-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi there, first of all, I'm using FreeBSD-5.4-RELENG-p2 and have gtkam-0.1.12_4 installed, it starts up nice but can not find my Konica-Minolta DiMAGE E500 camera !
My problem is, that I get the output dump after plug in the USB cable and switching the camera ON. What other settings do I may need ? do I need some settings in /etc/devd.conf ??? I was googeling around for two days now, and can't find any postings about this problem. (by the way, this camera is NOT listed in the gphoto or gtkam list) thanks for any help Hanno umass0: KM DiMAGE E500, rev 1.10/0.00, addr 2 da0 at umass-sim0 bus 0 target 0 lun 0 da0: <KM DiMAGE E500 1.10> Removable Direct Access SCSI-0 device da0: 1.000MB/s transfers da0: 122MB (250368 512 byte sectors: 64H 32S/T 122C) umass0: Phase Error, residue = 0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0 umass0: Phase Error, residue = 0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0 umass0: Phase Error, residue = 0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0 umass0: Phase Error, residue = 0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0 umass0: Phase Error, residue = 0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0 umass0: Phase Error, residue = 0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0 umass0: Phase Error, residue = 0 (da0:umass-sim0:0:0:0): Synchronize cache failed, status == 0x4, scsi status == 0x0 ## my /etc/rc.conf settings: devd_enable="YES" devfs_system_ruleset="usb_devices" removable_interfaces="an0 cbb0 cbb1 ed0 ed1 fd0 cd0 da0" usbd_enable="YES" ugen_load="YES" umass_load="YES" ## my /etc/fstab settings: /dev/da0s1a /mnt/camera msdosfs rw,noauto 0 0 ## my /etc/devdf.conf settings: perm usb0 0660 own usb0 root:usb perm usb1 0660 own usb1 root:usb ## kernel settings: # SCSI peripherals device scbus # SCSI bus (required for SCSI) device ch # SCSI media changers device da # Direct Access (disks) device sa # Sequential Access (tape etc) device cd # CD device pass # Passthrough (direct SCSI access) device ses # SCSI Envir. Services (and SAF-TE) # USB support device uhci # UHCI PCI->USB interface device ohci # OHCI PCI->USB interface device ehci # EHCI PCI->USB interface (USB 2.0) device usb # USB Bus (required) #device udbp # USB Double Bulk Pipe devices device ugen # Generic device uhid # "Human Interface Devices" device ukbd # Keyboard device ulpt # Printer device umass # Disks/Mass storage-Requires scbus + da device ums # Mouse device urio # Diamond Rio 500 MP3 player device uscanner # Scanners -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.1 (FreeBSD) Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org iD8DBQFCvntUBG3FBOpOS2oRAp0GAJ9TpG4c9ZeiSqwGIzjQVlw99Y4ovwCdE0j9 SFsta9IycHmOOM6BceagpAc= =5F8Y -----END PGP SIGNATURE----- ___________________________________________________________ Yahoo! Messenger - NEW crystal clear PC to PC calling worldwide with voicemail http://uk.messenger.yahoo.com _______________________________________________ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
