SOLVED - Re: CARP within VirtualBox Does it work?
On Dec 4, 2012, at 8:17 PM, dweimer dwei...@dweimer.net wrote: On 2012-12-01 03:14, Damien Fleuriot wrote: On 30 November 2012 20:44, dweimer dwei...@dweimer.net wrote: On 2012-11-29 14:07, dweimer wrote: On 2012-11-29 12:53, Fleuriot Damien wrote: On Nov 29, 2012, at 6:43 PM, dweimer dwei...@dweimer.net wrote: I was trying to setup a test of CARP on two virtual machines running in VirtualBox 4.2.4r81684 I am not sure if I have something wrong with my CARP configuration or if VirtualBox just doesn't work right with it. I can only ping the CARP interface IP address from the machine listed as MASTER, if I do an ifconfig carp0 down on the MASTER the other machine correctly switches form BACKUP to MASTER and then I can ping the interface from it but not from the Original system. The VirtualBox systems are both using bridged networking, and the host cannot ping the carp0 IP address but can ping the interface IP address. Before I go through more trouble shooting, does anyone know if CARP doesn't work with VirtualBox? carp configuration Machine1: ifconfig_em0=UP ifconfig_em0_name=LAN ipv4_addrs_LAN=10.20.190.201/16 defaultrouter=10.20.111.2 cloned_interfaces=carp0 ifconfig_carp0=vhid 1 advskew 100 pass ReduntantCarpTest 10.20.190.203/16 ifconfig carp0: carp0 flags=49UP,LOOPBACK,RUNNING metric 0 mtu 1500 inet 10.20.190.203 netmask 0x nd6 options=29PREFORMNUD,IFDISABLED,AUTO_LINKLOCAL carp: MASTER vhid 1 advbase 1 advskew 100 Machine2: ifconfig_em0=UP ifconfig_em0_name=LAN ipv4_addrs_LAN=10.20.190.202/16 defaultrouter=10.20.111.2 cloned_interfaces=carp0 ifconfig_carp0=vhid 1 pass ReduntantCarpTest 10.20.190.203/16 ifconfig carp0: carp0 flags=49UP,LOOPBACK,RUNNING metric 0 mtu 1500 inet 10.20.190.203 netmask 0x nd6 options=29PREFORMNUD,IFDISABLED,AUTO_LINKLOCAL carp: BACKUP vhid 1 advbase 1 advskew 0 FreeBSD version is 9.1RC3 on both test machines. We're using FreeBSD and CARP in virtualized environments at work, albeit not on VirtualBox but on Proxmox/KVM. First, I would advise replacing 10.20.190.203/16 with 10.20.190.203/32 I notice your carp0 is MASTER on machine1 with an advskew of 100 vs machine 2 advskew 0, same advbase. Confirm this is *after* you've set carp0 down on machine2. If both carps are up and machine1 with advskew 100 beats machine2 with advskew 0, you have an additional problem. See if you have any more luck with the /32 address on carp0 anyway. The documentation shows the mask matching that of the interface: hostname=hostb.example.org ifconfig_fxp0=inet 192.168.1.4 netmask 255.255.255.0 cloned_interfaces=carp0 ifconfig_carp0=vhid 2 pass testpass 192.168.1.51/24 This is consistent with the man page for CARP on the system as well. Regardless I tried with the /32 and had the same result as I did with the /16. I had done various UP/DOWN on interfaces so the current MASTER was just the last one to have not been DOWN. I think I might just copy these VMs to my VMWARE Workstation 9 install on my home PC after work tonight and see if the problem persists. The behavior definitely changed going from VirtualBox to VMWare, the only change in my configuration was the IP addresses to match the home network. However now I can talk to the carp interface form other machines, but they receive two response one from each of the test systems. TCPDUMP shows that they are each seeing the others broadcasts, but for some reason they are both running as MASTER. If you run a DOWN/UP on the interface, it briefly shows as BACKUP before switching to MASTER. I tried with both /24 subnet of my home network, and setting the carp0 interface to /32, both behaved the same. Any one have any other ideas, as to whether this comes down to a Virtual Network Issue, or a setup issue on my part. Well, it definitely works here for us on Proxmox/KVM. When you tcpdump on your either host, do you see the CARP advertisements from the other ? FInd below the advertisements as seen from our CARP backup firewall: $ sudo tcpdump -ni vlan14 vrrp tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on vlan14, link-type EN10MB (Ethernet), capture size 96 bytes 10:11:09.084568 IP 195.158.240.[snip] 224.0.0.18: VRRPv2, Advertisement, vrid 114, prio 50, authtype none, intvl 1s, length 36 10:11:10.282826 IP 195.158.240.[snip] 224.0.0.18: VRRPv2, Advertisement, vrid 114, prio 50, authtype none, intvl 1s, length 36 10:11:11.481075 IP 195.158.240.[snip] 224.0.0.18: VRRPv2, Advertisement, vrid 114, prio 50, authtype none, intvl 1s, length 36 Proabbly should have been more clear early when I mentioned I could see the others broadcasts, this is what I menat, yes they do see the others advertisements. It most definitely was virtual network related, found some information on the pfSense wiki that directed me to the advanced settings on
Re: CARP within VirtualBox Does it work?
On 2012-12-01 03:14, Damien Fleuriot wrote: On 30 November 2012 20:44, dweimer dwei...@dweimer.net wrote: On 2012-11-29 14:07, dweimer wrote: On 2012-11-29 12:53, Fleuriot Damien wrote: On Nov 29, 2012, at 6:43 PM, dweimer dwei...@dweimer.net wrote: I was trying to setup a test of CARP on two virtual machines running in VirtualBox 4.2.4r81684 I am not sure if I have something wrong with my CARP configuration or if VirtualBox just doesn't work right with it. I can only ping the CARP interface IP address from the machine listed as MASTER, if I do an ifconfig carp0 down on the MASTER the other machine correctly switches form BACKUP to MASTER and then I can ping the interface from it but not from the Original system. The VirtualBox systems are both using bridged networking, and the host cannot ping the carp0 IP address but can ping the interface IP address. Before I go through more trouble shooting, does anyone know if CARP doesn't work with VirtualBox? carp configuration Machine1: ifconfig_em0=UP ifconfig_em0_name=LAN ipv4_addrs_LAN=10.20.190.201/16 defaultrouter=10.20.111.2 cloned_interfaces=carp0 ifconfig_carp0=vhid 1 advskew 100 pass ReduntantCarpTest 10.20.190.203/16 ifconfig carp0: carp0 flags=49UP,LOOPBACK,RUNNING metric 0 mtu 1500 inet 10.20.190.203 netmask 0x nd6 options=29PREFORMNUD,IFDISABLED,AUTO_LINKLOCAL carp: MASTER vhid 1 advbase 1 advskew 100 Machine2: ifconfig_em0=UP ifconfig_em0_name=LAN ipv4_addrs_LAN=10.20.190.202/16 defaultrouter=10.20.111.2 cloned_interfaces=carp0 ifconfig_carp0=vhid 1 pass ReduntantCarpTest 10.20.190.203/16 ifconfig carp0: carp0 flags=49UP,LOOPBACK,RUNNING metric 0 mtu 1500 inet 10.20.190.203 netmask 0x nd6 options=29PREFORMNUD,IFDISABLED,AUTO_LINKLOCAL carp: BACKUP vhid 1 advbase 1 advskew 0 FreeBSD version is 9.1RC3 on both test machines. We're using FreeBSD and CARP in virtualized environments at work, albeit not on VirtualBox but on Proxmox/KVM. First, I would advise replacing 10.20.190.203/16 with 10.20.190.203/32 I notice your carp0 is MASTER on machine1 with an advskew of 100 vs machine 2 advskew 0, same advbase. Confirm this is *after* you've set carp0 down on machine2. If both carps are up and machine1 with advskew 100 beats machine2 with advskew 0, you have an additional problem. See if you have any more luck with the /32 address on carp0 anyway. The documentation shows the mask matching that of the interface: hostname=hostb.example.org ifconfig_fxp0=inet 192.168.1.4 netmask 255.255.255.0 cloned_interfaces=carp0 ifconfig_carp0=vhid 2 pass testpass 192.168.1.51/24 This is consistent with the man page for CARP on the system as well. Regardless I tried with the /32 and had the same result as I did with the /16. I had done various UP/DOWN on interfaces so the current MASTER was just the last one to have not been DOWN. I think I might just copy these VMs to my VMWARE Workstation 9 install on my home PC after work tonight and see if the problem persists. The behavior definitely changed going from VirtualBox to VMWare, the only change in my configuration was the IP addresses to match the home network. However now I can talk to the carp interface form other machines, but they receive two response one from each of the test systems. TCPDUMP shows that they are each seeing the others broadcasts, but for some reason they are both running as MASTER. If you run a DOWN/UP on the interface, it briefly shows as BACKUP before switching to MASTER. I tried with both /24 subnet of my home network, and setting the carp0 interface to /32, both behaved the same. Any one have any other ideas, as to whether this comes down to a Virtual Network Issue, or a setup issue on my part. Well, it definitely works here for us on Proxmox/KVM. When you tcpdump on your either host, do you see the CARP advertisements from the other ? FInd below the advertisements as seen from our CARP backup firewall: $ sudo tcpdump -ni vlan14 vrrp tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on vlan14, link-type EN10MB (Ethernet), capture size 96 bytes 10:11:09.084568 IP 195.158.240.[snip] 224.0.0.18: VRRPv2, Advertisement, vrid 114, prio 50, authtype none, intvl 1s, length 36 10:11:10.282826 IP 195.158.240.[snip] 224.0.0.18: VRRPv2, Advertisement, vrid 114, prio 50, authtype none, intvl 1s, length 36 10:11:11.481075 IP 195.158.240.[snip] 224.0.0.18: VRRPv2, Advertisement, vrid 114, prio 50, authtype none, intvl 1s, length 36 Proabbly should have been more clear early when I mentioned I could see the others broadcasts, this is what I menat, yes they do see the others advertisements. It most definitely was virtual network related, found some information on the pfSense wiki that directed me to the advanced settings on the ethernet adapters within the VirtualBox network settings on the virtual machines. Promiscuous mode was set to Deny, change this to Enable All,
CARP within VirtualBox Does it work?
I was trying to setup a test of CARP on two virtual machines running in VirtualBox 4.2.4r81684 I am not sure if I have something wrong with my CARP configuration or if VirtualBox just doesn't work right with it. I can only ping the CARP interface IP address from the machine listed as MASTER, if I do an ifconfig carp0 down on the MASTER the other machine correctly switches form BACKUP to MASTER and then I can ping the interface from it but not from the Original system. The VirtualBox systems are both using bridged networking, and the host cannot ping the carp0 IP address but can ping the interface IP address. Before I go through more trouble shooting, does anyone know if CARP doesn't work with VirtualBox? carp configuration Machine1: ifconfig_em0=UP ifconfig_em0_name=LAN ipv4_addrs_LAN=10.20.190.201/16 defaultrouter=10.20.111.2 cloned_interfaces=carp0 ifconfig_carp0=vhid 1 advskew 100 pass ReduntantCarpTest 10.20.190.203/16 ifconfig carp0: carp0 flags=49UP,LOOPBACK,RUNNING metric 0 mtu 1500 inet 10.20.190.203 netmask 0x nd6 options=29PREFORMNUD,IFDISABLED,AUTO_LINKLOCAL carp: MASTER vhid 1 advbase 1 advskew 100 Machine2: ifconfig_em0=UP ifconfig_em0_name=LAN ipv4_addrs_LAN=10.20.190.202/16 defaultrouter=10.20.111.2 cloned_interfaces=carp0 ifconfig_carp0=vhid 1 pass ReduntantCarpTest 10.20.190.203/16 ifconfig carp0: carp0 flags=49UP,LOOPBACK,RUNNING metric 0 mtu 1500 inet 10.20.190.203 netmask 0x nd6 options=29PREFORMNUD,IFDISABLED,AUTO_LINKLOCAL carp: BACKUP vhid 1 advbase 1 advskew 0 FreeBSD version is 9.1RC3 on both test machines. -- Thanks, Dean E. Weimer http://www.dweimer.net/ ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: CARP within VirtualBox Does it work?
On Nov 29, 2012, at 6:43 PM, dweimer dwei...@dweimer.net wrote: I was trying to setup a test of CARP on two virtual machines running in VirtualBox 4.2.4r81684 I am not sure if I have something wrong with my CARP configuration or if VirtualBox just doesn't work right with it. I can only ping the CARP interface IP address from the machine listed as MASTER, if I do an ifconfig carp0 down on the MASTER the other machine correctly switches form BACKUP to MASTER and then I can ping the interface from it but not from the Original system. The VirtualBox systems are both using bridged networking, and the host cannot ping the carp0 IP address but can ping the interface IP address. Before I go through more trouble shooting, does anyone know if CARP doesn't work with VirtualBox? carp configuration Machine1: ifconfig_em0=UP ifconfig_em0_name=LAN ipv4_addrs_LAN=10.20.190.201/16 defaultrouter=10.20.111.2 cloned_interfaces=carp0 ifconfig_carp0=vhid 1 advskew 100 pass ReduntantCarpTest 10.20.190.203/16 ifconfig carp0: carp0 flags=49UP,LOOPBACK,RUNNING metric 0 mtu 1500 inet 10.20.190.203 netmask 0x nd6 options=29PREFORMNUD,IFDISABLED,AUTO_LINKLOCAL carp: MASTER vhid 1 advbase 1 advskew 100 Machine2: ifconfig_em0=UP ifconfig_em0_name=LAN ipv4_addrs_LAN=10.20.190.202/16 defaultrouter=10.20.111.2 cloned_interfaces=carp0 ifconfig_carp0=vhid 1 pass ReduntantCarpTest 10.20.190.203/16 ifconfig carp0: carp0 flags=49UP,LOOPBACK,RUNNING metric 0 mtu 1500 inet 10.20.190.203 netmask 0x nd6 options=29PREFORMNUD,IFDISABLED,AUTO_LINKLOCAL carp: BACKUP vhid 1 advbase 1 advskew 0 FreeBSD version is 9.1RC3 on both test machines. We're using FreeBSD and CARP in virtualized environments at work, albeit not on VirtualBox but on Proxmox/KVM. First, I would advise replacing 10.20.190.203/16 with 10.20.190.203/32 I notice your carp0 is MASTER on machine1 with an advskew of 100 vs machine 2 advskew 0, same advbase. Confirm this is *after* you've set carp0 down on machine2. If both carps are up and machine1 with advskew 100 beats machine2 with advskew 0, you have an additional problem. See if you have any more luck with the /32 address on carp0 anyway. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
