Hi
I'm trying to get XFree86 4.2.0_1.1 trying to run on a motherboard with
an Intel's intregrated video.
The board is an Intel 845GRGL using the Intel 845G chipset for Pentium
IV.
After reading through some messages relating to the Intel 810 video I
have included the Device AGP option in to my kernel so the onboard
video is now recognised as can be seen from the attatched dmseg output
however when try and start X Windows it crashes with
Symbol xf86InterpretEDID from module /usr/X11R6/lib/modules/libvbe.a is
unresol$
Symbol XAAInit from module /usr/X11R6/lib/modules/drivers/i810_drv.o is
unresol$
Symbol XAAInit from module /usr/X11R6/lib/modules/drivers/i810_drv.o is
unresol$Hi
I'm trying to get XFree86 4.2.0_1.1 trying to run on a motherboard with
an Intel's intregrated video.
The board is an Intel 845GRGL using the Intel 845G chipset for Pentium
IV.
After reading through some messages relating to the Intel 810 video I
have included the Device AGP option in to my kernel so the onboard
video is now recognised as can be seen from the attatched dmseg output
however when try and start X Windows it crashes with
Symbol xf86InterpretEDID from module /usr/X11R6/lib/modules/libvbe.a is
unresol$
Symbol XAAInit from module /usr/X11R6/lib/modules/drivers/i810_drv.o is
unresol$
Symbol XAAInit from module /usr/X11R6/lib/modules/drivers/i810_drv.o is
unresol$
Symbol XAAFillSolidRects from module
/usr/X11R6/lib/modules/drivers/i810_drv.o $
Symbol XAAFillSolidRects from module
/usr/X11R6/lib/modules/drivers/i810_drv.o $
My /etc/X11/XF86config (attached to this message) file was generated by
xf86config in text mode called by sysinstall.
Can anyone suggest where I might be going wrong and where to find a fix?
Thankx
Marc
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.7-STABLE #0: Fri Nov 8 13:47:16 CST 2002
[EMAIL PROTECTED]:/usr/obj/usr/src/sys/ZEN
Timecounter i8254 frequency 1193182 Hz
CPU: Pentium 4 (1699.82-MHz 686-class CPU)
Origin = GenuineIntel Id = 0xf13 Stepping = 3
Features=0x3febfbffFPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,b28,ACC
real memory = 259260416 (253184K bytes)
avail memory = 247873536 (242064K bytes)
Preloaded elf kernel kernel at 0xc044a000.
netsmb_dev: loaded
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 11 entries at 0xc00f4690
npx0: math processor on motherboard
npx0: INT 16 interface
pcib0: Host to PCI bridge on motherboard
pci0: PCI bus on pcib0
agp0: Intel 82845 (i845 GMCH) SVGA controller mem
0xffa8-0xffaf,0xf000-0xf7ff irq 11 at device 2.0 on pci0
agp0: detected 8060k stolen memory
agp0: aperture size is 128M
uhci0: Intel 82801DB (ICH4) USB controller USB-A port 0xe800-0xe81f irq 11 at device
29.0 on pci0
usb0: Intel 82801DB (ICH4) USB controller USB-A on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: Intel 82801DB (ICH4) USB controller USB-B port 0xe880-0xe89f irq 9 at device
29.1 on pci0
usb1: Intel 82801DB (ICH4) USB controller USB-B on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: Intel 82801DB (ICH4) USB controller USB-C port 0xec00-0xec1f irq 10 at device
29.2 on pci0
usb2: Intel 82801DB (ICH4) USB controller USB-C on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ulpt0: EPSON USB Printer, rev 1.10/1.00, addr 2, iclass 7/1
pcib1: Intel 82801BA/BAM (ICH2) Hub to PCI bridge at device 30.0 on pci0
pci1: PCI bus on pcib1
rl0: D-Link DFE-530TX+ 10/100BaseTX port 0xd800-0xd8ff mem 0xff8ff800-0xff8ff8ff irq
7 at device 0.0 on pci1
rl0: Ethernet address: 00:05:5d:28:98:fa
miibus0: MII bus on rl0
rlphy0: RealTek internal media interface on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
mlx0: Mylex version 2 RAID interface port 0xdc00-0xdc7f mem 0xff8ffc00-0xff8ffc7f
irq 10 at device 2.0 on pci1
mlx0: DAC960P/PD, 3 channels, firmware 2.73-0-00, 4MB RAM
mlxd0: Mylex System Drive on mlx0
mlxd0: 8683MB (17782784 sectors) RAID 1 (online)
fxp0: Intel Pro/100 Ethernet port 0xd480-0xd4bf mem 0xff8fe000-0xff8fefff irq 3 at
device 8.0 on pci1
fxp0: Ethernet address 00:07:e9:92:ae:7e
inphy0: i82562ET 10/100 media interface on miibus1
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isab0: PCI to ISA bridge (vendor=8086 device=24c0) at device 31.0 on pci0
isa0: ISA bus on isab0
atapci0: Intel ICH4 ATA100 controller port 0xffa0-0xffaf,0-0x3,0-0x7,0-0x3,0-0x7 at
device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
ichsmb0: SMBus controller port 0xe000-0xe01f irq 5 at
