CD burning problem
Hello I am unable to burn cd with my new Sony DVD-RW. I have been fighting with this for month. Sorry for have to post this message for such a basic task, Bellow is the error message that is produced by cdrecord Thank you Aaron [EMAIL PROTECTED]# cdrecord -scanbus Cdrecord-Clone 2.01 (i386-unknown-freebsd6.1) Copyright (C) 1995-2004 Jörg Schilling Using libscg version 'schily-0.8'. scsibus1: 1,0,0 100) 'SONY' 'DVD RW DRU-820A ' '1.0b' Removable CD-ROM 1,1,0 101) * 1,2,0 102) * 1,3,0 103) * 1,4,0 104) * 1,5,0 105) * 1,6,0 106) * 1,7,0 107) * [EMAIL PROTECTED]# cdrecord dev=1,0,0 k3b_image.iso cdrecord: No write mode specified. cdrecord: Asuming -tao mode. cdrecord: Future versions of cdrecord may have different drive dependent defaults. cdrecord: Continuing in 5 seconds... Cdrecord-Clone 2.01 (i386-unknown-freebsd6.1) Copyright (C) 1995-2004 Jörg Schilling scsidev: '1,0,0' scsibus: 1 target: 0 lun: 0 Using libscg version 'schily-0.8'. Device type: Removable CD-ROM Version: 0 Response Format: 2 Capabilities : Vendor_info: 'SONY' Identifikation : 'DVD RW DRU-820A ' Revision : '1.0b' Device seems to be: Generic mmc2 DVD-R/DVD-RW. cdrecord: This version of cdrecord does not include DVD-R/DVD-RW support code. cdrecord: If you need DVD-R/DVD-RW support, ask the Author for cdrecord-ProDVD. cdrecord: Free test versions and free keys for personal use are at ftp://ftp.berlios.de/pub/cdrecord/ProDVD/ Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr). Driver flags : MMC-3 SWABAUDIO BURNFREE Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R Starting to write CD/DVD at speed 40 in real TAO mode for single session. Last chance to quit, starting real write0 seconds. Operation starts. Turning BURN-Free off cdrecord: Input/output error. write_g1: scsi sendcmd: retryable error CDB: 2A 00 00 00 01 55 00 00 1F 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 04 00 00 00 00 0A 4F 85 00 00 08 03 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Sense Key: 0x4 Hardware Error, Segment 0 Sense Code: 0x08 Qual 0x03 (logical unit communication crc error (ultra-dma/32)) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 18.206s timeout 40s write track data: error after 698368 bytes cdrecord: A write error occured. cdrecord: Please properly read the error message above. cdrecord: Input/output error. close track/session: scsi sendcmd: retryable error CDB: 5B 00 02 00 00 00 00 00 00 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 2C 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Sense Key: 0x5 Illegal Request, Segment 0 Sense Code: 0x2C Qual 0x00 (command sequence error) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 0.000s timeout 480s cmd finished after 0.000s timeout 480s cdrecord: Cannot fixate disk. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: CD burning problem
Aaron Siegel wrote: Hello I am unable to burn cd with my new Sony DVD-RW. I have been fighting with this for month. Sorry for have to post this message for such a basic task, Bellow is the error message that is produced by cdrecord Thank you Aaron [EMAIL PROTECTED]# cdrecord -scanbus Cdrecord-Clone 2.01 (i386-unknown-freebsd6.1) Copyright (C) 1995-2004 Jörg Schilling Using libscg version 'schily-0.8'. scsibus1: 1,0,0 100) 'SONY' 'DVD RW DRU-820A ' '1.0b' Removable CD-ROM 1,1,0 101) * 1,2,0 102) * 1,3,0 103) * 1,4,0 104) * 1,5,0 105) * 1,6,0 106) * 1,7,0 107) * [EMAIL PROTECTED]# cdrecord dev=1,0,0 k3b_image.iso cdrecord: No write mode specified. cdrecord: Asuming -tao mode. cdrecord: Future versions of cdrecord may have different drive dependent defaults. cdrecord: Continuing in 5 seconds... Cdrecord-Clone 2.01 (i386-unknown-freebsd6.1) Copyright (C) 1995-2004 Jörg Schilling scsidev: '1,0,0' scsibus: 1 target: 0 lun: 0 Using libscg version 'schily-0.8'. Device type: Removable CD-ROM Version: 0 Response Format: 2 Capabilities : Vendor_info: 'SONY' Identifikation : 'DVD RW DRU-820A ' Revision : '1.0b' Device seems to be: Generic mmc2 DVD-R/DVD-RW. cdrecord: This version of cdrecord does not include DVD-R/DVD-RW support code. cdrecord: If you need DVD-R/DVD-RW support, ask the Author for cdrecord-ProDVD. cdrecord: Free test versions and free keys for personal use are at ftp://ftp.berlios.de/pub/cdrecord/ProDVD/ Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr). Driver flags : MMC-3 SWABAUDIO BURNFREE Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R Starting to write CD/DVD at speed 40 in real TAO mode for single session. Last chance to quit, starting real write0 seconds. Operation starts. Turning BURN-Free off cdrecord: Input/output error. write_g1: scsi sendcmd: retryable error CDB: 2A 00 00 00 01 55 00 00 1F 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 04 00 00 00 00 0A 4F 85 00 00 08 03 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Sense Key: 0x4 Hardware Error, Segment 0 Sense Code: 0x08 Qual 0x03 (logical unit communication crc error (ultra-dma/32)) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 18.206s timeout 40s write track data: error after 698368 bytes cdrecord: A write error occured. cdrecord: Please properly read the error message above. cdrecord: Input/output error. close track/session: scsi sendcmd: retryable error CDB: 5B 00 02 00 00 00 00 00 00 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 2C 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Sense Key: 0x5 Illegal Request, Segment 0 Sense Code: 0x2C Qual 0x00 (command sequence error) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 0.000s timeout 480s cmd finished after 0.000s timeout 480s cdrecord: Cannot fixate disk. Cheap media? How much data are you trying to burn? -Garrett ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
CD Burning problem
Since upgrading a couple of times I'm now seeing this error when burning to a CD: Sep 18 11:43:36 stargate kernel: acd0: WARNING - READ_BUFFER read data overrun 30724 Sep 18 11:43:36 stargate kernel: acd0: WARNING - MODE_SENSE_BIG read data overrun 13616 Sep 18 11:43:36 stargate kernel: acd0: WARNING - MODE_SENSE_BIG read data overrun 13616 Sep 18 11:43:36 stargate kernel: acd0: WARNING - READ_TOC read data overrun 404 Sep 18 11:43:36 stargate kernel: acd0: WARNING - READ_TOC read data overrun 4028 Sep 18 11:45:30 stargate kernel: swap_pager: indefinite wait buffer: bufobj: 0, blkno: 83845, size: 4096 Sep 18 11:46:10 stargate last message repeated 2 times Sep 18 11:46:30 stargate kernel: swap_pager: indefinite wait buffer: bufobj: 0, blkno: 83845, size: 4096 uname: FreeBSD stargate 7.0-CURRENT FreeBSD 7.0-CURRENT #6: Sat Sep 17 05:36:55 AKDT 2005 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/STARGATE i386 The box in question has 256Mb of ram and 256M Swap X2 (256Mb on each drive). I have not seen this error before, k3b will no longer verify the disk (errors out) and the box becomes unresponsive till the CD finishes. The CD seems to be ok. Any suggestions? TIA, Beech -- --- Beech Rintoul - System Administrator - [EMAIL PROTECTED] /\ ASCII Ribbon Campaign | NorthWind Communications \ / - NO HTML/RTF in e-mail | 201 East 9th Avenue Ste.310 X - NO Word docs in e-mail | Anchorage, AK 99501 / \ --- pgpiJtKio2bTB.pgp Description: PGP signature
