mpd problem - CCP: rec'd Reset Request
Hello, There's a problem with my MPD which I cannot reproduce but it appears from time to time. Here's complete session log and mpd configs: Mar 10 08:26:23 tazek mpd: [pptp] using interface ng0 Mar 10 08:26:23 tazek mpd: [pptp] link: OPEN event Mar 10 08:26:23 tazek mpd: [pptp] LCP: Open event Mar 10 08:26:23 tazek mpd: [pptp] LCP: state change Initial -- Starting Mar 10 08:26:23 tazek mpd: [pptp] LCP: LayerStart Mar 10 08:26:23 tazek mpd: pptp0: connecting to 193.33.48.3 1723 Mar 10 08:26:23 tazek mpd: pptp0: connected to 193.33.48.3 1723 Mar 10 08:26:23 tazek mpd: pptp0: attached to connection with 193.33.48.3 1723 Mar 10 08:26:23 tazek mpd: pptp0-0: outgoing call connected at 64000 bps Mar 10 08:26:23 tazek mpd: [pptp] PPTP call successful Mar 10 08:26:24 tazek mpd: [pptp] link: UP event Mar 10 08:26:24 tazek mpd: [pptp] link: origination is local Mar 10 08:26:24 tazek mpd: [pptp] LCP: Up event Mar 10 08:26:24 tazek mpd: [pptp] LCP: state change Starting -- Req-Sent Mar 10 08:26:24 tazek mpd: [pptp] LCP: SendConfigReq #1 Mar 10 08:26:24 tazek mpd: ACFCOMP Mar 10 08:26:24 tazek mpd: PROTOCOMP Mar 10 08:26:24 tazek mpd: ACCMAP 0x000a Mar 10 08:26:24 tazek mpd: MRU 1460 Mar 10 08:26:24 tazek mpd: MAGICNUM 50e25050 Mar 10 08:26:24 tazek mpd: [pptp] LCP: rec'd Configure Ack #1 (Req-Sent) Mar 10 08:26:24 tazek mpd: ACFCOMP Mar 10 08:26:24 tazek mpd: PROTOCOMP Mar 10 08:26:24 tazek mpd: ACCMAP 0x000a Mar 10 08:26:24 tazek mpd: MRU 1460 Mar 10 08:26:24 tazek mpd: MAGICNUM 50e25050 Mar 10 08:26:24 tazek mpd: [pptp] LCP: state change Req-Sent -- Ack-Rcvd Mar 10 08:26:26 tazek mpd: [pptp] LCP: state change Ack-Rcvd -- Req-Sent Mar 10 08:26:26 tazek mpd: [pptp] LCP: SendConfigReq #2 Mar 10 08:26:26 tazek mpd: ACFCOMP Mar 10 08:26:26 tazek mpd: PROTOCOMP Mar 10 08:26:26 tazek mpd: ACCMAP 0x000a Mar 10 08:26:26 tazek mpd: MRU 1460 Mar 10 08:26:26 tazek mpd: MAGICNUM 50e25050 Mar 10 08:26:26 tazek mpd: [pptp] LCP: rec'd Configure Ack #2 (Req-Sent) Mar 10 08:26:26 tazek mpd: ACFCOMP Mar 10 08:26:26 tazek mpd: PROTOCOMP Mar 10 08:26:26 tazek mpd: ACCMAP 0x000a Mar 10 08:26:26 tazek mpd: MRU 1460 Mar 10 08:26:26 tazek mpd: MAGICNUM 50e25050 Mar 10 08:26:26 tazek mpd: [pptp] LCP: state change Req-Sent -- Ack-Rcvd Mar 10 08:26:26 tazek mpd: [pptp] LCP: rec'd Configure Request #1 (Ack-Rcvd) Mar 10 08:26:26 tazek mpd: ACCMAP 0x Mar 10 08:26:26 tazek mpd: AUTHPROTO CHAP MSOFTv2 Mar 10 08:26:26 tazek mpd: MAGICNUM e11b37fd Mar 10 08:26:26 tazek mpd: PROTOCOMP Mar 10 08:26:26 tazek mpd: ACFCOMP Mar 10 08:26:26 tazek mpd: [pptp] LCP: SendConfigAck #1 Mar 10 08:26:26 tazek mpd: ACCMAP 0x Mar 10 08:26:26 tazek mpd: AUTHPROTO CHAP MSOFTv2 Mar 10 08:26:26 tazek mpd: MAGICNUM e11b37fd Mar 10 08:26:26 tazek mpd: PROTOCOMP Mar 10 08:26:26 tazek mpd: ACFCOMP Mar 10 08:26:26 tazek mpd: [pptp] LCP: state change Ack-Rcvd -- Opened Mar 10 08:26:26 tazek mpd: [pptp] LCP: auth: peer wants CHAP, I want nothing Mar 10 08:26:26 tazek mpd: [pptp] LCP: LayerUp Mar 10 08:26:26 tazek mpd: [pptp] CHAP: rec'd CHALLENGE #153 Mar 10 08:26:26 tazek mpd: Name: pptpd Mar 10 08:26:26 tazek mpd: Using authname u_sn_kpenergy Mar 10 08:26:27 tazek mpd: [pptp] CHAP: sending RESPONSE len:63 Mar 10 08:26:27 tazek mpd: [pptp] CHAP: rec'd SUCCESS #153 Mar 10 08:26:27 tazek mpd: MESG: S=8A3A5371D391A9E723EC05269806C81EA5F42125 Mar 10 08:26:27 tazek mpd: [pptp] LCP: authorization successful Mar 10 08:26:27 tazek mpd: [pptp] Bundle up: 1 link, total bandwidth 64000 bps Mar 10 08:26:27 tazek mpd: [pptp] IPCP: Open event Mar 10 08:26:27 tazek mpd: [pptp] IPCP: state change Initial -- Starting Mar 10 08:26:27 tazek mpd: [pptp] IPCP: LayerStart Mar 10 08:26:27 tazek mpd: [pptp] CCP: Open event Mar 10 08:26:27 tazek mpd: [pptp] CCP: state change Initial -- Starting Mar 10 08:26:27 tazek mpd: [pptp] CCP: LayerStart Mar 10 08:26:27 tazek mpd: [pptp] IPCP: Up event Mar 10 08:26:27 tazek mpd: [pptp] IPCP: state change Starting -- Req-Sent Mar 10 08:26:27 tazek mpd: [pptp] IPCP: SendConfigReq #1 Mar 10 08:26:27 tazek mpd: IPADDR 192.168.132.26 Mar 10 08:26:27 tazek mpd: COMPPROTO VJCOMP, 16 comp. channels, no comp-cid Mar 10 08:26:27 tazek mpd: [pptp] CCP: Up event Mar 10 08:26:27 tazek mpd: [pptp] CCP: state change Starting -- Req-Sent Mar 10 08:26:27 tazek mpd: [pptp] CCP: SendConfigReq #1 Mar 10 08:26:27 tazek mpd: MPPC Mar 10 08:26:27 tazek mpd:0x0140:MPPE(128 bits), stateless Mar 10 08:26:27 tazek mpd: [pptp] can't get stats, link=0: Invalid argument Mar 10 08:26:27 tazek mpd: [pptp] CCP: rec'd Configure Request #1 (Req-Sent) Mar 10 08:26:27 tazek mpd: MPPC Mar 10 08:26:27 tazek mpd:0x0140:MPPE(128 bits), stateless Mar 10 08:26:27 tazek mpd: [pptp] CCP: SendConfigAck #1 Mar 10 08:26:27 tazek mpd: MPPC Mar 10 08:26:27 tazek mpd:0x0140:MPPE(128 bits), stateless Mar 10 08:26:27 tazek mpd: [pptp] CCP: state change Req-Sent -- Ack-Sent Mar 10 08:26:27 tazek mpd: [pptp] IPCP:
Re: mpd problem
On Wednesday 28 December 2005 16:59, Mile wrote: Hi, I have a FreeBSD computer acting as gateway to windows clients Some sites like msn.com, opera.com, hp.com, najdi.si dont work on LAN... because of MTU problem. If i set MTU to 1492 instead of default 1500 then this sites work! (on windows) (If i use userland pppoe then everything works without setting MTU on LAN. (itself has an option mssfixup).) I tried with adding set iface enable tcpmssfix to mpd.conf as described in mpd documentation, but it still doesnt work... msn.com and opera.com work now... but others dont. There is a netgraph node that changes MSS in FreeBSD-6 and it works fine. Read ng_tcpmss(4). If you are using FreeBSD-5, google it. HTH, Nikos mpd.conf (Version 3.18) default: load PPPoE PPPoE: new -i ng0 PPPoE PPPoE set iface addrs 1.1.1.1 2.2.2.2 set iface route default set iface disable on-demand set iface idle 0 set bundle disable multilink set bundle authname xxx set link no acfcomp protocomp set link disable pap chap set link accept chap set link mtu 1492 set link keep-alive 10 60 set ipcp yes vjcomp set ipcp ranges 0.0.0.0/0 0.0.0.0/0 set iface enable tcpmssfix open iface natd.conf interface ng0 dynamic yes use_sockets yes ipfw #natd /sbin/ipfw 15 add divert natd all from any to any via ng0 sysctl.conf security.bsd.see_other_uids=0 security.bsd.see_other_gids=0 security.bsd.unprivileged_read_msgbuf=0 net.inet.tcp.blackhole=2 net.inet.udp.blackhole=1 vm.swap_idle_enabled=1 kern.ipc.maxsockbuf=2097152 kern.ipc.somaxconn=2048 kern.maxfiles=65536 kern.maxfilesperproc=32768 net.inet.tcp.rfc1323=0 net.inet.tcp.delayed_ack=0 net.inet.tcp.sendspace=32768 net.inet.tcp.recvspace=32768 net.inet.udp.recvspace=32768 net.inet.udp.maxdgram=57344 net.local.stream.recvspace=32768 net.local.stream.sendspace=32768 net.inet.icmp.drop_redirect=1 net.inet.icmp.log_redirect=1 net.inet.ip.redirect=1 net.inet6.ip6.redirect=0 net.inet.ip.sourceroute=1 net.inet.ip.accept_sourceroute=1 net.link.ether.inet.max_age=1200 net.inet.icmp.bmcastecho=0 #net.inet.tcp.drop_synfin=1 net.inet.ip.fw.verbose=1 If you need any more info please contact me. thanks, Brane ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
mpd problem
Hi, I have a FreeBSD computer acting as gateway to windows clients Some sites like msn.com, opera.com, hp.com, najdi.si dont work on LAN... because of MTU problem. If i set MTU to 1492 instead of default 1500 then this sites work! (on windows) (If i use userland pppoe then everything works without setting MTU on LAN. (itself has an option mssfixup).) I tried with adding set iface enable tcpmssfix to mpd.conf as described in mpd documentation, but it still doesnt work... msn.com and opera.com work now... but others dont. mpd.conf (Version 3.18) default: load PPPoE PPPoE: new -i ng0 PPPoE PPPoE set iface addrs 1.1.1.1 2.2.2.2 set iface route default set iface disable on-demand set iface idle 0 set bundle disable multilink set bundle authname xxx set link no acfcomp protocomp set link disable pap chap set link accept chap set link mtu 1492 set link keep-alive 10 60 set ipcp yes vjcomp set ipcp ranges 0.0.0.0/0 0.0.0.0/0 set iface enable tcpmssfix open iface natd.conf interface ng0 dynamic yes use_sockets yes ipfw #natd /sbin/ipfw 15 add divert natd all from any to any via ng0 sysctl.conf security.bsd.see_other_uids=0 security.bsd.see_other_gids=0 security.bsd.unprivileged_read_msgbuf=0 net.inet.tcp.blackhole=2 net.inet.udp.blackhole=1 vm.swap_idle_enabled=1 kern.ipc.maxsockbuf=2097152 kern.ipc.somaxconn=2048 kern.maxfiles=65536 kern.maxfilesperproc=32768 net.inet.tcp.rfc1323=0 net.inet.tcp.delayed_ack=0 net.inet.tcp.sendspace=32768 net.inet.tcp.recvspace=32768 net.inet.udp.recvspace=32768 net.inet.udp.maxdgram=57344 net.local.stream.recvspace=32768 net.local.stream.sendspace=32768 net.inet.icmp.drop_redirect=1 net.inet.icmp.log_redirect=1 net.inet.ip.redirect=1 net.inet6.ip6.redirect=0 net.inet.ip.sourceroute=1 net.inet.ip.accept_sourceroute=1 net.link.ether.inet.max_age=1200 net.inet.icmp.bmcastecho=0 #net.inet.tcp.drop_synfin=1 net.inet.ip.fw.verbose=1 If you need any more info please contact me. thanks, Brane ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
MPD-problem.
Hi folks. I have a problem with mpd on a server. It seems that the vpnclient cannot accept icmp connections from other than the mpd-server. * I can ping from 192.168.0.1 (The server) to 192.168.0.201 (The client) * I can NOT ping from 192.168.0.200 (Another server) to 192.168.0.201 (The client) * Changing the clients address to 192.168.0.101 does not help. * Firewall rules is disabled, so this should not be the cause. tcpdump says: 00:00:52.540628 192.168.0.1 192.168.0.200: icmp: 192.168.0.201 unreachable - need to frag (mtu1396) (DF) (ttl64, id57189, len56) - mpd.conf - default: load pptp0 pptp_common: set iface disable on-demand set iface enable proxy-arp set bundle disable multilink set link yes acfcomp protocomp set link no pap chap # CHAP authentication set link enable chap set link keep-alive 60 180 set ipcp yes vjcomp # set ipcp dns 217.13.4.24 #NetBIOS Server address #set ipcp nbns 192.168.03.1 #Compression and encryption set bundle enable compression set ccp yes mppc # set ccp yes mpp-e40 # set ccp no mpp-e40 set ccp yes mpp-e128 set ccp yes mpp-stateless set bundle yes crypt-reqd pptp0: new -i ng0 pptp0 pptp0 set ipcp ranges 192.168.0.1/32 192.168.0.201/32 load pptp_common - mpd.links - pptp0: set link type pptp set pptp self x.x.x.x set pptp enable incoming set pptp disable originate Thanks in advance! -- Geir Inge Imsland Copyleft Solutions AS [EMAIL PROTECTED]mob: +4747647074 ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
