Re: Digitemp on freebsd 6.1
If I understand it right, digitemp is a Linux program - don't you need to run it under Linux emulation? I've compiled from the sources and the compilation succeeded without errors. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Digitemp on freebsd 6.1
Hi I'm trying to use digitemp (http://www.digitemp.com) on freebsd6.1 but my attempt so far is without success. Here what I've done, on a minimal freebsd installation: downloaded the 3.4.0 tgz, installed gmake, then compiled with gmake ds9097 ( worked without errors) ./digitemp_9097 -i -s /dev/ttyd0 -q -c ./config to initialize the program Digitemp starts and then nothing happens. I'm using a passive circuit and I've verified that it works. Installed linux on the same machine and it works. I've checked that the serial interface on the freebsd machine works correctly connecting a serial modem and issuing ati command from minicom. Used root to avoid problems connected with permissions, chmodded to 777 all /dev/ttyd*, tried ttyd1 the result is always the same, the program starts without errors and just stays there doing (apparently) nothing, to exit I've to interrupt the execution. Since there are no errors I've no other idea of what is wrong. Any help would be greatly appreciated, thanks Leo ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Digitemp on freebsd 6.1
On 10/20/06, leo fante [EMAIL PROTECTED] wrote: Hi I'm trying to use digitemp (http://www.digitemp.com) on freebsd6.1 but my attempt so far is without success. Here what I've done, on a minimal freebsd installation: downloaded the 3.4.0 tgz, installed gmake, then compiled with gmake ds9097 ( worked without errors) ./digitemp_9097 -i -s /dev/ttyd0 -q -c ./config to initialize the program Digitemp starts and then nothing happens. I'm using a passive circuit and I've verified that it works. Installed linux on the same machine and it works. I've checked that the serial interface on the freebsd machine works correctly connecting a serial modem and issuing ati command from minicom. Used root to avoid problems connected with permissions, chmodded to 777 all /dev/ttyd*, tried ttyd1 the result is always the same, the program starts without errors and just stays there doing (apparently) nothing, to exit I've to interrupt the execution. Since there are no errors I've no other idea of what is wrong. Any help would be greatly appreciated, thanks If I understand it right, digitemp is a Linux program - don't you need to run it under Linux emulation? -- Juha ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]