Hello,
To activate Cisco Aironet 1200 32-bit CardBus Adaptor you need to load
if_ath driver
(Atheros 5212), for this type the command:
# kldload if_ath
after this you see some messages at the console and network interface
ath0 or ath1
into the system, then ifconfig ath0 up and yuor card works.
Thanks.
Grigory.
Grigory Klyuchnikov wrote:
Hello,
I have Cisco Aironet 32-bit CardBus Adaptor AIR-CB21AG-A-K9.
When I attach it to the notebook with FreeBSD 5.4, the following
message appears on the console:
kernel: cardbus0: at device 0.0 (no driver attached)
The kernel config has options:
# PCMCIA and cardbus bridge support
device cbb # cardbus (yenta) bridge
device pccard # PC Card (16-bit) bus
device cardbus # CardBus (32-bit) bus
...
# Wireless NIC cards
device wlan# 802.11 support
device an # Aironet 4500/4800 802.11 wireless NIC
device awi # BayStack 660 and others
device wi # WaveLAN/Intersil/Symbol 802.11
Does it means, that FreeBSD has not support of Aironet 32-bit cardbus
adapter? And what can I resolve the problem? Maybe anyone has any
experience with such adapter... Please, tell me any points to docs or
some examples...
Thanks.
PS: But Aironet 16-bit pccard works OK.
Regards,
Grigory Klyuchnikov, System Engineer,
Institute for System Programming
Russian Academy of Sciences
<[EMAIL PROTECTED]>
--
Grigory Klyuchnikov, System Engineer,
Institute for System Programming
Russian Academy of Sciences
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
