b brbrbr# ifconfig ath0 inet 192.168.200.20 netmask 255.255.255.0 channel 9 ssid myessid wepmode on weptxkey 1 wepkey 0xXX media DS/11Mbpsbrbr# ifconfig ath0 inet 192.168.200.20 netmask 255.255.255.0 channel 9 ssid myessid wepmode on weptxkey 1 wepkey 0xXX media OFDM/54Mbpsbrbr# ifconfigbrath0: flags=8843UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST mtu 1500brinet6 fe90::10e:c4ff:fd25:d1c9%ath0 prefixlen 64 scopeid 0x1brinet 192.168.200.20 netmask 0xff00 broadcast 192.168.200.255brether 00:0f:a4:15:c2:b8 brmedia: IEEE 802.11 Wireless Ethernet autoselect mode 11b (DS/1Mbps)brstatus: no carrierbrssid myessid 1:myessid brchannel 9 authmode OPEN powersavemode OFF powersavesleep 100brrtsthreshold 2312 protmode CTSbrwepmode MIXED weptxkey 1brwepkey 1:104-bitbrbrbrbut still doesn't work !brbrbrbrbrbrbrbrbr___brJoin Excite! - http://www.excite.combrThe most personalized portal on the Web!brbrbr___brfreebsd-questions@freebsd.org mailing listbrhttp://lists.freebsd.org/mailman/listinfo/freebsd-questionsbrTo unsubscribe, send any mail to [EMAIL PROTECTED]br brbrbr ___ Join Excite! - http://www.excite.com The most personalized portal on the Web! ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
enable WEP for the wlan card WG311T on freeBSD 5.4
hi howto enable WEP for the wlan card WG311T on freeBSD 5.4 ? I'v tried: # ifconfig ath0 inet 192.168.200.20 netmask 255.255.255.0 channel9 ssid myessid wepmode on weptxkey 1 wepkey 1:0xXX # ifconfig ath0 inet 192.168.200.20 netmask 255.255.255.0 channel 9 ssid myessid wepmode on weptxkey 1 wepkey 1:0xXX mode 11b # ifconfig ath0 inet 192.168.200.20 netmask 255.255.255.0 channel 9 ssid myessid wepmode on weptxkey 1 wepkey 0xXX media DS/11Mbps # ifconfig ath0 inet 192.168.200.20 netmask 255.255.255.0 channel 9 ssid myessid wepmode on weptxkey 1 wepkey 0xXX media OFDM/54Mbps # ifconfig ath0: flags=8843UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST mtu 1500 inet6 fe90::10e:c4ff:fd25:d1c9%ath0 prefixlen 64 scopeid 0x1 inet 192.168.200.20 netmask 0xff00 broadcast 192.168.200.255 ether 00:0f:a4:15:c2:b8 media: IEEE 802.11 Wireless Ethernet autoselect mode 11b (DS/1Mbps) status: no carrier ssid myessid 1:myessid channel 9 authmode OPEN powersavemode OFF powersavesleep 100 rtsthreshold 2312 protmode CTS wepmode MIXED weptxkey 1 wepkey 1:104-bit but still doesn't work ! ___ Join Excite! - http://www.excite.com The most personalized portal on the Web! ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: howto load or install wlan_wep module on freeBSD 5.4 ?
Is the channel correct? yes, it is, without wep works well Do you have an active firewall that could be blocking the wireless interface? no, I don't have any firewall active authmode OPEN is the problem, because ifconfig can not set to SHARED automatically or manually ! do you have authmode OPEN and you use a shared key ? I don't thonk so. --- On Mon 08/08, Andrew L. Gould [EMAIL PROTECTED] wrote: From: Andrew L. Gould [mailto: [EMAIL PROTECTED] To: [EMAIL PROTECTED] Cc: freebsd-questions@freebsd.org Date: Mon, 8 Aug 2005 20:46:29 -0500 Subject: Re: howto load or install wlan_wep module on freeBSD 5.4 ? On Mon, 8 Aug 2005 19:58:03 -0400 (EDT)brPK [EMAIL PROTECTED] wrote:br br hibr br I removed the interface conf. from the cable but still doesn't work.br br What's very strange is authmode OPEN:br br # ifconfigbr ath0: flags=8843UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST mtu 1500br inet 192.168.2.20 netmask 0xff00 broadcast 192.168.2.255br inet6 fe80::20f:b5ff:fe26:d1c9%ath0 prefixlen 64 scopeid 0x1br ether 00:0f:c4:12:b2:b8br media: IEEE 802.11 Wireless Ethernet autoselect (DS/1Mbps)br status: no carrierbr ssid myssid 1:myssidbr channel -1 authmode OPEN powersavemode OFF powersavesleep 100br rtsthreshold 2312 protmode CTSbr wepmode MIXED weptxkey 1br wepkey 1:104-bitbr br howto change it to shared ?br br # ifconfig ath0 authmode sharedbr ifconfig: SIOCS80211: Invalid argumentbrbrI also use a shared key; but I've never had to set the mode explicitly.brbrIs the channel correct?brbrDo you have an active firewall that could be blocking the wirelessbrinterface?brbrAndrew Gouldbr ___ Join Excite! - http://www.excite.com The most personalized portal on the Web! ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: howto load or install wlan_wep module on freeBSD 5.4 ?
is your wireless router on open or shared ? If I set my wireless router on open, then it works without problems and my ifconfig looks like yours. from man ifconfig: http://www.gsp.com/cgi-bin/man.cgi?section=8topic=ifconfig authmode mode For IEEE 802.11 wireless interfaces, set the desired authentication mode in infrastructure mode. Not all adaptors support all modes. The set of valid modes is none, open, and shared. Modes are case insensitive. so you should be able to choose authentication mode open is for me open and shared is shared --- On Tue 08/09, Andrew L. Gould [EMAIL PROTECTED] wrote: From: Andrew L. Gould [mailto: [EMAIL PROTECTED] To: [EMAIL PROTECTED] Cc: freebsd-questions@freebsd.org Date: Tue, 9 Aug 2005 07:38:57 -0500 Subject: Re: howto load or install wlan_wep module on freeBSD 5.4 ? On Tue, 9 Aug 2005 05:58:02 -0400 (EDT)brPK [EMAIL PROTECTED] wrote:brbr br Is the channel correct?br br yes, it is, without wep works well br br Do you have an active firewall that could be blocking the wirelessbr interface?br br no, I don't have any firewall activebr br br authmode OPEN is the problem, because ifconfig can not set to SHAREDbr automatically or manually !br br do you have authmode OPEN and you use a shared key ?br I don't thonk so.br brbrYes, I do use a shared key. If I don't specify a shared key, ourbrWindows PC's fail to connect to the AP.brbrFrom my wireless PC:brbr# ifconfig ath0brath0: flags=8843UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST mtu 1500br inet6 fe80::20d:88ff:fec7:5d89%ath0 prefixlen 64 scopeid 0x2 br inet 192.168.63.25 netmask 0xff00 broadcast 192.168.63.255br ether 00:0d:88:c7:5d:89br media: IEEE 802.11 Wireless Ethernet autoselect (DS/11Mbps)br status: associatedbr ssid datawok 1:datawokbr channel 6 authmode OPEN powersavemode OFF powersavesleep 100brrtsthreshold 2312 protmode CTSbr wepmode MIXED weptxkey 1brwepkey 1:40-bitbrbrbrPlease note that the AP is 802.11b, thus the automatic selectionbrof 11Mbps.brbrIf I bootup without any network configuration, here's all Ibrhave to do to get the wireless card working:brbrifconfig ath0 inet 192.168.63.25 netmask 255.255.255.0 \br ssid datawok nwkey 0xXXbrroute add default 192.168.63.1brecho nameserver 24.204.0.4 /etc/resolv.confbrbrbrAndrew Gouldbr ___ Join Excite! - http://www.excite.com The most personalized portal on the Web! ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: howto load or install wlan_wep module on freeBSD 5.4 ?
my question was if your wireless accesspoint or router is set to OPEN or SHARED. on my wireless router under security settings I have 2 options: - security mode: I can set OPEN or SHARED - cipher type: I can disble or enable WEP if I set WEP on the router and set the security mode OPEN, then my windows works as shared too, but the router is still OPEN. my connection is working without WEP only, but this is not what I want. without WEP was working before I did this posting. I need WEP and I want the connection with WEP ! --- On Tue 08/09, Andrew L. Gould [EMAIL PROTECTED] wrote: From: Andrew L. Gould [mailto: [EMAIL PROTECTED] To: [EMAIL PROTECTED] Cc: freebsd-questions@freebsd.org Date: Tue, 9 Aug 2005 14:11:34 -0500 Subject: Re: howto load or install wlan_wep module on freeBSD 5.4 ? On Tue, 9 Aug 2005 13:56:02 -0400 (EDT)brPK [EMAIL PROTECTED] wrote:brbr br is your wireless router on open or shared ? br If I set my wireless router on open, then it works without problemsbr and my ifconfig looks like yours. br br from man ifconfig:br br http://www.gsp.com/cgi-bin/man.cgi?section=8topic=ifconfigbr br authmode modebrFor IEEE 802.11 wireless interfaces, set the desiredbr authentication mode in infrastructure mode. Not all adaptors supportbr all modes. The set of valid modes is none, open, and shared.br Modes are case insensitive.br br br so you should be able to choose authentication modebr open is for me open and shared is sharedbr brbrI cannot find a place in my Access Point's configuration applicationbrwhere it states shared or open. My Windows PC is set tobrshared.brbrI'm glad you got you connection working.brbrAndrew Gouldbr ___ Join Excite! - http://www.excite.com The most personalized portal on the Web! ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
howto load or install wlan_wep module on freeBSD 5.4 ?
hi I have wlan card WG311T from Netgear installed on freeBSD 5.4 # ifconfig ath0: flags=8843UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST mtu 1500 inet 192.168.2.20 netmask 0xff00 broadcast 192.168.2.255 inet6 fe80::20f:b5ff:fe26:d1c9%ath0 prefixlen 64 scopeid 0x1 ether 00:0f:c4:12:b2:b8 media: IEEE 802.11 Wireless Ethernet autoselect (DS/1Mbps) status: no carrier ssid myssid 1:myssid channel -1 authmode OPEN powersavemode OFF powersavesleep 100 rtsthreshold 2312 protmode CTS wepmode MIXED weptxkey 1 wepkey 1:104-bit but it doesn't work. I think WEP is not active ! in /etc/rc.conf I have: ifconfig_ath0=inet 192.168.2.20 netmask 255.255.255.0 ssid myssid wepmode on wepkey 0xXX it seems I'm missing wlan_wep module # kldstat Id Refs AddressSize Name 1 16 0xc040 5dde24 kernel 21 0xc09de000 47dc snd_via8233.ko 32 0xc09e3000 1d4fcsound.ko 41 0xc0a01000 b948 if_ath.ko 52 0xc0a0d000 279a8ath_hal.ko 6 14 0xc0a35000 56270acpi.ko 71 0xc25fc000 6000 linprocfs.ko 81 0xc265b000 17000linux.ko 91 0xc2f27000 9000 ntfs.ko howto activate or install wlan_wep module ? piotr ___ Join Excite! - http://www.excite.com The most personalized portal on the Web! ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: howto load or install wlan_wep module on freeBSD 5.4 ?
1. Poor signal strength no, very good (1 meter distance) windows installed on the same machine shows 100% 2. Improperly configured nameserver information (/etc/resolv.conf) it's correct, because with ethernet nic works well 3. Improperly configured default gateway it's correct, otherwise I cannot ping the default router from the ethernet nic other question howto set (change) DS/1Mbps to 54Mbps ? --- On Mon 08/08, Andrew L. Gould [EMAIL PROTECTED] wrote: From: Andrew L. Gould [mailto: [EMAIL PROTECTED] To: [EMAIL PROTECTED] Cc: freebsd-questions@freebsd.org Date: Mon, 8 Aug 2005 14:57:22 -0500 Subject: Re: howto load or install wlan_wep module on freeBSD 5.4 ? On Mon, 8 Aug 2005 15:09:31 -0400 (EDT)brPK [EMAIL PROTECTED] wrote:brbr br hibr br I have wlan card WG311T from Netgear installed on freeBSD 5.4br br # ifconfigbr ath0: flags=8843UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST mtu 1500br inet 192.168.2.20 netmask 0xff00 broadcast 192.168.2.255br inet6 fe80::20f:b5ff:fe26:d1c9%ath0 prefixlen 64 scopeid 0x1br ether 00:0f:c4:12:b2:b8br media: IEEE 802.11 Wireless Ethernet autoselect (DS/1Mbps)br status: no carrierbr ssid myssid 1:myssidbr channel -1 authmode OPEN powersavemode OFF powersavesleep 100br rtsthreshold 2312 protmode CTSbr wepmode MIXED weptxkey 1br wepkey 1:104-bitbr br but it doesn't work.br br I think WEP is not active ! br br in /etc/rc.conf I have:br br ifconfig_ath0=inet 192.168.2.20 netmask 255.255.255.0 ssid myssidbr wepmode on wepkey 0xXX br br it seems I'm missing wlan_wep modulebr br # kldstatbr Id Refs AddressSize Namebr 1 16 0xc040 5dde24 kernelbr 21 0xc09de000 47dc snd_via8233.kobr 32 0xc09e3000 1d4fcsound.kobr 41 0xc0a01000 b948 if_ath.kobr 52 0xc0a0d000 279a8ath_hal.kobr 6 14 0xc0a35000 56270acpi.kobr 71 0xc25fc000 6000 linprocfs.kobr 81 0xc265b000 17000linux.kobr 91 0xc2f27000 9000 ntfs.kobr br howto activate or install wlan_wep module ?br br piotr br brbrI'm using an atheros wireless PCI adapter with 64bit WEP. I've neverbrhad to load a wep module.brbrHow do you know the configuration isn't working? Are you unable tobrping other IP addresses? Are you unable to ping other host names?brbrSome non-WEP problems could inlude:br1. Poor signal strengthbr2. Improperly configured nameserver information (/etc/resolv.conf)br3. Improperly configured default gatewaybrbrMore information would be helpful.brbrAndrew Gouldbr ___ Join Excite! - http://www.excite.com The most personalized portal on the Web! ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: howto load or install wlan_wep module on freeBSD 5.4 ?
yes, but cable is disabled at the moment I think there is a problem with DS/1Mbps this driver seems to allow by default the transfer rate: 1 Mbps my wlan access point accept only 54Mbps ! I think I must change to 54Mbps using ifconfig Do you know, howto change this ? # ifconfig ath0 media DS/54Mbps ifconfig: unknown media subtype: DS/54Mbps --- On Mon 08/08, Andrew L. Gould [EMAIL PROTECTED] wrote: From: Andrew L. Gould [mailto: [EMAIL PROTECTED] To: [EMAIL PROTECTED] Cc: freebsd-questions@freebsd.org Date: Mon, 8 Aug 2005 16:07:11 -0500 Subject: Re: howto load or install wlan_wep module on freeBSD 5.4 ? On Mon, 8 Aug 2005 16:57:44 -0400 (EDT)brPK [EMAIL PROTECTED] wrote:brbr br 1. Poor signal strengthbr br no, very good (1 meter distance)br windows installed on the same machine shows 100% br br 2. Improperly configured nameserver information (/etc/resolv.conf)br br it's correct, because with ethernet nic works wellbr br 3. Improperly configured default gatewaybr br it's correct, otherwise I cannot ping the default router frombr the ethernet nicbr br other questionbr br howto set (change) DS/1Mbps to 54Mbps ? br br brbrDo you have your cable and wireless interfaces configured to the samebrnetwork?brbrAndrew Gouldbr ___ Join Excite! - http://www.excite.com The most personalized portal on the Web! ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: howto load or install wlan_wep module on freeBSD 5.4 ?
hi I removed the interface conf. from the cable but still doesn't work. What's very strange is authmode OPEN: # ifconfig ath0: flags=8843UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST mtu 1500 inet 192.168.2.20 netmask 0xff00 broadcast 192.168.2.255 inet6 fe80::20f:b5ff:fe26:d1c9%ath0 prefixlen 64 scopeid 0x1 ether 00:0f:c4:12:b2:b8 media: IEEE 802.11 Wireless Ethernet autoselect (DS/1Mbps) status: no carrier ssid myssid 1:myssid channel -1 authmode OPEN powersavemode OFF powersavesleep 100 rtsthreshold 2312 protmode CTS wepmode MIXED weptxkey 1 wepkey 1:104-bit howto change it to shared ? # ifconfig ath0 authmode shared ifconfig: SIOCS80211: Invalid argument --- On Mon 08/08, Andrew L. Gould [EMAIL PROTECTED] wrote: From: Andrew L. Gould [mailto: [EMAIL PROTECTED] To: [EMAIL PROTECTED] Cc: freebsd-questions@freebsd.org Date: Mon, 8 Aug 2005 16:43:02 -0500 Subject: Re: howto load or install wlan_wep module on freeBSD 5.4 ? On Mon, 8 Aug 2005 17:19:54 -0400 (EDT)brPK [EMAIL PROTECTED] wrote:br br yes, but cable is disabled at the moment brbrDo you mean that the cable is unplugged or that you removed thebrinterface configuration? Unplugging the cable does not change orbrremove the interface configuration.brbrReconfigure your cabled interface to 10.0.0.1, then test your wirelessbrinterface again.brbr br I think there is a problem with DS/1Mbpsbr this driver seems to allow by default the transfer rate: 1 Mbps br br my wlan access point accept only 54Mbps !br br I think I must change to 54Mbps using ifconfigbr br Do you know, howto change this ?br br # ifconfig ath0 media DS/54Mbpsbr ifconfig: unknown media subtype: DS/54Mbpsbr brbrI think this is handled automatically by default. (I could be verybrwrong.) br ___ Join Excite! - http://www.excite.com The most personalized portal on the Web! ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: cannot install ntop under freeBSD 5.5
I sent 3 mails to the port maintainer but I didn't get any replies. That's very strange ! --- On Wed 07/27, Glenn Dawson [EMAIL PROTECTED] wrote: From: Glenn Dawson [mailto: [EMAIL PROTECTED] To: [EMAIL PROTECTED] Date: Wed, 27 Jul 2005 08:10:40 -0700 Subject: Re: cannot install ntop under freeBSD 5.5 At 07:05 AM 7/27/2005, you wrote:brbrthanks,brbrnow it works, but how can I get later XML Plugin running with ntop ?brI need it.brbrProbably the best thing to do is send an email to the port maintainer for brntop, and copy the maintainer for libxml2. I looked at it enough to see brthat there was a problem there, but I didn't spend the time to find out if brit was the fault of ntop, or the xml library.brbrlooks like the maintainer for ntop port is [EMAIL PROTECTED]brbrand for libxml2 port is [EMAIL PROTECTED]brbr-Glennbrbrbrgreetingsbrpiotrbrbrbr --- On Wed 07/27, Glenn Dawson [EMAIL PROTECTED] wrote:brFrom: Glenn Dawson [mailto: [EMAIL PROTECTED]brTo: [EMAIL PROTECTED]brDate: Wed, 27 Jul 2005 06:19:53 -0700brSubject: Re: cannot install ntop under freeBSD 5.5brbrAt 06:18 AM 7/27/2005, you wrote:brbrthanks,brbrbut now I get brrrd disaster:brbryeah...just delete the rrdtool port and reinstall brafter you've built ntop.brbr-Glennbrbrbrrm -f br.libs/rrdPlugin.lobrcc -DHAVE_CONFIG_H -I. -I. -I.. -I.. br-I/usr/local/include -I/usr/include br-I../myrrd -DFREEBSD br-I/usr/local/include -I/usr/include br-I/usr/local/include br-I/usr/local/include -I/usr/local/include br-I/usr/include br-I/usr/include -g -O -pipe -I/usr/local/include -g -Wshadow brbr-Wpointer-arith -Wmissing-prototypes -Wmissing-declarations brbr-Wnested-externs -fPIC -MT rrdPlugin.lo -MD -MP -MF br.deps/rrdPlugin.Tpo -c brrrdPlugin.c -fPIC -DPIC -o br.libs/rrdPlugin.lobrrrdPlugin.c: In function br`graphCounter':brrrdPlugin.c:583: error: too few arguments to function br`rrd_graph'brrrdPlugin.c: In function br`netflowSummary':brrrdPlugin.c:728: error: too few arguments to brfunction `rrd_graph'brrrdPlugin.c: In functionbr`graphSummary':brrrdPlugin.c:926: error: too few arguments to function br`rrd_graph'brgmake[3]: *** [rrdPlugin.lo] Error 1brgmake[3]: Leaving brdirectory `/usr/ports/net/ntop/work/ntop/plugins'brgmake[2]: *** br[all-recursive] Error 1brgmake[2]: Leaving directory br`/usr/ports/net/ntop/work/ntop/plugins'brgmake[1]: *** [all-recursive] brError 1brgmake[1]: Leaving directory br`/usr/ports/net/ntop/work/ntop'brgmake: *** [all] Error 2br*** Error brcode 2brbrStop in /usr/ports/net/ntop.br*** Error code br1brbrI cannot use both at the same time:brbrmake rmconfig in br/usr/ports/net/ntopbrbrand this patch in /usr/ports/net/ntop/files brto correct rrd:brbr--- ntop.h.orig Tue Jul 26 03:39:16 2005br+++ brntop.h Tue Jul 26 03:39:29 2005br@@ -447,7 +447,7 br@@br #endifbrbr #ifndef EMBEDDEDbr-#include brrrd.hbr+#include myrrd/rrd.hbr #endifbrbr #ifdef brHAVE_GETOPT_Hbrbrbrthis patch should solve rrdPluginbrdisaster.brbrgreetingsbrpiotrbrbrbrbrbrbrbr br--- On Wed 07/27, Glenn Dawson [EMAIL PROTECTED] wrote:brFrom: brGlenn Dawson [mailto: [EMAIL PROTECTED]brTo: br[EMAIL PROTECTED]brDate: Wed, 27 Jul 2005 05:39:36 -0700brSubject: brRe: cannot install ntop under freeBSD 5.5brbrAt 04:36 AM 7/27/2005, bryou wrote:brbrand howto build ntop without XML brplugin br?brbrJust do make rmconfig in /usr/ports/net/ntopbrbrThen brbrwhen you do make install clean it should prompt you with a menu of brbrbroptional components. XML should be turned off by default, so if bryou brjust braccept the defaults, it should build without brbrerror.brbr-Glennbrbrbrbrbrbr --- On Mon 07/25, brGlenn brDawson [EMAIL PROTECTED] wrote:brFrom: Glenn Dawson br[mailto: br[EMAIL PROTECTED]brTo: [EMAIL PROTECTED], brbrfreebsd-questions@freebsd.orgbr Cc: brbr[EMAIL PROTECTED]brDate: Mon,br25 Jul 2005 17:34:13 br-0700brSubject: Re: cannot install ntop under brfreeBSD 5.5brbrAt br12:17 PM 7/25/2005, PK brwrote:brbrhibrbrI did what you brbrsuggested.brI've brdeinstalled rrdtool completely, tried install brntop but brnow I get brbrfollowing horrible brbrbrerrors:brbrbrxmldumpPlugin.c:36:2: brwarning:brbr#warningbrxmldumpPlugin.c:37:2: warning: #warning brbrbrbr===brxmldumpPlugin.c:38:2: brbrbrwarning: #warningbrxmldumpPlugin.c:39:2: warning: #warning brThe brinclude brof gdome.h that brfollows will generate a lot brbrbrofbrxmldumpPlugin.c:40:2: warning: #warning compile warnings brabout brbr'shadows a brglobal brdeclaration'.brxmldumpPlugin.c:41:2: brwarning: br#warning brUnfortunately, it's the way this brcrud is coded brand brbrcan'tbrxmldumpPlugin.c:42:2: warning: #warning be fixed. Just brbrignorebrbrthem!brxmldumpPlugin.c:43:2: warning: brbrbr#warningbrbr[snip]brbrbrIn file included from brbrbrxmldumpPlugin.c:1730:brxml_g_intf.inc: In function brbrbr`dumpXML_interfaces':brxml_g_intf.inc:33: warning: brbrnestedbrextern
Re: cannot install ntop under freeBSD 5.5
and howto build ntop without XML plugin ? --- On Mon 07/25, Glenn Dawson [EMAIL PROTECTED] wrote: From: Glenn Dawson [mailto: [EMAIL PROTECTED] To: [EMAIL PROTECTED], freebsd-questions@freebsd.org Cc: [EMAIL PROTECTED] Date: Mon, 25 Jul 2005 17:34:13 -0700 Subject: Re: cannot install ntop under freeBSD 5.5 At 12:17 PM 7/25/2005, PK wrote:brbrhibrbrI did what you suggested.brI've deinstalled rrdtool completely, tried install ntop but now I get brfollowing horrible errors:brbrbrxmldumpPlugin.c:36:2: warning: #warningbrxmldumpPlugin.c:37:2: warning: #warning br===brxmldumpPlugin.c:38:2: warning: #warningbrxmldumpPlugin.c:39:2: warning: #warning The include of gdome.h that brfollows will generate a lot ofbrxmldumpPlugin.c:40:2: warning: #warning compile warnings about 'shadows a brglobal declaration'.brxmldumpPlugin.c:41:2: warning: #warning Unfortunately, it's the way this brcrud is coded and can'tbrxmldumpPlugin.c:42:2: warning: #warning be fixed. Just ignore them!brxmldumpPlugin.c:43:2: warning: #warningbrbr[snip]brbrbrIn file included from xmldumpPlugin.c:1730:brxml_g_intf.inc: In function `dumpXML_interfaces':brxml_g_intf.inc:33: warning: nested extern declaration of `BufferTooShort'brgmake[3]: *** [xmldumpPlugin.lo] Error 1brgmake[3]: Leaving directory `/usr/ports/net/ntop/work/ntop/plugins'brgmake[2]: *** [all-recursive] Error 1brgmake[2]: Leaving directory `/usr/ports/net/ntop/work/ntop/plugins'brgmake[1]: *** [all-recursive] Error 1brgmake[1]: Leaving directory `/usr/ports/net/ntop/work/ntop'brgmake: *** [all] Error 2br*** Error code 2brbrStop in /usr/ports/net/ntop.brbrbrIt must be a BUG in the ntop port.brbrThe problem is in the XML plugin. If you don't need that, ntop will build brproperly without the XML plugin.brbr-Glennbrbrbrgreetingsbrpiotrbrbr ___ Join Excite! - http://www.excite.com The most personalized portal on the Web! ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: cannot install ntop under freeBSD 5.5
thanks, but now I get rrd disaster: rm -f .libs/rrdPlugin.lo cc -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I/usr/local/include -I/usr/include -I../myrrd -DFREEBSD -I/usr/local/include -I/usr/include -I/usr/local/include -I/usr/local/include -I/usr/local/include -I/usr/include -I/usr/include -g -O -pipe -I/usr/local/include -g -Wshadow -Wpointer-arith -Wmissing-prototypes -Wmissing-declarations -Wnested-externs -fPIC -MT rrdPlugin.lo -MD -MP -MF .deps/rrdPlugin.Tpo -c rrdPlugin.c -fPIC -DPIC -o .libs/rrdPlugin.lo rrdPlugin.c: In function `graphCounter': rrdPlugin.c:583: error: too few arguments to function `rrd_graph' rrdPlugin.c: In function `netflowSummary': rrdPlugin.c:728: error: too few arguments to function `rrd_graph' rrdPlugin.c: In function `graphSummary': rrdPlugin.c:926: error: too few arguments to function `rrd_graph' gmake[3]: *** [rrdPlugin.lo] Error 1 gmake[3]: Leaving directory `/usr/ports/net/ntop/work/ntop/plugins' gmake[2]: *** [all-recursive] Error 1 gmake[2]: Leaving directory `/usr/ports/net/ntop/work/ntop/plugins' gmake[1]: *** [all-recursive] Error 1 gmake[1]: Leaving directory `/usr/ports/net/ntop/work/ntop' gmake: *** [all] Error 2 *** Error code 2 Stop in /usr/ports/net/ntop. *** Error code 1 I cannot use both at the same time: make rmconfig in /usr/ports/net/ntop and this patch in /usr/ports/net/ntop/files to correct rrd: --- ntop.h.orig Tue Jul 26 03:39:16 2005 +++ ntop.h Tue Jul 26 03:39:29 2005 @@ -447,7 +447,7 @@ #endif #ifndef EMBEDDED -#include rrd.h +#include myrrd/rrd.h #endif #ifdef HAVE_GETOPT_H this patch should solve rrdPlugin disaster. greetings piotr --- On Wed 07/27, Glenn Dawson [EMAIL PROTECTED] wrote: From: Glenn Dawson [mailto: [EMAIL PROTECTED] To: [EMAIL PROTECTED] Date: Wed, 27 Jul 2005 05:39:36 -0700 Subject: Re: cannot install ntop under freeBSD 5.5 At 04:36 AM 7/27/2005, you wrote:brbrand howto build ntop without XML plugin ?brbrJust do make rmconfig in /usr/ports/net/ntopbrbrThen when you do make install clean it should prompt you with a menu of broptional components. XML should be turned off by default, so if you just braccept the defaults, it should build without error.brbr-Glennbrbrbrbrbrbr --- On Mon 07/25, Glenn Dawson [EMAIL PROTECTED] wrote:brFrom: Glenn Dawson [mailto: [EMAIL PROTECTED]brTo: [EMAIL PROTECTED], freebsd-questions@freebsd.orgbr Cc: [EMAIL PROTECTED]brDate: Mon, 25 Jul 2005 17:34:13 -0700brSubject: Re: cannot install ntop under freeBSD 5.5brbrAt 12:17 PM 7/25/2005, PK wrote:brbrhibrbrI did what you brsuggested.brI've deinstalled rrdtool completely, tried install ntop but brnow I get brfollowing horrible brerrors:brbrbrxmldumpPlugin.c:36:2: warning: br#warningbrxmldumpPlugin.c:37:2: warning: #warning brbr===brxmldumpPlugin.c:38:2: brwarning: #warningbrxmldumpPlugin.c:39:2: warning: #warning The include brof gdome.h that brfollows will generate a lot brofbrxmldumpPlugin.c:40:2: warning: #warning compile warnings about br'shadows a brglobal declaration'.brxmldumpPlugin.c:41:2: warning: br#warning Unfortunately, it's the way this brcrud is coded and brcan'tbrxmldumpPlugin.c:42:2: warning: #warning be fixed. Just ignore brthem!brxmldumpPlugin.c:43:2: warning: br#warningbrbr[snip]brbrbrIn file included from brxmldumpPlugin.c:1730:brxml_g_intf.inc: In function br`dumpXML_interfaces':brxml_g_intf.inc:33: warning: nestedbrextern declaration of `BufferTooShort'brgmake[3]: *** br[xmldumpPlugin.lo] Error 1brgmake[3]: Leaving directory br`/usr/ports/net/ntop/work/ntop/plugins'brgmake[2]: *** [all-recursive] brError 1brgmake[2]: Leaving directory br`/usr/ports/net/ntop/work/ntop/plugins'brgmake[1]: *** [all-recursive] brError 1brgmake[1]: Leaving directory br`/usr/ports/net/ntop/work/ntop'brgmake: *** [all] Error 2br*** Error brcode 2brbrStop in /usr/ports/net/ntop.brbrbrIt must be a brBUG in the ntop port.brbrThe problem is in the XML plugin. If you brdon't need that, ntop will build brproperly without the XML brplugin.brbr-Glennbrbrbrgreetingsbrpiotrbrbrbrbr___brJoin Excite! - http://www.excite.combrThe most personalized portal on the Web!brbr---brbrWe've checked and double checked, it keeps coming up the same thing.brThe message is Mars needs women. brbr ___ Join Excite! - http://www.excite.com The most personalized portal on the Web! ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: cannot install ntop under freeBSD 5.5
], [EMAIL PROTECTED], [EMAIL PROTECTED] Cc: freebsd-questions@freebsd.org Date: Mon, 25 Jul 2005 05:54:26 -0700 Subject: Re: cannot install ntop under freeBSD 5.5 At 05:03 AM 7/25/2005, PK wrote:brbrhibrbrIt must be a BUG in the freeBSD 5.4 ntop port !brbrgreetingsbrPiotrbrbrThe problem you are seeing is because the rrd plugin that's part of ntop is brsupplying 5 argument to the rrd_graph() function. Which is ok for the brversions of rrd that are bundled with ntop.brbrHowever, if you have the rrdtools port installed, it's version of brrrd_graph() is expecting 8 arguments. The error you are getting is because brthe prototype for rrd_graph() that comes with rrdtools does not match how brntop is calling it.brbrTo get around the problem, you can remove the rrdtool port, and then ntop brshould build without errors. If you're using rrdtool you can probably brreinstall it once ntop is built. That may cause a problem if rrdtool brinstalls any shared libraries that ntop uses.brbr-Glennbrbrbrbrbrbr --- On Mon 07/25, Giorgos Keramidas [EMAIL PROTECTED] wrote:brFrom: Giorgos Keramidas [mailto: [EMAIL PROTECTED]brTo: [EMAIL PROTECTED]br Cc: freebsd-questions@freebsd.orgbrDate: Mon, 25 Jul 2005 13:20:05 +0300brSubject: Re: cannot install ntop under freeBSD 5.5brbrOn 2005-07-24 20:14, PK [EMAIL PROTECTED] wrote:brbr brhibrbr I have exact the same problem and get the same brerrors.brbr to clean a port, reinstall or upgrade ntop or rrdtool brdoesn't help.brbrStrange. I did build ntop on 6.0-CURRENT a few days brbefore the switchbrto 7.0-CURRENT was made. I haven't tried to build brntop on 5.X though,brso this may be the problem.brbrbrbr___brJoin Excite! - http://www.excite.combrThe most personalized portal on the Web!brbrbr___brfreebsd-questions@freebsd.org mailing listbrhttp://lists.freebsd.org/mailman/listinfo/freebsd-questionsbrTo unsubscribe, send any mail to [EMAIL PROTECTED]brbr ___ Join Excite! - http://www.excite.com The most personalized portal on the Web! ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: cannot install ntop under freeBSD 5.5
hi It must be a BUG in the freeBSD 5.4 ntop port ! greetings Piotr --- On Mon 07/25, Giorgos Keramidas [EMAIL PROTECTED] wrote: From: Giorgos Keramidas [mailto: [EMAIL PROTECTED] To: [EMAIL PROTECTED] Cc: freebsd-questions@freebsd.org Date: Mon, 25 Jul 2005 13:20:05 +0300 Subject: Re: cannot install ntop under freeBSD 5.5 On 2005-07-24 20:14, PK [EMAIL PROTECTED] wrote:brbr hibrbr I have exact the same problem and get the same errors.brbr to clean a port, reinstall or upgrade ntop or rrdtool doesn't help.brbrStrange. I did build ntop on 6.0-CURRENT a few days before the switchbrto 7.0-CURRENT was made. I haven't tried to build ntop on 5.X though,brso this may be the problem.brbr ___ Join Excite! - http://www.excite.com The most personalized portal on the Web! ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: cannot install ntop under freeBSD 5.5
] Cc: freebsd-questions@freebsd.org Date: Mon, 25 Jul 2005 05:54:26 -0700 Subject: Re: cannot install ntop under freeBSD 5.5 At 05:03 AM 7/25/2005, PK wrote:brbrhibrbrIt must be a BUG in the freeBSD 5.4 ntop port !brbrgreetingsbrPiotrbrbrThe problem you are seeing is because the rrd plugin that's part of ntop is brsupplying 5 argument to the rrd_graph() function. Which is ok for the brversions of rrd that are bundled with ntop.brbrHowever, if you have the rrdtools port installed, it's version of brrrd_graph() is expecting 8 arguments. The error you are getting is because brthe prototype for rrd_graph() that comes with rrdtools does not match how brntop is calling it.brbrTo get around the problem, you can remove the rrdtool port, and then ntop brshould build without errors. If you're using rrdtool you can probably brreinstall it once ntop is built. That may cause a problem if rrdtool brinstalls any shared libraries that ntop uses.brbr-Glennbrbrbrbrbrbr --- On Mon 07/25, Giorgos Keramidas [EMAIL PROTECTED] wrote:brFrom: Giorgos Keramidas [mailto: [EMAIL PROTECTED]brTo: [EMAIL PROTECTED]br Cc: freebsd-questions@freebsd.orgbrDate: Mon, 25 Jul 2005 13:20:05 +0300brSubject: Re: cannot install ntop under freeBSD 5.5brbrOn 2005-07-24 20:14, PK [EMAIL PROTECTED] wrote:brbr brhibrbr I have exact the same problem and get the same brerrors.brbr to clean a port, reinstall or upgrade ntop or rrdtool brdoesn't help.brbrStrange. I did build ntop on 6.0-CURRENT a few days brbefore the switchbrto 7.0-CURRENT was made. I haven't tried to build brntop on 5.X though,brso this may be the problem.brbrbrbr___brJoin Excite! - http://www.excite.combrThe most personalized portal on the Web!brbrbr___brfreebsd-questions@freebsd.org mailing listbrhttp://lists.freebsd.org/mailman/listinfo/freebsd-questionsbrTo unsubscribe, send any mail to [EMAIL PROTECTED]brbr ___ Join Excite! - http://www.excite.com The most personalized portal on the Web! ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
howto export kde from freeBSD 5.4 ?
hi howto allow kde export from freeBSD 5.4 ? I mean to load KDE, for example with X-Win32 http://www.xwin32.com/en/products/ on the windows machine ? kind regards piotr ___ Join Excite! - http://www.excite.com The most personalized portal on the Web! ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: howto export kde from freeBSD 5.4 ?
yes, I know VNC but VNC create all the time a new KDE session and I'd like to export already running KDE session. --- On Sun 07/24, Robert Slade [EMAIL PROTECTED] wrote: From: Robert Slade [mailto: [EMAIL PROTECTED] To: freebsd-questions@freebsd.org Date: Sun, 24 Jul 2005 13:41:16 + Subject: Re: howto export kde from freeBSD 5.4 ? On Sun, 2005-07-24 at 13:30, PK wrote:br hibr br howto allow kde export from freeBSD 5.4 ?br br I mean to load KDE, for example with X-Win32br br http://www.xwin32.com/en/products/br br on the windows machine ?br br kind regardsbr piotrbr br brbrYou are probably better off with VNC. Freebsd has a VNC Server in thebrports and there are several free vnc clients for windows. brbrRobbrbr___brfreebsd-questions@freebsd.org mailing listbrhttp://lists.freebsd.org/mailman/listinfo/freebsd-questionsbrTo unsubscribe, send any mail to [EMAIL PROTECTED]br ___ Join Excite! - http://www.excite.com The most personalized portal on the Web! ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: cannot install ntop under freeBSD 5.5
hi I have exact the same problem and get the same errors. to clean a port, reinstall or upgrade ntop or rrdtool doesn't help. I've done: portupgrade -a -N -vu -R net/ntop and portupgrade -a -N -vu -r net/ntop did ports tree update again but still get errors ! on other hardware with fresh installation, I get the same errors. this is a horrible port BUG ! kind regards piotr --- On Sat 07/23, PK [EMAIL PROTECTED] wrote: From: PK [mailto: [EMAIL PROTECTED] To: [EMAIL PROTECTED] Cc: freebsd-questions@freebsd.org Date: Sat, 23 Jul 2005 12:24:52 -0400 (EDT) Subject: Re: cannot install ntop under freeBSD 5.5 brthanksbrbrI've done:brbrportupgrade -a -N -vu -R net/ntopbrbrand was running more then 4 days !brI've got following outputs:br--- Upgrade of multimedia/kdemultimedia3 ended at: Sat, 23 Jul 2005 18:03:03 +0200 (consumed 04:15:30)br--- Skipping 'x11/kde3' (kde-3.4.0) because a requisite package 'kdepim-3.4.0' (deskutils/kdepim3) failed (specify -k to force)br--- Listing the results (+:done / -:ignored / *:skipped / !:failed)br- audio/artswrapper (artswrapper-1.2.1_1)br - misc/compat4x (compat4x-i386-5.3_2)br- security/cyrus-sasl2 (cyrus-sasl-2.1.21)br- databases/db4 (db4-4.0.14_1,1)br- net/sniffit (sniffit-0.3.7b_2)br- lang/python (python-2.4.1_1)br - archivers/zip (zip-2.3_2)br- misc/kdehier (kdehier-1.0_6)br - benchmarks/ttcp (ttcp-1.12)br- lang/perl5.8 (perl-5.8.7)br - net/rsync (rsync-2.6.5)br- devel/libtool15 (libtool-1.5.18)br - graphics/jpeg (jpeg-6b_3)br- graphics/png (png-1.2.8_2)br - www/tidy (tidy-2804_2)br- databases/mysql41-client (mysql-client-4.1.12)br- archivers/unzip (unzip-5.52_1)br- java/javavmwrapper (javavmwrapper-2.0_5)br- textproc/expat2 (expat-1.95.8_3)br- lang/ruby18 (ruby-1.8.2_4)br- devel/cgilib (cgilib-0.5)br- security/p5-Authen-PAM (p5-Authen-PAM-0.14)br- misc/bsdiff (bsdiff-4.2)br- databases/ruby-bdb (ruby18-bdb4-0.5.3)br- sysutils/freebsd-sha256 (freebsd-sha256-20050310)br- net/openslp (openslp-1.2.1_1)br - devel/boost-python (boost-python-1.32.0_2)br- converters/libiconv (libiconv-1.9.2_1)br- print/gsfonts (gsfonts-8.11_2)br- databases/db42 (db42-4.2.52_4)br- security/p5-Net-SSLeay (p5-Net-SSLeay-1.25)br- sysutils/webmin (webmin-1.210_2)br- databases/ruby-bdb1 (ruby18-bdb1-0.2.2)br- security/freebsd-update (freebsd-update-1.6_1)br- print/libpaper (libpaper-1.1.14.3)br - devel/pcre (pcre-5.0)br- www/neon (neon-0.24.7)br- devel/m4 (m4-1.4.3)br- textproc/man2html (man2html-3.0.1_1)br - graphics/tiff (tiff-3.7.3)br- devel/autoconf213 (autoconf-2.13.000227_5)br- graphics/lcms (lcms-1.14,1)br- devel/libgnugetopt (libgnugetopt-1.2)br- mail/postfix (postfix-2.2.4_1,1)br- net/openldap22-client (openldap-client-2.2.27)br- sysutils/portupgrade (portupgrade-20041226_5)br- graphics/libmng (libmng-1.0.8)br - net/cvsup-without-gui (cvsup-without-gui-16.1h_2)br- palm/pilot-link (pilot-link-0.11.8_3)br- audio/libogg (libogg-1.1.2_1,3)br- audio/speex (speex-1.0.5,1)br- devel/imake-6 (imake-6.8.2)br- textproc/p5-XML-Parser (p5-XML-Parser-2.34_1)br - x11/xorg-documents (xorg-documents-6.8.2)br- devel/libusb (libusb-0.1.10a)br- audio/flac (flac-1.1.2)br- devel/automake14 (automake-1.4.6_2)br- security/nmap (nmap-3.81)br - graphics/jasper (jasper-1.701.0)br- devel/gettext (gettext-0.14.5)br- devel/popt (popt-1.7)br- devel/bison (bison-1.75_2)br- security/libgpg-error (libgpg-error-1.0_1)br + security/libgcrypt (libgcrypt-1.2.1)br- shells/bash (bash-3.0.16_1)br- net/libpcap (libpcap-0.8.3)br- audio/libvorbis (libvorbis-1.1.1,3)br- multimedia/libtheora (libtheora-1.0.a4)br- devel/gmake (gmake-3.80_2)br- textproc/intltool (intltool-0.33)br- net/mDNSResponder (mDNSResponder-107.1_1)br- devel/autoconf259 (autoconf-2.59_2)br - net/samba-libsmbclient (samba-libsmbclient-3.0.14a_2)br- devel/automake19 (automake-1.9.5)br- audio/portaudio (portaudio-18.1_2)br- sysutils/logrotate (logrotate-3.7_4)br- www/apache2 (apache-2.0.54)br- lang/php4 (php4-4.4.0)br- textproc/php4-xml (php4-xml-4.4.0)br - databases/php4-mysql (php4-mysql-4.4.0)br- audio/cdparanoia (cdparanoia-3.9.8_7)br- devel/pkgconfig (pkgconfig-0.17.2)br + devel/libidn (libidn-0.5.15)br- devel/libstatgrab (libstatgrab-0.11.1)br- math/fftw3 (fftw3-3.0.1_4)br- security/gnutls (gnutls-1.0.24_1)br
Re: cannot install ntop under freeBSD 5.5
) * misc/kdeutils3 (kdeutils-3.4.0) + sysutils/kdeadmin3 (kdeadmin-3.4.0) + www/kdewebdev (kdewebdev-3.4.0,2) + misc/kdeedu3 (kdeedu-3.4.0_1) * devel/kdevelop (kdevelop-3.2.0) + audio/akode (kdemultimedia-akode-3.4.0) + multimedia/kdemultimedia3 (kdemultimedia-3.4.0) * x11/kde3 (kde-3.4.0) --- Packages processed: 26 done, 177 ignored, 6 skipped and 4 failed --- Session ended at: Sat, 23 Jul 2005 18:03:26 +0200 (consumed 15:38:19) now I'ww try: portupgrade -a -N -vu -r net/ntop and hope will be quicker ! greetings piotr --- On Wed 07/20, Giorgos Keramidas [EMAIL PROTECTED] wrote: From: Giorgos Keramidas [mailto: [EMAIL PROTECTED] To: [EMAIL PROTECTED] Cc: freebsd-questions@freebsd.org Date: Thu, 21 Jul 2005 02:46:30 +0300 Subject: Re: cannot install ntop under freeBSD 5.5 On 2005-07-20 19:10, PK [EMAIL PROTECTED] wrote:brbr hibrbr did you install ntop on your freeBSD 5.4 without any errors ?brbr under freeBSD 5.2.1 on the same hardware I didn't have any problems with ntop installation.brbr I have cleand ntop rrdtool ports, reinstalled again, but still get this errors:brbr MP -MF .deps/rrdPlugin.Tpo -c rrdPlugin.c -fPIC -DPIC -o .libs/rrdPlugin.lobr rrdPlugin.c: In function `graphCounter':br rrdPlugin.c:583: error: too few arguments to function `rrd_graph'br rrdPlugin.c: In function `netflowSummary':br rrdPlugin.c:728: error: too few arguments to function `rrd_graph'br rrdPlugin.c: In function `graphSummary':br rrdPlugin.c:926: error: too few arguments to function `rrd_graph'br gmake[3]: *** [rrdPlugin.lo] Error 1br gmake[3]: Leaving directory `/usr/ports/net/ntop/work/ntop/plugins'br gmake[2]: *** [all-recursive] Error 1br gmake[2]: Leaving directory `/usr/ports/net/ntop/work/ntop/plugins'br gmake[1]: *** [all-recursive] Error 1br gmake[1]: Leaving directory `/usr/ports/net/ntop/work/ntop'br gmake: *** [all] Error 2br *** Error code 2brbr Stop in /usr/ports/net/ntop.br ** Command failed [exit code 1]: /usr/bin/script -qa /tmp/portupgrade26423.0 makebr ** Fix the problem and try again.br ** Listing the failed packages (*:skipped / !:failed)br ! net/ntop (ntop-3.1_1) (compiler error)br --- Packages processed: 0 done, 0 ignored, 0 skipped and 1 failedbrbrAre you sure you have an up to date ports tree and there are no stalebrwork directories in it?brbrHave you installed the latest version of rrdtool?brbrApparently, you are using portupgrade. Try updating both thebrdependencies of ntop and the packages that depend on ntop:brbr# portupgrade -a -N -vu -R net/ntopbr # portupgrade -a -N -vu -r net/ntopbrbr ___ Join Excite! - http://www.excite.com The most personalized portal on the Web! ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
cannot install p5-Apache-SubProcess on freeBSD 5.4
hi I cannot install p5-Apache-SubProcess on freeBSD 5.4 due to following errors: # cd /usr/ports/www/p5-Apache-SubProcess # make install clean . . . mod_perl.c:235: error: `array_header' undeclared (first use in this function) mod_perl.c:235: error: (Each undeclared identifier is reported only once mod_perl.c:235: error: for each function it appears in.) mod_perl.c:235: error: `vars' undeclared (first use in this function) mod_perl.c:235: error: syntax error before ')' token mod_perl.c:242: error: structure has no member named `vars' mod_perl.c:243: error: structure has no member named `vars' mod_perl.c: At top level: mod_perl.c:256: error: syntax error before pool mod_perl.c:305: error: syntax error before pool mod_perl.c: In function `mp_fake_request_rec': mod_perl.c:307: error: `p' undeclared (first use in this function) mod_perl.c:309: error: `s' undeclared (first use in this function) mod_perl.c:311: error: `hook' undeclared (first use in this function) mod_perl.c: At top level: mod_perl.c:317: error: syntax error before pool mod_perl.c: In function `perl_restart_handler': mod_perl.c:321: error: `s' undeclared (first use in this function) mod_perl.c:322: error: `p' undeclared (first use in this function) mod_perl.c: At top level: mod_perl.c:327: error: syntax error before pool mod_perl.c: In function `perl_restart': mod_perl.c:357: error: `s' undeclared (first use in this function) mod_perl.c:357: error: `p' undeclared (first use in this function) mod_perl.c: At top level: mod_perl.c:420: error: syntax error before '*' token mod_perl.c:420: error: syntax error before '*' token mod_perl.c: In function `xs_dl_librefs': mod_perl.c:425: error: `array_header' undeclared (first use in this function) mod_perl.c:425: error: `arr' undeclared (first use in this function) mod_perl.c:434: error: `p' undeclared (first use in this function) mod_perl.c:447: warning: cast to pointer from integer of different size mod_perl.c: At top level: mod_perl.c:462: error: syntax error before '*' token mod_perl.c: In function `unload_xs_so': mod_perl.c:466: error: `librefs' undeclared (first use in this function) mod_perl.c: In function `mp_dso_unload': mod_perl.c:485: error: `array_header' undeclared (first use in this function) mod_perl.c:485: error: `librefs' undeclared (first use in this function) mod_perl.c:487: error: `pool' undeclared (first use in this function) mod_perl.c:487: error: syntax error before ')' token mod_perl.c: At top level: mod_perl.c:554: error: syntax error before pool mod_perl.c: In function `perl_module_init': mod_perl.c:557: warning: passing arg 1 of `ap_add_version_component' from incompatible pointer type mod_perl.c:557: error: too few arguments to function `ap_add_version_component' mod_perl.c:565: warning: passing arg 1 of `ap_add_version_component' from incompatible pointer type mod_perl.c:565: error: too few arguments to function `ap_add_version_component' mod_perl.c:569: error: `s' undeclared (first use in this function) mod_perl.c:569: error: `p' undeclared (first use in this function) mod_perl.c: At top level: mod_perl.c:594: error: syntax error before pool mod_perl.c: In function `perl_startup': mod_perl.c:599: error: `s' undeclared (first use in this function) mod_perl.c:604: error: `server_argv0' undeclared (first use in this function) mod_perl.c:642: error: `p' undeclared (first use in this function) mod_perl.c:781: warning: passing arg 1 of `Perl_newSVpv' makes pointer from integer without a cast mod_perl.c:782: warning: passing arg 1 of `Perl_newSVpv' makes pointer from integer without a cast mod_perl.c:795: error: structure has no member named `PerlRequire' mod_perl.c:796: error: structure has no member named `PerlRequire' mod_perl.c:804: error: structure has no member named `PerlModule' mod_perl.c:805: error: structure has no member named `PerlModule' mod_perl.c:826: error: `null_cleanup' undeclared (first use in this function) mod_perl.c: At top level: mod_perl.c:927: error: syntax error before pool mod_perl.c: In function `perl_child_exit_cleanup': mod_perl.c:933: error: structure has no member named `pool' mod_perl.c: At top level: mod_perl.c:936: error: syntax error before pool mod_perl.c: In function `perl_child_init': mod_perl.c:940: error: `s' undeclared (first use in this function) mod_perl.c:941: error: `p' undeclared (first use in this function) mod_perl.c:946: error: structure has no member named `pool' mod_perl.c:947: error: `null_cleanup' undeclared (first use in this function) mod_perl.c: At top level: mod_perl.c:956: error: syntax error before pool mod_perl.c: In function `perl_child_exit': mod_perl.c:960: error: `s' undeclared (first use in this function) mod_perl.c:961: error: `p' undeclared (first use in this
Re: cannot install ntop under freeBSD 5.5
hi did you install ntop on your freeBSD 5.4 without any errors ? under freeBSD 5.2.1 on the same hardware I didn't have any problems with ntop installation. I have cleand ntop rrdtool ports, reinstalled again, but still get this errors: MP -MF .deps/rrdPlugin.Tpo -c rrdPlugin.c -fPIC -DPIC -o .libs/rrdPlugin.lo rrdPlugin.c: In function `graphCounter': rrdPlugin.c:583: error: too few arguments to function `rrd_graph' rrdPlugin.c: In function `netflowSummary': rrdPlugin.c:728: error: too few arguments to function `rrd_graph' rrdPlugin.c: In function `graphSummary': rrdPlugin.c:926: error: too few arguments to function `rrd_graph' gmake[3]: *** [rrdPlugin.lo] Error 1 gmake[3]: Leaving directory `/usr/ports/net/ntop/work/ntop/plugins' gmake[2]: *** [all-recursive] Error 1 gmake[2]: Leaving directory `/usr/ports/net/ntop/work/ntop/plugins' gmake[1]: *** [all-recursive] Error 1 gmake[1]: Leaving directory `/usr/ports/net/ntop/work/ntop' gmake: *** [all] Error 2 *** Error code 2 Stop in /usr/ports/net/ntop. ** Command failed [exit code 1]: /usr/bin/script -qa /tmp/portupgrade26423.0 make ** Fix the problem and try again. ** Listing the failed packages (*:skipped / !:failed) ! net/ntop (ntop-3.1_1) (compiler error) --- Packages processed: 0 done, 0 ignored, 0 skipped and 1 failed --- On Wed 07/20, Lowell Gilbert [EMAIL PROTECTED] wrote: From: Lowell Gilbert [mailto: [EMAIL PROTECTED] To: [EMAIL PROTECTED], freebsd-questions@freebsd.org Date: 20 Jul 2005 16:32:37 -0400 Subject: Re: cannot install ntop under freeBSD 5.5 PK [EMAIL PROTECTED] writes:brbr sorry I mean freeBSD 5.4 br br I have the newest ports tree update and I've cleaned the ntop port directory before building.br br It still doesn't work and I get the same errors.brbrWell, whatever wrong is particular to your machine, because no onebrelse has seen this problem. If you want to try to figure out what,bryou can start with the advice I gave in my earlier message, aboutbranalyzing the compiler error.br ___ Join Excite! - http://www.excite.com The most personalized portal on the Web! ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: cannot install ntop under freeBSD 5.5
sorry I mean freeBSD 5.4 I have the newest ports tree update and I've cleaned the ntop port directory before building. It still doesn't work and I get the same errors. kind regards piotr --- On Tue 07/19, Lowell Gilbert [EMAIL PROTECTED] wrote: From: Lowell Gilbert [mailto: [EMAIL PROTECTED] To: [EMAIL PROTECTED], freebsd-questions@freebsd.org Date: 19 Jul 2005 12:41:19 -0400 Subject: Re: cannot install ntop under freeBSD 5.5 PK [EMAIL PROTECTED] writes:brbr If I try to install ntop from ports, I get following errors:br br rrdPlugin.c: In function `graphCounter':br rrdPlugin.c:583: error: too few arguments to function `rrd_graph'br rrdPlugin.c: In function `netflowSummary':br rrdPlugin.c:728: error: too few arguments to function `rrd_graph'br rrdPlugin.c: In function `graphSummary':br rrdPlugin.c:926: error: too few arguments to function `rrd_graph'br gmake[3]: *** [rrdPlugin.lo] Error 1br gmake[3]: Leaving directory `/usr/ports/net/ntop/work/ntop/plugins'br gmake[2]: *** [all-recursive] Error 1br gmake[2]: Leaving directory `/usr/ports/net/ntop/work/ntop/plugins'br gmake[1]: *** [all-recursive] Error 1br gmake[1]: Leaving directory `/usr/ports/net/ntop/work/ntop'br gmake: *** [all] Error 2br *** Error code 2br br Stop in /usr/ports/net/ntop.br *** Error code 1br br Stop in /usr/ports/net/ntop.br br knows someone, howto solve this problem ?br I have the newest ports tree update and rrdtool is already updatet.brbrThere is no FreeBSD 5.5 yet, so I'm not sure what you have.brDid you clean your ntop port directory before building?brbrrrd_graph is supposed to take 5 parameters (I updated my ports treebrthis morning). Make sure it does so in that file and in rrd.h.br ___ Join Excite! - http://www.excite.com The most personalized portal on the Web! ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
cannot install ntop under freeBSD 5.5
hi If I try to install ntop from ports, I get following errors: rrdPlugin.c: In function `graphCounter': rrdPlugin.c:583: error: too few arguments to function `rrd_graph' rrdPlugin.c: In function `netflowSummary': rrdPlugin.c:728: error: too few arguments to function `rrd_graph' rrdPlugin.c: In function `graphSummary': rrdPlugin.c:926: error: too few arguments to function `rrd_graph' gmake[3]: *** [rrdPlugin.lo] Error 1 gmake[3]: Leaving directory `/usr/ports/net/ntop/work/ntop/plugins' gmake[2]: *** [all-recursive] Error 1 gmake[2]: Leaving directory `/usr/ports/net/ntop/work/ntop/plugins' gmake[1]: *** [all-recursive] Error 1 gmake[1]: Leaving directory `/usr/ports/net/ntop/work/ntop' gmake: *** [all] Error 2 *** Error code 2 Stop in /usr/ports/net/ntop. *** Error code 1 Stop in /usr/ports/net/ntop. knows someone, howto solve this problem ? I have the newest ports tree update and rrdtool is already updatet. greetings piotr ___ Join Excite! - http://www.excite.com The most personalized portal on the Web! ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
ERROR in man2html under freeBSD 5.4
hi I've installed man2html on freeBSD 5.4 with newest ports tree update: # cd /usr/ports/textproc/man2html # make install clean Installing programs to /usr/local/bin: man2html = /usr/local/bin/man2html Installing manpages to /usr/local/man: doc/man2html.1 = /usr/local/man/man1/man2html.1 if [ -d /usr/local/www/cgi-bin ] ; then install -o root -g wheel -m 555 /usr/ports/textproc/man2html/work/man2html3.0.1/man.cgi /usr/local/www/cgi-bin ; fi === Compressing manual pages for man2html-3.0.1_1 === Registering installation for man2html-3.0.1_1 === Cleaning for perl-5.8.7 === Cleaning for man2html-3.0.1_1 but if I try to connect via browser: [url]http://192.168.0.3/cgi-bin/man.cgi[/url] then, I get Internal Server Error If I try to start from command line, I get following error: # cd /usr/local/www/cgi-bin # perl man.cgi Content-type: text/html Manpage Viewer Error CGI input error: Unrecgonized request method : Manpage viewer available with the man2html package. greetings piotr ___ Join Excite! - http://www.excite.com The most personalized portal on the Web! ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
freecolor won't start because of BUS ERROR
hi I have a fresh installation of freeBSD 5.4 and did ports tree update. I've installed freecolor from ports, but won't start: # /usr/local/bin/freecolor -o Bus error ___ Join Excite! - http://www.excite.com The most personalized portal on the Web! ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
FW: Re: BUS ERROR from freecolor
hi I have Compaq Deskpro 4000, Processor Celeron 400MHz # sysctl hw hw.machine: i386 hw.model: Pentium II/Pentium II Xeon/Celeron hw.ncpu: 1 hw.byteorder: 1234 hw.physmem: 527929344 hw.usermem: 424464384 hw.pagesize: 4096 hw.floatingpoint: 1 hw.machine_arch: i386 hw.realmem: 536870912 hw.aac.iosize_max: 65536 hw.an.an_dump: off hw.an.an_cache_mode: dbm hw.an.an_cache_mcastonly: 0 hw.an.an_cache_iponly: 1 hw.ata.ata_dma: 1 hw.ata.wc: 1 hw.ata.atapi_dma: 0 hw.cardbus.debug: 0 hw.cardbus.cis_debug: 0 hw.cs.debug: 0 hw.cs.ignore_checksum_failure: 0 hw.cs.recv_delay: 570 hw.firewire.try_bmr: 1 hw.firewire.hold_count: 3 hw.firewire.fwmem.eui64_hi: 0 hw.firewire.fwmem.eui64_lo: 0 hw.firewire.fwmem.speed: 2 hw.firewire.fwe.stream_ch: 1 hw.firewire.fwe.tx_speed: 2 hw.firewire.fwe.rx_queue_len: 128 hw.firewire.sbp.auto_login: 1 hw.firewire.sbp.max_speed: -1 hw.firewire.sbp.exclusive_login: 1 hw.firewire.sbp.login_delay: 1000 hw.firewire.sbp.scan_delay: 500 hw.firewire.sbp.use_doorbell: 0 hw.firewire.sbp.tags: 0 hw.pccard.debug: 0 hw.pccard.cis_debug: 0 hw.cbb.start_memory: 2281701376 hw.cbb.start_16_io: 256 hw.cbb.start_32_io: 4096 hw.cbb.debug: 0 hw.pcic.intr_mask: 57016 hw.pci.enable_io_modes: 1 hw.pci.do_powerstate: 0 hw.pci.host_mem_start: 2147483648 hw.pci.irq_override_mask: 57080 hw.wi.txerate: 0 hw.wi.debug: 0 hw.xe.debug: 0 hw.intr_storm_threshold: 500 hw.availpages: 128889 hw.bus.devctl_disable: 0 hw.dc_quick: 1 hw.ste.rxsyncs: 0 hw.kbd.keymap_restrict_change: 0 hw.syscons.saver.keybonly: 1 hw.syscons.bell: 1 hw.syscons.sc_no_suspend_vtswitch: 0 hw.busdma.total_bpages: 33 hw.busdma.zone0.total_bpages: 1 hw.busdma.zone0.free_bpages: 1 hw.busdma.zone0.reserved_bpages: 0 hw.busdma.zone0.active_bpages: 0 hw.busdma.zone0.total_bounced: 0 hw.busdma.zone0.total_deferred: 0 hw.busdma.zone0.lowaddr: 0x hw.busdma.zone0.alignment: 4096 hw.busdma.zone0.boundary: 0 hw.busdma.zone1.total_bpages: 32 hw.busdma.zone1.free_bpages: 32 hw.busdma.zone1.reserved_bpages: 0 hw.busdma.zone1.active_bpages: 0 hw.busdma.zone1.total_bounced: 0 hw.busdma.zone1.total_deferred: 0 hw.busdma.zone1.lowaddr: 0x hw.busdma.zone1.alignment: 2 hw.busdma.zone1.boundary: 65536 hw.clockrate: 399 hw.instruction_sse: 0 hw.em0.debug_info: -1 hw.em0.stats: -1 hw.em0.rx_int_delay: 0 hw.em0.tx_int_delay: 66 hw.em0.rx_abs_int_delay: 66 hw.em0.tx_abs_int_delay: 66 greetings piotr ___ Join Excite! - http://www.excite.com The most personalized portal on the Web! ---BeginMessage--- On Thu, 2005-07-14 at 16:26 +0200, Simon Barner wrote: PK wrote: I have freeBSD 5.4 and newest ports tree update. I've installed freecolor from ports without errors, but if I try to start it, I get following error: Works fine here. Please report this to freecolor's maintainer (see the Makefile). This might be a 64bit issue, so tell him what platform you are seeing this error on. He already has :) It works for me also, and I even gave him a pre-compiled package that was known to work on my system. I hadn't thought about the 64 bit issue - PK, what platform are you running this on? That said - it works on my sparc64... Cheers, Tim. -- Tim Bishop http://www.bishnet.net/tim/ PGP Key: 0x5AE7D984 ---End Message--- ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
