RE: Problem Installing FreeBSD 6.0, asking for help

2006-03-12 Thread ehrhard . herbst
> I believe you are saying that 5.2 is currently installed on
> the hard drive and you want to do a fresh install from scratch of
> 6.0.
>
> You have to change the pc bios setup to boot from the cd drive
> instead of from the hard drive.
> The pc will then boot from the 6.0 cd and install 6.0 destroying the
> 5.2 system on the hard drive along with any user data you had. After
> 6.0 is installed you have to change the bios back to booting from
> the hard drive.
>
> Be sure you have a backup of any user data on the 5.2 system you
> want saved.
>
> -Original Message-
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] Behalf Of
> [EMAIL PROTECTED]
> Sent: Saturday, March 11, 2006 5:44 PM
> To: [EMAIL PROTECTED]
> Subject: Problem Installing FreeBSD 6.0, asking for help
>
>
> Hello,
>
> may I ask you for help with the following Problem:
> When I try to install FreeBsd6.0, there is the following error
> during the
> boot process (because the system is not able to boot from CD, I have
> to boot
> from floppy) occurs:
> ahc0: probe1:ahc0:0:1:0: SCB 6: immediate reset Flags 0x620
> ahc0: probe1:ahc0:0:1:0: No longer in timeout, status=25b
> ahc0: Issued channel A bus reset, SCBs 6 aborted.
> ...
> ...
> ...
>
> There are variants of the messages with different SCB, flags and
> status.
>
> As a result, the install program does not find any disk.
> FreeBSD5.2 is running and dmesg produces the following output:
>
> Copyright (c) 1992-2004 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993,
> 1994
> The Regents of the University of California. All rights
> reserved.
> FreeBSD 5.2.1-RELEASE #0: Mon Feb 23 20:45:55 GMT 2004
> [EMAIL PROTECTED]:/usr/obj/usr/src/sys/GENERIC
> Preloaded elf kernel "/boot/kernel/kernel" at 0xc0a35000.
> Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0a351f4.
> Timecounter "i8254" frequency 1193182 Hz quality 0
> CPU: Intel Pentium III (797.97-MHz 686-class CPU)
>   Origin = "GenuineIntel"  Id = 0x686  Stepping = 6
>
> Features=0x383f9ff CA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
> real memory  = 268369920 (255 MB)
> avail memory = 251047936 (239 MB)
> Pentium Pro MTRR support enabled
> npx0: [FAST]
> npx0:  on motherboard
> npx0: INT 16 interface
> acpi0:  on motherboard
> pcibios: BIOS version 2.10
> Using $PIR table, 6 entries at 0xc00fdee0
> acpi0: Power Button (fixed)
> Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on
> acpi0
> acpi_cpu0:  on acpi0
> acpi_button0:  on acpi0
> acpi_button1:  on acpi0
> pcib0:  port
> 0x5000-0x500f,0x4080-0x40ff,0x4000-0x407f,0xcf8-0xcff on acpi0
> pci0:  on pcib0
> pcib0: slot 9 INTA is routed to irq 10
> pcib0: slot 10 INTA is routed to irq 12
> pcib0: slot 11 INTA is routed to irq 5
> agp0:  mem
> 0xd800-0xdbff at device 0.0 on pci0
> pcib1:  at device 1.0 on pci0
> pci1:  on pcib1
> pcib0: slot 1 INTA is routed to irq 11
> pcib1: slot 0 INTA is routed to irq 11
> pci1:  at device 0.0 (no driver attached)
> isab0:  at device 7.0 on pci0
> isa0:  on isab0
> atapci0:  port 0xd000-0xd00f at
> device 7.1
> on pci0
> ata0: at 0x1f0 irq 14 on atapci0
> ata0: [MPSAFE]
> ata1: at 0x170 irq 15 on atapci0
> ata1: [MPSAFE]
> pci0:  at device 7.3 (no driver attached)
> rl0:  port 0xd800-0xd8ff mem
> 0xe3001000-0xe30010ff irq 10 at device 9.0 on pci0
> rl0: Ethernet address: 00:40:33:ab:df:66
> miibus0:  on rl0
> rlphy0:  on miibus0
> rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> pci0:  at device 10.0 (no driver attached)
> ahc0:  port 0xe000-0xe0ff mem
> 0xe300-0xe3000fff irq 5 at device 11.0 on pci0
> aic7870: Single Channel A, SCSI Id=7, 16/253 SCBs
> fdc0:  port
> 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0
> fdc0: FIFO enabled, 8 bytes threshold
> fd0: <1440-KB 3.5" drive> on fdc0 drive 0
> sio0 port 0x3f8-0x3ff irq 4 on acpi0
> sio0: type 16550A
> sio1 port 0x2f8-0x2ff irq 3 on acpi0
> sio1: type 16550A
> ppc0 port 0x378-0x37f irq 7 on acpi0
> ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
> ppbus0:  on ppc0
> plip0:  on ppbus0
> lpt0:  on ppbus0
> lpt0: Interrupt-driven port
> ppi0:  on ppbus0
> atkbdc0:  port 0x64,0x60 irq 1 on acpi0
> atkbd0:  flags 0x1 irq 1 on atkbdc0
> kbd0 at atkbd0
> orm0:  at iomem 0xc8000-0xca7ff,0xc-0xc7fff on isa0
> pmtimer0 on isa0
> sc0:  at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> vga0:  at port 0x3c0-0x3df iomem 0xa-0xb on
> isa0
> Timecounter "TSC" frequency 797967629 Hz quality 800
> Timecounters tick every 10.000 msec
> Waiting 15 seconds for SCSI devices to settle
> acpi_cpu: throttling enabled, 2 steps (100% to 50.0%), currently
> 100.0%
> GEOM: create disk cd0 dp=0xc2d77600
> GEOM: create disk cd1 dp=0xc2d77e00
> GEOM: create disk da0 dp=0xc2e24050
> GEOM: create disk da1 dp=0xc2e26850
> GEOM: create disk da2 dp=0xc2e26450
> cd0 at ahc0 bus 0 target 4 lun 0
> cd0:  Removable CD-ROM SCSI-2 device
> cd0: 10.000MB/s transfers

Problem Installing FreeBSD 6.0, asking for help

2006-03-11 Thread ehrhard . herbst
Hello,

may I ask you for help with the following Problem:
When I try to install FreeBsd6.0, there is the following error during the
boot process (because the system is not able to boot from CD, I have to boot
from floppy) occurs:
ahc0: probe1:ahc0:0:1:0: SCB 6: immediate reset Flags 0x620
ahc0: probe1:ahc0:0:1:0: No longer in timeout, status=25b
ahc0: Issued channel A bus reset, SCBs 6 aborted.
...
...
...

There are variants of the messages with different SCB, flags and status.

As a result, the install program does not find any disk.
FreeBSD5.2 is running and dmesg produces the following output:

Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.2.1-RELEASE #0: Mon Feb 23 20:45:55 GMT 2004
[EMAIL PROTECTED]:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0a35000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0a351f4.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel Pentium III (797.97-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x686  Stepping = 6
  
Features=0x383f9ff
real memory  = 268369920 (255 MB)
avail memory = 251047936 (239 MB)
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0:  on motherboard
npx0: INT 16 interface
acpi0:  on motherboard
pcibios: BIOS version 2.10
Using $PIR table, 6 entries at 0xc00fdee0
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
acpi_cpu0:  on acpi0
acpi_button0:  on acpi0
acpi_button1:  on acpi0
pcib0:  port
0x5000-0x500f,0x4080-0x40ff,0x4000-0x407f,0xcf8-0xcff on acpi0
pci0:  on pcib0
pcib0: slot 9 INTA is routed to irq 10
pcib0: slot 10 INTA is routed to irq 12
pcib0: slot 11 INTA is routed to irq 5
agp0:  mem
0xd800-0xdbff at device 0.0 on pci0
pcib1:  at device 1.0 on pci0
pci1:  on pcib1
pcib0: slot 1 INTA is routed to irq 11
pcib1: slot 0 INTA is routed to irq 11
pci1:  at device 0.0 (no driver attached)
isab0:  at device 7.0 on pci0
isa0:  on isab0
atapci0:  port 0xd000-0xd00f at device 7.1
on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
pci0:  at device 7.3 (no driver attached)
rl0:  port 0xd800-0xd8ff mem
0xe3001000-0xe30010ff irq 10 at device 9.0 on pci0
rl0: Ethernet address: 00:40:33:ab:df:66
miibus0:  on rl0
rlphy0:  on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci0:  at device 10.0 (no driver attached)
ahc0:  port 0xe000-0xe0ff mem
0xe300-0xe3000fff irq 5 at device 11.0 on pci0
aic7870: Single Channel A, SCSI Id=7, 16/253 SCBs
fdc0:  port
0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0 port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0:  on ppc0
plip0:  on ppbus0
lpt0:  on ppbus0
lpt0: Interrupt-driven port
ppi0:  on ppbus0
atkbdc0:  port 0x64,0x60 irq 1 on acpi0
atkbd0:  flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
orm0:  at iomem 0xc8000-0xca7ff,0xc-0xc7fff on isa0
pmtimer0 on isa0
sc0:  at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0:  at port 0x3c0-0x3df iomem 0xa-0xb on isa0
Timecounter "TSC" frequency 797967629 Hz quality 800
Timecounters tick every 10.000 msec
Waiting 15 seconds for SCSI devices to settle
acpi_cpu: throttling enabled, 2 steps (100% to 50.0%), currently 100.0%
GEOM: create disk cd0 dp=0xc2d77600
GEOM: create disk cd1 dp=0xc2d77e00
GEOM: create disk da0 dp=0xc2e24050
GEOM: create disk da1 dp=0xc2e26850
GEOM: create disk da2 dp=0xc2e26450
cd0 at ahc0 bus 0 target 4 lun 0
cd0:  Removable CD-ROM SCSI-2 device
cd0: 10.000MB/s transfers (10.000MHz, offset 15)
cd0: cd present [329666 x 2048 byte records]
cd1 at ahc0 bus 0 target 5 lun 0
cd1:  Removable CD-ROM SCSI-2 device
cd1: 8.333MB/s transfers (8.333MHz, offset 15)
cd1: Attempt to query device size failed: NOT READY, Medium not present -
tray closed
da2 at ahc0 bus 0 target 2 lun 0
da2:  Fixed Direct Access SCSI-2 device
da2: 10.000MB/s transfers (10.000MHz, offset 15)
da2: 4134MB (8467200 512 byte sectors: 255H 63S/T 527C)
da0 at ahc0 bus 0 target 0 lun 0
da0:  Fixed Direct Access SCSI-2 device
da0: 10.000MB/s transfers (10.000MHz, offset 15)
da0: 4134MB (8467200 512 byte sectors: 255H 63S/T 527C)
da1 at ahc0 bus 0 target 1 lun 0
da1:  Fixed Direct Access SCSI-2 device
da1: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing Enabled
da1: 4357MB (8925000 512 byte sectors: 255H 63S/T 555C)
Mounting root from ufs:/dev/da0s1a

Best regards
E. Herbst.

___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe,