Re: Kernel Lock up
alden.pierre wrote: When it's time to compile the GENERIC kernel my system locks up, forcing me to reboot. Here is an output of dmesg. I'm running FreeBSD 4.10. I also can provide an attachment of the compiling output. Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.10-RELEASE #0: Tue May 25 22:47:12 GMT 2004 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/GENERIC Timecounter i8254 frequency 1193182 Hz CPU: Intel Pentium III (1000.04-MHz 686-class CPU) Origin = GenuineIntel Id = 0x68a Stepping = 10 Features=0x387f9ffFPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,PN,MMX,FXSR,SSE real memory = 603914240 (589760K bytes) avail memory = 581242880 (567620K bytes) Preloaded elf kernel kernel at 0xc0551000. Pentium Pro MTRR support enabled md0: Malloc disk Using $PIR table, 7 entries at 0xc00fde80 npx0: math processor on motherboard npx0: INT 16 interface pcib0: Host to PCI bridge on motherboard pci0: PCI bus on pcib0 agp0: VIA 82C691 (Apollo Pro) host to PCI bridge mem 0xe800-0xebff at device 0.0 on pci0 pcib1: VIA 82C598MVP (Apollo MVP3) PCI-PCI (AGP) bridge at device 1.0 on pci0 pci1: PCI bus on pcib1 pci1: NVidia model 0110 graphics accelerator at 0.0 irq 10 isab0: VIA 82C686 PCI-ISA bridge at device 7.0 on pci0 isa0: ISA bus on isab0 atapci0: VIA 82C686 ATA100 controller port 0xd000-0xd00f at device 7.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 uhci0: VIA 83C572 USB controller port 0xd400-0xd41f irq 12 at device 7.2 on pci0 usb0: VIA 83C572 USB controller on uhci0 usb0: USB revision 1.0 uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhub1: Texas Instruments TUSB2046 hub, class 9/0, rev 1.10/1.25, addr 2 uhub1: 4 ports with 4 removable, self powered ukbd0: Logitech Logitech USB Keyboard, rev 1.10/15.00, addr 3, iclass 3/1 kbd0 at ukbd0 uhid0: Logitech Logitech USB Keyboard, rev 1.10/15.00, addr 3, iclass 3/0 ums0: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM), rev 1.10/3.00, addr 4, iclass 3/1 ums0: 5 buttons and Z dir. uhci1: VIA 83C572 USB controller port 0xd800-0xd81f irq 12 at device 7.3 on pci0 usb1: VIA 83C572 USB controller on uhci1 usb1: USB revision 1.0 uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered pci0: unknown card (vendor=0x1106, dev=0x3057) at 7.4 chip0: VIA 82C686 AC97 Audio port 0xe400-0xe403,0xe000-0xe003,0xdc00-0xdcff irq 11 at device 7.5 on pci0 rl0: RealTek 8139 10/100BaseTX port 0xec00-0xecff mem 0xee00-0xeeff irq 11 at device 15.0 on pci0 rl0: Ethernet address: 00:c0:26:62:97:06 miibus0: MII bus on rl0 rlphy0: RealTek internal media interface on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto orm0: Option ROMs at iomem 0xc-0xcc7ff,0xd-0xd3fff on isa0 pmtimer0 on isa0 fdc0: NEC 72065B or clone at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: 1440-KB 3.5 drive on fdc0 drive 0 atkbdc0: Keyboard controller (i8042) at port 0x60,0x64 on isa0 vga0: Generic ISA VGA at port 0x3c0-0x3df iomem 0xa-0xb on isa0 sc0: System console at flags 0x100 on isa0 sc0: VGA 16 virtual consoles, flags=0x300 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A ppc0: Parallel port at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode plip0: PLIP network interface on ppbus0 lpt0: Printer on ppbus0 lpt0: Interrupt-driven port ppi0: Parallel I/O on ppbus0 ad0: 38166MB ST340016A [77545/16/63] at ata0-master UDMA100 acd0: CD-RW CREATIVE CD-RW RW1210E at ata0-slave PIO4 acd1: DVD-ROM Pioneer DVD-ROM ATAPIModel DVD-104S 0123 at ata1-master PIO4 Mounting root from ufs:/dev/ad0s1a WARNING: / was not properly dismounted uhub1: at uhub0 port 2 (addr 2) disconnected ukbd0: detached uhid0: detached ums0: detached uhub1: detached uhub1: Texas Instruments TUSB2046 hub, class 9/0, rev 1.10/1.25, addr 2 uhub1: 4 ports with 4 removable, self powered ukbd0: Logitech Logitech USB Keyboard, rev 1.10/15.00, addr 3, iclass 3/1 kbd0 at ukbd0 uhid0: Logitech Logitech USB Keyboard, rev 1.10/15.00, addr 3, iclass 3/0 ums0: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM), rev 1.10/3.00, addr 4, iclass 3/1 ums0: 5 buttons and Z dir. Thank You Alden Louis-Pierre ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] nevermind, I manage to fix my problem. Thank You Alden Louis-Pierre ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Kernel Lock up
alden.pierre wrote: When it's time to compile the GENERIC kernel my system locks up, forcing me to reboot. Here is an output of dmesg. I'm running FreeBSD 4.10. I also can provide an attachment of the compiling output. Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.10-RELEASE #0: Tue May 25 22:47:12 GMT 2004 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/GENERIC Timecounter i8254 frequency 1193182 Hz CPU: Intel Pentium III (1000.04-MHz 686-class CPU) Origin = GenuineIntel Id = 0x68a Stepping = 10 Features=0x387f9ffFPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,PN,MMX,FXSR,SSE real memory = 603914240 (589760K bytes) avail memory = 581242880 (567620K bytes) Preloaded elf kernel kernel at 0xc0551000. Pentium Pro MTRR support enabled md0: Malloc disk Using $PIR table, 7 entries at 0xc00fde80 npx0: math processor on motherboard npx0: INT 16 interface pcib0: Host to PCI bridge on motherboard pci0: PCI bus on pcib0 agp0: VIA 82C691 (Apollo Pro) host to PCI bridge mem 0xe800-0xebff at device 0.0 on pci0 pcib1: VIA 82C598MVP (Apollo MVP3) PCI-PCI (AGP) bridge at device 1.0 on pci0 pci1: PCI bus on pcib1 pci1: NVidia model 0110 graphics accelerator at 0.0 irq 10 isab0: VIA 82C686 PCI-ISA bridge at device 7.0 on pci0 isa0: ISA bus on isab0 atapci0: VIA 82C686 ATA100 controller port 0xd000-0xd00f at device 7.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 uhci0: VIA 83C572 USB controller port 0xd400-0xd41f irq 12 at device 7.2 on pci0 usb0: VIA 83C572 USB controller on uhci0 usb0: USB revision 1.0 uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhub1: Texas Instruments TUSB2046 hub, class 9/0, rev 1.10/1.25, addr 2 uhub1: 4 ports with 4 removable, self powered ukbd0: Logitech Logitech USB Keyboard, rev 1.10/15.00, addr 3, iclass 3/1 kbd0 at ukbd0 uhid0: Logitech Logitech USB Keyboard, rev 1.10/15.00, addr 3, iclass 3/0 ums0: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM), rev 1.10/3.00, addr 4, iclass 3/1 ums0: 5 buttons and Z dir. uhci1: VIA 83C572 USB controller port 0xd800-0xd81f irq 12 at device 7.3 on pci0 usb1: VIA 83C572 USB controller on uhci1 usb1: USB revision 1.0 uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered pci0: unknown card (vendor=0x1106, dev=0x3057) at 7.4 chip0: VIA 82C686 AC97 Audio port 0xe400-0xe403,0xe000-0xe003,0xdc00-0xdcff irq 11 at device 7.5 on pci0 rl0: RealTek 8139 10/100BaseTX port 0xec00-0xecff mem 0xee00-0xeeff irq 11 at device 15.0 on pci0 rl0: Ethernet address: 00:c0:26:62:97:06 miibus0: MII bus on rl0 rlphy0: RealTek internal media interface on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto orm0: Option ROMs at iomem 0xc-0xcc7ff,0xd-0xd3fff on isa0 pmtimer0 on isa0 fdc0: NEC 72065B or clone at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: 1440-KB 3.5 drive on fdc0 drive 0 atkbdc0: Keyboard controller (i8042) at port 0x60,0x64 on isa0 vga0: Generic ISA VGA at port 0x3c0-0x3df iomem 0xa-0xb on isa0 sc0: System console at flags 0x100 on isa0 sc0: VGA 16 virtual consoles, flags=0x300 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A ppc0: Parallel port at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode plip0: PLIP network interface on ppbus0 lpt0: Printer on ppbus0 lpt0: Interrupt-driven port ppi0: Parallel I/O on ppbus0 ad0: 38166MB ST340016A [77545/16/63] at ata0-master UDMA100 acd0: CD-RW CREATIVE CD-RW RW1210E at ata0-slave PIO4 acd1: DVD-ROM Pioneer DVD-ROM ATAPIModel DVD-104S 0123 at ata1-master PIO4 Mounting root from ufs:/dev/ad0s1a WARNING: / was not properly dismounted uhub1: at uhub0 port 2 (addr 2) disconnected ukbd0: detached uhid0: detached ums0: detached uhub1: detached uhub1: Texas Instruments TUSB2046 hub, class 9/0, rev 1.10/1.25, addr 2 uhub1: 4 ports with 4 removable, self powered ukbd0: Logitech Logitech USB Keyboard, rev 1.10/15.00, addr 3, iclass 3/1 kbd0 at ukbd0 uhid0: Logitech Logitech USB Keyboard, rev 1.10/15.00, addr 3, iclass 3/0 ums0: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM), rev 1.10/3.00, addr 4, iclass 3/1 ums0: 5 buttons and Z dir. Thank You Alden Louis-Pierre ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] Is there anything I can do about this? Thank You Alden Louis-Pierre ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Kernel Lock up
When it's time to compile the GENERIC kernel my system locks up, forcing me to reboot. Here is an output of dmesg. I'm running FreeBSD 4.10. I also can provide an attachment of the compiling output. Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.10-RELEASE #0: Tue May 25 22:47:12 GMT 2004 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/GENERIC Timecounter i8254 frequency 1193182 Hz CPU: Intel Pentium III (1000.04-MHz 686-class CPU) Origin = GenuineIntel Id = 0x68a Stepping = 10 Features=0x387f9ffFPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,PN,MMX,FXSR,SSE real memory = 603914240 (589760K bytes) avail memory = 581242880 (567620K bytes) Preloaded elf kernel kernel at 0xc0551000. Pentium Pro MTRR support enabled md0: Malloc disk Using $PIR table, 7 entries at 0xc00fde80 npx0: math processor on motherboard npx0: INT 16 interface pcib0: Host to PCI bridge on motherboard pci0: PCI bus on pcib0 agp0: VIA 82C691 (Apollo Pro) host to PCI bridge mem 0xe800-0xebff at device 0.0 on pci0 pcib1: VIA 82C598MVP (Apollo MVP3) PCI-PCI (AGP) bridge at device 1.0 on pci0 pci1: PCI bus on pcib1 pci1: NVidia model 0110 graphics accelerator at 0.0 irq 10 isab0: VIA 82C686 PCI-ISA bridge at device 7.0 on pci0 isa0: ISA bus on isab0 atapci0: VIA 82C686 ATA100 controller port 0xd000-0xd00f at device 7.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 uhci0: VIA 83C572 USB controller port 0xd400-0xd41f irq 12 at device 7.2 on pci0 usb0: VIA 83C572 USB controller on uhci0 usb0: USB revision 1.0 uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhub1: Texas Instruments TUSB2046 hub, class 9/0, rev 1.10/1.25, addr 2 uhub1: 4 ports with 4 removable, self powered ukbd0: Logitech Logitech USB Keyboard, rev 1.10/15.00, addr 3, iclass 3/1 kbd0 at ukbd0 uhid0: Logitech Logitech USB Keyboard, rev 1.10/15.00, addr 3, iclass 3/0 ums0: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM), rev 1.10/3.00, addr 4, iclass 3/1 ums0: 5 buttons and Z dir. uhci1: VIA 83C572 USB controller port 0xd800-0xd81f irq 12 at device 7.3 on pci0 usb1: VIA 83C572 USB controller on uhci1 usb1: USB revision 1.0 uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered pci0: unknown card (vendor=0x1106, dev=0x3057) at 7.4 chip0: VIA 82C686 AC97 Audio port 0xe400-0xe403,0xe000-0xe003,0xdc00-0xdcff irq 11 at device 7.5 on pci0 rl0: RealTek 8139 10/100BaseTX port 0xec00-0xecff mem 0xee00-0xeeff irq 11 at device 15.0 on pci0 rl0: Ethernet address: 00:c0:26:62:97:06 miibus0: MII bus on rl0 rlphy0: RealTek internal media interface on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto orm0: Option ROMs at iomem 0xc-0xcc7ff,0xd-0xd3fff on isa0 pmtimer0 on isa0 fdc0: NEC 72065B or clone at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: 1440-KB 3.5 drive on fdc0 drive 0 atkbdc0: Keyboard controller (i8042) at port 0x60,0x64 on isa0 vga0: Generic ISA VGA at port 0x3c0-0x3df iomem 0xa-0xb on isa0 sc0: System console at flags 0x100 on isa0 sc0: VGA 16 virtual consoles, flags=0x300 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A ppc0: Parallel port at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode plip0: PLIP network interface on ppbus0 lpt0: Printer on ppbus0 lpt0: Interrupt-driven port ppi0: Parallel I/O on ppbus0 ad0: 38166MB ST340016A [77545/16/63] at ata0-master UDMA100 acd0: CD-RW CREATIVE CD-RW RW1210E at ata0-slave PIO4 acd1: DVD-ROM Pioneer DVD-ROM ATAPIModel DVD-104S 0123 at ata1-master PIO4 Mounting root from ufs:/dev/ad0s1a WARNING: / was not properly dismounted uhub1: at uhub0 port 2 (addr 2) disconnected ukbd0: detached uhid0: detached ums0: detached uhub1: detached uhub1: Texas Instruments TUSB2046 hub, class 9/0, rev 1.10/1.25, addr 2 uhub1: 4 ports with 4 removable, self powered ukbd0: Logitech Logitech USB Keyboard, rev 1.10/15.00, addr 3, iclass 3/1 kbd0 at ukbd0 uhid0: Logitech Logitech USB Keyboard, rev 1.10/15.00, addr 3, iclass 3/0 ums0: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM), rev 1.10/3.00, addr 4, iclass 3/1 ums0: 5 buttons and Z dir. Thank You Alden Louis-Pierre ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]