Re: ICH8 chipset support?

2006-07-24 Thread Lowell Gilbert
Nick Sayer [EMAIL PROTECTED] writes:

 I just upgraded my machine at home to a Conroy-ready motherboard - An
 Asus P5B. This particular motherboard has the smallest fraction of
 recognized devices I think I've ever come across. From what I can
 tell, the blame can be placed squarely on the Intel ICH8 chipset that
 supplies almost all of the devices in the system.

 USB is working, though it is recognized only generically. The ICH8
 SATA ports do not seem to work properly (thank goodness for the
 JMicro RAID controller - which can be used without RAID). The audio
 subsystem, SMB controller and the Realtek on-board Ethernet aren't
 recognized at all. There's an nVidia PCI Express graphics card in
 there too, but I probably won't even run X on this machine, much less
 3D stuff.

 I'll attach the output from pciconf -l and the dmesg.boot. At this
 point, it is up, sort of.

 Is there any hope of improving support for this system?

*Some* improvement is probably pretty easy.  It doesn't seem to be
recognizing the System Management Bus at all, and just adding the
appropriate device IDs to the kernel tables might get the basic 
bus exploration to occur.  And then you'll see whether the drivers 
can attach...

Good luck.
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]


ICH8 chipset support?

2006-07-22 Thread Nick Sayer
I just upgraded my machine at home to a Conroy-ready motherboard - An  
Asus P5B. This particular motherboard has the smallest fraction of  
recognized devices I think I've ever come across. From what I can  
tell, the blame can be placed squarely on the Intel ICH8 chipset that  
supplies almost all of the devices in the system.


USB is working, though it is recognized only generically. The ICH8  
SATA ports do not seem to work properly (thank goodness for the  
JMicro RAID controller - which can be used without RAID). The audio  
subsystem, SMB controller and the Realtek on-board Ethernet aren't  
recognized at all. There's an nVidia PCI Express graphics card in  
there too, but I probably won't even run X on this machine, much less  
3D stuff.


I'll attach the output from pciconf -l and the dmesg.boot. At this  
point, it is up, sort of.


Is there any hope of improving support for this system?
[EMAIL PROTECTED]:0:0:class=0x06 card=0x81ea1043 chip=0x29a08086 
rev=0x02 hdr=0x00
[EMAIL PROTECTED]:1:0: class=0x060400 card=0x0088 chip=0x29a18086 rev=0x02 
hdr=0x01
[EMAIL PROTECTED]:26:0:class=0x0c0300 card=0x81ec1043 chip=0x28348086 
rev=0x02 hdr=0x00
[EMAIL PROTECTED]:26:1:class=0x0c0300 card=0x81ec1043 chip=0x28358086 
rev=0x02 hdr=0x00
[EMAIL PROTECTED]:26:7:class=0x0c0320 card=0x81ec1043 chip=0x283a8086 
rev=0x02 hdr=0x00
[EMAIL PROTECTED]:27:0:class=0x040300 card=0x81ec1043 chip=0x284b8086 
rev=0x02 hdr=0x00
[EMAIL PROTECTED]:28:0:class=0x060400 card=0x0040 chip=0x283f8086 
rev=0x02 hdr=0x01
[EMAIL PROTECTED]:28:3:class=0x060400 card=0x0040 chip=0x28458086 
rev=0x02 hdr=0x01
[EMAIL PROTECTED]:28:4:class=0x060400 card=0x0040 chip=0x28478086 
rev=0x02 hdr=0x01
[EMAIL PROTECTED]:29:0:class=0x0c0300 card=0x81ec1043 chip=0x28308086 
rev=0x02 hdr=0x00
[EMAIL PROTECTED]:29:1:class=0x0c0300 card=0x81ec1043 chip=0x28318086 
rev=0x02 hdr=0x00
[EMAIL PROTECTED]:29:2:class=0x0c0300 card=0x81ec1043 chip=0x28328086 
rev=0x02 hdr=0x00
[EMAIL PROTECTED]:29:7:class=0x0c0320 card=0x81ec1043 chip=0x28368086 
rev=0x02 hdr=0x00
[EMAIL PROTECTED]:30:0:class=0x060401 card=0x0050 chip=0x244e8086 
rev=0xf2 hdr=0x01
[EMAIL PROTECTED]:31:0:class=0x060100 card=0x81ec1043 chip=0x28108086 
rev=0x02 hdr=0x00
[EMAIL PROTECTED]:31:2:  class=0x01018f card=0x81ec1043 chip=0x28208086 
rev=0x02 hdr=0x00
[EMAIL PROTECTED]:31:3:class=0x0c0500 card=0x81ec1043 chip=0x283e8086 
rev=0x02 hdr=0x00
[EMAIL PROTECTED]:31:5:  class=0x010185 card=0x81ec1043 chip=0x28258086 
rev=0x02 hdr=0x00
[EMAIL PROTECTED]:0:0: class=0x03 card=0xc2233842 chip=0x016110de rev=0xa1 
hdr=0x00
[EMAIL PROTECTED]:0:0: class=0x02 card=0x81681043 chip=0x816810ec rev=0x01 
hdr=0x00
[EMAIL PROTECTED]:0:0:   class=0x010185 card=0x81e41043 chip=0x2363197b 
rev=0x02 hdr=0x00
[EMAIL PROTECTED]:0:0:   class=0x02 card=0x10128086 chip=0x10108086 
rev=0x01 hdr=0x00
[EMAIL PROTECTED]:0:1:   class=0x02 card=0x10128086 chip=0x10108086 
rev=0x01 hdr=0x00
[EMAIL PROTECTED]:2:0:  class=0x01 card=0xe2a09005 chip=0x00809005 rev=0x02 
hdr=0x00Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 6.1-RELEASE-p3 #5: Wed Jul 19 18:54:04 PDT 2006
[EMAIL PROTECTED]:/usr/obj/usr/src/sys/QUACK
ACPI APIC Table: A M I  OEMAPIC 
Timecounter i8254 frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) 4 CPU 2.66GHz (2660.49-MHz 686-class CPU)
  Origin = GenuineIntel  Id = 0xf49  Stepping = 9
  
Features=0xbfebfbffFPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE
  Features2=0x651dSSE3,RSVD2,MON,DS_CPL,TM2,CNTX-ID,CX16,b14
  AMD Features=0x2010NX,LM
  AMD Features2=0x1LAHF
real memory  = 1073348608 (1023 MB)
avail memory = 1041428480 (993 MB)
ioapic0 Version 2.0 irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: A M I OEMXSDT on motherboard
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi0: Power Button (fixed)
Timecounter ACPI-fast frequency 3579545 Hz quality 1000
acpi_timer0: 24-bit timer at 3.579545MHz port 0x808-0x80b on acpi0
cpu0: ACPI CPU on acpi0
ACPI-1304: *** Error: Method execution failed [\\_PR_.CPU1._PDC] (Node 
0xc4a6e780), AE_BAD_HEADER
pcib0: ACPI Host-PCI bridge port 0xcf8-0xcff on acpi0
pci0: ACPI PCI bus on pcib0
pcib1: ACPI PCI-PCI bridge irq 16 at device 1.0 on pci0
pci1: ACPI PCI bus on pcib1
pci1: display, VGA at device 0.0 (no driver attached)
uhci0: UHCI (generic) USB controller port 0xdc00-0xdc1f irq 16 at device 26.0 
on pci0
uhci0: [GIANT-LOCKED]
usb0: UHCI (generic) USB controller on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2